[mrtg] Re: Silly Question : how to get a 'default' value in the graphs

[Leen Smit]

Thanks for the help People, i already figured out what i needed to change...

I needed to have a fixed scale, and with just the AbsMax and MaxBytes (and
Unscaled) i just coulndt get what i wanted...
Below is how i finally got it right :

Target[pix]: 1:public at 193.172.16.1:
SetEnv[pix]: MRTG_INT_IP="193.173.55.66" MRTG_INT_DESCR="PIX Firewall
'outside' interface"
Unscaled[pix]: dwmy
MaxBytes[pix]: 250000
MaxBytes1[pix]: 8000
XSize[pix]: 450
YSize[pix]: 300
Title[pix]: Totale Lineload op PIXfirewall



----- Original Message -----
From: "Leen Smit" <leen at webmind.nl>
To: <mrtg at list.ee.ethz.ch>
Sent: Tuesday, February 11, 2003 1:07 PM
Subject: [mrtg] Silly Question : how to get a 'default' value in the graphs


> Hi There,
>
> ive been playing with the config files a bit, and there one thing that i
cant seem to get to work.
> We have a 2Mbit line here, but we are charged for anything over 128Mbit of
bandwidth that we use. So what i'd like, is to have a line in the graphs
reprisenting this value, so i can see when we are over our treshold.
> Can any one tell me where/how to do this??
>
>       Leen Smit
>
>
>
>       Leen Smit
>
>
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi