[mrtg] Re: Disk Utilization For WinNT
wolfe at daticon.com
wolfe at daticon.com
Fri May 23 21:41:30 MEST 2003
Ok.
I was albe to see the OID for the drive in Getif. One question. When you run
a querry with Getif, does it get the info from the server or from the MIB
file that I put in the Getif subdirectory? Reason I say this is that the OID
does not seem to exist on the server, as seen from the MRTG error:
SNMP Error:
Received SNMP response with error code
error status: genErr
index 1 (OID: 1.3.6.1.4.1.311.1.1.3.1.1.5.1.4)
SNMPv1_Session (remote host: "xx.xx.xx.xx" [xx.xx.xx.xx].161)
community: "community"
request ID: 689389339
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 458
SNMPGET Problem for .1.3.6.1.4.1.311.1.1.3.1.1.5.1.4
1.3.6.1.4.1.311.1.1.3.1.1.5.1.3 sysUptime sysName on community at xx.xx.xx.xx
at ./mrtg line 1620
WARNING: skipping because at least the query for
.1.3.6.1.4.1.311.1.1.3.1.1.5.1.4 on xx.xx.xx.xx did not succeed
ERROR: Target[ciscoworks-microsoft_winnt_hdd][_IN_] ' $$target[0]{$mode} '
did not eval into defined data
ERROR: Target[ciscoworks-microsoft_winnt_hdd][_OUT_] ' $$target[0]{$mode} '
did not eval into defined data
WARNING: Skipping Update of ciscoworks-microsoft_winnt_hdd, inlast is not
defined
WARNING: Skipping Update of ciscoworks-microsoft_winnt_hdd, outlast is not
defined
The OID if from the Getif program.
Thanks,
Austin Wolfe
-----Original Message-----
From: Brander, Eric [mailto:Eric.Brander at ACS-INC.com]
Sent: Friday, May 23, 2003 2:30 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Disk Utilization For WinNT
~snip~
Good suggestions here, but I'd also like to add that when I tried using
SNMP4TC on an NT4 box, I had to re-install SNMP and immediately re-install
SP6A. FWIW, it worked for me once I completed those steps.
Eric Brander
ACS
Texas CHIP Account
Sr. Communications Engineer - Information Systems Department
512.336.3331
Eric dot Brander at acs-inc dot com
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list