[mrtg] [mrtg ]Re: bits option issue

[George Myshlyayev]

Thanks for your reply Patricia.  Unfortunately, changing tag does not solve
the problem because the value is still in b/s.  I noticed on my other server
that works fine, it automatically changed value and tag to Mb/s when it went
over 1 Mb barrier.

Any other ideas?

----- Original Message -----
From: "Patricia A. Malinowski" <pam43 at georgetown.edu>
To: "George Myshlyayev" <diehard at canada.com>
Sent: Wednesday, February 26, 2003 7:08 AM
Subject: Re: [mrtg] bits option issue


> I think if you change the 'tag' under the graph with
> ShortLegend[device]: Mb/s (or whatever you'd like to see) or you can use %
> to show percentages - try it, let me know.
> because the default is 'b/s' used for MAX, Average, and current.
> ----- Original Message -----
> From: "George Myshlyayev" <diehard at canada.com>
> To: <mrtg at list.ee.ethz.ch>
> Sent: Wednesday, February 26, 2003 2:52 AM
> Subject: [mrtg] bits option issue
>
>
> >
> > Hey guys, I'm using 'bits' option to display the traffic of my server.
> > Everything looks fine except for the fact that it doesn't change values
to
> > megabits when it goes above 1 megabit barrier.  It seems to be stuck at
kb
> > and I don't like that as I'd rather see values in megabits.  On my other
> > server using exactly same config, it works without a problem.  Both
> servers
> > use mrtg version 2.9.10.  Here's the Options[_] I use:
> >
> > Options[eth0]: nopercent,growright,bits
> >
> > Thanks in advance
> >
> > George
> >
> > --
> > Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> > Archive     http://www.ee.ethz.ch/~slist/mrtg
> > FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> > WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> >
> >
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi