[mrtg] Monitoring PIX Interfaces

[Gordon Ross]

Hi,

I'm running MRTG on Solaris, and I'm trying to monitor the bandwidth useage on a PIX 515e.

On the PIX, I've got the following configuration entries:

nameif ethernet0 outside security0
nameif ethernet1 inside security100
name 192.168.24.6 Excalibur
snmp-server host inside Excalibur poll
snmp-server community public
snmp-server enable traps

In mrtg, I have the following config:

PageTop[pix]: <H1>Internet</H1>
Target[pix]: #outside:public at pix1
MaxBytes[pix]: 1250000
Title[pix]: Cisco PIX

[outside is the name of the inteface to be monitored, the SNMP packets come in on the inside interface]

However, whenever I run mrtg, the mrtg process maxes out the CPU, and nothing appears in the logs.

Thoughts ?

Thanks,

GTG

Gordon Ross,
Network Manager/Rheolwr Rhydwaith
Countryside Council for Wales/Cyngor Cefn Gwlad Cymru

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi