[mrtg] Re: PIX-515 Graphs for CPU/Connections
Simon ter Veen
STVeen at RosenInspection.net
Tue Feb 25 09:45:52 MET 2003
Hi List :-)
I have a minor problem bur reading TFM did not help...
This is the line that i enter when making a new cfg file:
perl cfgmaker --show-op-down public at 192.168.100.100 --global 'HTMLdir: C:\mrtg\switch10 LOGdir: C:\mrtg\switch10\log IMAGEdir: C:\mrtg\switch10\image' --output C:\mrtg-2.9.25\bin\switch10.cfg
The cfg file is OK but when i wanna start it i get an error message:
ERROR: CFG Error in "htmldir", line 0: Html directory C:\mrtg\switch10 LOGdir: C:\mrtg\switch10\log IMAGEdir: C:\mrtg\switch10\image does not exist
in the cfg file these three entries are in one line...if i put them in three seperate lines manually everything works fine. What am i missing???
regards,
Simon ter Veen
www.roseninspection.net
-----Original Message-----
From: Bill Parker [mailto:dogbert at netnevada.net]
Sent: Tuesday, February 25, 2003 8:38 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] PIX-515 Graphs for CPU/Connections
Hi All,
When I use this in MRTG, I get graphs for the interfaces, but NO values
for the CPU Usage and Connections.
#####################################################################
#
# Section for PIX-515E Firewalls (Primary/Backup
#
#####################################################################
# to get bits instead of bytes and graphs growing to the right
Options[_]: growright, bits
######################################################################
# System: pix
# Description: Cisco PIX Firewall Version 6.2(2)
#
# Contact: Mark Gavin/Bill Parker
# Location:
######################################################################
Target[pix_515E.cpu]:
1.3.6.1.4.1.9.9.109.1.1.1.1.4.1&1.3.6.1.4.1.9.9.109.1.1.1.1.5.1:dbsinfo at 172.21.4.253
YLegend[pix_515E.cpu]: Percent
ShortLegend[pix_515E.cpu]: %
Legend1[pix_515E.cpu]: 1 Min. CPU Util.
Legend2[pix_515E.cpu]: 5 Min. CPU Util.
Legend3[pix_515E.cpu]: Maximum 1 Min. CPU Util.
Legend4[pix_515E.cpu]: Maximum 5 Min. CPU Util.
LegendI[pix_515E.cpu]: 1Min CPU:
LegendO[pix_515E.cpu]: 5Min CPU:
WithPeak[pix_515E.cpu]: ywm
MaxBytes[pix_515E.cpu]: 100
Options[pix_515E.cpu]: growright, gauge, nopercent
Title[pix_515E.cpu]: Pix PIX-515E CPU Utilization
#Directory[pix_515E.cpu]: PIX-515E
PageTop[pix_515E.cpu]: <H1>PIX-515E (Primary) CPU Utilization</H1>
<TABLE>
<TR><TD>System:</TD><TD>PIX-515E (Primary) </TD></TR>
<TR><TD>Description:</TD><TD>PIX-515E (Primary)</TD></TR>
<TR><TD>Maintainer:</TD><TD>Mark Gavin/Bill Parker</TD></TR>
<TR><TD>Resource:</TD><TD>PIX-515E CPU Usage</TD></TR>
</TABLE>
#---------------------------------------------------------------
# This Report File Template measures Connections on a PIX Firewall
# number of connections currently in use by the entire firewall
# Example CFGNAME : [DEVICE NAME]-cisco_pix_connections
Target[conn]:
1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.6&.1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.7:dbsinfo at 172.21.4.253
YLegend[conn]: Connections
ShortLegend[conn]: connections
MaxBytes[conn]: 50
Options[conn]: nopercent, gauge, unknaszero
Unscaled[conn]: dwmy
Legend1[conn]: PIX-515E (Primary) User Connections
Legend2[conn]: Max Connections since reboot
Legend3[conn]: Max value per interval on graph
Legend4[conn]: .
LegendI[conn]: Reading.
LegendO[conn]: Since Reboot.
Title[conn]: PIX Firewall
PageTop[conn]: <H1>PIX-515E Firewall (Primary) - Connection stats.</H1>
Colours[conn]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[conn]: ymw
### Interface 1 >> Descr: 'PIX Firewall 'outside' interface' | Name: '' |
Ip: '12.110.34.253' | Eth: '00-09-b7-f7-68-c0' ###
Target[172.21.4.253_1]: 1:dbsinfo at 172.21.4.253:
SetEnv[172.21.4.253_1]: MRTG_INT_IP="xx.xxx.xx.xxx" MRTG_INT_DESCR="PIX
Firewall 'outside' interface"
MaxBytes[172.21.4.253_1]: 12500000
Title[172.21.4.253_1]: Traffic Analysis for PIX-515E (Primary) - Outside
PageTop[172.21.4.253_1]: <H1>Traffic Analysis for PIX-515E (Primary) -
Outside</H1>
<TABLE>
<TR><TD>System:</TD> <TD>PIX-515E (Primary) </TD></TR>
<TR><TD>Maintainer:</TD> <TD>Mark Gavin/Bill Parker</TD></TR>
<TR><TD>Description:</TD><TD>PIX-515E Firewall 'outside' interface
(Primary)</TD></TR>
<TR><TD>ifType:</TD> <TD>Ethernet CSMA/CD</TD></TR>
<TR><TD>ifName:</TD> <TD>PIX-515E Outside Interface</TD></TR>
<TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR>
<TR><TD>Ip:</TD> <TD>xx.xxx.xx.xxx (External IP address for
PIX-515E (Primary))</TD></TR>
</TABLE>
### Interface 2 >> Descr: 'PIX Firewall 'inside' interface' | Name: '' |
Ip: '172.21.4.253' | Eth: '00-09-b7-f7-68-c1' ###
<TR><TD>System:</TD> <TD>PIX-515E (Primary) </TD></TR>
<TR><TD>Maintainer:</TD> <TD>Mark Gavin/Bill Parker</TD></TR>
<TR><TD>Description:</TD><TD>PIX-515E Firewall 'outside' interface
(Primary)</TD></TR>
<TR><TD>ifType:</TD> <TD>Ethernet CSMA/CD</TD></TR>
<TR><TD>ifName:</TD> <TD>PIX-515E Outside Interface</TD></TR>
<TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR>
<TR><TD>Ip:</TD> <TD>xx.xxx.xx.xxx (External IP address for
PIX-515E (Primary))</TD></TR>
</TABLE>
### Interface 2 >> Descr: 'PIX Firewall 'inside' interface' | Name: '' |
Ip: '172.21.4.253' | Eth: '00-09-b7-f7-68-c1' ###
Target[172.21.4.253_2]: 2:dbsinfo at 172.21.4.253:
SetEnv[172.21.4.253_2]: MRTG_INT_IP="172.21.4.253" MRTG_INT_DESCR="PIX
Firewall 'inside' interface"
MaxBytes[172.21.4.253_2]: 12500000
Title[172.21.4.253_2]: Traffic Analysis for PIX-515E (Primary) - Inside
PageTop[172.21.4.253_2]: <H1>Traffic Analysis for PIX-515E (Primary) -
Inside</H1>
<TABLE>
<TR><TD>System:</TD> <TD>PIX-515E (Primary) </TD></TR>
<TR><TD>Maintainer:</TD> <TD>Mark Gavin/Bill Parker</TD></TR>
<TR><TD>Description:</TD><TD>PIX-515E Firewall 'inside' interface
(Primary)</TD></TR>
<TR><TD>ifType:</TD> <TD>Ethernet CSMA/CD</TD></TR>
<TR><TD>ifName:</TD> <TD>PIX-515E Inside Interface</TD></TR>
<TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR>
<TR><TD>Ip:</TD> <TD>172.21.4.253 (Internal IP address for
PIX-515E (Primary))</TD></TR></TD></TR>
</TABLE>
### Interface 6 >> Descr: 'PIX Firewall 'Stateful_Failover' interface' |
Name: '' | Ip: '' | Eth: '00-e0-b6-06-99-38' ###
Target[172.21.4.253_6]: 6:dbsinfo at 172.21.4.253:
SetEnv[172.21.4.253_6]: MRTG_INT_IP="" MRTG_INT_DESCR="PIX Firewall
'Stateful_Failover' interface"
MaxBytes[172.21.4.253_6]: 12500000
Title[172.21.4.253_6]: Traffic Analysis for PIX-515E (Primary) - Failover
PageTop[172.21.4.253_6]: <H1>Traffic Analysis for PIX-515E (Primary) -
Failover</H1>
<TABLE>
<TR><TD>System:</TD> <TD>PIX-515E (Primary) </TD></TR>
<TR><TD>Maintainer:</TD> <TD>Mark Gavin/Bill Parker</TD></TR>
<TR><TD>Description:</TD><TD>PIX-515E Firewall 'Stateful Failover'
Interface</TD></TR>
<TR><TD>ifType:</TD> <TD>Ethernet CSMA/CD</TD></TR>
<TR><TD>ifName:</TD> <TD>PIX-515E Stateful Failover Interface</TD></TR>
<TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR>
</TABLE>
What am I doing wrong for the CPU and Connections, if someone could give me
a clue :)
-Bill
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list