[mrtg] MRTG VOIP problem

[mohammed subhan]

Hi,

I am totally new to MRTG.
My problem is i cannot take clear picture of
dial-peers(POTS/VOIP) and Controllers.

This the .cfg being created with.

This is what i am getting for dial-peer

### Interface 282 >> Descr: 'Voice-Over-IP-Peer:-3331'
| Name: 'VoiceOverIpPeer3331' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.282)
###     SNMPv1_Session (remote host: "216.236.xxx.xxx"
[216.236.xxx.xxx].161)
###                       community: "xxxxxx"
###                      request ID: -93419799
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from
interface when trying to query
# 
# Target[216.236.xxx.xxx_282]:
282:xxxxx at 216.236.xxx.xxx:
# SetEnv[216.236.xxx.xxx_282]: MRTG_INT_IP=""
MRTG_INT_DESCR="Voice-Over-IP-Peer:-3331"
# MaxBytes[216.236.xxx.xxx_282]: 0
# Title[216.236.xxx.xxx_282]: Traffic Analysis for 282
-- AS5350-KAB
# PageTop[216.236.xxx.xxx_282]: <H1>Traffic Analysis
for 282 -- AS5350-KAB</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>AS5350-KAB in
</TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#   
<TR><TD>Description:</TD><TD>Voice-Over-IP-Peer:-3331 
</TD></TR>
#    <TR><TD>ifType:</TD>     <TD>Voice Over IP
Encapulation (104)</TD></TR>
#    <TR><TD>ifName:</TD>    
<TD>VoiceOverIpPeer3331</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0
Bytes/s</TD></TR>
#  </TABLE>


This is what i am getting for Controller B-channel

### Interface 217 >> Descr: 'CAS-3/2:28' | Name:
'3/2:28' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.217)
###     SNMPv1_Session (remote host: "216.236.xxx.xxx"
[216.236.xxx.xxx].161)
###                       community: "xxxxxx"
###                      request ID: -93419860
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from
interface when trying to query
# 
# Target[216.236.xxx.xxx_217]:
217:xxxxx at 216.236.xxx.xxx:
# SetEnv[216.236.xxx.xxx_217]: MRTG_INT_IP=""
MRTG_INT_DESCR="CAS-3/2:28"
# MaxBytes[216.236.xxx.xxx_217]: 8000
# Title[216.236.xxx.xxx_217]: Traffic Analysis for 217
-- AS5350-KAB
# PageTop[216.236.xxx.xxx_217]: <H1>Traffic Analysis
for 217 -- AS5350-KAB</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>AS5350-KAB in
</TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>CAS-3/2:28 
</TD></TR>
#    <TR><TD>ifType:</TD>     <TD>AT&amp;T DS0 Point
(64 Kbps) (81)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>3/2:28</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>8000.0
Bytes/s</TD></TR>
#  </TABLE>


Apart from all these i would also want to have a look
on all possible monitoring schemes that can be done in
VOIP.


__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi