[mrtg] Re: 3550 CPU and etherchannel

Greg.Volk at edwardjones.com Greg.Volk at edwardjones.com
Thu Sep 4 22:37:59 MEST 2003


Trying using the following templates with cfgmaker for Cisco
3550-XL CPU, IO-MEM, and Total-bandwidth-used metrics.

http://mrtg.gvolk.com/template/host-ios.template
http://mrtg.gvolk.com/template/host-xl-bandwidth.template

I've poll tested the above templates against several
C3550-XL switches running various IOS versions and they
work fine.

I don't know of a way to get etherchannel stats out of these
switches other than summing the OIDs of multiple ports.



}-----Original Message-----
}From: jheidtke [mailto:jheidtke at fmlh.edu]
}Sent: Thursday, September 04, 2003 3:29 PM
}To: pam43; mrtg
}Cc: jheidtke
}Subject: [mrtg] Re: 3550 CPU and etherchannel
}
}
}
}Here's some OIDs I use on our 3550's. They all work. If they don't work
}for you, it's a device configuration or security issue.
}
}Target[CiscocpmCPUTotal1m5m]:
}.1.3.6.1.4.1.9.9.109.1.1.1.1.4.1&.1.3.6.1.4.1.9.9.109.1.1.1.1.5.1:
}Target[ProcessorMem]:
}.1.3.6.1.4.1.9.9.48.1.1.1.6.1&.1.3.6.1.4.1.9.9.48.1.1.1.5.1:
}Target[IOMem]:
}.1.3.6.1.4.1.9.9.48.1.1.1.6.2&.1.3.6.1.4.1.9.9.48.1.1.1.5.2:
}
}Jerry
}
}-----Original Message-----
}From: Patricia A. Malinowski [mailto:pam43 at georgetown.edu] 
}Sent: Thursday, September 04, 2003 3:16 PM
}To: mrtg at list.ee.ethz.ch
}Subject: [mrtg] 3550 CPU and etherchannel
}
}
}Hello all,
}I have searched through the MRTG archive(s) to determine which OID/MIB
}to use for monitoring the CPU on each 3550 and the traffic on our
}etherchannel between two Cisco 3550's.  I've found varying OID's being
}used.  Therefore, I'm asking if someone can shed some light on this
}subject.
}
}I've found the following OID's being used for CPU monitoring:
}
}1.3.6.1.4.1.9.9.109.1.1.1.1.4.1&1.3.6.1.4.1.9.9.109.1.1.1.1.5.1
}If I do a snmpget on the above, I receive nothing.
}
}1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.58.0
}
}
}1.3.6.1.4.1.9.9.48.1.1.1.6.1&1.3.6.1.4.1.9.9.48.1.1.1.7.1(for memory
}monitoring)
}
}I cannot locate the OID for the etherchannel monitoring, but I'm still
}searching.  
}If anyone can help, I'd appreciate it!
}
}Thanks.
}
}-Patricia
}
}
}
}--
}Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
}Archive     http://www.ee.ethz.ch/~slist/mrtg
}FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
}WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
}
}
}Confidentiality Notice: This e-mail message, including any attachments,
}is for the sole use of the intended recipient(s) and may contain
}confidential and privileged information.  Any unauthorized review, use,
}disclosure or distribution is prohibited.  If you are not the intended
}recipient, please contact the sender by reply e-mail and destroy all
}copies of the original message.
}
}--
}Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
}Archive     http://www.ee.ethz.ch/~slist/mrtg
}FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
}WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
}
}


-- Attached file removed by Ecartis and put at URL below --
-- Type: application/ms-tnef
-- Size: 1k (1940 bytes)
-- URL : http://www.ee.ethz.ch/~slist/p/62-WINMAIL.DAT


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list