[mrtg] Re: spike -v- continum

[Patricia A Malinowski]

Thank you, I have those options, among others...
here is my config and the link below idicates the results.

Target[MyRouter_ATM_CRC]: 1.3.6.1.4.1.9.2.2.1.1.12.1&1.3.6.1.4.1.9.2.2.1.1.12.1:communitystring at MyRouter:
#SetEnv[MyRouter_ATM_CRC]: MRTG_INT_IP=""MRTG_DESCR="ATM0/0/0"
MaxBytes[MyRouter_ATM_CRC]: 74880000
Title[MyRouter_ATM_CRC]: CRC Errors for Routerr Main ATM Interface
PageTop[MyRouter_ATM_CRC]: <H1>CRC Errors for Router Main ATM Interface</H1>
 <TABLE>
#  <TR><TD>System:</TD>  <TD>MyRouter.domainname in a Switch Room
# </TD></TR>
#  <TR><TD>Maintainer:</TD> <TD>IS HelpDesk</TD></TR>
#  <TR><TD>Description:</TD><TD>ATM0/0/0 Backbone LANE connection</TD></TR>
#  <TR><TD>ifType:</TD>   <TD>sonet (39)</TD></TR>
#  <TR><TD>ifName:</TD>    <TD></TD></TR>
  <TR><TD>Max Speed:</TD>  <TD>74.9 MBytes/s</TD></TR>
 </TABLE>
Options[MyRouter_ATM_CRC]: growright, nopercent, integer, gauge, noo, unknaszero
Colours[MyRouter_ATM_CRC]: GREEN#00eb0c,BLUE#1000ff,VIOLET#ff00ff,ORANGE#ff7900
WithPeak[MyRouter_ATM_CRC]: ymw

http://141.161.100.200/int-rtr1_atm_crc.html

-Patricia

----- Original Message -----
From: Wolfgang Wagner <wolfgang.wagner at riwa-gis.de>
Date: Thursday, February 26, 2004 10:50 am
Subject: [mrtg] Re: spike -v- continum

> > From: Patricia A. Malinowski [pam43 at georgetown.edu] 
> > 
> > Hi Everyone,
> > Does anyone know if there is an option I can use such that my 
> > graphs are spikes (for lack of a better term), then a continum line.
> > I'm monitoring errors on the router and if at the polling 
> > interval it hits 19 errors, I want to plot the 19, then if 
> > the next polling interval hits 5 - I'd like to plot the 5, 
> > without a graphing line/color connecting and shading in the 
> > area, but just a spike up to the plotted number?
> 
> Hi Patricia,
> 
> try the option :
> Options[Temperatur]: gauge,nopercent
> 
> Maybe this is what you are searching for?
> 
> 
> Mit freundlichen Grüßen
> 
> 
> Wolfgang Wagner
> --
> Systemadministration
> Riwa GmbH, Zwingerstraße 1, 87435 Kempten, +49-831-52 29 63-537
> eMail:    wolfgang.wagner at riwa-gis.de
> 
> 
> --
> Unsubscribe mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi