[mrtg] Re: question about MIB/tempTrax

[Alex Zheng]

where do you specify noMib2 option?

when I do:

cfgmaker green at 10.10.1.6                 (10.10.1.6 is tempTrax sensor' ip 
address)


I got following error:

# ./cfgmaker green at 10.10.1.6
--base: Get Device Info on green at 10.10.1.6:
SNMP Error:
Received SNMP response with error code
   error status: noSuchName
   index 1 (OID: 1.3.6.1.2.1.1.1.0)
SNMPv1_Session (remote host: "10.10.1.6" [10.10.1.6].161)
                   community: "green"
                  request ID: 1809657765
                 PDU bufsize: 8000 bytes
                     timeout: 2s
                     retries: 5
                     backoff: 1)
  at /export/home/mrtg/bin/../lib/mrtg2/SNMP_util.pm line 458
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on 
green at 10.10.1.6:
  at ./cfgmaker line 673
--base: Vendor Id:
--base: Populating confcache
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifSpeed
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
# Created by
# ./cfgmaker green at 10.10.1.6


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits


######################################################################
# System:
# Description:
# Contact:
# Location:
######################################################################


At 04:49 AM 11/3/2003, you wrote:
>mrtg does not need to see the MIB file - you will have problems monitoring 
>the temperature with the TempTrax using MRTG unless you specify the NoMib2 
>option in your config - the TempTrax does not support the MIBII system MIB
>
>-----Original Message-----
>From: Alex Zheng [mailto:azheng at monterey.k12.ca.us]
>Sent: Friday, October 31, 2003 3:36 PM
>To: mrtg at list.ee.ethz.ch
>Subject: [mrtg] question about MIB/tempTrax
>
>
>
> >
> >
> >
> >
> >
> >We had purchased a temperature monitor - TempTrax Model E. The vendor has
> >a MIB file, but for MRTG to monitor the output of device(i.e., temperature
> >output) , where should I place the mib file so that mrtg will see? and how
> >should I generate the cfg file using cfgmaker?
> >
> >
> >
> >
> >thanks.
> >
> >alex
>
>--
>Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
>Archive     http://www.ee.ethz.ch/~slist/mrtg
>FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
>WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>
>
>Learn more about Paymentech's payment processing services at 
>www.paymentech.com
>THIS MESSAGE IS CONFIDENTIAL.  This e-mail message and any attachments are 
>proprietary and confidential information intended only for the use of the 
>recipient(s) named above.  If you are not the intended recipient, you may 
>not print, distribute, or copy this message or any attachments.  If you 
>have received this communication in error, please notify the sender by 
>return e-mail and delete this message and any attachments from your computer.
>
>--
>Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
>Archive     http://www.ee.ethz.ch/~slist/mrtg
>FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
>WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi