[mrtg] Re: Traffic Usage Calculations

[Degore, L R, SOLCM]

Eric

Here is a piece of it. It covers the first interface on the router.

# /usr/local/mrtg-2/bin/cfgmaker --ifref=name --global 'WorkDir: /data1/httpd/mr
tg/traffic/wan' --global 'Options[_]: bits' --community=xxxx --if-template /usr/
local/mrtg-2/templates/rich-traffic-test --global 'ThreshDir: /data2/mrtg/alerts
' --output /usr/local/mrtg-2/configs/rich-traffic-test PDAZKCC001


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
PathAdd:/usr/local/rrdtool-1.0.37/bin
LibAdd:/usr/local/rrdtool-1.0.37/lib/perl
LogFormat:rrdtool
RunAsDaemon:Yes
Forks:15

WorkDir: /data1/httpd/mrtg/traffic/wan
Options[_]: bits
ThreshDir: /data2/mrtg/alerts

######################################################################
# System: PDAZKCC001
# Description: Cisco Internetwork Operating System Software
#          IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)XE1, EARLY DEPLOYME
NT RELEASE SOFTWARE (fc1)
#          TAC:Home:SW:IOS:Specials for info
#          Copyright (c) 1986-1999 by cisco Systems, Inc.
#          Compiled Sun 19-Sep-99 06:45
# Contact:
# Location
######################################################################



### Interface 2 >> Descr: 'Ethernet0/1' | Name: 'Et0/1' | Ip: '135.150.142.192'
| Eth: '00-30-f2-2a-c8-01' ###
#---------------------------------------------------------------------
Target[PDAZKCC001_Et0_1]: 1.3.6.1.2.1.2.2.1.10.2&1.3.6.1.2.1.2.2.1.16.2:gnoc at PDA
ZKCC001:
SetEnv[PDAZKCC001_Et0_1]: MRTG_INT_IP="135.150.142.192" MRTG_INT_DESCR="Ethernet
0/1"
Directory[PDAZKCC001_Et0_1]: PDAZKCC001
MaxBytes[PDAZKCC001_Et0_1]: 10000000
Suppress[PDAZKCC001_Et0_1]: mwy
Title[PDAZKCC001_Et0_1]: Traffic Analysis for Et0/1 - PDAZKCC001
PageTop[PDAZKCC001_Et0_1]: <H1>Traffic Analysis for Et0/1 -- PDAZKCC001</H1>
 <TABLE>
   <TR><TD>SysName:</TD>    <TD>PDAZKCC001</TD></TR>
   <TR><TD>SysLoc:</TD>     <TD>;</TD></TR>
   <TR><TD>SysContact:</TD> <TD>;</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>10.0 Mbits/s</TD></TR>
 </TABLE>
# The following information allows you to perform some task(s)
# whenever a minimum of maximum threshold has been breached
# In order to activate this features, simply remove the # from the
# lines below.
#
#ThreshMinI[PDAZKCC001_Et0_1]:
ThreshMaxI[PDAZKCC001_Et0_1]: 40%
ThreshProgI[PDAZKCC001_Et0_1]: /usr/local/mrtg-2/scripts/alert.sh
ThreshProgOKI[PDAZKCC001_Et0_1]: /usr/local/mrtg-2/scripts/ok.sh
#
#ThreshMinO[PDAZKCC001_Et0_1]:
#ThreshMaxO[PDAZKCC001_Et0_1]:
#ThreshProgO[PDAZKCC001_Et0_1]: /usr/local/mrtg-2/scripts/mailalert.sh
#ThreshProgOKO[PDAZKCC001_Et0_1]: /usr/local/mrtg-2/scripts/mailok.sh

Rich DeGore
rdegore at att.com
407-805-6472


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi