[mrtg] Re: FW: Monitoring CPU of Cisco 2610

[Brander, Eric]

The error is correct, there is no option "legendl".

Quick answer, everyone likes those:  change it to Legend1 (that is the
numeral one)

Amazing how useful error messages can be when you actually read them.

Eric Brander
ACS
Texas CHIP Account
Sr. Communications Engineer - Information Systems Department
512.336.3331
Eric dot Brander at acs-inc dot com


-----Original Message-----
From: Kevin Wong [mailto:KWong at PaceWildenstein.com]
Sent: Thursday, April 17, 2003 11:09 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] FW: Monitoring CPU of Cisco 2610


Thank you all helping out.
Now I am getting this error after I make the following adjustment.
ERROR: CFG Error Unknown Option "legendl" on line 41 or above.

I added a : to end of each option [x}, changed the o to 0, and changed
Unsealed to unscaled. It now looks like this:
 
Target[192.168.4.1]:1.3.6.1.4.1.9.2.1.58.0&l.3.6.1.4.1.9.2.1.58.0:public at 192
.168.4.1
RouterUptime[192.168.4.1]: public at 192.168.4.1
MaxBytes[192.168.4.1]: 100
Title[192.168.4.1]: CPU LOAD
PageTop[192.168.4.1]: <H1>CPU Load </H1>
Unscaled[192.168.4.1]: ymwd
ShortLegend[192.168.4.1]: 
XSize[192.168.4.1]: 380
YSize[192.168.4.1]: 100
YLegend[192.168.4.1]: CPU Utilization
Legendl[192.168.4.1]: CPU Utilization in % (Load)
Legend2[192.168.4.1]: CPU Utilization in % (Load)
Legend3[192.168.4.1]:
Legend4[192.168.4.1]:
Legendl[192.168.4.1]:
LegendO[192.168.4.1]: &nbsp;Usage
Options[192.168.4.1]: gauge


Kevin


-----Original Message-----
From: Walid Khalil [mailto:Walid at acconline.com]
Sent: Thursday, April 17, 2003 10:41 AM
To: Kevin Wong
Subject: RE: [mrtg] Monitoring CPU of Cisco 2610


You need a : after the YLegend[x]: 

	-----Original Message----- 
	From: Kevin Wong [mailto:KWong at PaceWildenstein.com] 
	Sent: Thu 4/17/2003 10:27 AM 
	To: mrtg at list.ee.ethz.ch 
	Cc: 
	Subject: [mrtg] Monitoring CPU of Cisco 2610
	
	

	Hi Everyone,
	I am new here. 
	I've being successfully monitoring the port traffic using MRTG for 6
months
	or so from a windows 2000 workstation.  When I try to monitor the
CPU on the
	2610 router, I get this "CFG error unknown option on "unsealed" on
line xx
	and ERROR: Line 39 (YLegend[192.168.4.1] CPU Utilization) in CFG
file
	(mrtg.cfg)  does not make senses; and nothing is plotted.  I guess
MRTG
	wasn't able to obtain the information from 2610.  What have I done
wrong?
	Please help. I appreciate any inputs.  Below is my mrtg.cfg content.
	
	Thanks,
	
	Kevin
	----------------------------------------------
	WorkDir: d:\www\mrtg
	# Created by
	# cfgmaker public at 192.168.4.1 --global 'WorkDir: d:\www\mrtg'
--output
	mrtg.cfg
	
	
	# Router CPU load
	
Target[192.168.4.1]:1.3.6.1.4.1.9.2.1.58.O&l.3.6.1.4.1.9.2.1.58.0:public at 192
	.168.4.1
	RouterUptime[192.168.4.1]: public at 192.168.4.1
	MaxBytes[192.168.4.1]: 100
	Title[192.168.4.1]: CPU LOAD
	PageTop[192.168.4.1]: <H1>CPU Load </H1>
	#Unsealed[192.168.4.1]: ymwd
	ShortLegend[192.168.4.1]:
	XSize[192.168.4.1]: 380
	YSize[192.168.4.1]: 100
	YLegend[192.168.4.1] CPU Utilization
	Legendl[192.168.4.1] CPU Utilization in % (Load)
	Legend2[192.168.4.1] CPU Utilization in % (Load)
	Legend3[192.168.4.1]
	Legend4[192.168.4.1]
	Legendl[192.168.4.1]
	LegendO[192.168.4.1] &nbsp;Usage
	Options[192.168.4.1] gauge
	
	--
	Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
	Archive     http://www.ee.ethz.ch/~slist/mrtg
	FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
	WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
	
	

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi