[mrtg] Re: 6513 Sup2 OID

[Samson Martinez]

Thanks for the prompt reply! I thought this was the general area as well
but that OID is not available. Here's what I get when I walk
1.3.6.1.4.1.9.5.1.1:

> snmpwalk -c community -v 2c 10.94.0.2 1.3.6.1.4.1.9.5.1.1
SNMPv2-SMI::enterprises.9.5.1.1.8.0 = INTEGER: 1
SNMPv2-SMI::enterprises.9.5.1.1.19.0 = INTEGER: 5
SNMPv2-SMI::enterprises.9.5.1.1.20.0 = Timeticks: (856864558) 99 days,
4:10:45.58
SNMPv2-SMI::enterprises.9.5.1.1.24.0 = INTEGER: 2
SNMPv2-SMI::enterprises.9.5.1.1.25.0 = INTEGER: 2
SNMPv2-SMI::enterprises.9.5.1.1.32.1.1.1 = INTEGER: 1
SNMPv2-SMI::enterprises.9.5.1.1.32.1.2.1 = INTEGER: 1
SNMPv2-SMI::enterprises.9.5.1.1.32.1.3.1 = INTEGER: 5
SNMPv2-SMI::enterprises.9.5.1.1.32.1.4.1 = Timeticks: (856864558) 99
days, 4:10:45.58
SNMPv2-SMI::enterprises.9.5.1.1.53.0 = INTEGER: 1
SNMPv2-SMI::enterprises.9.5.1.1.67.0 = INTEGER: 2

Any ideas? Many thanks for all your assistance.

-Samson

-----Original Message-----
From: Walid Khalil [mailto:Walid at acconline.com] 
Sent: Thursday, August 07, 2003 2:19 PM
To: Samson Martinez
Subject: RE: [mrtg] 6513 Sup2 OID

I believe that's what you are looking for :
sysConfigSupervisorModuleNo (OID 1.3.6.1.4.1.9.5.1.1.52) from the
CISCO-STACK-MIB
 
Name: sysConfigSupervisorModuleNo

Type: OBJECT-TYPE

OID: 1.3.6.1.4.1.9.5.1.1.52

Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).cisco(9).work
group(5).ciscoStackMIB(1).systemGrp(1).sysConfigSupervisorModuleNo(52)

Module: CISCO-STACK-MIB

Parent: systemGrp

Prev sibling: sysStartupConfigSourceFile

Next sibling: sysStandbyPortEnable

Numerical syntax: Integer (32 bit)

Base syntax: INTEGER

Composed syntax: INTEGER

Status: current

Max access: read-write

Size list: 1: 1..2

Description: Indicates the supervisor module (active or standby, if

applicable) that the MIB objects sysConfigRegister,

sysBootVariable, sysStartupConfigSource, and

sysStartupConfigSourceFile are specified for.

This MIB object is only supported by the supervisor

modules with the flash file system feature support. The

default value for this MIB object is set to the active

supervisor module number.

Regards,
Walid

	-----Original Message----- 
	From: Samson Martinez [mailto:smartine at motive.com] 
	Sent: Thu 8/7/2003 1:20 PM 
	To: mrtg at list.ee.ethz.ch 
	Cc: 
	Subject: [mrtg] 6513 Sup2 OID
	
	

	Hello,
	
	
	Does anyone happen to know what OIDs, if any, would allow me to
track
	the active/standby status of Supervisory 2 modules. These are
installed
	in a Cisco 6513 switch.
	
	
	
	Thanks!
	
	
	
	-Samson
	
	
	--
	Unsubscribe
mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
	Archive     http://www.ee.ethz.ch/~slist/mrtg
	FAQ         http://faq.mrtg.org    Homepage
http://www.mrtg.org
	WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
	
	


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi