[mrtg] Re: Monitoring Cisco H.323 VOIP gateways

Jerry Heidtke jheidtke at fmlh.edu
Wed Jan 22 20:08:05 MET 2003


Does the device support the ciscoPopMgmtMIB? I'm using mrtg to track a few
variables in this on a 5350, such as cpmActiveDS0s (The number of DS0s that
are currently in use.) .1.3.6.1.4.1.9.10.19.1.1.4.0

There are other interesting OIDs in this mib.

Jerry

-----Original Message-----
From: Grabowski, David [mailto:david.grabowski at us.mizuho-sc.com] 
Sent: Wednesday, January 22, 2003 12:46 PM
To: Robert Holley; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Monitoring Cisco H.323 VOIP gateways



Thanks for the info, Bob. This is *close* to what I want.

Since they're counters, I can use this to watch the total number of calls
per polling interval (in my case, 5 minutes). And although that's not what I
was looking for, I'm going to graph it anyway, because the total number of
inbound & outbound calls is pretty interesting as well.

However, what I'm trying to do is track the utilization of my PRI's. In
other words, what percentage of B channels are in use at particular times of
day? Obviously, I'll only have samples at the polling intervals, but at
least it'll give me something to go with.

-Dave

-----Original Message-----
From: Robert Holley [mailto:rholley at cisco.com]
Sent: Wednesday, January 22, 2003 12:33 PM
To: Grabowski, David; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Monitoring Cisco H.323 VOIP gateways


David,

Correct me if I'm wrong, but it appears that you are looking for the number
of calls connected at one polling interval (e.g "....poll with MRTG so I end
up
 with the number of channels that list a "4" for their status?");

You could try looking at this table.

"isdnSigStatsInCalls"		"1.3.6.1.2.1.10.20.1.3.3.1.1"
"isdnSigStatsInConnected"	"1.3.6.1.2.1.10.20.1.3.3.1.2"
"isdnSigStatsOutCalls"		"1.3.6.1.2.1.10.20.1.3.3.1.3"
"isdnSigStatsOutConnected"	"1.3.6.1.2.1.10.20.1.3.3.1.4"


IsdnSignalingStatsEntry ::= SEQUENCE {
            isdnSigStatsInCalls         Counter32,
            isdnSigStatsInConnected     Counter32,
            isdnSigStatsOutCalls        Counter32,
            isdnSigStatsOutConnected    Counter32,
            isdnSigStatsChargedUnits    Counter32
        }

isdnSigStatsInCalls OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of incoming calls on this interface."
        ::= { isdnSignalingStatsEntry 1 }

isdnSigStatsInConnected OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of incoming calls on this interface
             which were actually connected."
        ::= { isdnSignalingStatsEntry 2 }

isdnSigStatsOutCalls OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of outgoing calls on this interface."
        ::= { isdnSignalingStatsEntry 3 }

isdnSigStatsOutConnected OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of outgoing calls on this interface
             which were actually connected."
        ::= { isdnSignalingStatsEntry 4 }

regards
Bob

> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
> Behalf Of Grabowski, David
> Sent: Wednesday, January 22, 2003 11:01 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Monitoring Cisco H.323 VOIP gateways
>
>
> Using MRTG 2.9.25 on Windows2000 to monitor tons and tons of
> stuff1. Love it.
>
> We've got a couple Cisco 26xx series routers acting as H.323
> voice-over-IP gateways with PRI connections to the PSTN.
>
> I've been exhaustively searching for an OID that will simply give
> me the number of active channels on the PRI. Three cases with
> Cisco TAC later, and I've come up with nothing.
>
> However, I did discover that I can look at the individual B
> channel and determine its status in .1.3.6.1.2.1.10.20.1.2.1.1.2.X
>
> Where 'X' is a particular B channel on the PRI. (For reasons I
> haven't bothered to figure out yet, 'X' is in the range of 30-52)
>
> For each entry, I get an integer that is:
>
> 1 - idle
> 2 - connecting
> 3 - connected
> 4 - active
>
> So, the long and the short of it is -- for all 23 channels, can
> someone help me figure out what to poll with MRTG so I end up
> with the number of channels that list a "4" for their status?
>
> TIA
>
> ---------------------------------------------------
> David Grabowski
> Mizuho Securities USA
> 212-209-9349 (New!)
>
>
> ##################################################################
> ###################
> CONFIDENTIAL: This e-mail, including its contents and
> attachments, if any, are confidential. It is neither an offer to
> buy or sell, nor a solicitation of an offer to buy or sell, any
> securities or any related financial instruments mentioned in it.
> If you are not the named recipient please notify the sender and
> immediately delete it. You may not disseminate, distribute, or
> forward this e-mail message or disclose its contents to anybody
> else. Unless otherwise indicated, copyright and any other
> intellectual property rights in its contents are the sole
> property of Mizuho Securities USA Inc.
>      E-mail transmission cannot be guaranteed to be secure or
> error-free. The sender therefore does not accept liability for
> any errors or omissions in the contents of this message which
> arise as a result of e-mail transmission.  If verification is
> required please request a hard-copy version.
>      Although we routinely screen for viruses, addressees should
> check this e-mail and any attachments for viruses. We make no
> representation or warranty as to the absence of viruses in this
> e-mail or any attachments. Please note that to ensure regulatory
> compliance and for the protection of our customers and business,
> we may monitor and read e-mails sent to and from our server(s).
> ##################################################################
> ###################
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

############################################################################
#########
CONFIDENTIAL: This e-mail, including its contents and attachments, if any,
are confidential. It is neither an offer to buy or sell, nor a solicitation
of an offer to buy or sell, any securities or any related financial
instruments mentioned in it. If you are not the named recipient please
notify the sender and immediately delete it. You may not disseminate,
distribute, or forward this e-mail message or disclose its contents to
anybody else. Unless otherwise indicated, copyright and any other
intellectual property rights in its contents are the sole property of Mizuho
Securities USA Inc.
     E-mail transmission cannot be guaranteed to be secure or error-free.
The sender therefore does not accept liability for any errors or omissions
in the contents of this message which arise as a result of e-mail
transmission.  If verification is required please request a hard-copy
version.
     Although we routinely screen for viruses, addressees should check this
e-mail and any attachments for viruses. We make no representation or
warranty as to the absence of viruses in this e-mail or any attachments.
Please note that to ensure regulatory compliance and for the protection of
our customers and business, we may monitor and read e-mails sent to and from
our server(s).
############################################################################
#########

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


Confidentiality Notice: This e-mail message, including any attachments, is 
for the sole use of the intended recipient(s) and may contain confidential 
and privileged information.  Any unauthorized review, use, disclosure or 
distribution is prohibited.  If you are not the intended recipient, please 
contact the sender by reply e-mail and destroy all copies of the original 
message.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list