[mrtg] Re: Weird Graphs

[Joel]

Hi Hakan,
if you get error as u told us then it is the problem of snmp.
Can u plz check that snmp is enabled on your lucent cbx?
Check which community is there in Lucent cbx?
if all is ok with Lucent then ping from mrtg server the ip address of lucent cbx..
also check have u put any type of firewall on mrtg server or not?
 
Joel
 "Hakan M. Durgut" <hakandurgut at bnet.net.tr> wrote:
Hi Again, 

I would very much apreciate your help about mrtg'ing high traffic. 

I get the following error with the 622.cfg file. Looks like my Lucent
CBX does not support SNMPv2... 

But the thing is I can get the right values ( high values ) with
STG.exe, how come any program can measure my interface but not mrtg, do
I have to measure it with :::::2 ???


################# CFG FILE ######################

WorkDir: /www/htdocs
IconDir: /images

Target[622]: 21:public at 192.168.2.1:::::2
MaxBytes[622]: 87750000
Options[622]: bits growright
#Unscaled[622]: dwym
WithPeak[622]: ymw
Directory[622]: 622
Title[622]: ATM OC12 5/1
PageTop[622]:

############### ERROR ###############################

aurora:/erdem/mrtg/cfg # /erdem/mrtg/bin/mrtg /erdem/mrtg/cfg/622.cfg

SNMP Error:
no response received
SNMPv2c_Session (remote host: "192.168.2.1" [192.168.2.1].161)
community: "public"
request ID: -827152226
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /erdem/mrtg/bin/../lib/mrtg2/SNMP_util.pm line 458
SNMPGET Problem for ifHCInOctets.21 ifHCOutOctets.21 sysUptime sysName
on public at 192.168.2.1:::::2
at /erdem/mrtg/bin/mrtg line 1620
WARNING: skipping because at least the query for ifHCInOctets.21 on
192.168.2.1 did not succeed
ERROR: Target[622][_IN_] ' $$target[0]{$mode} ' did not eval into
defined data
ERROR: Target[622][_OUT_] ' $$target[0]{$mode} ' did not eval into
defined data
WARNING: Skipping Update of 622, inlast is not defined
WARNING: Skipping Update of 622, outlast is not defined
aurora:/erdem/mrtg/cfg #



-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Koelstra, J. (Jan)
Sent: Tuesday, December 31, 2002 4:36 PM
To: Hakan M. Durgut; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Weird Graphs


Hakan,

To monitor 64 bit counters you need the following:
1. A snmp device that is capable of anwering SNMPv2 requests
2. The 64 bit rateup.exe
3. Tell snmp to use the SNMPv2 counters. To do so your target lines will
look like: Target[name]: @x.x.x.x:::::2

HTH,

Jan.



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi



---------------------------------
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi