[mrtg] Re: MRTG and Cisco 3640

[fluhmann at vvm.com]

When you run cfgmaker, try adding the --global "options[_]: bits"  option.
193K is 193KBytes.  Multiply that by 8bits and you get 1.544Kbits (T-1)

-------- Original Message --------
Subject: [mrtg] MRTG and Cisco 3640
From: "Scott Miller" <srmiller at interbel.net>
Date: Tue, March 25, 2003 4:25 pm
To: <mrtg at list.ee.ethz.ch>

> I have MRTG installed on my up2date RedHat 7.2 box - but the graphs seem
> to be coming out wrong.  I've ran the configmaker, and it found my
> router and all the ports, but reports that my two serial (T-1) ports are
> only running at 193K each.  They should be a full 1.545MB each.  Is this
> something that needs to be re-configured within MRTG, or something I
> need to look at on my router?
>
> Thanks
> Scott Miller
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi