[mrtg] Re: mrtg showing very high cpu usage cause of otherapprunning

[Luis]

I've been reading your question and I have a similar problem to you.
¿Where can I find information about running MRTG as daemon?

Thanks in advance...

-----Mensaje original-----
De: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] En
nombre de Ross Tsolakidis
Enviado el: viernes, 05 de septiembre de 2003 6:00
Para: mrtg at list.ee.ethz.ch
Asunto: [mrtg] Re: mrtg showing very high cpu usage cause of
otherapprunning


Awesome, thx very much james !


Regards,

-- 
Ross.



-----Original Message-----
From: james [mailto:hackerwacker at cybermesa.com] 
Sent: Friday, 5 September 2003 1:38 PM
To: Ross Tsolakidis
Cc: mrtg at list.ee.ethz.ch
Subject: Re: [mrtg] Re: mrtg showing very high cpu usage cause of
otherapprunning


Forgot to mention the advantage of running as a daemon;
1) Saves the load of starting the app every 5 mins
2) loading and reading the config every 5 mins
3) Allows MRTG to fork for faster data acquisition



==============================
This email is from PowerServe Australia Pty Limited (A.C.N. 102 661 441)
The information contained in this email (including any attached files)
may be privileged and confidential intended for the use of the
person/persons named above. If you are not the intended recipient, you
are advised that any use, distribution or copying of the information is
strictly prohibited. If you have received this transmission in error,
please notify PowerServe Australia Pty Limited immediately on 1300 790
792 or reply by email to the sender.

PowerServe Australia Pty Limited does not represent or warrant that this
email or any attached files are free from computer viruses or other
defects. Any attached files are provided, and may only be used, on the
basis that the user assumes all responsibility for any loss, damage or
consequence resulting directly or indirectly from use of the attached
files. In any event, the liability of PowerServe Australia Pty Limited
is limited to either the resupply of the attached files or the cost of
having the attached files resupplied. ==============================

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi