[mrtg] scaling the graphs - the curve is at the very buttom of the graph

Leonard Krivopaltsev leonard at zinio.com
Wed Oct 1 19:44:43 MEST 2003


Hi everybody

I am measuring IO writes. I set my max to 40M (41943040), which maximum throughput.
On the vertical scale, MRTG draw the scale up to 24M, but my actual curve max is ~500K/sec - so the graph sits at the buttom. Why mrtg did not scale it correctly? My max peak for that value has been 1M/sec.

How can i force it to rescale to something more meaningful?
thank you

here is my config

Target[10.10.5.23_DISK_IO_WRITE]:  .1.3.6.1.4.1.311.1.1.3.1.1.4.1.18.0&.1.3.6.1.4.1.311.1.1.3.1.1.4.1.18.0:public at 10.10.5.23:::::2
Options[10.10.5.23_DISK_IO_WRITE]: integer,unknaszero,nopercent,gauge,noo
MaxBytes[10.10.5.23_DISK_IO_WRITE]: 41943040
Title[10.10.5.23_DISK_IO_WRITE]: eq-w2k-db-0-prod-PRIMARY
YLegend[10.10.5.23_DISK_IO_WRITE]: % Bytes/sec
ShortLegend[10.10.5.23_DISK_IO_WRITE]: %
PageTop[10.10.5.23_DISK_IO_WRITE]: <H1>DISK I/O WRITE (10.10.5.23)</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>10.10.5.23</TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD> Max rate is 320M/sec </TD></TR>
   <TR><TD>ifType:</TD>     <TD>DISK IO WRITE</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.5.23</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list