[mrtg] Re: [mrtg]SNMP2CA-STD/SNMP4tPC issues

[Garth Williams]

Hi.  The behaviour you mention sounds like GetIf is getting messed up.
My suggestion is to simply try to get GetIf going with just the BASE
MIBs.

Then, if you are using SNMP4W2K, then copy MSFT.MIB and PERFMIB.MIB into
the MIBS subdirectory below GetIf, or if you are using SNMP2CA, then
WTCS-MIB and SNMP2CA-STD-MIB (you might want to add file extensions).  

GetIf is an SNMPv1 compiler and sometimes gets messed up if there is an
SNMPv2 MIB in there, or an SNMPv1 MIB is syntactically (is that a WORD?)
incorrect.

Then, once it is working, add your MIBS to desired level, being careful
not to overfill.

Garth

-----Original Message-----
From: Jaun Keeve [mailto:Jaun.Keeve at 2cana.co.za] 
Sent: Tuesday, December 09, 2003 3:06 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: [mrtg]SNMP2CA-STD/SNMP4tPC issues

Hi

I am new to this and I don't seem to be getting any of it right!!

I have read the FAQ's, support pages and the history about the subject
in this mailing list and apologies in advance if this annoys anyone.

My first issue is this: I have installed SNMP4tPC and extracted the
mibs. Deleted the index file and started Getif. This works fine, then if
I close getif and open it again the OIDs are gone. I then have to delete
the index file again as I did above.

Secondly I install SNMP2CA-STD. This does nothing!! running
RmSnmpExt.exe does nothing and no new OIDs can be seen.

Also if I run the cfgmaker for mrtg none of the oids can be found, even
though I can see them in Getif. I run the command as follows perl
cfgmaker .1.3.6.1.2.1.1.3:public@[host_ip] --global "WorkDir:
c:\www\mrtg" --output mrtg.cfg

I have tried excluding the first 'dot', but nothing. The community name
is correct "public@[host_ip]", this returns values.

I know this is a mouthful, but any help would be appreciated

Many thanks

Jaun

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi