[mrtg] Re: Bandwidth Monitoring

[SHOLAAS Margaret G]

Oops never mind about the max speed suggestion, I think that's only relevant
to percentage calculations, not absolute measurements such as the problem
you're having.

-----Original Message-----
From: SHOLAAS Margaret G 
Sent: Thursday, January 30, 2003 9:09 AM
To: mrtg at list.ee.ethz.ch; 'Paul Polichronakis'
Subject: [mrtg] Re: Bandwidth Monitoring


I'm guessing the pipe is 6 mega BITS per second, and your graph is in BYTES
per second, so that may be part of the problem. But your graph shows a peak
of around 36K bytes, which, if we multiply by 8 bits/byte works out to about
.3 mega bits, so that's still off by a factor of 10. Does the max speed on
the page show correctly (i.e. "6.0 Mbits/s")? I believe that's used in the
calculations for the graph.

Margaret

Margaret Sholaas, Senior System Network Analyst
Regional Information System
125 E. 8th Ave.
Eugene, OR 97401

EMAIL Margaret.G.SHOLAAS at RIS.Lane.OR.US
VOICE (541) 682-4565
FAX (541) 682-2345

-----Original Message-----
From: Paul Polichronakis [mailto:paul at outsourcemail.com] 

<snip>

I cannot seem to figure out why the machine is reporting such low
results (I have attached a link to a copy of one graph). This graph is
the interface of a 6 meg pipe that I know atleast 3 meg are being used
constantly.

<snip>

http://www.polynetworks.com/64.200.229.134_7-day.png

<snip>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi