[mrtg] Re: Graphics doesn't display real usage

[PAUL WILLIAMSON]

Are you using bits or bytes?

That is most likely where the confusion lies - it usually does.

Paul

>>> "Eduardo Sanchez" <esanchez at numar.net> 09/12/03 03:39PM >>>
Hi everybody...
I just installed mrtg today, and configured it to monitor my router.
Our bandwidth is more or less ~384Kbps, the graphics report a scale
until 400Kbps so everything is fine...
But for some reason the graphics usage only report 43 kbps for In
traffic and 35.9kbps for out traffic.
I think it is wrong, we must using more the leased line, here is my
config settings for the interface I'm trying to monitor:

Target[192.168.0.3_4]: 4:public at 192.168.0.3: 
SetEnv[192.168.0.3_4]: MRTG_INT_IP="192.168.0.3"
MRTG_INT_DESCR="Port_5,-Ethernet-/VANGUARD-320"
MaxBytes[192.168.0.3_4]: 46750
WithPeak[192.168.0.3_4]: wmy
AbsMax[192.168.0.3_4]: 46750
Unscaled[192.168.0.3_4]: dwmy
XSize[192.168.0.3_4]: 600
YSize[192.168.0.3_4]: 300
Title[192.168.0.3_4]: Traffic Analysis for 4 -- 

Is there something I'm missing in the configuration?
Regards,

  -eduardo s.m.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://www.ee.ethz.ch/~slist/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi