[mrtg] Re: mrtg MLT or etherchannel

[Michael Earls]

So if I understand this correctly, my cfg file should look like this.
 
I have 4 links that are SMLT its like MLT or Etherchannel, It does not
have an extra interface like you explained.
This is a Nortel Network Passport 8600 
 
Target[smlt-cr01]: \1000GbicSx\ Port\ 1/1:public at device +
2/1:public at device + 3/8:publice at device + 4/8 :public at device
SetEnv[smlt-cr01]: MRTG_INT_IP="" MRTG_INT_DESCR="1000GbicSx Port 1/1"
Directory[smlt-cr01]: smlt-cr01
MaxBytes[smlt-cr01]: 500000000
Title[smlt-cr01]: Traffic Analysis for 1000GbicSx Port 1/1 -- SMLT
PageTop[smlt-cr01]: <H1>Traffic Analysis for 1000GbicSx Port 1/1 --
SMLT</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>mlt-cr01</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>networkphysical</TD></TR>
   <TR><TD>Description:</TD><TD>1000GbicSx Port 1/1  </TD></TR>     
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>       
   <TR><TD>ifName:</TD>     <TD>SMLT</TD></TR>       
   <TR><TD>Max Speed:</TD>  <TD>125.0 MBytes/s</TD></TR>    
 </TABLE>

What are your thoughts, 
 
Thanks, again
Michael

 
 
PGP Info: KeyID 0x5EB59708 Fingerprint 108B A1D8 76F5 08A8 501A F28C
86F4 4BC5 5EB5 9708 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi