[mrtg] Re: MRTG and Cisco 3640

[mnealon at conversent.com]

  Sounds like you are looking at Bytes per second instead of bits per
second.  If you want to use configmaker add this to the command line: 

--global 'Options[_]: bits'

  Or just edit the conf, add "bits" to the options, global or per instance.

-Mike



-----Original Message-----
From: Scott Miller [mailto:srmiller at interbel.net]
Sent: Tuesday, March 25, 2003 5:26 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] MRTG and Cisco 3640


I have MRTG installed on my up2date RedHat 7.2 box - but the graphs seem to
be coming out wrong.  I've ran the configmaker, and it found my router and
all the ports, but reports that my two serial (T-1) ports are only running
at 193K each.  They should be a full 1.545MB each.  Is this something that
needs to be re-configured within MRTG, or something I need to look at on my
router?

Thanks
Scott Miller

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi