[mrtg] Re: UPS runtime graphing

[Pete Templin]

OK, let me help:

Start here: http://members.urdirect.net/mrtg/ups/
Then go here: http://members.urdirect.net/mrtg/ups/san.ups
Then go here: http://members.urdirect.net/mrtg/ups/ups1-noc2.9.html
Then go here: http://members.urdirect.net/mrtg/ups/getruntime

It's all there.  In this case, specify the hostname/address, SNMP community, and applicable SNMP OID in the MRTG config file when you call the programming.  

Pete Templin
Senior Staff Engineer
TexLink Communications
(210) 892-4183
pete.templin at texlink.com


-----Original Message-----
From: Jason Humes [mailto:jhumes at acs.on.ca]
Sent: Tuesday, September 30, 2003 9:48 AM
To: Pete Templin; 'MRTG Mailing List'
Subject: RE: [mrtg] Re: UPS runtime graphing

OK great, someone else is doing what I would like to, yet this page you
linked to does not show the actual script being used for the conversion.
The script which was posted on this forum in regards to this question, I
don't understand where to put in my target IP address/community.  Please
help

-----Original Message-----
From: Pete Templin [mailto:pete.templin at texlink.com]
Sent: Tuesday, September 30, 2003 9:33 AM
To: Jason Humes; MRTG Mailing List
Subject: RE: [mrtg] Re: UPS runtime graphing


http://members.urdirect.net/mrtg/ups/ has sample configs and sample scripts
for an APC UPS.

HTH, YMMV.

Pete Templin
Senior Staff Engineer
TexLink Communications
(210) 892-4183
pete.templin at texlink.com


-----Original Message-----
From: Jason Humes [mailto:jhumes at acs.on.ca]
Sent: Tuesday, September 30, 2003 7:22 AM
To: 'David Gabler'; 'MRTG Mailing List'
Subject: [mrtg] Re: UPS runtime graphing

Hello
I've searched through the archives and found someone else who had this
problem, but it looks like he never got the help needed to resolve the
issue.  If anyone has any idea, please help.  THanks

-----Original Message-----
From: David Gabler [mailto:dgabler at TRUELINK.com]
Sent: Monday, September 29, 2003 4:08 PM
To: 'Jason Humes'; 'MRTG Mailing List'
Subject: RE: [mrtg] UPS runtime graphing


Try searching through the archives.  This has been addressed many times.


> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
> On Behalf Of Jason Humes
> Sent: Monday, September 29, 2003 12:45 PM
> To: 'MRTG Mailing List'
> Subject: [mrtg] UPS runtime graphing
>
>
> Hi
> I would like to graph the remaining runtime of my UPS battery pack,
> but the SNMP value it returns is a time, ie 02:10:22, meaning two
> hours, 10 minutes,
> etc remaining.  Any idea how I could graph this.  Thanks
> Jason D. Humes
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi