[mrtg] Re: Config file for VpnConcentrator
Kirk Schneider
kschneider at raytheon.com
Fri Feb 27 20:58:12 MET 2004
Shawn,
configmaker does setup the interfaces, but in order to get
number of sessions, cpu, temp and fan you can add the following
to your .cfg file. You'll need to modify HOSTNAME and PUBLIC.
# Altiga VPN 3005
Target[HOSTNAME.sessions]: 1.3.6.1.4.1.3076.2.1.2.17.1.9.0&1.3.6.1.4.1.3076.2.1.2.17.1.9.0:PUBLIC at HOSTNAME
AbsMax[HOSTNAME.sessions]: 5000
MaxBytes[HOSTNAME.sessions]: 5000
Title[HOSTNAME.sessions]: Sessions -- HOSTNAME
PageTop[HOSTNAME.sessions]: <H1>Sessions -- HOSTNAME</H1>
Options[HOSTNAME.sessions]: gauge, growright, nopercent, noo
YLegend[HOSTNAME.sessions]: Sessions
ShortLegend[HOSTNAME.sessions]:
Legend1[HOSTNAME.sessions]: Active sessions
Legend2[HOSTNAME.sessions]: Active sessions
LegendI[HOSTNAME.sessions]: Active sessions
LegendO[HOSTNAME.sessions]: Active sessions
Target[HOSTNAME.cpu]: 1.3.6.1.4.1.3076.2.1.2.25.1.2.0&1.3.6.1.4.1.3076.2.1.2.25.1.2.0:PUBLIC at HOSTNAME
AbsMax[HOSTNAME.cpu]: 100
MaxBytes[HOSTNAME.cpu]: 100
Title[HOSTNAME.cpu]: CPU -- HOSTNAME
PageTop[HOSTNAME.cpu]: <H1>CPU -- HOSTNAME</H1>
Options[HOSTNAME.cpu]: gauge, growright, nopercent
YLegend[HOSTNAME.cpu]: CPU
ShortLegend[HOSTNAME.cpu]:
Legend1[HOSTNAME.cpu]: CPU Usage gauge
Legend2[HOSTNAME.cpu]: CPU Usage gauge
LegendI[HOSTNAME.cpu]: CPU Usage (%)
LegendO[HOSTNAME.cpu]: CPU Usage (%)
Target[HOSTNAME.fan]: 1.3.6.1.4.1.3076.2.1.2.22.1.37.0&1.3.6.1.4.1.3076.2.1.2.22.1.41.0:PUBLIC at HOSTNAME
AbsMax[HOSTNAME.fan]: 10000
MaxBytes[HOSTNAME.fan]: 10000
Title[HOSTNAME.fan]: Fans -- HOSTNAME
PageTop[HOSTNAME.fan]: <H1>Fans -- HOSTNAME</H1>
Options[HOSTNAME.fan]: gauge, growright, nopercent
YLegend[HOSTNAME.fan]: RPM
ShortLegend[HOSTNAME.fan]: RPM
Legend1[HOSTNAME.fan]: Fan 1 RPM
Legend2[HOSTNAME.fan]: Fan 2 RPM
LegendI[HOSTNAME.fan]: Fan 1
LegendO[HOSTNAME.fan]: Fan 2
Target[HOSTNAME.temp]: 1.3.6.1.4.1.3076.2.1.2.22.1.29.0&1.3.6.1.4.1.3076.2.1.2.22.1.33.0:PUBLIC at HOSTNAME
AbsMax[HOSTNAME.temp]: 100
MaxBytes[HOSTNAME.temp]: 70
Title[HOSTNAME.temp]: Temperature -- HOSTNAME
PageTop[HOSTNAME.temp]: <H1>Temperature -- HOSTNAME</H1>
Options[HOSTNAME.temp]: gauge, growright, nopercent
YLegend[HOSTNAME.temp]: Temp C
ShortLegend[HOSTNAME.temp]: C
Legend1[HOSTNAME.temp]: CPU temp C
Legend2[HOSTNAME.temp]: Cage temp C
LegendI[HOSTNAME.temp]: CPU temp
LegendO[HOSTNAME.temp]: Cage temp
--
Kirk Schneider 972-952-4645 (work)
Raytheon Corporate IT Security 214-912-8679 (cell)
kschneider at raytheon.com 888-431-7621 (pager)
"If you think the problem is bad now just wait until we've solved it."
-------- Original Message --------
Subject: [mrtg] Config file for VpnConcentrator
Date: Fri, 27 Feb 2004 13:43:41 -0600
From: Shawn Smith <acegator at hotmail.com>
To: <mrtg at list.ee.ethz.ch>
Does anyone have a config file for a Cisco 3000 series concentrator that will monitor Bandwidth on individual Lan -to - Lan connections, cpu temperature?. Utilitzation. .. etc. I have one that will monitor concurrent user sessions :
Target[1.2.3.4]: 1.3.6.1.4.1.3076.2.1.2.17.1.1.0&1.3.6.1.4.1.3076.2.1.2.17.1.1.0:vpn at 1.2.34
Options[1.2.3.4]: gauge, unknaszero, nopercent, growright
MaxBytes[1.2.3.4]: 100
YLegend[1.2.3.4]: Sessions
WithPeak[1.2.3.4]: wmy
Colours[1.2.3.4]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
Legend1[1.2.3.4]: Number of VPN Sessions
Legend2[1.2.3.4]: .
Legend3[1.2.3.4]: Peak # of VPN Sessions
Legend4[1.2.3.4]: .
LegendI[1.2.3.4]: Sessions:
LegendO[1.2.3.4]: .
Title[1.2.3.4]: YOur title here
PageTop[1.2.3.4]: <H1>Your title here</H1>
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list