[mrtg] Re: one more graph problem...

[Duane Cox]

Paul

Thanks, but I'm using the gauge option, so I didn't think I would need to *
300 ...
Duane


----- Original Message ----- 
From: "PAUL WILLIAMSON" <pwilliamson at mandtbank.com>
To: <dcox at illicom.net>; <mrtg at list.ee.ethz.ch>
Sent: Monday, September 29, 2003 3:10 PM
Subject: [mrtg] Re: one more graph problem...


> You've included your problem in the post...very efficient.
>
> This is the same problem as your first one.  You've got less than
> 300 units change between one sample and the next.  Make it greater
> than 300 and you'll be set.
>
> Paul
>
> >>> "Duane Cox" <dcox at illicom.net> 09/29/03 03:08PM >>>
> I fixed my previous problem, but this on has me stumped.
> This is a calculation based on the 3 oids.  It's output is fine, but mrtg
is not grahing it.  The doc says that mrtg will graph the rouned result.
What am I doing wrong?
>
> <snip>
>
> LOG:
>
> [root at power bin]# cat
/var/www/html/mrtg.illicom.net/wireless/ccu101/ccu101_efficient.log  | more
> 1064862313 98.6317837805994 98.6317837805994
> 1064862313 0 0 0 0
> 1064862012 0 0 0 0
> 1064862000 0 0 0 0
> 1064861700 0 0 0 0
> 1064861400 0 0 0 0
> 1064861100 0 0 0 0
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi