[mrtg] Re: Snmp Issue

Mon Feb 9 21:12:02 MET 2004

Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Maybe Mohsan is just being -interestingly- obfuscative about what his real=
 IP is, but if his 3640 _really_ does have a 169.254.1.1 address on it (and=
 he didn't make that up to protect the innocent in his post)=20
then it's highly likely that the problem is routing-
Since he mentions his presumably actual community string (not a secure=
 thing to tell us all what _that_ is..), perhaps the 169.254.1.1 really is=
 the IP?

Mohsan- Assuming that the 169.254.1.1 address is what's really on your=
 router, can you ping that?
As I'm sure you know, the 169.254 subnet is reserved and not routable...

Try portscanning that IP to see if there's an SNMP server running...

---- Message from mailto:<simon.strutt at thomson.com "Strutt, Simon"=
 <simon.strutt at thomson.com> at 2004-02-09 07:51:57 ------

As the error message says, the problem is that your SNMP requests are not
receiving a response.  Either the SNMP request isn't reaching your Motorola,
theres no SNMP server running on it, the community name is wrong, or some
other similar reason, probably best for you to investigate further...
-----Original Message-----
From: Mohsan Sarwar [mailto:mohsan at leobroadband.com]
Sent: 07 February 2004 08:44
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Snmp Issue

I want to Mointor the Bandwidth utilization on Motorola canopy,, but it
given me errors Listed below. kindly give me the Solution.

C:\mrtg-2.10.0pre8\bin>perl cfgmaker canopy at 169.254.1.1 --global "WorkDir:
C:\i
etpub\wwwroot\ali" --output 3640.cfg
--base: Get Device Info on canopy at 169.254.1.1:
SNMP Error:
no response received
SNMPv1_Session (remote host: "169.254.1.1" [169.254.1.1].161)
                  community: "canopy"
                 request ID: 1939376997
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPWALK Problem for 1.3.6.1.2.1.1 on canopy at 169.254.1.1::::::v4only
WARNING: Skipping canopy at 169.254.1.1: as no info could be retreived

--base: Writing 3640.cfg

C:\mrtg-2.10.0pre8\bin>

waiting for a positive responce.

Mohsan Sarwar
Wireless Network Engineer,
LEO Broadband.
68-C, Model Town,Lahore.
mohsan at leobroadband.com
Mobile#0300-4478083
Tel#+92-42-5868947-5858068
Fax#+92-42-5857068

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=3Dunsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

"This communication is intended solely for the addressee and is=
 confidential and not for third party unauthorised distribution."

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=3Dunsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

-- Attached file removed by Ecartis and put at URL below --
-- Type: text/directory
-- Size: 169 bytes
-- URL : http://www.ee.ethz.ch/~slist/p/04-tim_reimers.vcf

-- Binary/unsupported file stripped by Ecartis --
-- Err : No filename to use for decode, file stripped.
-- Type: text/plain

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi