[mrtg] doesn't show traffice on interface 1

[SWIT]

 I have 3 Breezecom DS-11 units.
 When I graph the info I show no data on the wireless port.

 see here:

http://spiderman.wirelesscommunitynetworks.com/cgi-bin/mrtg_rrd/mrtg-rrd-bh.cgi/


 I used cfgmaker to get the info.
 # Created by
 # ./cfgmaker --global 'Workdir: /home/htdocs/mrtg' --global 'Options[_]:
 bits,growright' --output /temp/mrtg/backhauls.cfg public at 192.168.168.177
 public at 192.168.168.191 public at 192.168.168.174
 ### Global Defaults
 LogFormat: rrdtool
 PathAdd: /usr/local/rrdtool/bin
 LibAdd: /usr/local/rrdtool/lib/perl
 EnableIPv6: no
 Workdir: /home/htdocs/mrtg/backhauls
 Options[_]: bits,growright
 LoadMIBs: /usr/local/mrtg-2/bin/ds11integ.mib
 Forks: 4

 This is the page defaults.
 ### Interface 1 >> Descr: 'wireless' | Name: '' | Ip: '' | Eth: '' ###

> Target[192.168.168.191_1]: 1:public at 192.168.168.191:
> SetEnv[192.168.168.191_1]: MRTG_INT_IP="" MRTG_INT_DESCR="wireless"
> MaxBytes[192.168.168.191_1]: 1375000
> Title[192.168.168.191_1]: Traffic Analysis for Hernando Beach RB
> PageTop[192.168.168.191_1]: <H1>Wireless Traffic Analysis </H1>
>  <TABLE>
>    <TR><TD>System:</TD>     <TD>Breezecom RB-11DS</TD></TR>
>    <TR><TD>Maintainer:</TD> <TD>Mark DeWar</TD></TR>
>    <TR><TD>Description:</TD><TD>wireless </TD></TR>
>    <TR><TD>ifType:</TD>     <TD>Other (1)</TD></TR>
>    <TR><TD>ifName:</TD>     <TD></TD></TR>
>    <TR><TD>Max Speed:</TD>  <TD>11.0 Mbits/s</TD></TR>
>  </TABLE>
>
>
> I am not sure why I can't get any data graphed for port1 ?
>
> port 2 does graph tho
> :
>
> Target[192.168.168.191_2]: 2:public at 192.168.168.191:
> SetEnv[192.168.168.191_2]: MRTG_INT_IP="" MRTG_INT_DESCR="ethernet"
> MaxBytes[192.168.168.191_2]: 1250000
> Title[192.168.168.191_2]: Traffic Analysis for Hernando Beach RB
> PageTop[192.168.168.191_2]: <H1>Ethernet Traffic Analysis </H1>
>  <TABLE>
>    <TR><TD>System:</TD>     <TD>Brezcom RB-11DS</TD></TR>
>    <TR><TD>Maintainer:</TD> <TD>Mark DeWar</TD></TR>
>    <TR><TD>Description:</TD><TD>ethernet  </TD></TR>
>    <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
>    <TR><TD>ifName:</TD>     <TD></TD></TR>
>    <TR><TD>Max Speed:</TD>  <TD>10.0 Mbits/s</TD></TR>
>  </TABLE>
>
>
> only difference I see is for iftype. port 1 says other.
> I tried changing to ethernetCsmacd but that did not seem to work either.
>
> any help appreciated.
>


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi