[mrtg] Re: Cisco2600 E1/T1 ISDN PRI - Active DS0

[Michael Markstaller]

Hi,

I'm looking on a 3640 but the OID's should be the same, also with modem-usage:

#----------------------------------------------------------------------------------------------
# purpose: DS0s and PPP Sessions.
#----------------------------------------------------------------------------------------------
Target[HOSTNAME_DS0PPP]: 1.3.6.1.4.1.9.10.19.1.1.4.0&1.3.6.1.4.1.9.10.19.1.1.5.0:community at HOSTNAME
MaxBytes1[HOSTNAME_DS0PPP]: 40
MaxBytes2[HOSTNAME_DS0PPP]: 40
Title[HOSTNAME_DS0PPP]: DS0s and PPP sessions in Use
PageTop[HOSTNAME_DS0PPP]: <H1>DS0s and PPP sessions in Use</H1>
Options[HOSTNAME_DS0PPP]: gauge

#----------------------------------------------------------------------------------------------
# purpose: DS0s and SerialX:Y
#----------------------------------------------------------------------------------------------
Target[HOSTNAME_DS0SERIAL]: 1.3.6.1.4.1.9.10.19.1.1.4.0&1.3.6.1.4.1.9.10.19.1.1.3.0:community at HOSTNAME
MaxBytes1[HOSTNAME_DS0SERIAL]: 40
MaxBytes2[HOSTNAME_DS0SERIAL]: 40
Title[HOSTNAME_DS0SERIAL]: DS0s and SerialX:Y in Use
PageTop[HOSTNAME_DS0SERIAL]: <H1>DS0s and SerialX:Y in Use</H1>
Options[HOSTNAME_DS0SERIAL]: gauge

#----------------------------------------------------------------------------------------------
# purpose: cmSystemModemsInUse and cmSystemModemsAvailable
#----------------------------------------------------------------------------------------------
Target[HOSTNAME_modemcount]: 1.3.6.1.4.1.9.9.47.1.1.6.0&1.3.6.1.4.1.9.9.47.1.1.7.0:community at HOSTNAME
MaxBytes1[HOSTNAME_modemcount]: 8
MaxBytes2[HOSTNAME_modemcount]: 8
Title[HOSTNAME_modemcount]: cmSystemModemsInUse and cmSystemModemsAvailable
PageTop[HOSTNAME_modemcount]: <H1>cmSystemModemsInUse and cmSystemModemsAvailable</H1>
Options[HOSTNAME_modemcount]: gauge  


Michael

-----Original Message-----
From: Stephen [mailto:hyss119 at yahoo.com.sg]
Sent: Tuesday, March 25, 2003 11:05 AM
To: 'MRTG users'
Subject: [mrtg] Cisco2600 E1/T1 ISDN PRI - Active DS0


Hi,

Does anyone has the OID for Cisco2600 Active DS0 for ISDN Pri channels? 

I tried using active DS0 from AS5300 but it doesn't work.
Target[active_ds0s]:
1.3.6.1.4.1.9.10.19.1.1.4.0&1.3.6.1.4.1.9.10.19.1.1.4.0:private at 192.168.
0.1

Can someone enlighten me. :-)

Thanks in advance.

Rgds
Stephen

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi