[mrtg] Help with a template for Cisco FWSM?

[Nick Ellson]

Can anyone that has used a template for an interface help me with how to 
combate this issue?

The Cisco PIX FWSM firewall module uses virtual interfaces, so there is no 
hard speed coded for anything. Therefor the default cfgmaker will comment 
out each of my interfaces.


This is what I get: (what would I use as a template to force all 
interfaces to 100MBit.. (they all basically share a 600Mbit link to the 
switch back plane, but I think 100Mbit is a fair fixed value.)


example.cfg

# Created by 
# /usr/bin/cfgmaker --no-down --show-op-down --ifref descr 
--subdirs=HOSTNAME --global 'MaxBytes[_]: 125000000' 
--output=/etc/mrtg/configs/cyber-fw.cfg doggone at 172.21.28.113


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits

EnableIPv6: no
MaxBytes[_]: 125000000

######################################################################
# System: medusa-fw
# Description: Cisco Secure FWSM Firewall Version 1.1(3)10
#          
# Contact: 
# Location: 
######################################################################


### Interface 1 >> Descr: 'FWSM-Firewall-'inside'-interface' | Name: '' | 
Ip: '61.151.243.1' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# 
# Target[172.21.28.113_FWSM_Firewall_'inside'_interface]: \FWSM\ Firewall\ 
'inside'\ interface:doggone at 172.21.28.113:
# SetEnv[172.21.28.113_FWSM_Firewall_'inside'_interface]: 
MRTG_INT_IP="61.151.243.1" 
MRTG_INT_DESCR="FWSM-Firewall-'inside'-interface"
# Directory[172.21.28.113_FWSM_Firewall_'inside'_interface]: 172.21.28.113
# MaxBytes[172.21.28.113_FWSM_Firewall_'inside'_interface]: 0
# Title[172.21.28.113_FWSM_Firewall_'inside'_interface]: Traffic Analysis 
for FWSM Firewall 'inside' interface -- medusa-fw
# PageTop[172.21.28.113_FWSM_Firewall_'inside'_interface]: <H1>Traffic 
Analysis for FWSM Firewall 'inside' interface -- medusa-fw</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>medusa-fw in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>FWSM-Firewall-'inside'-interface  
</TD></TR>
#    <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#    <TR><TD>Ip:</TD>         <TD>61.151.243.1 ()</TD></TR>
#  </TABLE>



-- 
Nick Ellson
CCDA, CCNP, CCSP, CCAI, 
MCSE 2000, Security+, Network+
Network Hobbyist.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi