[mrtg] Especial counter (NncExtCounter64)

[VEN-LOPEZ, MOISES]

Hi  
I'm using MRTG 2.10.14 on a Windows NT workstation.
 I'm  to taking   the Rx- and TxFrames to check the utilisation of a CSU/DSU
equipment.  These equiment  will give me back a propietary counter called
(NncExtCounter64), this counter is conformed basicly in two parts,  one part
its a eigth octects hexadecimal and the other part its a eight  unicode
string. Its important to know that both parts of the counter give the same
value. 
It is an example with snmpget from cmd on windows:
begin of example:
C:\WINNT>snmpget 172.99.99.2 1.3.6.1.4.1.123.3.30.1.1.1.3.2297920
newbridge.nncExtensions.nncFrIntStatistics.nncFrIntStatisticsObjects.nncFrSt
rStatCurrentTable.nncFrStrStatCurrentEntry.nncFrStrStatCurrentInOctets.22979
20 :
OCTET STRING (hex):length = 8
 0:  00 00 00 00 00 00 21 51 -- -- -- -- -- -- -- --     ......!Q........
end of example
comments:
fitst part, hexadecimal notation = 00 00 00 00 00 00 21 51
second part, Unicode notation = ......!Q........
the value of  "! = 0021" and "Q = 0051".

Adicionaly I test with Getif, within the followinng result:
enterprises.1.3.6.1.4.1.123.3.30.1.1.1.3.2297920 :  0000000000002151

The problem was found in that Mrtg is given me the last value only (unicode
string) and not the hexadecimal value.
--snpo: SNMPfound -- '      !Q', '      !Q'

Somebody can help me to do Mrtg give me  the first value (hexadecimal
notation)?

Thanks for your help.

PD: sorry for my english

	



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi