[mrtg] weird stuff going on with 5300s

[jason]

im wondering if anyone has encountered this problem before.
we have 2 5300 and snmp is working great on one and not at all on the
second. they are both configured the same with the exception of a
different version of IOS, is this a possible cisco MIB bug, i think i read
of one a while ago, i will research that more.

a little about my mrtg /net-snmp setup it is on debian and seems to be
running fine, i have added my cisco pop management and voice mib to
/usr/share/snmp/mibs. the net-snmp doc is bad, so im not 100% sure if
these mibs loaded but i think so because 1 5300 is working.

thanks for any input!

the working one is:
IOS (tm) 5300 Software (C5300-IS-M), Version 12.2(13)T,  RELEASE SOFTWARE
(fc1)

no problems.

the 5300 that doesnt work gives the the following:
IOS (tm) 5300 Software (C5300-IS-M), Version 12.2(2)XB8, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
when i run cfgmaker
cfgmaker public at 127.0.0.1 --output=rome5300.cfg
--base: Get Device Info on public at 127.0.0.1:
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
                  community: "public"
                 request ID: -1410824829
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 456
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on
public at 127.0.0.1:
at /usr/bin/cfgmaker line 657
--base: Vendor Id: 
--base: Populating confcache
--snpo: Skipping ifName scanning because public at 80.68.200.98: does not
seem to support it
--snpo: Skipping ifDescr scanning because public at 80.68.200.98: does not
seem to support it
--snpo: Skipping ipAdEntIfIndex scanning because public at 80.68.200.98: does
not seem to support it
--snpo: Skipping ifType scanning because public at 80.68.200.98: does not
seem to support it
--snpo: Skipping ifPhysAddress scanning because public at 80.68.200.98: does
not seem to support it
--base: Get Interface Info
--base: Walking ifIndex



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi