[mrtg] Re: Y axis values from 0.0 to 0.0 ?!?!?

[Koelstra, J. (Jan)]

Alec,

I realize my answer was not the answer to your question, and it wasn't
complete either. I meant to say: MRTG uses only whole numbers in the
graph.
Your logfile contains whole numbers so the graph _should_ be OK. I do
not know why the are not always displayed in your graph.
I'm curious to know what the first lines of the logfile look at the
moment the graph is wrong.

Jan.

-----Original Message-----
From: Alec Waters [mailto:alec.waters at dataline.co.uk] 
Sent: Thursday, October 30, 2003 1:33 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Y axis values from 0.0 to 0.0 ?!?!?


Hi Jan,

Thanks for your reply!

> Do you realize MRTG shows only whole numbers?
> By using "Factor[xxx]: 0.01" a value of 99 is changed to 0.99 which is
> rounded down to 0

Factor[xxx]: 0.01 seems to work all the time, regardless of value. 
Here's what's displayed under my daily graph - note the <1.0 value for 
Average Speed:

Max Speed 1.7 m/s Average Speed 0.6 m/s	Current Speed 1.0 m/s
Max Gust  4.7 m/s Average Gust  1.9 m/s Current Gust  2.5 m/s

YTicsFactor[xxx]: 0.01 is my problem, and seems to work _most_ of the 
time. My .log file only contains the cm/s values:

1067516658 133 270
1067516658 133 270 133 270
1067516358 130 280 130 280
1067516100 168 288 216 290
1067515800 162 329 163 350
1067515500 123 304 162 350

...I just want to display (value/100) on the graph. Am I really trying 
to do the impossible?

thanks a lot,
alec
-- 
Alec Waters
Dataline Software Ltd
Clarence House, 30-31 North Street, Brighton, BN1 1EB, UK

Tel: +44 (0)1273 324939
Fax: +44 (0)1273 205576
www: http://www.dataline.co.uk
IPv6: http://www.ipv6.dataline.co.uk


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. 
Aan dit bericht kunnen geen rechten worden ontleend. 

Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van het bericht te vernietigen. 
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt. 
This message shall not constitute any obligations.

This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and delete its content.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi