[mrtg] Re: 6513 Sup2 OID

Thu Aug 7 23:56:16 MEST 2003

Yep, that was it. Thanks!!!!

-Samson

-----Original Message-----
From: Walid Khalil [mailto:Walid at acconline.com] 
Sent: Thursday, August 07, 2003 4:55 PM
To: Samson Martinez
Subject: RE: [mrtg] Re: 6513 Sup2 OID

Hi Samson,
I believe the previous OID I sent wasn't the correct one. You might need
to try the following one. 

Name: moduleStandbyStatus

Type: OBJECT-TYPE

OID: 1.3.6.1.4.1.9.5.1.3.1.1.21

Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).cisco(9).work
group(5).ciscoStackMIB(1).moduleGrp(3).moduleTable(1).moduleEntry(1).mod
uleStandbyStatus(21)

Module: CISCO-STACK-MIB

Parent: moduleEntry

Prev sibling: moduleSwVersion

Next sibling: moduleIPAddress

Numerical syntax: Integer (32 bit)

Base syntax: INTEGER

Composed syntax: INTEGER

Status: current

Max access: read-only

Value list: 1: other(1) 

2: active(2) 

3: standby(3) 

4: error(4) 

Description: Redundant status of a module that supports redundancy

	-----Original Message----- 
	From: Samson Martinez [mailto:smartine at motive.com] 
	Sent: Thu 8/7/2003 5:06 PM 
	To: Samson Martinez; Walid Khalil 
	Cc: mrtg at list.ee.ethz.ch 
	Subject: RE: [mrtg] Re: 6513 Sup2 OID

	Sorry, that was pretty ugly. Hopefully this works:

	smartine at kenya> snmpwalk -c Aremo,Shitai -v 2c 10.94.0.2
	1.3.6.1.4.1.9.5.1.1
	SNMPv2-SMI::enterprises.9.5.1.1.8.0 = INTEGER: 1
	SNMPv2-SMI::enterprises.9.5.1.1.19.0 = INTEGER: 5
	SNMPv2-SMI::enterprises.9.5.1.1.20.0 = Timeticks: (856864558) 99
days,
	4:10:45.58
	SNMPv2-SMI::enterprises.9.5.1.1.24.0 = INTEGER: 2
	SNMPv2-SMI::enterprises.9.5.1.1.25.0 = INTEGER: 2
	SNMPv2-SMI::enterprises.9.5.1.1.32.1.1.1 = INTEGER: 1
	SNMPv2-SMI::enterprises.9.5.1.1.32.1.2.1 = INTEGER: 1
	SNMPv2-SMI::enterprises.9.5.1.1.32.1.3.1 = INTEGER: 5
	SNMPv2-SMI::enterprises.9.5.1.1.32.1.4.1 = Timeticks:
(856864558) 99
	days, 4:10:45.58
	SNMPv2-SMI::enterprises.9.5.1.1.53.0 = INTEGER: 1
	SNMPv2-SMI::enterprises.9.5.1.1.67.0 = INTEGER: 2

	-Samson

	-----Original Message-----
	From: Samson Martinez
	Sent: Thursday, August 07, 2003 4:04 PM
	To: Walid Khalil
	Cc: mrtg at list.ee.ethz.ch
	Subject: [mrtg] Re: 6513 Sup2 OID

	Thanks for the prompt reply! I thought this was the general area
as well
	but that OID is not available. Here's what I get when I walk
	1.3.6.1.4.1.9.5.1.1:

	> snmpwalk -c community -v 2c 10.94.0.2 1.3.6.1.4.1.9.5.1.1
	SNMPv2-SMI::enterprises.9.5.1.1.8.0 = INTEGER: 1
	SNMPv2-SMI::enterprises.9.5.1.1.19.0 = INTEGER: 5
	SNMPv2-SMI::enterprises.9.5.1.1.20.0 = Timeticks: (856864558) 99
days,
	4:10:45.58
	SNMPv2-SMI::enterprises.9.5.1.1.24.0 = INTEGER: 2
	SNMPv2-SMI::enterprises.9.5.1.1.25.0 = INTEGER: 2
	SNMPv2-SMI::enterprises.9.5.1.1.32.1.1.1 = INTEGER: 1
	SNMPv2-SMI::enterprises.9.5.1.1.32.1.2.1 = INTEGER: 1
	SNMPv2-SMI::enterprises.9.5.1.1.32.1.3.1 = INTEGER: 5
	SNMPv2-SMI::enterprises.9.5.1.1.32.1.4.1 = Timeticks:
(856864558) 99
	days, 4:10:45.58
	SNMPv2-SMI::enterprises.9.5.1.1.53.0 = INTEGER: 1
	SNMPv2-SMI::enterprises.9.5.1.1.67.0 = INTEGER: 2

	Any ideas? Many thanks for all your assistance.

	-Samson

	-----Original Message-----
	From: Walid Khalil [mailto:Walid at acconline.com]
	Sent: Thursday, August 07, 2003 2:19 PM
	To: Samson Martinez
	Subject: RE: [mrtg] 6513 Sup2 OID

	I believe that's what you are looking for :
	sysConfigSupervisorModuleNo (OID 1.3.6.1.4.1.9.5.1.1.52) from
the
	CISCO-STACK-MIB

	Name: sysConfigSupervisorModuleNo

	Type: OBJECT-TYPE

	OID: 1.3.6.1.4.1.9.5.1.1.52

	Full path:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).cisco(9).work

group(5).ciscoStackMIB(1).systemGrp(1).sysConfigSupervisorModuleNo(52)

	Module: CISCO-STACK-MIB

	Parent: systemGrp

	Prev sibling: sysStartupConfigSourceFile

	Next sibling: sysStandbyPortEnable

	Numerical syntax: Integer (32 bit)

	Base syntax: INTEGER

	Composed syntax: INTEGER

	Status: current

	Max access: read-write

	Size list: 1: 1..2

	Description: Indicates the supervisor module (active or standby,
if

	applicable) that the MIB objects sysConfigRegister,

	sysBootVariable, sysStartupConfigSource, and

	sysStartupConfigSourceFile are specified for.

	This MIB object is only supported by the supervisor

	modules with the flash file system feature support. The

	default value for this MIB object is set to the active

	supervisor module number.

	Regards,
	Walid

	        -----Original Message-----
	        From: Samson Martinez [mailto:smartine at motive.com]
	        Sent: Thu 8/7/2003 1:20 PM
	        To: mrtg at list.ee.ethz.ch
	        Cc:
	        Subject: [mrtg] 6513 Sup2 OID

	        Hello,

	        Does anyone happen to know what OIDs, if any, would
allow me to
	track
	        the active/standby status of Supervisory 2 modules.
These are
	installed
	        in a Cisco 6513 switch.

	        Thanks!

	        -Samson

	        --
	        Unsubscribe
	mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
	        Archive     http://www.ee.ethz.ch/~slist/mrtg
	        FAQ         http://faq.mrtg.org    Homepage
	http://www.mrtg.org
	        WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

	--
	Unsubscribe
mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
	Archive     http://www.ee.ethz.ch/~slist/mrtg
	FAQ         http://faq.mrtg.org    Homepage
http://www.mrtg.org
	WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi