[mrtg] Re: cpu utilization for cisco 7206 and 3640

[Tobias Seda]

Hello,

use #sh proc cpu command.

cisco3640#sh proc cpu
CPU utilization for five seconds: 33%/30%; one minute: 28%; five minutes:
28%
 PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process
   1       18512    401723         46  0.00%  0.00%  0.00%   0 Load Meter
   2      583872   4058607        143  0.00%  0.00%  0.00%   0 OSPF Hello
   3     2186740    249657       8758  0.00%  0.11%  0.06%   0 Check
   9           0         1          0  0.00%  0.00%  0.00%   0 OIR


regards

Tobias Seda.



-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Tony Yee
Sent: Wednesday, February 04, 2004 9:54 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] cpu utilization for cisco 7206 and 3640


Hi All...
Does anyone have an example config for monitoring cpu load on a cisco 7206
or a cisco 3640? Any help is appreciated.
Thanks in advance,
Tony
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi