[mrtg] Re: RV: 3COM 3300 switch
Alegria, Luis
lalegria at ics-canada.net
Fri Feb 21 17:50:29 MET 2003
# Created by
# cfgmaker public at x.x.x.x
### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:\mrtgdata
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
######################################################################
# System: Main Switch 3300
# Description: 3Com SuperStack II
# Contact: Joe Dow
# Location: Aylmer Computer Room
######################################################################
Workdir: C:\Inetpub\wwwroot\rrds
LogFormat: rrdtool
PathAdd: C:\rrdtool\src\tool_release
LibAdd: C:\rrdtool\perl-shared
interval: 1
### Interface 8 >> Descr: 'RMON VLAN 1' | Name: '' | Ip: '' | Eth: '00-01'
###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
#
# Target[x.x.x.x_8]: 8:public at x.x.x.x:
# SetEnv[x.x.x.x_8]: MRTG_INT_IP="" MRTG_INT_DESCR="RMON VLAN 1"
# MaxBytes[x.x.x.x_8]: 0
# Title[x.x.x.x_8]: Traffic Analysis for 8 -- Main Switch 3300
# PageTop[x.x.x.x_8]: <H1>Traffic Analysis for 8 -- Main Switch 3300</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>Main Switch 3300 in Aylmer Computer
Room</TD></TR>
# <TR><TD>Maintainer:</TD> <TD>Jim C</TD></TR>
# <TR><TD>Description:</TD><TD>RMON VLAN 1 </TD></TR>
# <TR><TD>ifType:</TD> <TD>propVirtual (53)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR>
# </TABLE>
### Interface 65 >> Descr: '802.1Q Encapsulation Tag 0001' | Name: '' | Ip:
'' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
#
# Target[x.x.x.x_65]: 65:public at x.x.x.x:
# SetEnv[x.x.x.x_65]: MRTG_INT_IP="" MRTG_INT_DESCR="802.1Q Encapsulation
Tag 0001"
# MaxBytes[x.x.x.x_65]: 0
# Title[x.x.x.x_65]: Traffic Analysis for 65 -- Main Switch 3300
# PageTop[x.x.x.x_65]: <H1>Traffic Analysis for 65 -- Main Switch 3300</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>Main Switch 3300 in Aylmer Computer
Room</TD></TR>
# <TR><TD>Maintainer:</TD> <TD>Jim C</TD></TR>
# <TR><TD>Description:</TD><TD>802.1Q Encapsulation Tag 0001 </TD></TR>
# <TR><TD>ifType:</TD> <TD>propMultiplexor (54)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR>
# </TABLE>
### Interface 139 >> Descr: 'Local Workgroup Encapsulation Tag 15' | Name:
'' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
#
# Target[x.x.x.x_139]: 139:public at x.x.x.x:
# SetEnv[x.x.x.x_139]: MRTG_INT_IP="" MRTG_INT_DESCR="Local Workgroup
Encapsulation Tag 15"
# MaxBytes[x.x.x.x_139]: 0
# Title[x.x.x.x_139]: Traffic Analysis for 139 -- Main Switch 3300
# PageTop[x.x.x.x_139]: <H1>Traffic Analysis for 139 -- Main Switch
3300</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>Main Switch 3300 in Aylmer Computer
Room</TD></TR>
# <TR><TD>Maintainer:</TD> <TD>Jim C</TD></TR>
# <TR><TD>Description:</TD><TD>Local Workgroup Encapsulation Tag 15
</TD></TR>
# <TR><TD>ifType:</TD> <TD>propMultiplexor (54)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR>
# </TABLE>
### Interface 1025 >> Descr: 'RMON:10/100 Port 22 on Unit 1' | Name: '' |
Ip: '' | Eth: '' ###
Target[x.x.x.x_1025]: 1025:public at x.x.x.x:
SetEnv[x.x.x.x_1025]: MRTG_INT_IP="" MRTG_INT_DESCR="3com HUB4 -- Port:22"
MaxBytes[x.x.x.x_1025]: 12500000
Title[x.x.x.x_1025]: Traffic Analysis for PORT:22 -- 3com HUB4
PageTop[x.x.x.x_1025]: <div align="center"><center>
<table border="1" width="98%" height="87">
<tr>
<td width="14%" height="52"><p align="center"><font
face="Arial"><small><img src="ics.gif" alt="ICS" align="absmiddle"
width="120" height="60"></small></font></td>
<td width="76%" height="52"><p align="center"><strong><font
face="Arial"><big>Inbound and Outbound Traffic from HUB4 in 3COM Switch
PORT 22 </big></font></strong></td>
<td width="14%" height="52"><strong><big><p
align="center"></big></strong><font
face="Arial"><small><img src="ics.gif" alt="ICS" align="absmiddle"
width="120"
height="60"></small></font><strong><big></big></strong></td>
</tr>
<tr>
<td width="100%" colspan="3" height="23"><p align="center"><font
face="Arial"><big><big>For more
information on MRTG and this Monitor Program, call ICS HelpDesk At
Islington11-111-111</font></td>
</tr>
<tr>
<td width="100%" colspan="3" height="23"><p
align="center"><strong><font face="Arial"><medium><medium>Maintainer: Jim
Chamberlain === Max Speed: 12.5mbytes/s === Peer Ip:x.x.x.x:PORT
22</strong></font></td>
</tr>
</table>
</center></div>
<P></P>
Background[x.x.x.x_1025]: #5f9ea0
-----Original Message-----
From: Alegria, Luis [mailto:lalegria at ics-canada.net]
Sent: Friday, February 21, 2003 11:41 AM
To: Fabian Bustamante; Michael.Willems at xantic.net
Cc: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: RV: 3COM 3300 switch
It means:
You have to connect to the Switch first by either telnet or console, and
enable the management option within the switch. Once you do that your unit
it's ready to accept requests.
Luis Alegria
-----Original Message-----
From: Fabian Bustamante [mailto:FabianB1 at cartopel.com]
Sent: Friday, February 21, 2003 11:21 AM
To: Michael.Willems at xantic.net
Cc: mrtg at list.ee.ethz.ch
Subject: [mrtg] RV: 3COM 3300 switch
Hi Michael,
I'm beginner in mrtg. I don't know what you want to say with: "put
management on in the switch". Can you send me the mrtg config file (without
your community of course) please?
Regards,
Fabian.
-----Mensaje original-----
De: Michael Willems [mailto:Michael.Willems at xantic.net]
Enviado el: viernes 21 de febrero de 2003 4:41
Para: Fabian Bustamante; mrtg at list.ee.ethz.ch
Asunto: RE: [mrtg] 3COM 3300 switch
Please put management on in the switch. All the devices in vlan1 can access
the snmp management. I have the same switch and it works.
With kind regards,
Michael Willems
Xantic
P.O. Box 850
1200 AW Hilversum
The Netherlands
Witte Kruislaan 47
1217 AM Hilversum
Tel: +31 (0) 30 23 86607
Fax: +31 (0) 35 62 46671
Email: michael.willems at xantic.net
WWW: http://www.xantic.net
-----Original Message-----
From: Fabian Bustamante [mailto:FabianB1 at cartopel.com]
Sent: donderdag 20 februari 2003 22:16
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] 3COM 3300 switch
I tried to
connect a 3COM 3300 switch but It isn't possible. Can you help me to solve
this problem? What is the procedure for connecting these equipments?
Thanks.
Regards,
Fabián Bustamante.
ECUADOR.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list