[mrtg] cfgmaker output errors

[Lam, Ken]

Hi,

When I first run "cfgmaker" with the options below output looks OK and then
executed /usr/local/mrtg-2/bin/mrtg /homes/ken/mrtg/cfg/mrtg.cfg and got
some
errors below.  According to the instructions this was normal for the first
time.
Even I tried to run 2 or 3 times it's still show some errors.  Below are
some
errors...

Now that I have mrtg.cfg so how I am able to see the graph of this data that
I just
ran.  Do I need to do anything get be able to see the graph?

Any helps would be greatly appreciated.

Ken.


mrtg# cfgmaker --global 'WorkDir: /homes/ken/mrtg'  \
          --global 'Options[_]: bits,growright' \
          --output /homes/ken/mrtg/cfg/mrtg.cfg    \
          Cip^seDiTa at 192.168.64.30
--base: Get Device Info on Cip^seDiTa at 192.168.64.30:
--base: Vendor Id: cisco
--base: Populating confcache
--snpo: confcache Cip^seDiTa at 192.168.64.30: Name Fa0/0 --> 1
--snpo: confcache Cip^seDiTa at 192.168.64.30: Name Se0/0 --> 2
--snpo: confcache Cip^seDiTa at 192.168.64.30: Name Nu0 --> 3
--snpo: confcache Cip^seDiTa at 192.168.64.30: Name Se0/0.1 --> 4
--snpo: confcache Cip^seDiTa at 192.168.64.30: Descr FastEthernet0/0 --> 1
--snpo: confcache Cip^seDiTa at 192.168.64.30: Descr Serial0/0 --> 2
--snpo: confcache Cip^seDiTa at 192.168.64.30: Descr Null0 --> 3
--snpo: confcache Cip^seDiTa at 192.168.64.30: Descr Serial0/0.1 --> 4
--snpo: confcache Cip^seDiTa at 192.168.64.30: Type 6 --> 1
--snpo: confcache Cip^seDiTa at 192.168.64.30: Type 32 --> 2
--snpo: confcache Cip^seDiTa at 192.168.64.30: Type 1 --> 3
--snpo: confcache Cip^seDiTa at 192.168.64.30: Type 32 --> 4 (duplicate)
--snpo: confcache Cip^seDiTa at 192.168.64.30: Ip 172.24.8.254 --> 1
--snpo: confcache Cip^seDiTa at 192.168.64.30: Ip 192.168.64.30 --> 4
--snpo: confcache Cip^seDiTa at 192.168.64.30: Eth 00-05-32-16-3d-80 --> 1
--snpo: confcache Cip^seDiTa at 192.168.64.30: Eth  --> 2
--snpo: confcache Cip^seDiTa at 192.168.64.30: Eth  --> 3 (duplicate)
--snpo: confcache Cip^seDiTa at 192.168.64.30: Eth  --> 4 (duplicate)
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifSpeed
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
--base: Walking ifAlias
--base: Writing /homes/ken/mrtg/cfg/mrtg.cfg
mrtg#

mrtg# pwd
/homes/ken/mrtg-2.9.24/cfg
mrtg# mrtg mrtg.cfg
Rateup WARNING: /usr/local/mrtg-2/bin/rateup could not read the primary log
file
 for 192.168.64.30_1
Rateup WARNING: /usr/local/mrtg-2/bin/rateup The backup log file for
192.168.64.
30_1 was invalid as well
Rateup WARNING: /usr/local/mrtg-2/bin/rateup Can't remove
192.168.64.30_1.old up
dating log file
Rateup WARNING: /usr/local/mrtg-2/bin/rateup Can't rename
192.168.64.30_1.log to
 192.168.64.30_1.old updating log file
gd-png:  fatal libpng error: Application must be recompiled; version 1.0.6
was i
ncompatible
ERROR: Skipping webupdates because rateup did not return anything sensible
Argument "UNIX" isn't numeric in ne at /usr/local/mrtg-2/bin/mrtg line 395.
Argument "UNIX" isn't numeric in ne at /usr/local/mrtg-2/bin/mrtg line 395.
WARNING: rateup died from Signal 11
 with Exit Value 0 when doing router '192.168.64.30_1'
 Signal was 11, Returncode was 0
Rateup WARNING: /usr/local/mrtg-2/bin/rateup could not read the primary log
file
 for 192.168.64.30_2
Rateup WARNING: /usr/local/mrtg-2/bin/rateup The backup log file for
192.168.64.
30_2 was invalid as well
Rateup WARNING: /usr/local/mrtg-2/bin/rateup Can't remove
192.168.64.30_2.old up
dating log file
Rateup WARNING: /usr/local/mrtg-2/bin/rateup Can't rename
192.168.64.30_2.log to
 192.168.64.30_2.old updating log file
gd-png:  fatal libpng error: Application must be recompiled; version 1.0.6
was i
ncompatible
ERROR: Skipping webupdates because rateup did not return anything sensible
Argument "UNIX" isn't numeric in ne at /usr/local/mrtg-2/bin/mrtg line 395.
WARNING: rateup died from Signal 11
 with Exit Value 0 when doing router '192.168.64.30_2'
 Signal was 11, Returncode was 0
Rateup WARNING: /usr/local/mrtg-2/bin/rateup could not read the primary log
file
 for 192.168.64.30_4
Rateup WARNING: /usr/local/mrtg-2/bin/rateup The backup log file for
192.168.64.
30_4 was invalid as well
Rateup WARNING: /usr/local/mrtg-2/bin/rateup Can't remove
192.168.64.30_4.old up
dating log file
Rateup WARNING: /usr/local/mrtg-2/bin/rateup Can't rename
192.168.64.30_4.log to
 192.168.64.30_4.old updating log file
gd-png:  fatal libpng error: Application must be recompiled; version 1.0.6
was i
ncompatible
ERROR: Skipping webupdates because rateup did not return anything sensible
Argument "UNIX" isn't numeric in ne at /usr/local/mrtg-2/bin/mrtg line 395.
WARNING: rateup died from Signal 11
 with Exit Value 0 when doing router '192.168.64.30_4'
 Signal was 11, Returncode was 0
mrtg#


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi