[mrtg] Re: MRTG cisco 7200 per atm VCI

[Stefano Giraldo]

Sorry Chris,
but me and (i think ^_^) also Theresa aren't writing about
Virtual-Access Interfaces, but virtual or also named sub
interfaces.

Like for ATM: ATM3/0.10134
and for Ethernet: FastEthernet2/0.2
This kind of FastEthernet subinterfaces is
a virtual interface for a VLAN.

Bye,

        Ste.

----- 
Stefano Giraldo -
I.NET S.p.A. - Operations Department, Technical Support Engineer
Via Darwin, 85 20019 Settimo Milanese (MI), Italy
Phone: +39.02.33571 ext001 - Fax: +39.02.33571 ext404
----- 

----- Original Message ----- 
From: "Chris Stone" <cstone at axint.net>
To: "'Theresa Tucker'" <ttucker at smig.net>; <mrtg at list.ee.ethz.ch>
Sent: Thursday, August 12, 2004 10:15 PM
Subject: [mrtg] Re: MRTG cisco 7200 per atm VCI


> This is working for me on our 7206VXR:
>
> ### Interface 28 >> Descr: 'Virtual-Access1' | Name: 'Vi1' | Ip: '' | Eth:
> '' ###
>
> Target[ROUTER_IP_Vi1]: #Vi1:COMMUNITY at ROUTER_IP:
> SetEnv[ROUTER_IPt_Vi1]: MRTG_INT_IP="" MRTG_INT_DESCR="Virtual-Access1"
> MaxBytes[ROUTER_IP_Vi1]: 12500000
> Title[ROUTER_IP_Vi1]: Traffic Analysis for Vi1 -- ROUTER_IP
>
>
> ### Interface 29 >> Descr: 'Virtual-Access2' | Name: 'Vi2' | Ip: '' | Eth:
> '' ###
>
> Target[ROUTER_IP_Vi2]: #Vi2:COMMUNITY at ROUTER_IP:
> SetEnv[ROUTER_IP_Vi2]: MRTG_INT_IP="" MRTG_INT_DESCR="Virtual-Access2"
> MaxBytes[ROUTER_IP_Vi2]: 12500000
> Title[ROUTER_IP_Vi2]: Traffic Analysis for Vi2 -- ROUTER_IP
>
> ...etc....
>
>
> --------------------------------------------------------------------
> Chris Stone, MCSE
> Vice President, CTO
> AxisInternet, Inc.
> 910 16th St., Suite 1110, Denver, CO 80202
> --------------------------------------------------------------------
> PH  303.592.AXIS  -  866.317.AXIS  |  FAX  303.893.AXIS
> --------------------------------------------------------------------
> cstone at axint.net   |   www.axint.net
> --------------------------------------------------------------------
>
>
> > -----Original Message-----
> > From: mrtg-bounce at list.ee.ethz.ch
> > [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of Theresa Tucker
> > Sent: Thursday, August 12, 2004 8:06 AM
> > To: mrtg at list.ee.ethz.ch
> > Subject: [mrtg] MRTG cisco 7200 per atm VCI
> >
> > I am having trouble listing individual VCI 's with MRTG on a
> > cisco 7200.
> >
> > Does anyone have a sample configuration file?
> >
> > Any help would be appreciated!
> >
> > Thanks in advance!
> > Theresa Tucker
> >
> > --
> > Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> > Archive     http://www.ee.ethz.ch/~slist/mrtg
> > FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> > WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> >
> >
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi