[mrtg] Re: Cisco 5509 Port Monitoring

[postmaster at gnvfc.net]

U may need to mention the OID including ur port no at the end like here
"......114.10" where 10 is ur 5509's physical port no for which u r trying
to monitorthe bandwidth.

----- Original Message -----
From: "Stephen" <stephen at belfastcityairport.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Monday, December 08, 2003 4:02 PM
Subject: [mrtg] Cisco 5509 Port Monitoring


Hi,
Recently I have decided to run mrtg to help gather some infomration on my
network. I am currently trying to monitor the bandwidth useage on each port
of my Cisco 5509. I have used the template available on Somix's site but i
am having trouble whenever i execute the script i customised.



SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.2.2.1.10.114)
SNMPv1_Session (remote host: "57.30.254.3" [57.30.254.3].161)
                  community: "bhdpub"
                 request ID: -217934435
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at D:/Mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 486
SNMPGET Problem for ifInOctets.114 ifOutOctets.114 sysUptime sysName on
bhdpub at 57.30.254.3::::::v4only at mrtg line 1798
ERROR: Target[a5509-m3p1][_IN_] ' $target->[0]{$mode} ' did not eval into
defined data
ERROR: Target[a5509-m3p1][_OUT_] ' $target->[0]{$mode} ' did not eval into
defined data
WARNING: Skipping Update of a5509-m3p1, inlast is not defined
WARNING: Skipping Update of a5509-m3p1, outlast is not defined



I have absolutely no idea what this means:) If anyone could shed some light
i would be most grateful!
Here is part of the config that i am currently using if it helps.


WorkDir: d:\output3
Refresh: 300
RunAsDaemon: Yes
EnableIPv6: no
Interval: 5

Target[A5509-M3P1]: 114:bhdpub at 57.30.254.3
MaxBytes[A5509-M3P1]:  12500000
Options[A5509-M3P1]:  bits, unknaszero
Title[A5509-M3P1]:  Fiber Port 1 (Module 3)
PageTop[A5509-M3P1]:  <H1>Fiber Port 1 (Module 3)</H1>
YLegend[A5509-M3P1]:  Port Utilization
LegendI[A5509-M3P1]:  In
LegendO[A5509-M3P1]:  Out
Legend1[A5509-M3P1]:  Inbound Bits
Legend2[A5509-M3P1]:  Outbound Bits
Legend3[A5509-M3P1]:  INBOUND Max value per interval on graph
Legend4[A5509-M3P1]:  OUTBOUND Max value per interval on graph
Colours[A5509-M3P1]:  GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[A5509-M3P1]:  ymw


Thanks to anyone who has read this far! If you know a better or even just
more information than i do about cisco 5509's with mrtg please drop me a
line.

Stephen Hughes

-------------------------------------------------------------
This email and any files transmitted with it are confidential
and intended solely for the use of the individual(s) to whom
it is addressed. Any views or opinions presented are solely
those of the author and do not necessarily represent those of
Belfast City Airport Limited unless otherwise stated.

If you are not the intended recipient, be advised that you
have received this email in error and that any use,
dissemination, forwarding, printing or copying of this email
is strictly prohibited, and that the email should be returned
to the sender.  If you are not the intended recipient please
contact postmaster at belfastcityairport.com.
--------------------------------------------------------------

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi