From alex at ergens.op.het.net  Thu Jan  1 15:34:51 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Thu, 1 Jan 2004 15:34:51 +0100
Subject: [mrtg] Re: [rrd-users] mrtg/rrdtool problem
In-Reply-To: <2881CBB9A17C8A4692A36E7B8EF0AE6D0245DC5B@pegasus.northstar.net>; from LesterH@northstar.net on Wed, Dec 31, 2003 at 01:54:58PM -0600
References: <2881CBB9A17C8A4692A36E7B8EF0AE6D0245DC5B@pegasus.northstar.net>
Message-ID: <20040101153451.B22062@slot.hollandcasino.net>

On Wed, Dec 31, 2003 at 01:54:58PM -0600, Lester, Hiram wrote:

> ERROR: Target[10.72.19.1_1][_IN_] ' $target->[0]{$mode} ' did not eval into
> defined data
> ERROR: Target[10.72.19.1_1][_OUT_] ' $target->[0]{$mode} ' did not eval into
> defined data
> ERROR: Target[10.72.19.1_2][_IN_] ' $target->[1]{$mode} ' did not eval into
> defined data
> ERROR: Target[10.72.19.1_2][_OUT_] ' $target->[1]{$mode} ' did not eval into
> defined data

> If someone can give me some idea what to try next to get this working, I'd
> appreciate it. Thanks.

The problem seems to be in MRTG.  Search the archives, perhaps the problem
is already known and can be solved by running another version or giving
different options (unknown_as_zero comes to mind).

HTH
Alex
-- 
begin of my sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From peter_glanville at cuk.canon.co.uk  Fri Jan  2 10:08:34 2004
From: peter_glanville at cuk.canon.co.uk (Peter Glanville)
Date: Fri, 2 Jan 2004 09:08:34 +0000
Subject: [mrtg] Re: Unscaled/MaxBytes/AbsMax
Message-ID: <OF935BBB30.6C1B09ED-ON80256E0F.0031AE09@cuk.canon.co.uk>



>  I thought maybe if I set MaxBytes for 250000
> and AbsMax to 125000000 and then issuing the Unscaled command for the
> target, I'd get a graph that had a Y with no more than 200Kb/s visible,
> but MRTG would still accept larger numbers (which would represent a
> majority of the LAN traffic).

Almost correct. If there were no spikes, Y would be maxbytes.
When MRTG accepts higher values (up to AbsMax), it also plots them, and
will adjust the scale if needed.

> As it is, the occasional large spikes from file transfers between the
> server and local workstations, it causes all traffic where the web
> server is communicating with the T1 to pretty much be invisible on the
> graph.

Thats the problem with this technique

> Any suggestions?

Create two graphs.
One with a high absmax (or maxbytes), one with low maxbytes and no absmax.
The first will show everything including the spikes. The second will cut
the spikes off, and show you the low level in a readable manner.

Peter





--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From list at weben.nu  Fri Jan  2 14:03:06 2004
From: list at weben.nu (Lennie)
Date: Fri, 2 Jan 2004 14:03:06 +0100
Subject: [mrtg] Problem whit CPU monitoring on windows 2003 and windows 2000 server
Message-ID: <011701c3d130$f0215ea0$1701a8c0@phonera.local>

I have a problem whit my mrtg config file.
i am monitoring 2 computer. 
one windows 2003 server
and one windows 2000 server.
when i am monitoring the CPU on the windows 20003 server everthings works perfekt.
but. when i am using the some settings for the windows 2000 server. i get a lots of error messages.
the config file i am using looks like this:
<--------->
# Global Options
WorkDir: c:\inetpub\MRTG\ny\data
Interval: 5
RunAsDaemon: Yes


# Common Options
# Options[_]: growright, bits
AddHead[_]: <style type="text/css"> <!--
 a { color: #263F66; text-decoration: none; }
 a:hover { color: #785B41; text-decoration: none; }
 body { color: black; font: 8pt Verdana, Geneva, Arial, Helvetica, sans-serif; }
 h1 { font: bold 16pt Verdana, Geneva, Arial, Helvetica,  sans-serif; color: #342A21; }
 h2 { color: #666666; font: bold 12pt Verdana, Geneva, Arial, Helvetica, sans-serif; }
 h3 { color: black; font: bold 9pt Verdana, Geneva, Arial, Helvetica, sans-serif; }
 table { border: 0; }
 td { background-color: #E7DDD3; border: 0px solid #FFFFFF; color: Black; font: 8pt Verdana, Geneva, Arial,  Helvetica, sans-serif; vertical-align: top; }
 th { background-color: #735A4A; color: White; font: 11px  Verdana, arial, geneva, helvetica, sans-serif;   border: 0;  font-weight: bold;  text-align: left;    }
 -->
 </style>
Background[_]: #F6F1EE
XSize[_]: 370
YSize[_]: 60
WithPeak[_]: ymw

YLegend[trevelyan.CPU]: % Usage
Options[trevelyan.CPU]: growright,gauge,nobanner,noarrow
Target[trevelyan.CPU]: .1.3.6.1.2.1.25.3.3.1.2.1&.1.3.6.1.2.1.25.3.3.1.2.2:phonera at 192.168.1.54
MaxBytes[trevelyan.CPU]: 100
Title[trevelyan.CPU]: CPU Load
ShortLegend[trevelyan.CPU]: %
Legend1[trevelyan.CPU]: % CPU 1 Usage
Legend2[trevelyan.CPU]: % CPU 2 Usage
Legend3[trevelyan.CPU]: Max CPU 1 Usage
Legend4[trevelyan.CPU]: Max CPU 2 Usage
LegendI[trevelyan.CPU]: CPU 1 Usage:
LegendO[trevelyan.CPU]: CPU 2 Usage:
PageTop[trevelyan.CPU]: <H1>CPU - Trevelyan</H1>

YLegend[blofeld.CPU]: % Usage
Options[blofeld.CPU]: growright,gauge,nobanner,noarrow
Target[blofeld.CPU]: .1.3.6.1.2.1.25.3.3.1.2.1&.1.3.6.1.2.1.25.3.3.1.2.2:phonera at 192.168.1.50
MaxBytes[blofeld.CPU]: 100
Title[blofeld.CPU]: CPU Load
ShortLegend[blofeld.CPU]: %
Legend1[blofeld.CPU]: % CPU 1 Usage
Legend2[blofeld.CPU]: % CPU 2 Usage
Legend3[blofeld.CPU]: Max CPU 1 Usage
Legend4[blofeld.CPU]: Max CPU 2 Usage
LegendI[blofeld.CPU]: CPU 1 Usage:
LegendO[blofeld.CPU]: CPU 2 Usage:
PageTop[blofeld.CPU]: <H1>CPU - Blofeld</H1>

<--------->
The server whit ipnummer 192.168.1.54 is the windows 2003 server.
and the server whit ip 192.168.1.50 is the windows 2000 server.

The error messages looks like this

<---------->
C:\Program Files\mrtg\bin>perl mrtg cpu.cfg
Daemonizing MRTG ...
Do Not close this window. Or MRTG will die
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.25.3.3.1.2.1)
SNMPv1_Session (remote host: "192.168.1.50" [192.168.1.50].161)
                  community: "phonera"
                 request ID: 1356470671
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at C:/Program Files/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 487
SNMPGET Problem for .1.3.6.1.2.1.25.3.3.1.2.1 .1.3.6.1.2.1.25.3.3.1.2.2 sysUptim
e sysName on phonera at 192.168.1.50::::::v4only
 at mrtg line 1827
ERROR: Target[blofeld.cpu][_IN_] ' $target->[1]{$mode} ' did not eval into defin
ed data
ERROR: Target[blofeld.cpu][_OUT_] ' $target->[1]{$mode} ' did not eval into defi
ned data
Use of uninitialized value in numeric lt (<) at mrtg line 371.
Use of uninitialized value in numeric lt (<) at mrtg line 375.
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.25.3.3.1.2.1)
SNMPv1_Session (remote host: "192.168.1.50" [192.168.1.50].161)
                  community: "phonera"
                 request ID: 295058229
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at C:/Program Files/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 487
SNMPGET Problem for .1.3.6.1.2.1.25.3.3.1.2.1 .1.3.6.1.2.1.25.3.3.1.2.2 sysUptim
e sysName on phonera at 192.168.1.50::::::v4only
 at mrtg line 1827
ERROR: Target[blofeld.cpu][_IN_] ' $target->[1]{$mode} ' did not eval into defin
ed data
ERROR: Target[blofeld.cpu][_OUT_] ' $target->[1]{$mode} ' did not eval into defi
ned data
Use of uninitialized value in numeric lt (<) at mrtg line 371.
Use of uninitialized value in numeric lt (<) at mrtg line 375.
<------------>

// Lennie
IT-dep phonera AB

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Fri Jan  2 14:18:32 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Fri, 2 Jan 2004 14:18:32 +0100
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows 2000 server
In-Reply-To: <011701c3d130$f0215ea0$1701a8c0@phonera.local>; from list@weben.nu on Fri, Jan 02, 2004 at 02:03:06PM +0100
References: <011701c3d130$f0215ea0$1701a8c0@phonera.local>
Message-ID: <20040102141832.A27929@slot.hollandcasino.net>

On Fri, Jan 02, 2004 at 02:03:06PM +0100, Lennie wrote:
> I have a problem whit my mrtg config file.
> i am monitoring 2 computer. 
> one windows 2003 server
> and one windows 2000 server.
> when i am monitoring the CPU on the windows 20003 server everthings works perfekt.
> but. when i am using the some settings for the windows 2000 server. i get a lots of error messages.



> SNMP Error:
> Received SNMP response with error code
>   error status: noSuchName
>   index 1 (OID: 1.3.6.1.2.1.25.3.3.1.2.1)

> SNMPGET Problem for .1.3.6.1.2.1.25.3.3.1.2.1 .1.3.6.1.2.1.25.3.3.1.2.2 sysUptim
> e sysName on phonera at 192.168.1.50::::::v4only
>  at mrtg line 1827

You are asking for 1.3.6.1.2.1.25.3.3.1.2.1 and this does not exist
on the W2k server (error status: noSuchName).

I cannot help you with configuring the snmp server on that box.

HTH
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From William.Owen at ProfilesInternational.com  Fri Jan  2 14:46:08 2004
From: William.Owen at ProfilesInternational.com (William Owen)
Date: Fri, 2 Jan 2004 07:46:08 -0600 
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and wi
	ndows 2000 server
Message-ID: <B1614B3FC265554DADE169EE8146665E017B5F9A@piexchange1.piicorp.org>

Win2k has a tendency to change the instance numbers of your Processors when
reboots occur.  I would recommend using the Free version of SNMP2CA
(http://www.snmp4tpc.com/snmp2ca.htm).  It will add the 1.3.6.1.4.1.9600
branch to a Win2k, Win2k3 or XP machine that won't change.  It also allows
you to standardize your config files between the two.

-----Original Message-----
From: Alex van den Bogaerdt [mailto:alex at ergens.op.het.net] 
Sent: Friday, January 02, 2004 7:19 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server

On Fri, Jan 02, 2004 at 02:03:06PM +0100, Lennie wrote:
> I have a problem whit my mrtg config file.
> i am monitoring 2 computer. 
> one windows 2003 server
> and one windows 2000 server.
> when i am monitoring the CPU on the windows 20003 server everthings works
perfekt.
> but. when i am using the some settings for the windows 2000 server. i get
a lots of error messages.



> SNMP Error:
> Received SNMP response with error code
>   error status: noSuchName
>   index 1 (OID: 1.3.6.1.2.1.25.3.3.1.2.1)

> SNMPGET Problem for .1.3.6.1.2.1.25.3.3.1.2.1 .1.3.6.1.2.1.25.3.3.1.2.2
sysUptim
> e sysName on phonera at 192.168.1.50::::::v4only
>  at mrtg line 1827

You are asking for 1.3.6.1.2.1.25.3.3.1.2.1 and this does not exist
on the W2k server (error status: noSuchName).

I cannot help you with configuring the snmp server on that box.

HTH
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From list at weben.nu  Fri Jan  2 14:52:01 2004
From: list at weben.nu (Lennie)
Date: Fri, 2 Jan 2004 14:52:01 +0100
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows 2000 server
References: <011701c3d130$f0215ea0$1701a8c0@phonera.local> <20040102141832.A27929@slot.hollandcasino.net>
Message-ID: <016e01c3d138$0f6c5ec0$1701a8c0@phonera.local>

Hello.

do you know where i can find the name of the target to use for monitoring
the cpu 1 & 2 on me windows 2000 server ?

// Lennie

----- Original Message ----- 
From: "Alex van den Bogaerdt" <alex at ergens.op.het.net>
To: <mrtg at list.ee.ethz.ch>
Sent: Friday, January 02, 2004 2:18 PM
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server


> On Fri, Jan 02, 2004 at 02:03:06PM +0100, Lennie wrote:
> > I have a problem whit my mrtg config file.
> > i am monitoring 2 computer.
> > one windows 2003 server
> > and one windows 2000 server.
> > when i am monitoring the CPU on the windows 20003 server everthings
works perfekt.
> > but. when i am using the some settings for the windows 2000 server. i
get a lots of error messages.
>
>
>
> > SNMP Error:
> > Received SNMP response with error code
> >   error status: noSuchName
> >   index 1 (OID: 1.3.6.1.2.1.25.3.3.1.2.1)
>
> > SNMPGET Problem for .1.3.6.1.2.1.25.3.3.1.2.1 .1.3.6.1.2.1.25.3.3.1.2.2
sysUptim
> > e sysName on phonera at 192.168.1.50::::::v4only
> >  at mrtg line 1827
>
> You are asking for 1.3.6.1.2.1.25.3.3.1.2.1 and this does not exist
> on the W2k server (error status: noSuchName).
>
> I cannot help you with configuring the snmp server on that box.
>
> HTH
> Alex
> -- 
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From LesterH at northstar.net  Fri Jan  2 14:59:53 2004
From: LesterH at northstar.net (Lester, Hiram)
Date: Fri, 2 Jan 2004 07:59:53 -0600 
Subject: [mrtg] Re: mrtg/rrdtool problem
Message-ID: <2881CBB9A17C8A4692A36E7B8EF0AE6D0245DC60@pegasus.northstar.net>

This seems to be the problem. Now to do some research to discover whether I
need to go to an earlier version of mrtg or if I can leave the Forks:
setting out of the config file. Thanks. 


Hiram Lester, Jr., MCSE, MCP+I
Network Engineer
NorthStar Communications Group


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Vern Dias
Sent: Wednesday, December 31, 2003 4:22 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: mrtg/rrdtool problem


 I now
> get the following errors:
>
> ERROR: Target[10.72.19.1_1][_IN_] ' $target->[0]{$mode} ' did not eval
into
> defined data

If you have a Forks: statement in your config file, try removing it.

If this is your problem revert to 2.10.5, which is the last release that
works properly for me with a Forks: and RRDTOOL.

Anything later than 2.10.5 gives me this error.

Vern

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From list at weben.nu  Fri Jan  2 16:27:16 2004
From: list at weben.nu (Lennie)
Date: Fri, 2 Jan 2004 16:27:16 +0100
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows 2000 server
References: <B1614B3FC265554DADE169EE8146665E017B5F9A@piexchange1.piicorp.org>
Message-ID: <019801c3d145$0eaa5b60$1701a8c0@phonera.local>

So.. now i have downloaded and installed the Free version of SNMP2CA.
but i still dont get it to work.
it?s that anything wrong whit this line ??

Target[blofeld.CPU]: 1.3.6.1.4.1.9600.1.1.5.1.5:phonera at 192.168.1.50

it is stil teling me that: noSuchName

// Lennie




----- Original Message ----- 
From: "William Owen" <William.Owen at ProfilesInternational.com>
To: "'Alex van den Bogaerdt'" <alex at ergens.op.het.net>;
<mrtg at list.ee.ethz.ch>
Sent: Friday, January 02, 2004 2:46 PM
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server


> Win2k has a tendency to change the instance numbers of your Processors
when
> reboots occur.  I would recommend using the Free version of SNMP2CA
> (http://www.snmp4tpc.com/snmp2ca.htm).  It will add the 1.3.6.1.4.1.9600
> branch to a Win2k, Win2k3 or XP machine that won't change.  It also allows
> you to standardize your config files between the two.
>
> -----Original Message-----
> From: Alex van den Bogaerdt [mailto:alex at ergens.op.het.net]
> Sent: Friday, January 02, 2004 7:19 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows
> 2000 server
>
> On Fri, Jan 02, 2004 at 02:03:06PM +0100, Lennie wrote:
> > I have a problem whit my mrtg config file.
> > i am monitoring 2 computer.
> > one windows 2003 server
> > and one windows 2000 server.
> > when i am monitoring the CPU on the windows 20003 server everthings
works
> perfekt.
> > but. when i am using the some settings for the windows 2000 server. i
get
> a lots of error messages.
>
>
>
> > SNMP Error:
> > Received SNMP response with error code
> >   error status: noSuchName
> >   index 1 (OID: 1.3.6.1.2.1.25.3.3.1.2.1)
>
> > SNMPGET Problem for .1.3.6.1.2.1.25.3.3.1.2.1 .1.3.6.1.2.1.25.3.3.1.2.2
> sysUptim
> > e sysName on phonera at 192.168.1.50::::::v4only
> >  at mrtg line 1827
>
> You are asking for 1.3.6.1.2.1.25.3.3.1.2.1 and this does not exist
> on the W2k server (error status: noSuchName).
>
> I cannot help you with configuring the snmp server on that box.
>
> HTH
> Alex
> -- 
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jwixted at limecity.com  Fri Jan  2 16:28:36 2004
From: jwixted at limecity.com (Joe Wixted)
Date: Fri, 2 Jan 2004 10:28:36 -0500
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows 2000 server
Message-ID: <4C558BF864410C4FA00F8458F4A2F3FC3BAF@dell2003.limecity.local>

Have you been able to walk that oid with GetIF or some other SNMP tool?

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of Lennie
Sent: Friday, January 02, 2004 10:27 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows 2000 server

So.. now i have downloaded and installed the Free version of SNMP2CA.
but i still dont get it to work.
it?s that anything wrong whit this line ??

Target[blofeld.CPU]: 1.3.6.1.4.1.9600.1.1.5.1.5:phonera at 192.168.1.50

it is stil teling me that: noSuchName

// Lennie




----- Original Message ----- 
From: "William Owen" <William.Owen at ProfilesInternational.com>
To: "'Alex van den Bogaerdt'" <alex at ergens.op.het.net>;
<mrtg at list.ee.ethz.ch>
Sent: Friday, January 02, 2004 2:46 PM
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server


> Win2k has a tendency to change the instance numbers of your Processors
when
> reboots occur.  I would recommend using the Free version of SNMP2CA
> (http://www.snmp4tpc.com/snmp2ca.htm).  It will add the 1.3.6.1.4.1.9600
> branch to a Win2k, Win2k3 or XP machine that won't change.  It also allows
> you to standardize your config files between the two.
>
> -----Original Message-----
> From: Alex van den Bogaerdt [mailto:alex at ergens.op.het.net]
> Sent: Friday, January 02, 2004 7:19 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows
> 2000 server
>
> On Fri, Jan 02, 2004 at 02:03:06PM +0100, Lennie wrote:
> > I have a problem whit my mrtg config file.
> > i am monitoring 2 computer.
> > one windows 2003 server
> > and one windows 2000 server.
> > when i am monitoring the CPU on the windows 20003 server everthings
works
> perfekt.
> > but. when i am using the some settings for the windows 2000 server. i
get
> a lots of error messages.
>
>
>
> > SNMP Error:
> > Received SNMP response with error code
> >   error status: noSuchName
> >   index 1 (OID: 1.3.6.1.2.1.25.3.3.1.2.1)
>
> > SNMPGET Problem for .1.3.6.1.2.1.25.3.3.1.2.1 .1.3.6.1.2.1.25.3.3.1.2.2
> sysUptim
> > e sysName on phonera at 192.168.1.50::::::v4only
> >  at mrtg line 1827
>
> You are asking for 1.3.6.1.2.1.25.3.3.1.2.1 and this does not exist
> on the W2k server (error status: noSuchName).
>
> I cannot help you with configuring the snmp server on that box.
>
> HTH
> Alex
> -- 
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Eric_Mailing_List at rednarb.com  Fri Jan  2 16:37:19 2004
From: Eric_Mailing_List at rednarb.com (Eric Brander)
Date: Fri, 2 Jan 2004 09:37:19 -0600
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows 2000 server
References: <B1614B3FC265554DADE169EE8146665E017B5F9A@piexchange1.piicorp.org> <019801c3d145$0eaa5b60$1701a8c0@phonera.local>
Message-ID: <023801c3d146$620dbfd0$fab3bed0@IS14805>

----- Original Message ----- 
From: "Lennie" <list at weben.nu>
To: <mrtg at list.ee.ethz.ch>
Sent: Friday, January 02, 2004 9:27 AM
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows 2000 server


So.. now i have downloaded and installed the Free version of SNMP2CA.
but i still dont get it to work.
it?s that anything wrong whit this line ??

Target[blofeld.CPU]: 1.3.6.1.4.1.9600.1.1.5.1.5:phonera at 192.168.1.50

it is stil teling me that: noSuchName

// Lennie

All targets must have 2 "things" to poll.  Try:

Target[blofeld.CPU]:
1.3.6.1.4.1.9600.1.1.5.1.5&1.3.6.1.4.1.9600.1.1.5.1.5:phonera at 192.168.1.
50

And add NOO to your options.

Eric Brander
Eric_Mailing_List at rednarb dot com


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From LesterH at northstar.net  Fri Jan  2 16:29:24 2004
From: LesterH at northstar.net (Lester, Hiram)
Date: Fri, 2 Jan 2004 09:29:24 -0600 
Subject: [mrtg] Re: mrtg/rrdtool problem
Message-ID: <2881CBB9A17C8A4692A36E7B8EF0AE6D0245DC61@pegasus.northstar.net>

Ok, I see some references to the new fork code being incompatible with Perl
5.6. I'm wondering if this might be causing my problems. I am running Perl
5.6.1 on this box and I see there were changes to the forks code starting
with mrtg 2.10.6.


Hiram Lester, Jr., MCSE, MCP+I
Network Engineer
NorthStar Communications Group


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Lester, Hiram
Sent: Friday, January 02, 2004 8:00 AM
To: 'Vern Dias'; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: mrtg/rrdtool problem

This seems to be the problem. Now to do some research to discover whether I
need to go to an earlier version of mrtg or if I can leave the Forks:
setting out of the config file. Thanks. 


Hiram Lester, Jr., MCSE, MCP+I
Network Engineer
NorthStar Communications Group


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Vern Dias
Sent: Wednesday, December 31, 2003 4:22 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: mrtg/rrdtool problem


 I now
> get the following errors:
>
> ERROR: Target[10.72.19.1_1][_IN_] ' $target->[0]{$mode} ' did not eval
into
> defined data

If you have a Forks: statement in your config file, try removing it.

If this is your problem revert to 2.10.5, which is the last release that
works properly for me with a Forks: and RRDTOOL.

Anything later than 2.10.5 gives me this error.

Vern

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From ccongdon at congdonweb.com  Fri Jan  2 19:41:16 2004
From: ccongdon at congdonweb.com (Christopher A. Congdon)
Date: Fri, 2 Jan 2004 13:41:16 -0500
Subject: [mrtg] Re: Unscaled/MaxBytes/AbsMax
Message-ID: <BD034E316CA90C43AE1C43B57D36007EF00D@exchange.congdonweb.local>

Pj4gIEkgdGhvdWdodCBtYXliZSBpZiBJIHNldCBNYXhCeXRlcyBmb3IgMjUwMDAwDQo+PiBhbmQg
QWJzTWF4IHRvIDEyNTAwMDAwMCBhbmQgdGhlbiBpc3N1aW5nIHRoZSBVbnNjYWxlZCBjb21tYW5k
IGZvciB0aGUNCj4+IHRhcmdldCwgSSdkIGdldCBhIGdyYXBoIHRoYXQgaGFkIGEgWSB3aXRoIG5v
IG1vcmUgdGhhbiAyMDBLYi9zIHZpc2libGUsDQo+PiBidXQgTVJURyB3b3VsZCBzdGlsbCBhY2Nl
cHQgbGFyZ2VyIG51bWJlcnMgKHdoaWNoIHdvdWxkIHJlcHJlc2VudCBhDQo+PiBtYWpvcml0eSBv
ZiB0aGUgTEFOIHRyYWZmaWMpLg0KPg0KPkFsbW9zdCBjb3JyZWN0LiBJZiB0aGVyZSB3ZXJlIG5v
IHNwaWtlcywgWSB3b3VsZCBiZSBtYXhieXRlcy4NCj5XaGVuIE1SVEcgYWNjZXB0cyBoaWdoZXIg
dmFsdWVzICh1cCB0byBBYnNNYXgpLCBpdCBhbHNvIHBsb3RzIHRoZW0sIGFuZA0KPndpbGwgYWRq
dXN0IHRoZSBzY2FsZSBpZiBuZWVkZWQuDQo+DQogDQpJIGd1ZXNzIHRvIG1lIHRoZW4sIHRoYXQg
YmVoYXZpb3Igc2VlbXMgaW5jb3Npc3RlbnQuIEkgd291bGQgdGhpbmsgaWYgeW91IHNldCBpdCB1
cCBpbiAyIGRpZmZlcmVudCBtYW5uZXJzLCB5b3Ugd291bGQgZ2V0IDIgZGlmZmVyZW50IHJlc3Vs
dHMuIEd1ZXNzIHRoYXQncyBhIG1vcmUgaW4gZGVwdGggZGlzY3Vzc2lvbiBob3dldmVyLiBJdCdz
IGp1c3QgdGhhdCB0byBtZSwgaXQgc2VlbXMgdG8gaW52YWxpZGF0ZSB0aGUgbmVlZCBmb3IgYSAg
QWJzTWF4IHNldHRpbmcuIFdpdGggTVJURyBvcGVyYXRpbmcgdGhpcyB3YXksIEkgZ3Vlc3MgSSBj
YW4ndCB0aGluayBvZiBhbnkgZ29vZCB1c2VzIGZvciBBYnhNYXggdGhlbi4gQnV0LCBzaW5jZSBJ
J20gcmVsYXRpdmx5IG5ldyBhcm91bmQgaGVyZSwgbWF5YmUgdGhlcmUncyBzb21ldGhpbmcgSSdt
IG5vdCBzZWVpbmcuDQoNCj4+IEFzIGl0IGlzLCB0aGUgb2NjYXNpb25hbCBsYXJnZSBzcGlrZXMg
ZnJvbSBmaWxlIHRyYW5zZmVycyBiZXR3ZWVuIHRoZQ0KPj4gc2VydmVyIGFuZCBsb2NhbCB3b3Jr
c3RhdGlvbnMsIGl0IGNhdXNlcyBhbGwgdHJhZmZpYyB3aGVyZSB0aGUgd2ViDQo+PiBzZXJ2ZXIg
aXMgY29tbXVuaWNhdGluZyB3aXRoIHRoZSBUMSB0byBwcmV0dHkgbXVjaCBiZSBpbnZpc2libGUg
b24gdGhlDQo+PiBncmFwaC4NCj4NCj5UaGF0cyB0aGUgcHJvYmxlbSB3aXRoIHRoaXMgdGVjaG5p
cXVlDQo+DQo+IEFueSBzdWdnZXN0aW9ucz8NCj4NCj5DcmVhdGUgdHdvIGdyYXBocy4NCj5PbmUg
d2l0aCBhIGhpZ2ggYWJzbWF4IChvciBtYXhieXRlcyksIG9uZSB3aXRoIGxvdyBtYXhieXRlcyBh
bmQgbm8gYWJzbWF4Lg0KPlRoZSBmaXJzdCB3aWxsIHNob3cgZXZlcnl0aGluZyBpbmNsdWRpbmcg
dGhlIHNwaWtlcy4gVGhlIHNlY29uZCB3aWxsIGN1dA0KPnRoZSBzcGlrZXMgb2ZmLCBhbmQgc2hv
dyB5b3UgdGhlIGxvdyBsZXZlbCBpbiBhIHJlYWRhYmxlIG1hbm5lci4NCj4NCg0KU28gdGhlbiwg
bXkgbmV4dCBxdWVzdGlvbiBpcywgd2hhdCB3aWxsIE1SVEcgZGlzcGxheSBhcyBhIHZhbHVlIGlm
IE1heEJ5dGVzIGlzIGV4Y2VlZGVkPyBXaWxsIGl0IHNpZ25hbCAwLCBsYXN0IGRhdGEsIG9yIHNl
dCB0aGUgZGF0YXBvaW50IHRvIE1heEJ5dGVzPw0KIA0KVGhhbmtzLA0KQ2hyaXN0b3BoZXINCg==

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From ccongdon at congdonweb.com  Fri Jan  2 19:46:52 2004
From: ccongdon at congdonweb.com (Christopher A. Congdon)
Date: Fri, 2 Jan 2004 13:46:52 -0500
Subject: [mrtg] Re: threshold
Message-ID: <BD034E316CA90C43AE1C43B57D36007EF00E@exchange.congdonweb.local>

Q2FuIE1SVEcgYmUgcG9pbnRlZCB0byBleGVjdXRlIGFueSBzb3J0IG9mIGV4dGVybmFsIHByb2dy
YW0gb3IganVzdCBQRVJMIHNjcmlwdHM/IFNwZWNpZmljYWxseSwgSSB3YXMgd29uZGVyaW5nIGlm
IGl0IGNvdWxkIGJlIG1hZGUgdG8gZXhlY3V0ZSBhIFZCU2NyaXB0LiBBbmQsIHVuZGVyIHdoYXQg
dXNlciB3aWxsIE1SVEcgZXhlY3V0ZSBzYWlkIGNvZGUgdW5kZXIgV2luMmszPw0KIA0KVGhhbmtz
LA0KQ2hyaXN0b3BoZXINCg0KCS0tLS0tT3JpZ2luYWwgTWVzc2FnZS0tLS0tIA0KCUZyb206IG1y
dGctYm91bmNlQGxpc3QuZWUuZXRoei5jaCBvbiBiZWhhbGYgb2YgSm9zZXBoIFBpZXJpbmkgDQoJ
U2VudDogV2VkIDEyLzMxLzIwMDMgMTo0OSBBTSANCglUbzogJ2F2aW5hc2ggcGhvZ2F0JzsgbXJ0
Z0BsaXN0LmVlLmV0aHouY2ggDQoJQ2M6IA0KCVN1YmplY3Q6IFttcnRnXSBSZTogdGhyZXNob2xk
DQoJDQoJDQoNCglodHRwOi8vcGVvcGxlLmVlLmV0aHouY2gvfm9ldGlrZXIvd2VidG9vbHMvbXJ0
Zy9yZWZlcmVuY2UuaHRtbA0KCQ0KCVRocmVzaERpcjogL3Vzci9tcnRnL3RocmVzaG9sZC8NCglU
aHJlc2hNYXhJW19dOiA4NQ0KCVRocmVzaE1pbkk6W19dOiAxMA0KCVRocmVzaFByb2dJW19dOiAv
dXNyL3NiaW4vZW1haWxtZS5wbA0KCQ0KCXVzZXJAaG9zdCBtcnRnXSQgIG1vcmUgL3Vzci9zYmlu
L2VtYWlsbWUucGwNCgkjIS91c3IvYmluL3BlcmwNCgkjIFB1cnBvc2U6IFRoaXMgc2NyaXB0IHdp
bGwgc2VuZCBhbiBlbWFpbCB3aGVuIGVpdGhlciB0aHJlc2hvbGQgdmFsdWUgaGFzDQoJYmVlbiBl
eGNlZWRlZC4uLi4uLiAgWW91IGNhbiBjaGFuZ2UgdGhlIG91dGNvbWUgdG8gYW55IGRlc2lyZWQg
ZnVuY3Rpb24uLi4NCgkoZWcuICJjYXQgL2Rldi9zbmQgL2hvbWUvaWRqaXQvc291bmRfZmlsZS53
YXYiIHRvIHBsYXkgYSBzb3VuZCkNCgkNCglvcGVuIEVNQUlMLCAiPi90bXAvbWVzc2FnZSI7DQoJ
ICAgICAgICBwcmludCBFTUFJTCAiaGVsbyBtZVxuIjsNCgkgICAgICAgIHByaW50IEVNQUlMICJv
bmV4XG4iOw0KCSAgICAgICAgcHJpbnQgRU1BSUwgIm1haWwgZnJvbTogPHVzZXJcQGhvc3QuY29t
PlxuIjsNCgkgICAgICAgIHByaW50IEVNQUlMICJyY3B0IHRvOiA8ZGF2ZVxAaG9zdC5jb20+XG4i
Ow0KCSAgICAgICAgcHJpbnQgRU1BSUwgInJjcHQgdG86IDxib2JcQGhvc3QuY29tPlxuIjsNCgkg
ICAgICAgIHByaW50IEVNQUlMICJkYXRhXG4iOw0KCSAgICAgICAgcHJpbnQgRU1BSUwgInN1Ympl
Y3Q6ICBUaHJlc2hvbGQgRXhjZWVkZWQgYmxhaCBibGFoIGJsYWgiOw0KCXByaW50IEVNQUlMICIu
XG4iOw0KCXByaW50IEVNQUlMICJxdWl0XG4iOw0KCWNsb3NlIEVNQUlMOw0KCXNsZWVwIDU7DQoJ
YC91c3IvbGliL3NlbmRtYWlsIC1icyA8IC90bXAvbWVzc2FnZWA7DQoJDQoJR29vZCBMdWNrIQ0K
CQ0KCUpTUA0KCQ0KCS0tLS0tT3JpZ2luYWwgTWVzc2FnZS0tLS0tDQoJRnJvbTogYXZpbmFzaCBw
aG9nYXQgW21haWx0bzphdmluYXNoX3Bob2dhdEBob3RtYWlsLmNvbV0NCglTZW50OiBUdWVzZGF5
LCBEZWNlbWJlciAzMCwgMjAwMyA5OjU4IFBNDQoJVG86IG1ydGdAbGlzdC5lZS5ldGh6LmNoDQoJ
U3ViamVjdDogW21ydGddIHRocmVzaG9sZA0KCQ0KCQ0KCUhpIQ0KCQ0KCURvZXMgYW55Ym9keSB1
c2UgTVJURyBUaHJlc2hvbGQgQ2hlY2tpbmc/DQoJSSB3YW50IHRvIHJlY2VpdmUgYW4gZS1tYWls
IHdoZW5ldmVyDQoJdGhyZXNob2xkIHZhbHVlIGlzIGFjaGlldmVkLmNhbiBhbnlvbmUgcHJvdmlk
ZSBtZSBzY3JpcHQgZm9yIGEgbGludXgNCglwbGF0Zm9ybSBmb3IgbXJ0ZyB0aHJlc2hvbGQNCgkN
Cgl0aGFua3MgaW4gYWR2YW5jZQ0KCQ0KCUF2aW5hc2ggUGhvZ2F0DQoJDQoJX19fX19fX19fX19f
X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX18NCglG
cmVlIHRyYW5zYWN0aW9ucyBpbiBhbnkgQVRNIGFjcm9zcyBJbmRpYS4NCglodHRwOi8vc2VydmVy
MS5tc24uY28uaW4vbXNubGVhZHMvc3V2aWRoYS9kZWMwMy5hc3A/dHlwZT1ob3R0YWcgQ2xpY2sg
aGVyZS4NCgkNCgktLQ0KCVVuc3Vic2NyaWJlIG1haWx0bzptcnRnLXJlcXVlc3RAbGlzdC5lZS5l
dGh6LmNoP3N1YmplY3Q9dW5zdWJzY3JpYmUNCglBcmNoaXZlICAgICBodHRwOi8vd3d3LmVlLmV0
aHouY2gvfnNsaXN0L21ydGcNCglGQVEgICAgICAgICBodHRwOi8vZmFxLm1ydGcub3JnICAgIEhv
bWVwYWdlICAgICBodHRwOi8vd3d3Lm1ydGcub3JnDQoJV2ViQWRtaW4gICAgaHR0cDovL3d3dy5l
ZS5ldGh6LmNoL35zbGlzdC9sc2cyLmNnaQ0KCQ0KCS0tDQoJVW5zdWJzY3JpYmUgbWFpbHRvOm1y
dGctcmVxdWVzdEBsaXN0LmVlLmV0aHouY2g/c3ViamVjdD11bnN1YnNjcmliZQ0KCUFyY2hpdmUg
ICAgIGh0dHA6Ly93d3cuZWUuZXRoei5jaC9+c2xpc3QvbXJ0Zw0KCUZBUSAgICAgICAgIGh0dHA6
Ly9mYXEubXJ0Zy5vcmcgICAgSG9tZXBhZ2UgICAgIGh0dHA6Ly93d3cubXJ0Zy5vcmcNCglXZWJB
ZG1pbiAgICBodHRwOi8vd3d3LmVlLmV0aHouY2gvfnNsaXN0L2xzZzIuY2dpDQoJDQoJDQoNCg==

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From frankd at iaw.on.ca  Fri Jan  2 22:31:56 2004
From: frankd at iaw.on.ca (Frank DeChellis)
Date: Fri, 2 Jan 2004 16:31:56 -0500
Subject: [mrtg] SNMPv2 with MRTG 2.10.11
Message-ID: <NEBBLHKFIKHLKPNHEDBOIEGHBAAB.frankd@iaw.on.ca>

Hi.

Happy New Year to All from Canada.

I have devices that use SNMPv2.  With mrtgcfgmaker I used the
option --snmp-options=:::::2 to get the device config into the file
mrtg.conf.

But when I run mrtg mrtg.conf I get an error because it's using SNMPv1.  I
have been unable to find where in the mrtg.conf or mrtg comment line I tell
it to use SNMPv2.

Can anybody offer me some direction?

Thanks you.

Frank

---------------------------------------------
Frank DeChellis, President
Internet Access Worldwide
3 East Main St.  Welland, ON, Canada L3B 3W4
1-905-714-1400   http://www.iaw.com
---------------------------------------------


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From frankd at iaw.on.ca  Sat Jan  3 01:49:54 2004
From: frankd at iaw.on.ca (Frank DeChellis)
Date: Fri, 2 Jan 2004 19:49:54 -0500
Subject: [mrtg] Re: SNMPv2 with MRTG 2.10.11 (extra info)
In-Reply-To: <NEBBLHKFIKHLKPNHEDBOMEHBBAAB.frankd@iaw.on.ca>
Message-ID: <NEBBLHKFIKHLKPNHEDBOIEHCBAAB.frankd@iaw.on.ca>

Hi Again,

I guess what I need is to know how to add :::::2 to the end of 
this line in my .cfg file

Target[10.0.0.20_2]: 2:Canopy at 10.0.0.20
 
Like I said, I got how to create the device cfg file with snmp2 
but I can't get it to run unless I manually edit the cfg file, 
which is a pain with 50 something devices.
 
Thanks
Frank
 
Behalf Of Frank DeChellis
Sent: Friday, January 02, 2004 4:32 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] SNMPv2 with MRTG 2.10.11
 
 
 Hi.
 
> > Happy New Year to All from Canada.
> > 
> > I have devices that use SNMPv2.  With mrtgcfgmaker I used the
> > option --snmp-options=:::::2 to get the device config into the file
> > mrtg.conf.
> > 
> > But when I run mrtg mrtg.conf I get an error because it's using 
> SNMPv1.  I
> > have been unable to find where in the mrtg.conf or mrtg comment 
> > line I tell
> > it to use SNMPv2.
> > 
> > Can anybody offer me some direction?
> > 
> > 
> > --
> > Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> > Archive     http://www.ee.ethz.ch/~slist/mrtg
> > FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> > WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> > 
> > 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From exquo at mail.ru  Sat Jan  3 10:58:27 2004
From: exquo at mail.ru (Darius Povilaitis)
Date: Sat, 3 Jan 2004 11:58:27 +0200
Subject: [mrtg] IP problem
Message-ID: <1232196578.20040103115827@mail.ru>

Hi,

i'm having a progmel making mrtg.cfg...

darius:~# /usr/bin/cfgmaker public@$1 --global "workdir: /home/mrtg/public_html/$1 " --output /etc/mrtg/$1.cfg
--base: Get Device Info on public at public@:
Error:
  can't resolve "" to IP address
 at /usr/share/perl5/SNMP_util.pm line 423
SNMPWALK Problem for public at public@:
 at /usr/bin/cfgmaker line 712

what could be the problem, and how to solve it?
i have 2 LAN cards in server, one is functional, other is even not
configured..


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From yamtak at b-session.com  Sat Jan  3 14:14:15 2004
From: yamtak at b-session.com (Takumi Yamane)
Date: Sat, 03 Jan 2004 22:14:15 +0900
Subject: [mrtg] Re: IP problem
In-Reply-To: <1232196578.20040103115827@mail.ru>
References: <1232196578.20040103115827@mail.ru>
Message-ID: <20040103131422.C574BD96F1@ntardis.ee.ethz.ch>


> darius:~# /usr/bin/cfgmaker public@$1 --global "workdir: /home/mrtg/
> public_html/$1 " --output /etc/mrtg/$1.cfg
> --base: Get Device Info on public at public@:
> Error:
>   can't resolve "" to IP address
... snip ...

how about this?

IP=what.ever.your.agents.ip \
/usr/bin/cfgmaker public@$IP \
  --global "workdir: /home/mrtg/public_html/$IP" \
  --output /etc/mrtg/$IP.cfg


>what could be the problem, and how to solve it?

there is no problem if you do know what '$1' means.


Takumi Yamane <yamtak at b-session.com>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From list at weben.nu  Sat Jan  3 16:37:40 2004
From: list at weben.nu (Lennie)
Date: Sat, 3 Jan 2004 16:37:40 +0100
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows 2000 server
References: <4C558BF864410C4FA00F8458F4A2F3FC3BAF@dell2003.limecity.local>
Message-ID: <006b01c3d20f$eb54a000$1701a8c0@phonera.local>

Yes.
if i am using Getif i can walk the oid .1.3.6.1.4.1.9600.1.1.5.1.5.1
the error messages i get from mrtg is
<---->
C:\Program Files\mrtg\bin>perl mrtg cpu.cfg
Daemonizing MRTG ...
Do Not close this window. Or MRTG will die
ERROR: Target[blofeld.cpu][_IN_] '.1.3.6.1.4.1.9600.1.1.5.1.5.
$target->[1]{$mod
e} ' evaluated to ' ??????G???????656' instead of a number
ERROR: Target[blofeld.cpu][_OUT_] '.1.3.6.1.4.1.9600.1.1.5.1.5.
$target->[1]{$mo
de} ' evaluated to ' ??????G???????656' instead of a number
Use of uninitialized value in numeric lt (<) at mrtg line 371.
Use of uninitialized value in numeric lt (<) at mrtg line 375.
<---->
i am running mrtg on a windows 2003 server.
and the computer i am trying to access is a windwos 2000 server.

// Lennie


----- Original Message ----- 
From: "Joe Wixted" <jwixted at limecity.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Friday, January 02, 2004 4:28 PM
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server


> Have you been able to walk that oid with GetIF or some other SNMP tool?
>
> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Lennie
> Sent: Friday, January 02, 2004 10:27 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows 2000 server
>
> So.. now i have downloaded and installed the Free version of SNMP2CA.
> but i still dont get it to work.
> it?s that anything wrong whit this line ??
>
> Target[blofeld.CPU]: 1.3.6.1.4.1.9600.1.1.5.1.5:phonera at 192.168.1.50
>
> it is stil teling me that: noSuchName
>
> // Lennie
>
>
>
>
> ----- Original Message ----- 
> From: "William Owen" <William.Owen at ProfilesInternational.com>
> To: "'Alex van den Bogaerdt'" <alex at ergens.op.het.net>;
> <mrtg at list.ee.ethz.ch>
> Sent: Friday, January 02, 2004 2:46 PM
> Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows
> 2000 server
>
>
> > Win2k has a tendency to change the instance numbers of your Processors
> when
> > reboots occur.  I would recommend using the Free version of SNMP2CA
> > (http://www.snmp4tpc.com/snmp2ca.htm).  It will add the 1.3.6.1.4.1.9600
> > branch to a Win2k, Win2k3 or XP machine that won't change.  It also
allows
> > you to standardize your config files between the two.
> >
> > -----Original Message-----
> > From: Alex van den Bogaerdt [mailto:alex at ergens.op.het.net]
> > Sent: Friday, January 02, 2004 7:19 AM
> > To: mrtg at list.ee.ethz.ch
> > Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
> windows
> > 2000 server
> >
> > On Fri, Jan 02, 2004 at 02:03:06PM +0100, Lennie wrote:
> > > I have a problem whit my mrtg config file.
> > > i am monitoring 2 computer.
> > > one windows 2003 server
> > > and one windows 2000 server.
> > > when i am monitoring the CPU on the windows 20003 server everthings
> works
> > perfekt.
> > > but. when i am using the some settings for the windows 2000 server. i
> get
> > a lots of error messages.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From amolsapkal at coolgoose.com  Sun Jan  4 14:05:58 2004
From: amolsapkal at coolgoose.com (Amol Sapkal)
Date: Sun, 4 Jan 2004 18:55:58 +0550
Subject: [mrtg] Re: IP problem
Message-ID: <1073222758.364940029@as03.coolgoose.com>


> Hi,
> 
> i'm having a progmel making mrtg.cfg...
> 
> darius:~# /usr/bin/cfgmaker public@$1 --global "workdir:
> /home/mrtg/public_html/$1 " --output /etc/mrtg/$1.cfg
> --base: Get Device Info on public at public@:
> Error:
>   can't resolve "" to IP address
>  at /usr/share/perl5/SNMP_util.pm line 423
> SNMPWALK Problem for public at public@:
>  at /usr/bin/cfgmaker line 712

Is the above text part of a shell script? If yes, pls check the value being assigned to $1.

> 
> what could be the problem, and how to solve it?
> i have 2 LAN cards in server, one is functional, other is even not
> configured..

Nothing to do with your LAN card.


Regds,
Amol Sapkal


> 
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From ziltener at netcloud.ch  Sun Jan  4 19:27:53 2004
From: ziltener at netcloud.ch (Oliver Ziltener)
Date: Sun, 4 Jan 2004 19:27:53 +0100
Subject: [mrtg] Legend3 and Legend4
Message-ID: <30DD45D78A55004C8B543CD7B65C914530E9D7@ncwts003.ncg.ch>

Hello

can anybody explain me, for what this two legends are?

Oliver

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From pwilliamson at mandtbank.com  Sun Jan  4 19:54:52 2004
From: pwilliamson at mandtbank.com (PAUL WILLIAMSON)
Date: Sun, 04 Jan 2004 13:54:52 -0500
Subject: [mrtg] Re: Legend3 and Legend4
Message-ID: <sff81b31.036@mandtbank.com>

>>> "Oliver Ziltener" <ziltener at netcloud.ch> 01/04/04 01:27PM >>>
>Hello
>
>can anybody explain me, for what this two legends are?
>
>Oliver
>

Legend3 and Legend4 are the MAX descriptions for whatever Legend1 and 
Legend2 are.

Paul

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From grimm at nickellson.com  Mon Jan  5 03:39:54 2004
From: grimm at nickellson.com (Nickolas Ray Ellson)
Date: Sun, 4 Jan 2004 18:39:54 -0800 (PST)
Subject: [mrtg] MRTG 2.10.6 and Perl 5.8.2 possible fork errors?
Message-ID: <Pine.LNX.4.58.0401041833350.20696@goonie.nickellson.com>


When I try to start MRTG with a config file that specifies "Forks: 8" I 
get

Use of uninitialized value in vec at /usr/bin/mrtg line 2040.
Use of uninitialized value in vec at /usr/bin/mrtg line 2043.

I saw this in a google search as being an issue with perl 5.6  but I have 
5.8 (emerged on Gentoo Linux). 

Is there something about the building of perl I need to do to get my 
forking back?

Nick

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From tvdias at charter.net  Mon Jan  5 04:01:09 2004
From: tvdias at charter.net (Vern Dias)
Date: Sun, 4 Jan 2004 21:01:09 -0600
Subject: [mrtg] Re: MRTG 2.10.6 and Perl 5.8.2 possible fork errors?
References: <Pine.LNX.4.58.0401041833350.20696@goonie.nickellson.com>
Message-ID: <000c01c3d338$2b7568d0$c80044c0@info24h2>

Nickolas Ray Ellson wrote:

> When I try to start MRTG with a config file that specifies "Forks: 8" I 
> get
> 
> Use of uninitialized value in vec at /usr/bin/mrtg line 2040.
> Use of uninitialized value in vec at /usr/bin/mrtg line 2043.

You can always revert to MRTG 2.10.5 until this issue gets fixed.

That is the newest release I could get to run with Perl 5.8.1 that
worked with the Forks: option.

Vern Dias

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From grimm at nickellson.com  Mon Jan  5 06:22:17 2004
From: grimm at nickellson.com (Nickolas Ray Ellson)
Date: Sun, 4 Jan 2004 21:22:17 -0800 (PST)
Subject: [mrtg] Forks still an issue in MTG 2.10.11??
In-Reply-To: <Pine.LNX.4.58.0401041833350.20696@goonie.nickellson.com>
References: <Pine.LNX.4.58.0401041833350.20696@goonie.nickellson.com>
Message-ID: <Pine.LNX.4.58.0401042120290.15371@goonie.nickellson.com>


Ok, I have tested a bit and found that I only get this eror below (on 
every device and every port) when Forks: 8 is in my base config.

ERROR: Target[10.0.0.11_fastethernet0_18][_IN_] ' $target->[XXXX]{$mode} ' 
did not eval into defined data

I take out the Forks: 8 

and it all runs fine.

I am on Gentoo Linux with Perl 5.8.2, mrtg 2.10.11.

Any ideas?

Nick


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From avinash_phogat at hotmail.com  Mon Jan  5 09:04:59 2004
From: avinash_phogat at hotmail.com (avinash phogat)
Date: Mon, 05 Jan 2004 13:34:59 +0530
Subject: [mrtg] threshold forking/spawning
Message-ID: <BAY2-F13YDlHYLKLhz500035855@hotmail.com>

Hi all

I am facing problem in seeting threshold for mrtg , i am using redhat7.2 and 
mrtg version is 2.9.29

I think i am facing problem in forking/spawning part of the process.

my script is as under
begin script>

#!/usr/bin/perl
# file thresh.pl
use Mail::Internet;

my($timestr, $param, $thresh, $value, $logfile, $now, $result, $in_name,
$link_name);
  $timestr = localtime(time);
  $param = $ARGV[0];
  $thresh = $ARGV[1];
  $value = $ARGV[2];
  $thdesc = $ENV{'THRESH_DESC'};
  $logfile = "/home/www/mrtg/threshold/thresh.sh";
  $now = `date`;
  $result = $value * 8 / 1024;


my $head = Mail::Header->new;
$head->add(From => 'ThreshMAN <avinash_phogat at hotmail.com>');
$head->add(ReplyTo => 'Netgroups <avinash_phogat at hotmail.com>');
$head->add(To   => 'Netgroups <avinash_phogat at hotmail.com>');
$head->add(Subject => "THRESHOLD ALERT:  $thdesc ($param) is above $thresh
bandwidth threshold");

my $body = <<END;
Device          : $thdesc ($param)
Threshold Value : $thresh
Current Value   : $result kbps
Date/Time       : $now

$mail = Mail::Internet->new(Header => $head,
                            Body   => [$body],
                            Modify => 1);

# Mail it.
if ($thdesc !~ /(thernet)/) { print $mail->send('sendmail'); }

# Log it.
if ($thresh > $value) { $abovebelow = "below"; }
                 else { $abovebelow = "above"; }

$message .= "$thdesc ($param) ($result kbps) is $abovebelow threshold
($thresh)";

open(LOG, ">>$logfile");
print LOG "$timestr $message\n";
close(LOG);


exit(0);
pls suggest me what shall i do
pls do the needful
thanks in advance
Avinash

_________________________________________________________________
Free transactions in any ATM across India. 
http://server1.msn.co.in/msnleads/suvidha/dec03.asp?type=hottag Click here.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From list at weben.nu  Mon Jan  5 13:33:37 2004
From: list at weben.nu (Lennie)
Date: Mon, 5 Jan 2004 13:33:37 +0100
Subject: [mrtg] Fw: Re: Problem whit CPU monitoring on windows 2003 and windows 2000 server
Message-ID: <004401c3d388$4c22ade0$1701a8c0@phonera.local>

Hello

i am using perl version:
<---->
This is perl, v5.8.2 built for MSWin32-x86-multi-thread
(with 25 registered patches, see perl -V for more detail)

Copyright 1987-2003, Larry Wall

Binary build 808 provided by ActiveState Corp. http://www.ActiveState.com
ActiveState is a division of Sophos.
Built Dec  9 2003 10:19:40
<------>
And the MRTG is version: 2.10.11

If you want. can you plise send you config file to me.
so that i can se that target you are using.
if you dont want to send it to the list. you can send it privat to me att:
lennie at weben.nu

// Lennie


----- Original Message ----- 
From: "William Owen" <William.Owen at ProfilesInternational.com>
To: "'Lennie'" <list at weben.nu>
Sent: Saturday, January 03, 2004 6:04 PM
Subject: RE: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows 2000 server


What version of Perl/MRTG are you using?  I've heard of some strange thing
happening using an older version of Perl and a newer version of MRTG.  I
have a configuration of 2003 server running Perl 5.8.0.806 and MRTG 2.10.5
monitoring Win2k Pro/Server, Win2k3 Server and XP Pro/Home.

-----Original Message-----
From: Lennie [mailto:list at weben.nu]
Sent: Saturday, January 03, 2004 9:38 AM
To: Joe Wixted; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server

Yes.
if i am using Getif i can walk the oid .1.3.6.1.4.1.9600.1.1.5.1.5.1
the error messages i get from mrtg is
<---->
C:\Program Files\mrtg\bin>perl mrtg cpu.cfg
Daemonizing MRTG ...
Do Not close this window. Or MRTG will die
ERROR: Target[blofeld.cpu][_IN_] '.1.3.6.1.4.1.9600.1.1.5.1.5.
$target->[1]{$mod
e} ' evaluated to ' ??????G???????656' instead of a number
ERROR: Target[blofeld.cpu][_OUT_] '.1.3.6.1.4.1.9600.1.1.5.1.5.
$target->[1]{$mo
de} ' evaluated to ' ??????G???????656' instead of a number
Use of uninitialized value in numeric lt (<) at mrtg line 371.
Use of uninitialized value in numeric lt (<) at mrtg line 375.
<---->
i am running mrtg on a windows 2003 server.
and the computer i am trying to access is a windwos 2000 server.

// Lennie


----- Original Message ----- 
From: "Joe Wixted" <jwixted at limecity.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Friday, January 02, 2004 4:28 PM
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server


> Have you been able to walk that oid with GetIF or some other SNMP tool?
>
> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Lennie
> Sent: Friday, January 02, 2004 10:27 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows 2000 server
>
> So.. now i have downloaded and installed the Free version of SNMP2CA.
> but i still dont get it to work.
> it?s that anything wrong whit this line ??
>
> Target[blofeld.CPU]: 1.3.6.1.4.1.9600.1.1.5.1.5:phonera at 192.168.1.50
>
> it is stil teling me that: noSuchName
>
> // Lennie
>
>
>
>
> ----- Original Message ----- 
> From: "William Owen" <William.Owen at ProfilesInternational.com>
> To: "'Alex van den Bogaerdt'" <alex at ergens.op.het.net>;
> <mrtg at list.ee.ethz.ch>
> Sent: Friday, January 02, 2004 2:46 PM
> Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows
> 2000 server
>
>
> > Win2k has a tendency to change the instance numbers of your Processors
> when
> > reboots occur.  I would recommend using the Free version of SNMP2CA
> > (http://www.snmp4tpc.com/snmp2ca.htm).  It will add the 1.3.6.1.4.1.9600
> > branch to a Win2k, Win2k3 or XP machine that won't change.  It also
allows
> > you to standardize your config files between the two.
> >
> > -----Original Message-----
> > From: Alex van den Bogaerdt [mailto:alex at ergens.op.het.net]
> > Sent: Friday, January 02, 2004 7:19 AM
> > To: mrtg at list.ee.ethz.ch
> > Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
> windows
> > 2000 server
> >
> > On Fri, Jan 02, 2004 at 02:03:06PM +0100, Lennie wrote:
> > > I have a problem whit my mrtg config file.
> > > i am monitoring 2 computer.
> > > one windows 2003 server
> > > and one windows 2000 server.
> > > when i am monitoring the CPU on the windows 20003 server everthings
> works
> > perfekt.
> > > but. when i am using the some settings for the windows 2000 server. i
> get
> > a lots of error messages.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From ccongdon at congdonweb.com  Mon Jan  5 15:39:41 2004
From: ccongdon at congdonweb.com (Christopher A. Congdon)
Date: Mon, 5 Jan 2004 09:39:41 -0500
Subject: [mrtg] Re: threshold
Message-ID: <BD034E316CA90C43AE1C43B57D36007E046ED3@exchange.congdonweb.local>

OK, I have no idea why the last message I sent to the list looked like
code... So I'll try again.

Is program triggering from MRTG limited to Perl scripts, or could any
external program be run? Specifically I was thinking of VBScript through
WSH.

Christopher Congdon
Network Engineer
Congdon.WEB
ccongdon at congdonweb.com
http://www.congdonweb.com
317-920-9601


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Joseph Pierini
Sent: Wednesday, December 31, 2003 01:50
To: 'avinash phogat'; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: threshold

http://people.ee.ethz.ch/~oetiker/webtools/mrtg/reference.html

ThreshDir: /usr/mrtg/threshold/
ThreshMaxI[_]: 85
ThreshMinI:[_]: 10
ThreshProgI[_]: /usr/sbin/emailme.pl

user at host mrtg]$  more /usr/sbin/emailme.pl
#!/usr/bin/perl
# Purpose: This script will send an email when either threshold value
has
been exceeded......  You can change the outcome to any desired
function...
(eg. "cat /dev/snd /home/idjit/sound_file.wav" to play a sound)

open EMAIL, ">/tmp/message";
        print EMAIL "helo me\n";
        print EMAIL "onex\n";
        print EMAIL "mail from: <user\@host.com>\n";
        print EMAIL "rcpt to: <dave\@host.com>\n";
        print EMAIL "rcpt to: <bob\@host.com>\n";
        print EMAIL "data\n";
        print EMAIL "subject:  Threshold Exceeded blah blah blah";
print EMAIL ".\n";
print EMAIL "quit\n";
close EMAIL;
sleep 5;
`/usr/lib/sendmail -bs < /tmp/message`;

Good Luck!

JSP

-----Original Message-----
From: avinash phogat [mailto:avinash_phogat at hotmail.com] 
Sent: Tuesday, December 30, 2003 9:58 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] threshold


Hi!

Does anybody use MRTG Threshold Checking?
I want to receive an e-mail whenever
threshold value is achieved.can anyone provide me script for a linux 
platform for mrtg threshold

thanks in advance

Avinash Phogat

_________________________________________________________________
Free transactions in any ATM across India. 
http://server1.msn.co.in/msnleads/suvidha/dec03.asp?type=hottag Click
here.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From aortega at univ-wea.com  Mon Jan  5 16:13:56 2004
From: aortega at univ-wea.com (Manny Ortega)
Date: Mon, 5 Jan 2004 09:13:56 -0600 
Subject: [mrtg] Re: threshold
Message-ID: <69D72311B46FD4119EF100D0B77CF7DA0855DE8F@lightning.univ-wea.com>

I think that if you can run the program from the command line, MRTG will do
it.
I run it on windows and run batch and cmd files with no problems.

-MannyO

-----Original Message-----
From: Christopher A. Congdon [mailto:ccongdon at congdonweb.com]
Sent: Monday, January 05, 2004 8:40 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: threshold


OK, I have no idea why the last message I sent to the list looked like
code... So I'll try again.

Is program triggering from MRTG limited to Perl scripts, or could any
external program be run? Specifically I was thinking of VBScript through
WSH.

Christopher Congdon
Network Engineer
Congdon.WEB
ccongdon at congdonweb.com
http://www.congdonweb.com
317-920-9601


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Joseph Pierini
Sent: Wednesday, December 31, 2003 01:50
To: 'avinash phogat'; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: threshold

http://people.ee.ethz.ch/~oetiker/webtools/mrtg/reference.html

ThreshDir: /usr/mrtg/threshold/
ThreshMaxI[_]: 85
ThreshMinI:[_]: 10
ThreshProgI[_]: /usr/sbin/emailme.pl

user at host mrtg]$  more /usr/sbin/emailme.pl
#!/usr/bin/perl
# Purpose: This script will send an email when either threshold value
has
been exceeded......  You can change the outcome to any desired
function...
(eg. "cat /dev/snd /home/idjit/sound_file.wav" to play a sound)

open EMAIL, ">/tmp/message";
        print EMAIL "helo me\n";
        print EMAIL "onex\n";
        print EMAIL "mail from: <user\@host.com>\n";
        print EMAIL "rcpt to: <dave\@host.com>\n";
        print EMAIL "rcpt to: <bob\@host.com>\n";
        print EMAIL "data\n";
        print EMAIL "subject:  Threshold Exceeded blah blah blah";
print EMAIL ".\n";
print EMAIL "quit\n";
close EMAIL;
sleep 5;
`/usr/lib/sendmail -bs < /tmp/message`;

Good Luck!

JSP

-----Original Message-----
From: avinash phogat [mailto:avinash_phogat at hotmail.com] 
Sent: Tuesday, December 30, 2003 9:58 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] threshold


Hi!

Does anybody use MRTG Threshold Checking?
I want to receive an e-mail whenever
threshold value is achieved.can anyone provide me script for a linux 
platform for mrtg threshold

thanks in advance

Avinash Phogat

_________________________________________________________________
Free transactions in any ATM across India. 
http://server1.msn.co.in/msnleads/suvidha/dec03.asp?type=hottag Click
here.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From CihanS at garanti.com.tr  Mon Jan  5 16:57:51 2004
From: CihanS at garanti.com.tr (Cihan Subasi (Garanti Teknoloji))
Date: Mon, 5 Jan 2004 17:57:51 +0200
Subject: [mrtg] SNMPv2c and MRTG 2.10.11
Message-ID: <5FA6F2E719F6C04FAD76837E84929C340638BF1B@gtiexc5.fw.teknoloji.com.tr>


When I run mrtgcfg with and option unknaszero I am getting zigzags on my graphs, but removing the option unknaszero corrects my graphs (or looks that way but still mrtg gets null values and uses the last correct value..I tried to poll my routers with v2, in this case I am getting following error on the server. anybody can help me with that? Could this be because of my perl version whihc is very old 5.005_03....thanks

#mrtg $MRTGCFG/demo.cfg                               
ERROR: Target[demo1][_IN_] ' $target->[0]{$mode} ' did not eval into defined data
ERROR: Target[demo1][_OUT_] ' $target->[0]{$mode} ' did not eval into defined data
Use of uninitialized value at /export/home/mrtg-2.10.11/bin/mrtg line 371.
Use of uninitialized value at /export/home/mrtg-2.10.11/bin/mrtg line 375.
 /export/home/MRTG/osa

***********************************************************
Cihan SUBASI
Garanti Technology
Internet ve Yazilim Hizmetleri
Tel:(90)(212)4783426 GSM:(90)(533)(2750353)
Fax:(90)(212)6576150
http://www.garantitechnology.com <http://www.garantitechnology.com/>
mailto:cihans at garanti.com.tr
Success is a wonderful thing, but never underestimate the value of failure.
Failure teaches many more things than success ever can.
***********************************************************




This message and attachments are confidential and intended solely for the individual(s) stated in this
message.If you received this message although you are not the addressee you are responsible to keep the
message confidential .The sender has no responsibility for the accuracy or correctness of the
information in the message and its attachments.Our company shall have no liability for any changes
or late receiving,loss of integrity and confidentiality,viruses and any damages caused in
anyway to your computer system.

Bu mesaj ve ekleri mesajda gonderildigi belirtilen kisi/kisilere ozeldir ve gizlidir.Bu mesajin muhatabi
olmamaniza ragmen tarafiniza ulasmis olmasi halinde mesaj iceriginin gizliligi ve bu gizlilik yukumlulugune
uyulmasi zorunlulugu tarafiniz icin de soz konusudur.Mesaj ve eklerinde yer alan bilgilerin dogrulugu ve
guncelligi konusunda gonderenin ya da sirketimizin herhangi bir sorumlulugu bulunmamaktadir.Sirketimiz
mesajin ve bilgilerinin size degisiklige ugrayarak veya gec ulasmasindan, butunlugunun ve gizliliginin
korunamamasindan, virus icermesinden ve bilgisayar sisteminize verebilecegi herhangi bir zarardan
sorumlu tutulamaz.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From rsutton at centra.com  Mon Jan  5 21:56:14 2004
From: rsutton at centra.com (Sutton, Rob)
Date: Mon, 5 Jan 2004 15:56:14 -0500 
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and wi
	ndows 2000 server
Message-ID: <9B46CC0C7C48D51182AC00508BC773180152BBF4@raleigh01.centra.com>

I use WMI along with MRTG and VBScripts. Here is the VBScript I use to call
with MRTG and the MRTG Config file...

VBScript call to WMI:

On Error Resume Next
Set objArgs = WScript.Arguments
strComputer = objArgs.item(0)
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_Processor",,48)
For Each objItem in colItems
    Wscript.Echo "" & objItem.LoadPercentage
    Wscript.Echo "" & objItem.LoadPercentage
Next


MRTG cfg:

Target[SERVERNAME.processorLoad]: `cscript //nologo
D:\mrtg\bin\VB_Scripts\CPULoadSP.vbs SERVER NETBIOS NAME HERE`

I monitor just over 100 Windows 2000 and 2003 server this way. I had tons of
issues with SNMP and Windows and found this to be the best way to monitor
Windows servers. WMI RULES! Get Scriptomatic from Microsoft as well. It's a
free WMI scripting tool. All of the counters you get in Performance Monitor
are available through WMI. I monitor my MS SQL and IIS Counters through WMI
as well.

Good Luck! 

----->MRTG Knowledge Transfer (MRTGKT.COM) will be back online shortly<----



-----Original Message-----
From: Lennie [mailto:list at weben.nu] 
Sent: Saturday, January 03, 2004 10:38 AM
To: Joe Wixted; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server

Yes.
if i am using Getif i can walk the oid .1.3.6.1.4.1.9600.1.1.5.1.5.1
the error messages i get from mrtg is
<---->
C:\Program Files\mrtg\bin>perl mrtg cpu.cfg
Daemonizing MRTG ...
Do Not close this window. Or MRTG will die
ERROR: Target[blofeld.cpu][_IN_] '.1.3.6.1.4.1.9600.1.1.5.1.5.
$target->[1]{$mod
e} ' evaluated to ' ??????G???????656' instead of a number
ERROR: Target[blofeld.cpu][_OUT_] '.1.3.6.1.4.1.9600.1.1.5.1.5.
$target->[1]{$mo
de} ' evaluated to ' ??????G???????656' instead of a number
Use of uninitialized value in numeric lt (<) at mrtg line 371.
Use of uninitialized value in numeric lt (<) at mrtg line 375.
<---->
i am running mrtg on a windows 2003 server.
and the computer i am trying to access is a windwos 2000 server.

// Lennie


----- Original Message ----- 
From: "Joe Wixted" <jwixted at limecity.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Friday, January 02, 2004 4:28 PM
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server


> Have you been able to walk that oid with GetIF or some other SNMP tool?
>
> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Lennie
> Sent: Friday, January 02, 2004 10:27 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows 2000 server
>
> So.. now i have downloaded and installed the Free version of SNMP2CA.
> but i still dont get it to work.
> it?s that anything wrong whit this line ??
>
> Target[blofeld.CPU]: 1.3.6.1.4.1.9600.1.1.5.1.5:phonera at 192.168.1.50
>
> it is stil teling me that: noSuchName
>
> // Lennie
>
>
>
>
> ----- Original Message ----- 
> From: "William Owen" <William.Owen at ProfilesInternational.com>
> To: "'Alex van den Bogaerdt'" <alex at ergens.op.het.net>;
> <mrtg at list.ee.ethz.ch>
> Sent: Friday, January 02, 2004 2:46 PM
> Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows
> 2000 server
>
>
> > Win2k has a tendency to change the instance numbers of your Processors
> when
> > reboots occur.  I would recommend using the Free version of SNMP2CA
> > (http://www.snmp4tpc.com/snmp2ca.htm).  It will add the 1.3.6.1.4.1.9600
> > branch to a Win2k, Win2k3 or XP machine that won't change.  It also
allows
> > you to standardize your config files between the two.
> >
> > -----Original Message-----
> > From: Alex van den Bogaerdt [mailto:alex at ergens.op.het.net]
> > Sent: Friday, January 02, 2004 7:19 AM
> > To: mrtg at list.ee.ethz.ch
> > Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
> windows
> > 2000 server
> >
> > On Fri, Jan 02, 2004 at 02:03:06PM +0100, Lennie wrote:
> > > I have a problem whit my mrtg config file.
> > > i am monitoring 2 computer.
> > > one windows 2003 server
> > > and one windows 2000 server.
> > > when i am monitoring the CPU on the windows 20003 server everthings
> works
> > perfekt.
> > > but. when i am using the some settings for the windows 2000 server. i
> get
> > a lots of error messages.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From rsutton at centra.com  Mon Jan  5 21:57:32 2004
From: rsutton at centra.com (Sutton, Rob)
Date: Mon, 5 Jan 2004 15:57:32 -0500 
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and wi
	ndows 2000 server
Message-ID: <9B46CC0C7C48D51182AC00508BC773180152BBF5@raleigh01.centra.com>

I use WMI along with MRTG and VBScripts. Here is the VBScript I use to call
with MRTG and the MRTG Config file...

VBScript call to WMI:

On Error Resume Next
Set objArgs = WScript.Arguments
strComputer = objArgs.item(0)
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_Processor",,48)
For Each objItem in colItems
    Wscript.Echo "" & objItem.LoadPercentage
    Wscript.Echo "" & objItem.LoadPercentage
Next


MRTG cfg:

Target[SERVERNAME.processorLoad]: `cscript //nologo
D:\mrtg\bin\VB_Scripts\CPULoadSP.vbs SERVER NETBIOS NAME HERE`

I monitor just over 100 Windows 2000 and 2003 server this way. I had tons of
issues with SNMP and Windows and found this to be the best way to monitor
Windows servers. WMI RULES! Get Scriptomatic from Microsoft as well. It's a
free WMI scripting tool. All of the counters you get in Performance Monitor
are available through WMI. I monitor my MS SQL and IIS Counters through WMI
as well.

Good Luck! 

----->MRTG Knowledge Transfer (MRTGKT.COM) will be back online shortly<----



-----Original Message-----
From: Lennie [mailto:list at weben.nu] 
Sent: Saturday, January 03, 2004 10:38 AM
To: Joe Wixted; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server

Yes.
if i am using Getif i can walk the oid .1.3.6.1.4.1.9600.1.1.5.1.5.1
the error messages i get from mrtg is
<---->
C:\Program Files\mrtg\bin>perl mrtg cpu.cfg
Daemonizing MRTG ...
Do Not close this window. Or MRTG will die
ERROR: Target[blofeld.cpu][_IN_] '.1.3.6.1.4.1.9600.1.1.5.1.5.
$target->[1]{$mod
e} ' evaluated to ' ??????G???????656' instead of a number
ERROR: Target[blofeld.cpu][_OUT_] '.1.3.6.1.4.1.9600.1.1.5.1.5.
$target->[1]{$mo
de} ' evaluated to ' ??????G???????656' instead of a number
Use of uninitialized value in numeric lt (<) at mrtg line 371.
Use of uninitialized value in numeric lt (<) at mrtg line 375.
<---->
i am running mrtg on a windows 2003 server.
and the computer i am trying to access is a windwos 2000 server.

// Lennie


----- Original Message ----- 
From: "Joe Wixted" <jwixted at limecity.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Friday, January 02, 2004 4:28 PM
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server


> Have you been able to walk that oid with GetIF or some other SNMP tool?
>
> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Lennie
> Sent: Friday, January 02, 2004 10:27 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows 2000 server
>
> So.. now i have downloaded and installed the Free version of SNMP2CA.
> but i still dont get it to work.
> it?s that anything wrong whit this line ??
>
> Target[blofeld.CPU]: 1.3.6.1.4.1.9600.1.1.5.1.5:phonera at 192.168.1.50
>
> it is stil teling me that: noSuchName
>
> // Lennie
>
>
>
>
> ----- Original Message ----- 
> From: "William Owen" <William.Owen at ProfilesInternational.com>
> To: "'Alex van den Bogaerdt'" <alex at ergens.op.het.net>;
> <mrtg at list.ee.ethz.ch>
> Sent: Friday, January 02, 2004 2:46 PM
> Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows
> 2000 server
>
>
> > Win2k has a tendency to change the instance numbers of your Processors
> when
> > reboots occur.  I would recommend using the Free version of SNMP2CA
> > (http://www.snmp4tpc.com/snmp2ca.htm).  It will add the 1.3.6.1.4.1.9600
> > branch to a Win2k, Win2k3 or XP machine that won't change.  It also
allows
> > you to standardize your config files between the two.
> >
> > -----Original Message-----
> > From: Alex van den Bogaerdt [mailto:alex at ergens.op.het.net]
> > Sent: Friday, January 02, 2004 7:19 AM
> > To: mrtg at list.ee.ethz.ch
> > Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
> windows
> > 2000 server
> >
> > On Fri, Jan 02, 2004 at 02:03:06PM +0100, Lennie wrote:
> > > I have a problem whit my mrtg config file.
> > > i am monitoring 2 computer.
> > > one windows 2003 server
> > > and one windows 2000 server.
> > > when i am monitoring the CPU on the windows 20003 server everthings
> works
> > perfekt.
> > > but. when i am using the some settings for the windows 2000 server. i
> get
> > a lots of error messages.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Eric_Mailing_List at rednarb.com  Mon Jan  5 22:07:21 2004
From: Eric_Mailing_List at rednarb.com (Eric Brander)
Date: Mon, 5 Jan 2004 15:07:21 -0600
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows 2000 server
References: <9B46CC0C7C48D51182AC00508BC773180152BBF5@raleigh01.centra.com>
Message-ID: <02b201c3d3cf$eb69db20$fab3bed0@IS14805>

Only works with single processor systems. :(

Eric Brander
Eric_Mailing_List at rednarb dot com

----- Original Message ----- 
From: "Sutton, Rob" <rsutton at centra.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Monday, January 05, 2004 2:57 PM
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and
windows 2000 server


I use WMI along with MRTG and VBScripts. Here is the VBScript I use
to call
with MRTG and the MRTG Config file...

VBScript call to WMI:

On Error Resume Next
Set objArgs = WScript.Arguments
strComputer = objArgs.item(0)
Set objWMIService = GetObject("winmgmts:\\" & strComputer &
"\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from
Win32_Processor",,48)
For Each objItem in colItems
    Wscript.Echo "" & objItem.LoadPercentage
    Wscript.Echo "" & objItem.LoadPercentage
Next


MRTG cfg:

Target[SERVERNAME.processorLoad]: `cscript //nologo
D:\mrtg\bin\VB_Scripts\CPULoadSP.vbs SERVER NETBIOS NAME HERE`

I monitor just over 100 Windows 2000 and 2003 server this way. I had
tons of
issues with SNMP and Windows and found this to be the best way to
monitor
Windows servers. WMI RULES! Get Scriptomatic from Microsoft as well.
It's a
free WMI scripting tool. All of the counters you get in Performance
Monitor
are available through WMI. I monitor my MS SQL and IIS Counters
through WMI
as well.

Good Luck!

----->MRTG Knowledge Transfer (MRTGKT.COM) will be back online
shortly<----




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From garth.williams at acrodex.com  Mon Jan  5 22:25:55 2004
From: garth.williams at acrodex.com (Garth Williams)
Date: Mon, 5 Jan 2004 14:25:55 -0700
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows 2000 server
Message-ID: <EC20245B3C2C484F9CC477D3DF9055C02B3EC7@hebe.acrodex.net>

FYI (and if you DO want to use SNMP), then download SNMP2CA-STD from
snmp4tpc.com.  It FULLY supports multiple processors using SNMP, and
allows you to collect privileged (system), and user (application)
utilization percentages as well.  No pesky OID changes either!

Garth

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From garth.williams at acrodex.com  Mon Jan  5 22:33:16 2004
From: garth.williams at acrodex.com (Garth Williams)
Date: Mon, 5 Jan 2004 14:33:16 -0700
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows 2000 server
Message-ID: <EC20245B3C2C484F9CC477D3DF9055C02B3EC8@hebe.acrodex.net>

Well, to begin with, your target line is incorrect (needs 2 OIDs).

Here is the MRTG config I use. I run collection on BOTH Windows 2000 and Windows 2003 and gather stats from Windows 2000, 2003 and XP systems, using only slight variations of this config.

Obviously your OIDs will differ a wee bit with dual processors!

G

<snip>
Background[WIN2KFS1_CPU0]: #9090909
Target[WIN2KFS1_CPU0]: 1.3.6.1.4.1.9600.1.1.5.1.4.1.48&1.3.6.1.4.1.9600.1.1.5.1.6.1.48:cilbup at 192.168.200.10
ThreshDesc[WIN2KFS1_CPU0]: CPU #1 Usage (Percent) on System: WIN2KFS1
SetEnv[WIN2KFS1_CPU0]: STATURL="http://24.66.1.141/stats/servers/WIN2KFS1/cpu/WIN2KFS1_cpu0.html"
                    CUSTNAME="INTERNAL"
# creates red dotted line on the graph; match with ThreshMaxI
MaxBytes[WIN2KFS1_CPU0]: 75
AbsMax[WIN2KFS1_CPU0]: 100
Title[WIN2KFS1_CPU0]: CPU 1 Percent Utilization
Options[WIN2KFS1_CPU0]: gauge, nopercent
# Unscaled[WIN2KFS1_CPU0]: dwmy
# Supress[WIN2KFS1_CPU0]:dwmy
XSize[WIN2KFS1_CPU0]: 380
YSize[WIN2KFS1_CPU0]: 100
YLegend[WIN2KFS1_CPU0]: CPU Load (%)
ShortLegend[WIN2KFS1_CPU0]: %
Legend1[WIN2KFS1_CPU0]: CPU1 Priv Utilization in percent
Legend2[WIN2KFS1_CPU0]: CPU1 User Utilization in percent
# Legend3[WIN2KFS1_CPU0]:
# Legend4[WIN2KFS1_CPU0]:
LegendI[WIN2KFS1_CPU0]: CPU1_Priv_Load:&nbsp
LegendO[WIN2KFS1_CPU0]: CPU1_User_Load:&nbsp

# Use ThreshMinI for minimum threshold breach notification
# i.e. if under ThreshMinI, then threshunder.bat will run
# ThreshMinI[WIN2KFS1_CPU0]: 10
# ThreshProgI[WIN2KFS1_CPU0]: D:\\NET-SONAR\thresholds\threshunder.bat

# Use ThreshMaxI for maximum threshold breach notification for CPU0
# i.e. if over ThreshMaxI, then threshover.bat will run
ThreshMaxI[WIN2KFS1_CPU0]: 75
ThreshProgI[WIN2KFS1_CPU0]: D:\\NET-SONAR\thresholds\threshover.bat
ThreshProgOKI[WIN2KFS1_CPU0]: D:\\NET-SONAR\thresholds\threshok.bat
</snip>


-----Original Message-----
> it?s that anything wrong whit this line ??
>
> Target[blofeld.CPU]: 1.3.6.1.4.1.9600.1.1.5.1.5:phonera at 192.168.1.50
>
> it is stil teling me that: noSuchName
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From david at aragao.name  Mon Jan  5 23:05:40 2004
From: david at aragao.name (=?ISO-8859-1?Q?David_Arag=E3o?=)
Date: Mon, 05 Jan 2004 22:05:40 +0000
Subject: [mrtg] US Robotics router
Message-ID: <3FF9DFB4.5050101@aragao.name>

Hello,

I have been trying to use mrtg with a broadband router without success.
When I use the cfgmaker I get a mrtg.cfg with the following message 
about speed beeing 0...

### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# Target[192.168.0.10_1]: 1:public at 192.168.0.10:
# SetEnv[192.168.0.10_1]: MRTG_INT_IP="" MRTG_INT_DESCR="Ethernet-WAN"
# MaxBytes[192.168.0.10_1]: 0
# Title[192.168.0.10_1]: Traffic Analysis for 1 --
# PageTop[192.168.0.10_1]: <H1>Traffic Analysis for 1 -- </H1>

and everything is commented out ??

The strange thing is that if I use :

snmpwalk -v 2c -c public 192.168.0.10

I get the following....

SNMPv2-MIB::sysDescr.0 = STRING: USR Broadband Router
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9086
SNMPv2-MIB::sysUpTime.0 = Timeticks: (818800) 2:16:28.00
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysName.0 = STRING:
SNMPv2-MIB::sysLocation.0 = STRING:
SNMPv2-MIB::sysServices.0 = INTEGER: 2
IF-MIB::ifNumber.0 = INTEGER: 1
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifDescr.1 = STRING: Ethernet-WAN
IF-MIB::ifType.1 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifMtu.1 = INTEGER: 1500
IF-MIB::ifSpeed.1 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING: 0:c0:49:d6:63:96
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifLastChange.1 = Timeticks: (818850) 2:16:28.50
IF-MIB::ifInOctets.1 = Counter32: 101351561
IF-MIB::ifInUcastPkts.1 = Counter32: 176856
IF-MIB::ifInNUcastPkts.1 = Counter32: 64796
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 42182219
IF-MIB::ifOutUcastPkts.1 = Counter32: 169410
IF-MIB::ifOutNUcastPkts.1 = Counter32: 19
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 16
IF-MIB::ifSpecific.1 = OID: ccitt
End of MIB


I have trying to read documentation but could fix the settings and have 
mrtg following the proper variables.... (trafic in and trafic out)

Can anyone give me any tip ?

David

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From pedro at moebius.com.br  Tue Jan  6 02:35:26 2004
From: pedro at moebius.com.br (Pedro Alves)
Date: Mon,  5 Jan 2004 23:35:26 -0200
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows 2000 server
In-Reply-To: <EC20245B3C2C484F9CC477D3DF9055C02B3EC8@hebe.acrodex.net>
References: <EC20245B3C2C484F9CC477D3DF9055C02B3EC8@hebe.acrodex.net>
Message-ID: <1073352926.3ffa10ded2a5c@webmail.moebius.com.br>

Another Aproach....

  http://www.symom.com.br/agente/DocumentacaoSymomAgenteMRTG_en.pdf

-- 
 Pedro Alves
 Moebius Tecnologia
 www.moebius.com.br | pedro at moebius.com.br
 Tel. RJ: 2249-4370 | Fax: 2249-4367 | Cel.: 9145-5026



Citando Garth Williams <garth.williams at acrodex.com>:
> Well, to begin with, your target line is incorrect (needs 2 OIDs).
> 
> Here is the MRTG config I use. I run collection on BOTH Windows 2000 and
> Windows 2003 and gather stats from Windows 2000, 2003 and XP systems, using
...............................

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From tmelcher at trilogytel.com  Tue Jan  6 05:37:56 2004
From: tmelcher at trilogytel.com (Trent Melcher)
Date: Mon, 5 Jan 2004 22:37:56 -0600
Subject: [mrtg] Re: US Robotics router
In-Reply-To: <3FF9DFB4.5050101@aragao.name>
Message-ID: <000001c3d40e$dee89140$0200a8c0@cheetah>

Try running cfgmaker with public at 192.168.0.10:::::2   as your router,
you need to specify your using v2c.

Trent

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of David Arag?o
Sent: Monday, January 05, 2004 4:06 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] US Robotics router


Hello,

I have been trying to use mrtg with a broadband router without success.
When I use the cfgmaker I get a mrtg.cfg with the following message 
about speed beeing 0...

### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# Target[192.168.0.10_1]: 1:public at 192.168.0.10:
# SetEnv[192.168.0.10_1]: MRTG_INT_IP="" MRTG_INT_DESCR="Ethernet-WAN" #
MaxBytes[192.168.0.10_1]: 0 # Title[192.168.0.10_1]: Traffic Analysis
for 1 -- # PageTop[192.168.0.10_1]: <H1>Traffic Analysis for 1 -- </H1>

and everything is commented out ??

The strange thing is that if I use :

snmpwalk -v 2c -c public 192.168.0.10

I get the following....

SNMPv2-MIB::sysDescr.0 = STRING: USR Broadband Router
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9086
SNMPv2-MIB::sysUpTime.0 = Timeticks: (818800) 2:16:28.00
SNMPv2-MIB::sysContact.0 = STRING: SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysName.0 = STRING: SNMPv2-MIB::sysLocation.0 = STRING:
SNMPv2-MIB::sysServices.0 = INTEGER: 2 IF-MIB::ifNumber.0 = INTEGER: 1
IF-MIB::ifIndex.1 = INTEGER: 1 IF-MIB::ifDescr.1 = STRING: Ethernet-WAN
IF-MIB::ifType.1 = INTEGER: ethernetCsmacd(6) IF-MIB::ifMtu.1 = INTEGER:
1500 IF-MIB::ifSpeed.1 = Gauge32: 0 IF-MIB::ifPhysAddress.1 = STRING:
0:c0:49:d6:63:96 IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.1 = INTEGER: up(1) IF-MIB::ifLastChange.1 =
Timeticks: (818850) 2:16:28.50 IF-MIB::ifInOctets.1 = Counter32:
101351561 IF-MIB::ifInUcastPkts.1 = Counter32: 176856
IF-MIB::ifInNUcastPkts.1 = Counter32: 64796 IF-MIB::ifInDiscards.1 =
Counter32: 0 IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0 IF-MIB::ifOutOctets.1 =
Counter32: 42182219 IF-MIB::ifOutUcastPkts.1 = Counter32: 169410
IF-MIB::ifOutNUcastPkts.1 = Counter32: 19 IF-MIB::ifOutDiscards.1 =
Counter32: 0 IF-MIB::ifOutErrors.1 = Counter32: 0 IF-MIB::ifOutQLen.1 =
Gauge32: 16 IF-MIB::ifSpecific.1 = OID: ccitt End of MIB


I have trying to read documentation but could fix the settings and have 
mrtg following the proper variables.... (trafic in and trafic out)

Can anyone give me any tip ?

David

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Tue Jan  6 09:56:42 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Tue, 6 Jan 2004 09:56:42 +0100
Subject: [mrtg] Re: US Robotics router
In-Reply-To: <3FF9DFB4.5050101@aragao.name>; from david@aragao.name on Mon, Jan 05, 2004 at 10:05:40PM +0000
References: <3FF9DFB4.5050101@aragao.name>
Message-ID: <20040106095642.A26329@slot.hollandcasino.net>

On Mon, Jan 05, 2004 at 10:05:40PM +0000, David Arag?o wrote:

> When I use the cfgmaker I get a mrtg.cfg with the following message 
> about speed beeing 0...

> The strange thing is that if I use :
> 
> snmpwalk -v 2c -c public 192.168.0.10
> 
> I get the following....
> 
[...]

> IF-MIB::ifSpeed.1 = Gauge32: 0

Why is this strange?  Your router tells MRTG the speed is 0.

Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From netgnom at blackcodemail.com  Tue Jan  6 13:03:23 2004
From: netgnom at blackcodemail.com (netgnom)
Date: Tue, 6 Jan 2004 04:03:23 -0800 (PST)
Subject: [mrtg] How to display 2 values, where the first is an math expression of
    the second?
Message-ID: <20040106120323.29AD0394D@sitemail.everyone.net>

An embedded and charset-unspecified text was scrubbed...
Name: not available
Url: https://lists.oetiker.ch/pipermail/mrtg/attachments/20040106/f9c9c8ed/attachment.asc 

From kyamamoto at digitalforest.co.jp  Tue Jan  6 14:27:11 2004
From: kyamamoto at digitalforest.co.jp (kyamamoto at digitalforest.co.jp)
Date: Tue, 6 Jan 2004 22:27:11 +0900
Subject: [mrtg] How to make config for SonicWALL firewalls?
Message-ID: <OF883CC306.4E610891-ON49256E13.00495A96-49256E13.0049E6A2@digitalforest.co.jp>

Hi. As per the subject I do not have a clue.
When I made a config file using cfgmaker they surely 
respond to cfgmaker but the seems a crap as the conf 
does not show any result. ALL zero in spite of the fact
that they host 100 Mbps networks. Moreover the MAC 
addresses of the interfaces are duplicate.

Have anyone succeeded to make a meaningful conf
for SonicWALL Pro/Pro200/Pro 100/Soho 3/50?

--
kyamamoto

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Eric_Mailing_List at rednarb.com  Tue Jan  6 14:40:11 2004
From: Eric_Mailing_List at rednarb.com (Eric Brander)
Date: Tue, 6 Jan 2004 07:40:11 -0600
Subject: [mrtg] Re: US Robotics router
References: <3FF9DFB4.5050101@aragao.name>
Message-ID: <034601c3d45b$3e787520$fab3bed0@IS14805>

Your router is reporting that it has a speed of 0.  No idea why of
course, but it shouldn't matter.  Uncomment the lines and make sure
the maxbytes is accurate to the speed of the port.

Eric Brander
Eric_Mailing_List at rednarb dot com

----- Original Message ----- 
From: "David Arag?o" <david at aragao.name>
To: <mrtg at list.ee.ethz.ch>
Sent: Monday, January 05, 2004 4:05 PM
Subject: [mrtg] US Robotics router


Hello,

I have been trying to use mrtg with a broadband router without
success.
When I use the cfgmaker I get a mrtg.cfg with the following message
about speed beeing 0...

### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# Target[192.168.0.10_1]: 1:public at 192.168.0.10:
# SetEnv[192.168.0.10_1]: MRTG_INT_IP=""
MRTG_INT_DESCR="Ethernet-WAN"
# MaxBytes[192.168.0.10_1]: 0
# Title[192.168.0.10_1]: Traffic Analysis for 1 --
# PageTop[192.168.0.10_1]: <H1>Traffic Analysis for 1 -- </H1>

and everything is commented out ??

The strange thing is that if I use :

snmpwalk -v 2c -c public 192.168.0.10

I get the following....

SNMPv2-MIB::sysDescr.0 = STRING: USR Broadband Router
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9086
SNMPv2-MIB::sysUpTime.0 = Timeticks: (818800) 2:16:28.00
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysName.0 = STRING:
SNMPv2-MIB::sysLocation.0 = STRING:
SNMPv2-MIB::sysServices.0 = INTEGER: 2
IF-MIB::ifNumber.0 = INTEGER: 1
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifDescr.1 = STRING: Ethernet-WAN
IF-MIB::ifType.1 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifMtu.1 = INTEGER: 1500
IF-MIB::ifSpeed.1 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING: 0:c0:49:d6:63:96
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifLastChange.1 = Timeticks: (818850) 2:16:28.50
IF-MIB::ifInOctets.1 = Counter32: 101351561
IF-MIB::ifInUcastPkts.1 = Counter32: 176856
IF-MIB::ifInNUcastPkts.1 = Counter32: 64796
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 42182219
IF-MIB::ifOutUcastPkts.1 = Counter32: 169410
IF-MIB::ifOutNUcastPkts.1 = Counter32: 19
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 16
IF-MIB::ifSpecific.1 = OID: ccitt
End of MIB


I have trying to read documentation but could fix the settings and
have
mrtg following the proper variables.... (trafic in and trafic out)

Can anyone give me any tip ?

David

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From craigbaker at blueyonder.co.uk  Tue Jan  6 15:05:13 2004
From: craigbaker at blueyonder.co.uk (C Baker)
Date: Tue, 6 Jan 2004 14:05:13 -0000
Subject: [mrtg] Asynchronous connections
Message-ID: <2BC02A5BC0F1BD4D8A6169A43DE1C0A00B646F@cyclone.home.local>

Is there a way to tell MRTG that the upstream bandwidth is lower than the
downstream?

Its no big deal, would just make the percentages accurate.

Thanks

C

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From AWaltman at anacomp.com  Tue Jan  6 15:40:09 2004
From: AWaltman at anacomp.com (Waltman, Adam)
Date: Tue, 6 Jan 2004 06:40:09 -0800 
Subject: [mrtg] Pulling specific traffic off a router
Message-ID: <2828339DC948C644A03C1ECEAA0736D41559BE@corpex1.anacomp.com>

Hi,

I have a customer who would like to see how much bandwidth https, ftp and
smtp are using.  I already get their total bandwidth utilization with MRTG
but I was curious if this is possible.

The router is a Cisco 3640.  Would I have to set up IP accounting on the
router so MRTG could grab these stats and graph them.

Any help would be great.

Thanks,
Adam

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Eric_Mailing_List at rednarb.com  Tue Jan  6 15:52:01 2004
From: Eric_Mailing_List at rednarb.com (Eric Brander)
Date: Tue, 6 Jan 2004 08:52:01 -0600
Subject: [mrtg] Re: Asynchronous connections
References: <2BC02A5BC0F1BD4D8A6169A43DE1C0A00B646F@cyclone.home.local>
Message-ID: <035601c3d464$acbab080$fab3bed0@IS14805>

>From the reference:

"If you need two different MaxBytes values for the two monitored
variables, you can use MaxBytes1 and MaxBytes2 instead of MaxBytes."

Never tried it though.

Eric Brander
Eric_Mailing_List at rednarb dot com

----- Original Message ----- 
From: "C Baker" <craigbaker at blueyonder.co.uk>
To: <mrtg at list.ee.ethz.ch>
Sent: Tuesday, January 06, 2004 8:05 AM
Subject: [mrtg] Asynchronous connections


Is there a way to tell MRTG that the upstream bandwidth is lower
than the
downstream?

Its no big deal, would just make the percentages accurate.

Thanks

C

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From dan.mcdonald at austinenergy.com  Tue Jan  6 16:15:09 2004
From: dan.mcdonald at austinenergy.com (Daniel J McDonald)
Date: Tue, 06 Jan 2004 09:15:09 -0600
Subject: [mrtg] Re: Pulling specific traffic off a router
In-Reply-To: <2828339DC948C644A03C1ECEAA0736D41559BE@corpex1.anacomp.com>
References: <2828339DC948C644A03C1ECEAA0736D41559BE@corpex1.anacomp.com>
Message-ID: <1073402109.30782.103.camel@mcdonalddj-lnx.electric.ci.austin.tx.us>

On Tue, 2004-01-06 at 08:40, Waltman, Adam wrote:
> Hi,
> 
> I have a customer who would like to see how much bandwidth https, ftp and
> smtp are using.  I already get their total bandwidth utilization with MRTG
> but I was curious if this is possible.

This used to be a frequent discussion topic.  There are three solutions.

1.  Dump MRTG and use flow-tools/flow-stat for this information.
2.  set up QOS and use the CAR MIB or the CISCO-QOS mib
3.  write firewall rules on the server in netfilter and pull the
information from there.

IP accounting is almost never the appropriate solution.  IP accounting
is a deprecated facility that was replaced by Netflow Switching in ios
11.0 (actually, there was undocumented support for it in 10.3.5 and
later in the core train).  That was 7-8 years ago...

> The router is a Cisco 3640.  Would I have to set up IP accounting on the
> router so MRTG could grab these stats and graph them.
> 
> Any help would be great.
> 
> Thanks,
> Adam
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
-- 
Daniel J McDonald <dan.mcdonald at austinenergy.com>
Austin Energy

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From dan.mcdonald at austinenergy.com  Tue Jan  6 16:33:44 2004
From: dan.mcdonald at austinenergy.com (Daniel J McDonald)
Date: Tue, 06 Jan 2004 09:33:44 -0600
Subject: [mrtg] Re: Pulling specific traffic off a router
In-Reply-To: <001901c3d469$4ea11520$0201a8c0@pentuimwv8ohip>
References: <2828339DC948C644A03C1ECEAA0736D41559BE@corpex1.anacomp.com>
	 <1073402109.30782.103.camel@mcdonalddj-lnx.electric.ci.austin.tx.us>
	 <001901c3d469$4ea11520$0201a8c0@pentuimwv8ohip>
Message-ID: <1073403223.30784.111.camel@mcdonalddj-lnx.electric.ci.austin.tx.us>

On Tue, 2004-01-06 at 09:25, Yau Tee Kuan wrote:
> What type of flow-stat or flow-tools? Any recommendation ?

www.splintered.net/sw/flow-tools.html

there you will find the collector.  A nice front-end is Dave Plonka's
FlowScan, of which a link is found on the flow-tools site.

> ----- Original Message -----
> From: "Daniel J McDonald" <dan.mcdonald at austinenergy.com>

> > On Tue, 2004-01-06 at 08:40, Waltman, Adam wrote:
> > > Hi,
> > > I have a customer who would like to see how much bandwidth https, ftp
> and
> > > smtp are using. 
> > This used to be a frequent discussion topic.  There are three solutions.
> >
> > 1.  Dump MRTG and use flow-tools/flow-stat for this information.
> > 2.  set up QOS and use the CAR MIB or the CISCO-QOS mib
> > 3.  write firewall rules on the server in netfilter and pull the
> > information from there.
-- 
Daniel J McDonald, CCIE 2495, CNX
Austin Energy


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From netgnom at blackcodemail.com  Tue Jan  6 16:41:56 2004
From: netgnom at blackcodemail.com (netgnom)
Date: Tue, 6 Jan 2004 07:41:56 -0800 (PST)
Subject: [mrtg] How to display 2 values, where the first is an math expression of
    the second?
Message-ID: <20040106154156.1942D3967@sitemail.everyone.net>

An embedded and charset-unspecified text was scrubbed...
Name: not available
Url: https://lists.oetiker.ch/pipermail/mrtg/attachments/20040106/f8050237/attachment.pot 

From SWinter at becu.org  Tue Jan  6 16:52:59 2004
From: SWinter at becu.org (Winter, R. Stephen)
Date: Tue, 6 Jan 2004 07:52:59 -0800
Subject: [mrtg] Monitoring Contivity Users...
Message-ID: <D65D9268A6024343B5B0C32A3797ECA7C9D4DC@tmshasta.inside.becu.org>

Hi All, I was wondering if anyone has had luck monitoring the number of VPN'd in users on a Nortel Contivity?  I've searched the Archive and the MIBs but can't seem to find anything that would work.  

Thanks.

________________________
RStephen Winter
IT Network & Security, BECU
swinter at becu.org
(206)439-5908



NOTICE: This communication and any attachments may contain privileged or otherwise confidential information.  If you are not the intended recipient or believe that you may have received this communication in error, please reply to the sender indicating that fact and delete the copy you received without printing, copying, retransmitting, disseminating, or otherwise using the information. Thank you.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From rsutton at centra.com  Tue Jan  6 17:13:29 2004
From: rsutton at centra.com (Sutton, Rob)
Date: Tue, 6 Jan 2004 11:13:29 -0500 
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and wi
	ndows 2000 server
Message-ID: <9B46CC0C7C48D51182AC00508BC773180152BC03@raleigh01.centra.com>

The VBScript returns two values... The same values but two none the less.

-----Original Message-----
From: Garth Williams [mailto:garth.williams at acrodex.com] 
Sent: Monday, January 05, 2004 4:33 PM
To: Lennie
Cc: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server

Well, to begin with, your target line is incorrect (needs 2 OIDs).

Here is the MRTG config I use. I run collection on BOTH Windows 2000 and
Windows 2003 and gather stats from Windows 2000, 2003 and XP systems, using
only slight variations of this config.

Obviously your OIDs will differ a wee bit with dual processors!

G

<snip>
Background[WIN2KFS1_CPU0]: #9090909
Target[WIN2KFS1_CPU0]:
1.3.6.1.4.1.9600.1.1.5.1.4.1.48&1.3.6.1.4.1.9600.1.1.5.1.6.1.48:cilbup at 192.1
68.200.10
ThreshDesc[WIN2KFS1_CPU0]: CPU #1 Usage (Percent) on System: WIN2KFS1
SetEnv[WIN2KFS1_CPU0]:
STATURL="http://24.66.1.141/stats/servers/WIN2KFS1/cpu/WIN2KFS1_cpu0.html"
                    CUSTNAME="INTERNAL"
# creates red dotted line on the graph; match with ThreshMaxI
MaxBytes[WIN2KFS1_CPU0]: 75
AbsMax[WIN2KFS1_CPU0]: 100
Title[WIN2KFS1_CPU0]: CPU 1 Percent Utilization
Options[WIN2KFS1_CPU0]: gauge, nopercent
# Unscaled[WIN2KFS1_CPU0]: dwmy
# Supress[WIN2KFS1_CPU0]:dwmy
XSize[WIN2KFS1_CPU0]: 380
YSize[WIN2KFS1_CPU0]: 100
YLegend[WIN2KFS1_CPU0]: CPU Load (%)
ShortLegend[WIN2KFS1_CPU0]: %
Legend1[WIN2KFS1_CPU0]: CPU1 Priv Utilization in percent
Legend2[WIN2KFS1_CPU0]: CPU1 User Utilization in percent
# Legend3[WIN2KFS1_CPU0]:
# Legend4[WIN2KFS1_CPU0]:
LegendI[WIN2KFS1_CPU0]: CPU1_Priv_Load:&nbsp
LegendO[WIN2KFS1_CPU0]: CPU1_User_Load:&nbsp

# Use ThreshMinI for minimum threshold breach notification
# i.e. if under ThreshMinI, then threshunder.bat will run
# ThreshMinI[WIN2KFS1_CPU0]: 10
# ThreshProgI[WIN2KFS1_CPU0]: D:\\NET-SONAR\thresholds\threshunder.bat

# Use ThreshMaxI for maximum threshold breach notification for CPU0
# i.e. if over ThreshMaxI, then threshover.bat will run
ThreshMaxI[WIN2KFS1_CPU0]: 75
ThreshProgI[WIN2KFS1_CPU0]: D:\\NET-SONAR\thresholds\threshover.bat
ThreshProgOKI[WIN2KFS1_CPU0]: D:\\NET-SONAR\thresholds\threshok.bat
</snip>


-----Original Message-----
> it?s that anything wrong whit this line ??
>
> Target[blofeld.CPU]: 1.3.6.1.4.1.9600.1.1.5.1.5:phonera at 192.168.1.50
>
> it is stil teling me that: noSuchName
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From rsutton at centra.com  Tue Jan  6 17:19:53 2004
From: rsutton at centra.com (Sutton, Rob)
Date: Tue, 6 Jan 2004 11:19:53 -0500 
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and wi
	ndows 2000 server
Message-ID: <9B46CC0C7C48D51182AC00508BC773180152BC04@raleigh01.centra.com>

I have all of my scripts here http://Mrtgkt.com/Scripts 

I haven't had a chance to do descriptions yet but the names should give you
some idea on what they are. I do have scripts for MP's as well. Up to Quad. 



-----Original Message-----
From: Garth Williams [mailto:garth.williams at acrodex.com] 
Sent: Monday, January 05, 2004 4:33 PM
To: Lennie
Cc: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem whit CPU monitoring on windows 2003 and windows
2000 server

Well, to begin with, your target line is incorrect (needs 2 OIDs).

Here is the MRTG config I use. I run collection on BOTH Windows 2000 and
Windows 2003 and gather stats from Windows 2000, 2003 and XP systems, using
only slight variations of this config.

Obviously your OIDs will differ a wee bit with dual processors!

G

<snip>
Background[WIN2KFS1_CPU0]: #9090909
Target[WIN2KFS1_CPU0]:
1.3.6.1.4.1.9600.1.1.5.1.4.1.48&1.3.6.1.4.1.9600.1.1.5.1.6.1.48:cilbup at 192.1
68.200.10
ThreshDesc[WIN2KFS1_CPU0]: CPU #1 Usage (Percent) on System: WIN2KFS1
SetEnv[WIN2KFS1_CPU0]:
STATURL="http://24.66.1.141/stats/servers/WIN2KFS1/cpu/WIN2KFS1_cpu0.html"
                    CUSTNAME="INTERNAL"
# creates red dotted line on the graph; match with ThreshMaxI
MaxBytes[WIN2KFS1_CPU0]: 75
AbsMax[WIN2KFS1_CPU0]: 100
Title[WIN2KFS1_CPU0]: CPU 1 Percent Utilization
Options[WIN2KFS1_CPU0]: gauge, nopercent
# Unscaled[WIN2KFS1_CPU0]: dwmy
# Supress[WIN2KFS1_CPU0]:dwmy
XSize[WIN2KFS1_CPU0]: 380
YSize[WIN2KFS1_CPU0]: 100
YLegend[WIN2KFS1_CPU0]: CPU Load (%)
ShortLegend[WIN2KFS1_CPU0]: %
Legend1[WIN2KFS1_CPU0]: CPU1 Priv Utilization in percent
Legend2[WIN2KFS1_CPU0]: CPU1 User Utilization in percent
# Legend3[WIN2KFS1_CPU0]:
# Legend4[WIN2KFS1_CPU0]:
LegendI[WIN2KFS1_CPU0]: CPU1_Priv_Load:&nbsp
LegendO[WIN2KFS1_CPU0]: CPU1_User_Load:&nbsp

# Use ThreshMinI for minimum threshold breach notification
# i.e. if under ThreshMinI, then threshunder.bat will run
# ThreshMinI[WIN2KFS1_CPU0]: 10
# ThreshProgI[WIN2KFS1_CPU0]: D:\\NET-SONAR\thresholds\threshunder.bat

# Use ThreshMaxI for maximum threshold breach notification for CPU0
# i.e. if over ThreshMaxI, then threshover.bat will run
ThreshMaxI[WIN2KFS1_CPU0]: 75
ThreshProgI[WIN2KFS1_CPU0]: D:\\NET-SONAR\thresholds\threshover.bat
ThreshProgOKI[WIN2KFS1_CPU0]: D:\\NET-SONAR\thresholds\threshok.bat
</snip>


-----Original Message-----
> it?s that anything wrong whit this line ??
>
> Target[blofeld.CPU]: 1.3.6.1.4.1.9600.1.1.5.1.5:phonera at 192.168.1.50
>
> it is stil teling me that: noSuchName
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From elemint at cox.net  Tue Jan  6 17:48:06 2004
From: elemint at cox.net (Jim)
Date: Tue, 06 Jan 2004 09:48:06 -0700
Subject: [mrtg] mrtg and squid
Message-ID: <1073407686.13387.24.camel@sid.int.pascuayaquitribe.org>

I am using the documentation from
http://people.ee.ethz.ch/~oetiker/webtools/mrtg/mrtg-squid.html to try
to get squid working with mrtg.  Below is the error message that is
produced when I try to run my mrtg cfg file.  




mrtg  /var/www/mrtg/squid/mrtg.squid.cfg
Unknown SNMP var cacheHttpHits
 at /usr/bin/mrtg line 1683
Unknown SNMP var cacheProtoClientHttpRequests
 at /usr/bin/mrtg line 1683
WARNING: Expected a number but got '3 days, 19:41:34'
WARNING: Expected a number but got 'squid 2.5.STABLE4'
ERROR: Target[proxy-hit][_IN_] ' $$target[1]{$mode} ' did not eval into
defined data
ERROR: Target[proxy-hit][_OUT_] ' $$target[1]{$mode} ' did not eval into
defined data
WARNING: Skipping Update of proxy-hit, inlast is not defined
WARNING: Skipping Update of proxy-hit, outlast is not defined


Jim


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From CihanS at garanti.com.tr  Tue Jan  6 17:55:38 2004
From: CihanS at garanti.com.tr (CihanS at garanti.com.tr)
Date: Tue, 6 Jan 2004 18:55:38 +0200
Subject: [mrtg] cisco ios and snmpv2c...
Message-ID: <5FA6F2E719F6C04FAD76837E84929C34047DDC35@gtiexc5.fw.teknoloji.com.tr>


I am trying to figure out which cisco interfaces can be polled with snmpv2, I have a 7509 with 8-port e1 on it and some of the e1s do not return a value for snmpv2 query. And those ports have HDLC configuration but frame-relay e1s are ok. Is there a better way (maybein the cisco private mib) to poll the inferfaces for usage using snmpv2?

also which interfaces can be polled with snmpv2 on cisco side? Thanks

***********************************************************
Cihan SUBASI
Garanti Technology
Internet ve Yazilim Hizmetleri
Tel:(90)(212)4783426 GSM:(90)(533)(2750353)
Fax:(90)(212)6576150
http://www.garantitechnology.com <http://www.garantitechnology.com/>
mailto:cihans at garanti.com.tr
Success is a wonderful thing, but never underestimate the value of failure.
Failure teaches many more things than success ever can.
***********************************************************




This message and attachments are confidential and intended solely for the individual(s) stated in this
message.If you received this message although you are not the addressee you are responsible to keep the
message confidential .The sender has no responsibility for the accuracy or correctness of the
information in the message and its attachments.Our company shall have no liability for any changes
or late receiving,loss of integrity and confidentiality,viruses and any damages caused in
anyway to your computer system.

Bu mesaj ve ekleri mesajda gonderildigi belirtilen kisi/kisilere ozeldir ve gizlidir.Bu mesajin muhatabi
olmamaniza ragmen tarafiniza ulasmis olmasi halinde mesaj iceriginin gizliligi ve bu gizlilik yukumlulugune
uyulmasi zorunlulugu tarafiniz icin de soz konusudur.Mesaj ve eklerinde yer alan bilgilerin dogrulugu ve
guncelligi konusunda gonderenin ya da sirketimizin herhangi bir sorumlulugu bulunmamaktadir.Sirketimiz
mesajin ve bilgilerinin size degisiklige ugrayarak veya gec ulasmasindan, butunlugunun ve gizliliginin
korunamamasindan, virus icermesinden ve bilgisayar sisteminize verebilecegi herhangi bir zarardan
sorumlu tutulamaz.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From bilal at it-pro.net  Tue Jan  6 21:21:23 2004
From: bilal at it-pro.net (Bilal Dar)
Date: Tue, 6 Jan 2004 23:21:23 +0300
Subject: [mrtg] max speed
Message-ID: <009c01c3d492$aa22ffc0$970766d4@dar>

Hi,
I want to know how can I change the max speed on my graphs, it shows up 193kBytes/s and my link is 256kbps. Because of this percentage utilization is not correct, how can I change this. 

Thanks.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From sahafeez at edgefocus.com  Tue Jan  6 21:38:00 2004
From: sahafeez at edgefocus.com (Sean Hafeez)
Date: Tue, 06 Jan 2004 12:38:00 -0800
Subject: [mrtg] Re: max speed
In-Reply-To: <009c01c3d492$aa22ffc0$970766d4@dar>
References: <009c01c3d492$aa22ffc0$970766d4@dar>
Message-ID: <3FFB1CA8.3070806@edgefocus.com>

look in your mrtg.cfg file for that interface. it is very easy to spot.


Bilal Dar wrote:

> Hi,
> I want to know how can I change the max speed on my graphs, it shows up 193kBytes/s and my link is 256kbps. Because of this percentage utilization is not correct, how can I change this. 
> 
> Thanks.
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 
> 
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Corey.Fruitman at allstream.com  Tue Jan  6 21:40:19 2004
From: Corey.Fruitman at allstream.com (Fruitman, Corey)
Date: Tue, 6 Jan 2004 15:40:19 -0500
Subject: [mrtg] Re: max speed
Message-ID: <F0A5661C0654E141B2BA417705F2B278C9DAF5@TOREX006.att-intra.com>

The max speed you see on the graph is actually the highest number of bytes per second you've put through the interface for one polling interval -- not the maximum possible throughput on the interface.  So, in your case, you have a 256k pipe, but you've never maxed it out for five minutes.  The highest five minute average you've hit is 193k.

If you're having problems with the percentage throughput, check your MaxBytes variable in MRTG.  Should do the trick.

Corey.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Bilal Dar
Sent: January 6, 2004 3:21 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] max speed


Hi,
I want to know how can I change the max speed on my graphs, it shows up 193kBytes/s and my link is 256kbps. Because of this percentage utilization is not correct, how can I change this. 

Thanks.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From petelists at templin.org  Tue Jan  6 21:49:22 2004
From: petelists at templin.org (Pete Templin)
Date: Tue, 06 Jan 2004 14:49:22 -0600
Subject: [mrtg] Re: max speed
In-Reply-To: <009c01c3d492$aa22ffc0$970766d4@dar>
References: <009c01c3d492$aa22ffc0$970766d4@dar>
Message-ID: <3FFB1F52.3030106@templin.org>

Set MaxBytes to 48000.  MRTG thinks your T1 is a T1.

Bilal Dar wrote:

> Hi,
> I want to know how can I change the max speed on my graphs, it shows up 193kBytes/s and my link is 256kbps. Because of this percentage utilization is not correct, how can I change this. 
> 
> Thanks.
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From FErvin at 3dsi.com  Tue Jan  6 22:30:42 2004
From: FErvin at 3dsi.com (Frank Ervin)
Date: Tue, 6 Jan 2004 16:30:42 -0500 
Subject: [mrtg] PIX Firewall
Message-ID: <A14D65DC2664D511B61300A0CC3F1634220870@moe.3dsi.com>

Hello all,

I am trying to access CPU, memory, and connections on a Cisco PIX 515 E
running IOS 6.3(2).  I am able to get all interfaces by IP, so I am assuming
(correctly??) that SNMP is enabled properly on the firewall. MRTG seems to
run properly, all of the OIDs I have tried return nothing but zeros,
although all the traffic data is accurate (I am also successfully using
getlog.pl to monitor servers)... I have 2 Questions:
1. Do OIDs vary between devices of the same type (i.e. can OIDs vary from
one PIX to another)?
2. If not-- Has anyone got any OIDs that work with a PIX 515 E running IOS
6.3(2)? 

I am unable to run GetIf in order to do an SNMP walk becuase we've no
servers with SNMP installed at our production location, and would rather not
have to install it if at all possible because of security concerns... Does
anyone know of a SNMP walking utility that contains it's own SNMP code like
MRTG does?

Any other suggestions of things to look at would be greatly appreciated.
TIA!

Frank

Here is part of my cfg:

Target[PIX01-1]:
1.3.6.1.4.1.9.9.109.1.1.1.1.4.1&1.3.6.1.4.1.9.9.109.1.1.1.1.5.1:xxxstring at xx
xip
Options[PIX01-1]: gauge,nopercent,growright,nobanner,integer
WithPeak[PIX01-1]: wmy
YLegend[PIX01-1]: Util(percent)
MaxBytes[PIX01-1]: 100
LegendI[PIX01-1]: CPU Usage (5 secs)
LegendO[PIX01-1]: CPU Usage (1 min)
Title[PIX01-1]: My PIX
Unscaled[PIX01-1]: dwmy
Legend1[PIX01-1]: CPU utilisation over 1 minute
Legend2[PIX01-1]: CPU utilisation over 5 minute
Legend3[PIX01-1]: Maximal CPU utilisation over 1 minute
Legend4[PIX01-1]: Maximal CPU utilisation over 5 minute
ShortLegend[PIX01-1]: %
PageTop[PIX01-1]: <table width="100%" border="0">
 <tr>
  <td><h2>Cisco CPU Utilisation Report</h2></td>
 </tr>
 <tr>
  <td><h3>PIX CPU</h3></td>
 </tr>
 <tr>
  <td><p>PIX :10.10.20.1</p></td>
 </tr>
 </table>

Target[PIX01-2]:
1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1.1.1.6.1:xxxstring at xxxip
MaxBytes[PIX01-2]: 1024
Title[PIX01-2]: PIX 515E MEM
PageTop[PIX01-2]: <H1>PIX01 MEM</H1>
Options[PIX01-2]: gauge, nopercent, unknaszero
YLegend[PIX01-2]: Bytes
ShortLegend[PIX01-2]: Bytes
Legend1[PIX01-2]: Free
Legend2[PIX01-2]: Used
Legend3[PIX01-2]: Max value per interval on graph
Legend4[PIX01-2]: .
LegendI[PIX01-2]: Free
LegendO[PIX01-2]: Used
Colours[PIX01-2]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[PIX01-2]: ymw


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From kj at sunclipse.com  Tue Jan  6 23:05:54 2004
From: kj at sunclipse.com (Keith E Johnson)
Date: Tue, 6 Jan 2004 14:05:54 -0800 
Subject: [mrtg] Re: PIX Firewall
Message-ID: <133ECBFB56596F41A7C89CF22B90DB5E030D8342@sisxch03>

Your CPU Config is fine, but you need to move the maxbytes up to atleat 64MB
depending on how much memory you have.


The current connections OID is 1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.6

I have a script that grabs all kinds of other stats if you want it...
CPU
Conn - Current
Conn - TCP
Conn - UDP
Fixup - FTP
Fixup - HTTP
Fixup - TCP
Xlate - Current
Memory
Authenticated users

Keith Johnson 
LAN Administrator 
Amcor Sunclipse North America 
6600 Valley View Street, Buena Park, CA 90620 
Voice: 714.562.6179 Fax: 714.562.2036 
Email: keith.johnson at sunclipse.com 

-----Original Message-----
From: Frank Ervin [mailto:FErvin at 3dsi.com] 
Sent: Tuesday, January 06, 2004 1:31 PM
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] PIX Firewall

Hello all,

I am trying to access CPU, memory, and connections on a Cisco PIX 515 E
running IOS 6.3(2).  I am able to get all interfaces by IP, so I am assuming
(correctly??) that SNMP is enabled properly on the firewall. MRTG seems to
run properly, all of the OIDs I have tried return nothing but zeros,
although all the traffic data is accurate (I am also successfully using
getlog.pl to monitor servers)... I have 2 Questions:
1. Do OIDs vary between devices of the same type (i.e. can OIDs vary from
one PIX to another)?
2. If not-- Has anyone got any OIDs that work with a PIX 515 E running IOS
6.3(2)? 

I am unable to run GetIf in order to do an SNMP walk becuase we've no
servers with SNMP installed at our production location, and would rather not
have to install it if at all possible because of security concerns... Does
anyone know of a SNMP walking utility that contains it's own SNMP code like
MRTG does?

Any other suggestions of things to look at would be greatly appreciated.
TIA!

Frank

Here is part of my cfg:

Target[PIX01-1]:
1.3.6.1.4.1.9.9.109.1.1.1.1.4.1&1.3.6.1.4.1.9.9.109.1.1.1.1.5.1:xxxstring at xx
xip
Options[PIX01-1]: gauge,nopercent,growright,nobanner,integer
WithPeak[PIX01-1]: wmy
YLegend[PIX01-1]: Util(percent)
MaxBytes[PIX01-1]: 100
LegendI[PIX01-1]: CPU Usage (5 secs)
LegendO[PIX01-1]: CPU Usage (1 min)
Title[PIX01-1]: My PIX
Unscaled[PIX01-1]: dwmy
Legend1[PIX01-1]: CPU utilisation over 1 minute
Legend2[PIX01-1]: CPU utilisation over 5 minute
Legend3[PIX01-1]: Maximal CPU utilisation over 1 minute
Legend4[PIX01-1]: Maximal CPU utilisation over 5 minute
ShortLegend[PIX01-1]: %
PageTop[PIX01-1]: <table width="100%" border="0">
 <tr>
  <td><h2>Cisco CPU Utilisation Report</h2></td>
 </tr>
 <tr>
  <td><h3>PIX CPU</h3></td>
 </tr>
 <tr>
  <td><p>PIX :10.10.20.1</p></td>
 </tr>
 </table>

Target[PIX01-2]:
1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1.1.1.6.1:xxxstring at xxxip
MaxBytes[PIX01-2]: 1024
Title[PIX01-2]: PIX 515E MEM
PageTop[PIX01-2]: <H1>PIX01 MEM</H1>
Options[PIX01-2]: gauge, nopercent, unknaszero
YLegend[PIX01-2]: Bytes
ShortLegend[PIX01-2]: Bytes
Legend1[PIX01-2]: Free
Legend2[PIX01-2]: Used
Legend3[PIX01-2]: Max value per interval on graph
Legend4[PIX01-2]: .
LegendI[PIX01-2]: Free
LegendO[PIX01-2]: Used
Colours[PIX01-2]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[PIX01-2]: ymw


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From mwren at burnsmcd.com  Tue Jan  6 23:16:10 2004
From: mwren at burnsmcd.com (Mike Wren)
Date: Tue, 06 Jan 2004 16:16:10 -0600
Subject: [mrtg] Re: PIX Firewall
Message-ID: <sffadf58.054@gwpri.burnsmcd.com>

I use the following OIDs:
 
 for connections:  1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.6
for memory free and memory used: 
1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1.1
.1.6.1

I am using the OID's you list for CPU, but I have show them as being 1
Min and 5 Min.
 
Michael Wren
Senior Network Analyst
Burns & McDonnell Engineering
P.O. Box 419173
Kansas City, MO 64141-6173
816-822-3160
mwren at burnsmcd.com


>>> Frank Ervin <FErvin at 3dsi.com> 01/06/2004 3:30:42 PM >>>

Hello all,

I am trying to access CPU, memory, and connections on a Cisco PIX 515
E
running IOS 6.3(2).  I am able to get all interfaces by IP, so I am
assuming
(correctly??) that SNMP is enabled properly on the firewall. MRTG seems
to
run properly, all of the OIDs I have tried return nothing but zeros,
although all the traffic data is accurate (I am also successfully
using
getlog.pl to monitor servers)... I have 2 Questions:
1. Do OIDs vary between devices of the same type (i.e. can OIDs vary
from
one PIX to another)?
2. If not-- Has anyone got any OIDs that work with a PIX 515 E running
IOS
6.3(2)? 

I am unable to run GetIf in order to do an SNMP walk becuase we've no
servers with SNMP installed at our production location, and would
rather not
have to install it if at all possible because of security concerns...
Does
anyone know of a SNMP walking utility that contains it's own SNMP code
like
MRTG does?

Any other suggestions of things to look at would be greatly
appreciated.
TIA!

Frank

Here is part of my cfg:

Target[PIX01-1]:
1.3.6.1.4.1.9.9.109.1.1.1.1.4.1&1.3.6.1.4.1.9.9.109.1.1.1.1.5.1:xxxstring at xx
xip
Options[PIX01-1]: gauge,nopercent,growright,nobanner,integer
WithPeak[PIX01-1]: wmy
YLegend[PIX01-1]: Util(percent)
MaxBytes[PIX01-1]: 100
LegendI[PIX01-1]: CPU Usage (5 secs)
LegendO[PIX01-1]: CPU Usage (1 min)
Title[PIX01-1]: My PIX
Unscaled[PIX01-1]: dwmy
Legend1[PIX01-1]: CPU utilisation over 1 minute
Legend2[PIX01-1]: CPU utilisation over 5 minute
Legend3[PIX01-1]: Maximal CPU utilisation over 1 minute
Legend4[PIX01-1]: Maximal CPU utilisation over 5 minute
ShortLegend[PIX01-1]: %
PageTop[PIX01-1]: <table width="100%" border="0">
<tr>
  <td><h2>Cisco CPU Utilisation Report</h2></td>
</tr>
<tr>
  <td><h3>PIX CPU</h3></td>
</tr>
<tr>
  <td><p>PIX :10.10.20.1</p></td>
</tr>
</table>

Target[PIX01-2]:
1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1.1.1.6.1:xxxstring at xxxip
MaxBytes[PIX01-2]: 1024
Title[PIX01-2]: PIX 515E MEM
PageTop[PIX01-2]: <H1>PIX01 MEM</H1>
Options[PIX01-2]: gauge, nopercent, unknaszero
YLegend[PIX01-2]: Bytes
ShortLegend[PIX01-2]: Bytes
Legend1[PIX01-2]: Free
Legend2[PIX01-2]: Used
Legend3[PIX01-2]: Max value per interval on graph
Legend4[PIX01-2]: .
LegendI[PIX01-2]: Free
LegendO[PIX01-2]: Used
Colours[PIX01-2]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[PIX01-2]: ymw


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From RDOVER at bclc.com  Tue Jan  6 23:53:37 2004
From: RDOVER at bclc.com (Rob Dover)
Date: Tue, 6 Jan 2004 14:53:37 -0800 
Subject: [mrtg] Newbie question - multiple cfg.files
Message-ID: <324FD33D0EF6D511BAC100508B0CBBCD242ADD@svk02.bclc.com>

Can someone clue me in on how to run mrtg with multiple cfg files? 

/usr/bin/mrtg file1.cfg file2.cfg file3.cfg 

only produces data for file1.cfg. Maybe I'm blind but I have looked through the doc and can't find any info on how to do this other than it is recommended when running rrdtool. I am running mrtg 2.9.17 and rrdtool 1.0.45 on RH 9.0 
Thanks -Rob-


This message is confidential and is intended only for the individual named. It may contain privileged information. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Any unauthorized disclosure is strictly prohibited. If you receive this e-mail in error, please notify the sender immediately and delete this e-mail from your system.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From William.Owen at ProfilesInternational.com  Tue Jan  6 23:58:11 2004
From: William.Owen at ProfilesInternational.com (William Owen)
Date: Tue, 6 Jan 2004 16:58:11 -0600 
Subject: [mrtg] Re: Newbie question - multiple cfg.files
Message-ID: <B1614B3FC265554DADE169EE8146665E018B877C@piexchange1.piicorp.org>

I use one master config file that calls all my individuals.  You can put all
your global configs in the master.

Master.cfg:

##### change dirs as needed versions etc etc ####

PathAdd: D:\mrtg\mrtg-2.10.5\bin
PathAdd: D:\mrtg\rrdtool-1.0.45\perl-shared\
PathAdd: D:\MRTG\rrdtool-1.0.45\src\tool_release
LibAdd: D:\mrtg\mrtg-2.10.5\bin

###### the rest of your cfg file here #####
LogFormat: rrdtool

HTMLDir: D:\MRTG\Data\HTMLDir
ImageDir: D:\MRTG\Data\ImageDir
LogDir: D:\MRTG\Data\LogDir
Refresh: 300
Interval: 5

Colours[_]: GREEN#00eb0c,BLUE#0000ff,IVORY#FFFF82,BLACK#000000

##########################Begin Individual Files########################

Include: D:\MRTG\Configs\Devices\localhost.cfg

Include: D:\MRTG\COnfigs\Devices\test.cfg


---EOF---

-----Original Message-----
From: Rob Dover [mailto:RDOVER at bclc.com] 
Sent: Tuesday, January 06, 2004 4:54 PM
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Newbie question - multiple cfg.files

Can someone clue me in on how to run mrtg with multiple cfg files? 

/usr/bin/mrtg file1.cfg file2.cfg file3.cfg 

only produces data for file1.cfg. Maybe I'm blind but I have looked through
the doc and can't find any info on how to do this other than it is
recommended when running rrdtool. I am running mrtg 2.9.17 and rrdtool
1.0.45 on RH 9.0 
Thanks -Rob-


This message is confidential and is intended only for the individual named.
It may contain privileged information. If you are not the named addressee
you should not disseminate, distribute or copy this e-mail. Any unauthorized
disclosure is strictly prohibited. If you receive this e-mail in error,
please notify the sender immediately and delete this e-mail from your
system.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From CihanS at garanti.com.tr  Wed Jan  7 10:10:52 2004
From: CihanS at garanti.com.tr (CihanS at garanti.com.tr)
Date: Wed, 7 Jan 2004 11:10:52 +0200
Subject: [mrtg] zero values in the log..
Message-ID: <5FA6F2E719F6C04FAD76837E84929C34047DDC3B@gtiexc5.fw.teknoloji.com.tr>


I am trying to sum up my interfaces. But I get zeros once in a while, my cfg is below...Also I pasted a part of my log file...any idea what could be wrong...This started after I moved to 2.10.11...

WorkDir: /export/home/MRTG/internet3

Options[_]: bits,unknaszero
XSize[_]: 550
YSize[_]: 250
YTics[_]: 10
Withpeak[_]: ym
Interval: 6

#----TOPLAM FR-------------------------------------

Target[toplam2]: \Serial4/1/0:hawai at 194.29.214.2:::::1 + \Hssi1/0/0.1:hawai at 194.29.214.2:::::1 + \Hssi1/0/1.1:hawai at 194.29.214.2:::::1 + \Serial5/1/0\:1:hawai at 194.29.214.2:::::1 + \Serial5/1/1\:1:hawai at 194.29.214.2:::::1 +  \Serial5/1/2\:1:hawai at 194.29.214.2:::::1+ \Serial5/1/3\:1:hawai at 194.29.214.2:::::1 + \Serial5/1/4\:1:hawai at 194.29.214.2:::::1 + \Serial5/1/6\:1:hawai at 194.29.214.2:::::1 + Serial5/1/7\:1:hawai at 194.29.214.2:::::1
Maxbytes[toplam2]: 5636096
AbsMax[toplam2]: 10000000
#AbsMax[toplam2]: 7210000
Title[toplam2]: TOTAL INTERNET TRAFFIC Gartek-2
PageTop[toplam2]: <H1><CENTER>Total Traffic Gartek-2
 </H1><H2>(Taide,TTnetKAD,Bnet,TurkNet,NetOne,TIX*2,DOL,Doruk)</CENTER></H2>
 <TABLE>
   <TR><TD>System:</TD><TD>Gartek-2 toplam </TD></TR>
   <TR><TD>Maintainer:</TD><TD></TD></TR>
   <TR><TD>IP:</TD><TD>Gartek-2 ALL Interfaces</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>43.0 Mbits/s in 39.0 Mbits/s out</TD></TR>
  </TABLE>


My log,

1073466366 25417838142 10551032386
1073466366 1231667 2587192 1231667 2587192
1073466006 1202004 0 1202004 0
1073466000 1202004 0 1202004 0
1073465700 1239329 2138382 1246975 2576364
1073465400 1175939 2599905 1246975 2614539
1073465100 1141592 1533862 1155518 2614539
1073464800 1153538 549258 1155518 2535041
1073464500 1146515 2541116 1150021 2700724
1073464200 1150021 2700724 1150021 2700724

***********************************************************
Cihan SUBASI
Garanti Technology
Internet ve Yazilim Hizmetleri
Tel:(90)(212)4783426 GSM:(90)(533)(2750353)
Fax:(90)(212)6576150
http://www.garantitechnology.com <http://www.garantitechnology.com/>
mailto:cihans at garanti.com.tr
Success is a wonderful thing, but never underestimate the value of failure.
Failure teaches many more things than success ever can.
***********************************************************




This message and attachments are confidential and intended solely for the individual(s) stated in this
message.If you received this message although you are not the addressee you are responsible to keep the
message confidential .The sender has no responsibility for the accuracy or correctness of the
information in the message and its attachments.Our company shall have no liability for any changes
or late receiving,loss of integrity and confidentiality,viruses and any damages caused in
anyway to your computer system.

Bu mesaj ve ekleri mesajda gonderildigi belirtilen kisi/kisilere ozeldir ve gizlidir.Bu mesajin muhatabi
olmamaniza ragmen tarafiniza ulasmis olmasi halinde mesaj iceriginin gizliligi ve bu gizlilik yukumlulugune
uyulmasi zorunlulugu tarafiniz icin de soz konusudur.Mesaj ve eklerinde yer alan bilgilerin dogrulugu ve
guncelligi konusunda gonderenin ya da sirketimizin herhangi bir sorumlulugu bulunmamaktadir.Sirketimiz
mesajin ve bilgilerinin size degisiklige ugrayarak veya gec ulasmasindan, butunlugunun ve gizliliginin
korunamamasindan, virus icermesinden ve bilgisayar sisteminize verebilecegi herhangi bir zarardan
sorumlu tutulamaz.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From simon.strutt at thomson.com  Wed Jan  7 13:01:28 2004
From: simon.strutt at thomson.com (Strutt, Simon)
Date: Wed, 7 Jan 2004 12:01:28 -0000 
Subject: [mrtg] Stopping CFGMaker comment out zero byte interfaces ?
Message-ID: <593B8AD58C99D511ABD900062939CB41021AB55D@tfukwokmsg01.datastream.com>

I've got a new network switch with 100's of ports which I want to monitor
with MRTG.  When I run the CFGmaker it comments out the ports because
they're not being used yet (the switch returns state=down speed=0,
state=down is overridden by --show-op-down, but speed=0 can't be overridden,
even if the port speed is hardset to 100 on the switch, it still returns
speed of 0 bytes as its not up yet).
Is there a way to force the CFGmaker to use 100M for MaxBytes regardless of
whats returned by the switch, and so stop it commenting out the interface?
(Rather than recreating the cfg file each time a new port is used, or
editing the cfg file to remove the #'s, or for that matter a quick bit of
script that can uncomment interfaces).

Regards
Simon


"This communication is intended solely for the addressee and is confidential and not for third party unauthorised distribution."



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From cadams at hsn.com  Wed Jan  7 13:28:44 2004
From: cadams at hsn.com (Adams,  Chris)
Date: Wed, 7 Jan 2004 07:28:44 -0500
Subject: [mrtg] Re: PIX Firewall
Message-ID: <C4C20BF604294148BF99698A2EC81EB9018FD91A@ecexchg01.hsn.com>

I would love to take a look at your script if you don't mind.

Thanks

Chris Adams
Systems Engineer II
HSN.com
(727) 872-5633


-----Original Message-----
From: Keith E Johnson [mailto:kj at sunclipse.com] 
Sent: Tuesday, January 06, 2004 5:06 PM
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Re: PIX Firewall


Your CPU Config is fine, but you need to move the maxbytes up to atleat
64MB depending on how much memory you have.


The current connections OID is 1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.6

I have a script that grabs all kinds of other stats if you want it...
CPU Conn - Current Conn - TCP Conn - UDP Fixup - FTP Fixup - HTTP Fixup
- TCP Xlate - Current Memory Authenticated users

Keith Johnson 
LAN Administrator 
Amcor Sunclipse North America 
6600 Valley View Street, Buena Park, CA 90620 
Voice: 714.562.6179 Fax: 714.562.2036 
Email: keith.johnson at sunclipse.com 

-----Original Message-----
From: Frank Ervin [mailto:FErvin at 3dsi.com] 
Sent: Tuesday, January 06, 2004 1:31 PM
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] PIX Firewall

Hello all,

I am trying to access CPU, memory, and connections on a Cisco PIX 515 E
running IOS 6.3(2).  I am able to get all interfaces by IP, so I am
assuming
(correctly??) that SNMP is enabled properly on the firewall. MRTG seems
to run properly, all of the OIDs I have tried return nothing but zeros,
although all the traffic data is accurate (I am also successfully using
getlog.pl to monitor servers)... I have 2 Questions: 1. Do OIDs vary
between devices of the same type (i.e. can OIDs vary from one PIX to
another)? 2. If not-- Has anyone got any OIDs that work with a PIX 515 E
running IOS 6.3(2)? 

I am unable to run GetIf in order to do an SNMP walk becuase we've no
servers with SNMP installed at our production location, and would rather
not have to install it if at all possible because of security
concerns... Does anyone know of a SNMP walking utility that contains
it's own SNMP code like MRTG does?

Any other suggestions of things to look at would be greatly appreciated.
TIA!

Frank

Here is part of my cfg:

Target[PIX01-1]:
1.3.6.1.4.1.9.9.109.1.1.1.1.4.1&1.3.6.1.4.1.9.9.109.1.1.1.1.5.1:xxxstrin
g at xx
xip
Options[PIX01-1]: gauge,nopercent,growright,nobanner,integer
WithPeak[PIX01-1]: wmy
YLegend[PIX01-1]: Util(percent)
MaxBytes[PIX01-1]: 100
LegendI[PIX01-1]: CPU Usage (5 secs)
LegendO[PIX01-1]: CPU Usage (1 min)
Title[PIX01-1]: My PIX
Unscaled[PIX01-1]: dwmy
Legend1[PIX01-1]: CPU utilisation over 1 minute
Legend2[PIX01-1]: CPU utilisation over 5 minute
Legend3[PIX01-1]: Maximal CPU utilisation over 1 minute
Legend4[PIX01-1]: Maximal CPU utilisation over 5 minute
ShortLegend[PIX01-1]: %
PageTop[PIX01-1]: <table width="100%" border="0">
 <tr>
  <td><h2>Cisco CPU Utilisation Report</h2></td>
 </tr>
 <tr>
  <td><h3>PIX CPU</h3></td>
 </tr>
 <tr>
  <td><p>PIX :10.10.20.1</p></td>
 </tr>
 </table>

Target[PIX01-2]:
1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1.1.1.6.1:xxxstring at xxxi
p
MaxBytes[PIX01-2]: 1024
Title[PIX01-2]: PIX 515E MEM
PageTop[PIX01-2]: <H1>PIX01 MEM</H1>
Options[PIX01-2]: gauge, nopercent, unknaszero
YLegend[PIX01-2]: Bytes
ShortLegend[PIX01-2]: Bytes
Legend1[PIX01-2]: Free
Legend2[PIX01-2]: Used
Legend3[PIX01-2]: Max value per interval on graph
Legend4[PIX01-2]: .
LegendI[PIX01-2]: Free
LegendO[PIX01-2]: Used
Colours[PIX01-2]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[PIX01-2]: ymw


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Wed Jan  7 13:33:04 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Wed, 7 Jan 2004 13:33:04 +0100
Subject: [mrtg] Re: Stopping CFGMaker comment out zero byte interfaces ?
In-Reply-To: <593B8AD58C99D511ABD900062939CB41021AB55D@tfukwokmsg01.datastream.com>; from simon.strutt@thomson.com on Wed, Jan 07, 2004 at 12:01:28PM -0000
References: <593B8AD58C99D511ABD900062939CB41021AB55D@tfukwokmsg01.datastream.com>
Message-ID: <20040107133304.A3995@slot.hollandcasino.net>

On Wed, Jan 07, 2004 at 12:01:28PM -0000, Strutt, Simon wrote:

> Is there a way to force the CFGmaker to use 100M for MaxBytes regardless of
> whats returned by the switch, and so stop it commenting out the interface?
> (Rather than recreating the cfg file each time a new port is used, or
> editing the cfg file to remove the #'s, or for that matter a quick bit of
> script that can uncomment interfaces).

In stead of hacking the output, why not hack cfgmaker itself?

To get what you want:
   # Do some futher investigation if the interface makes
   # sense to collect on

   if ($$i{ifSpeed} == 0) {
      push @prob, "has a speed of $$i{ifSpeed} which makes no sense";
                 $if_ok = 0;
   }

   This test is causing you problems.  Skip it.  

To get what you ask for:
   Just after ifSpeed is set, override it.

   I'm not fluent in perl but I think it is in sub InterfaceInfo,
   adjust it just above the line saying
      "magic speed determination for portmaster IFs"
   
HTH
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From simon.westlake at bizwi.rr.com  Wed Jan  7 15:38:03 2004
From: simon.westlake at bizwi.rr.com (Simon Westlake)
Date: Wed, 07 Jan 2004 08:38:03 -0600
Subject: [mrtg] Example of graph not generating correctly below 0
Message-ID: <200401070838030674.60111E9F@smtp.biz.rr.com>

By tuning the .rrd files, I can get MRTG to display current, avg and max negative values. However, the graphs are still not generated properly. Here is an example.

http://24.123.87.13/img/misgraphed.png

This is a value of -3.7.

Apparently, others have got graphs to generate below 0. I've tried different MRTG versions, deleting the graphics and letting them be re-generated, tuning the rrd files the instant they are created and various other things, and the same thing happens.

I'd really like to fix this :)


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Wed Jan  7 15:49:00 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Wed, 7 Jan 2004 15:49:00 +0100
Subject: [mrtg] Re: Example of graph not generating correctly below 0
In-Reply-To: <200401070838030674.60111E9F@smtp.biz.rr.com>; from simon.westlake@bizwi.rr.com on Wed, Jan 07, 2004 at 08:38:03AM -0600
References: <200401070838030674.60111E9F@smtp.biz.rr.com>
Message-ID: <20040107154900.A4719@slot.hollandcasino.net>

On Wed, Jan 07, 2004 at 08:38:03AM -0600, Simon Westlake wrote:
> By tuning the .rrd files, I can get MRTG to display current, avg and max
> negative values. However, the graphs are still not generated properly.
> Here is an example.
> 

<80 chars line length please, thank you.

> http://24.123.87.13/img/misgraphed.png
> 
> This is a value of -3.7.

Are you *sure* about this?  No offence, but most errors turn out to
be configuration issues.  Your problem could be that you are displaying
-0.37 dB ...  or you aren't using GAUGE where you should use it.

> Apparently, others have got graphs to generate below 0. I've tried different
> MRTG versions, deleting the graphics and letting them be re-generated, tuning
> the rrd files the instant they are created and various other things, and the
> same thing happens.
> 
> I'd really like to fix this :)

First find out where the problem is.  Check the input to MRTG,
check the input to RRDtool,  check the contents of the RRD,
check properties of the RRD (such as min and max values, see
the "rrdtool tune" command).

Next thing to do is to provide information to this list.
"It doesn't work" is not good enough.

Best is to write a small example (the smallest that works) that
demonstrates the problem.  Include all relevant information,
including the mrtg config file and the script that feeds data to
MRTG.  Make sure you are using a data source that can be reproduced,
a script called from the external program interface would be nice.

HTH
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From simon.westlake at bizwi.rr.com  Wed Jan  7 16:03:17 2004
From: simon.westlake at bizwi.rr.com (Simon Westlake)
Date: Wed, 07 Jan 2004 09:03:17 -0600
Subject: [mrtg] Re: Example of graph not generating correctly
  below 0
In-Reply-To: <20040107154900.A4719@slot.hollandcasino.net>
References: <200401070838030674.60111E9F@smtp.biz.rr.com>
 <20040107154900.A4719@slot.hollandcasino.net>
Message-ID: <200401070903170471.602837E4@smtp.biz.rr.com>

>On Wed, Jan 07, 2004 at 08:38:03AM -0600, Simon Westlake wrote:
>> By tuning the .rrd files, I can get MRTG to display current, avg and max
>> negative values. However, the graphs are still not generated properly.
>> Here is an example.
>> 
>
><80 chars line length please, thank you.
>
>> http://24.123.87.13/img/misgraphed.png
>> 
>> This is a value of -3.7.
>
>Are you *sure* about this?  No offence, but most errors turn out to
>be configuration issues.  Your problem could be that you are displaying
>-0.37 dB ...  or you aren't using GAUGE where you should use it.
>

Well, below the graph MRTG says 'Current: -3.7dB' so I'm assuming it's graphing
the same value it's displaying as current. The value is actually returned as -37, I'm
dividing by 10. Is there a reason MRTG would graph a value other than what it
displays as current?

I'm using gauge - here's a quick example of the important parts of configuration file 
that's pulling the data.

Options[target]: growright,nobanner,nolegend,nopercent,gauge
Unscaled[target]: dwmy
Maxbytes[target]: 60
Target[target]: downstreamOID&downstreamOID:snmpkey at target / 10

The data is being pulled from a cable modem. The reason I didn't think it was
an .rrd issue is that MRTG is displaying, correctly, avg, current and max
values. 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From RDOVER at bclc.com  Wed Jan  7 17:17:36 2004
From: RDOVER at bclc.com (Rob Dover)
Date: Wed, 7 Jan 2004 08:17:36 -0800 
Subject: [mrtg] Re: Newbie question - multiple cfg.files
Message-ID: <324FD33D0EF6D511BAC100508B0CBBCD242ADF@svk02.bclc.com>

Thanks William.
That is exactly what I was looking for.
-Rob-

-----Original Message-----
From: William Owen [mailto:William.Owen at ProfilesInternational.com] 
Sent: Tuesday, January 06, 2004 2:58 PM
To: Rob Dover; 'mrtg at list.ee.ethz.ch'
Subject: RE: [mrtg] Newbie question - multiple cfg.files

I use one master config file that calls all my individuals.  You can put all
your global configs in the master.

Master.cfg:

##### change dirs as needed versions etc etc ####

PathAdd: D:\mrtg\mrtg-2.10.5\bin
PathAdd: D:\mrtg\rrdtool-1.0.45\perl-shared\
PathAdd: D:\MRTG\rrdtool-1.0.45\src\tool_release
LibAdd: D:\mrtg\mrtg-2.10.5\bin

###### the rest of your cfg file here #####
LogFormat: rrdtool

HTMLDir: D:\MRTG\Data\HTMLDir
ImageDir: D:\MRTG\Data\ImageDir
LogDir: D:\MRTG\Data\LogDir
Refresh: 300
Interval: 5

Colours[_]: GREEN#00eb0c,BLUE#0000ff,IVORY#FFFF82,BLACK#000000

##########################Begin Individual Files########################

Include: D:\MRTG\Configs\Devices\localhost.cfg

Include: D:\MRTG\COnfigs\Devices\test.cfg


---EOF---

-----Original Message-----
From: Rob Dover [mailto:RDOVER at bclc.com] 
Sent: Tuesday, January 06, 2004 4:54 PM
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Newbie question - multiple cfg.files

Can someone clue me in on how to run mrtg with multiple cfg files? 

/usr/bin/mrtg file1.cfg file2.cfg file3.cfg 

only produces data for file1.cfg. Maybe I'm blind but I have looked through
the doc and can't find any info on how to do this other than it is
recommended when running rrdtool. I am running mrtg 2.9.17 and rrdtool
1.0.45 on RH 9.0 
Thanks -Rob-


This message is confidential and is intended only for the individual named.
It may contain privileged information. If you are not the named addressee
you should not disseminate, distribute or copy this e-mail. Any unauthorized
disclosure is strictly prohibited. If you receive this e-mail in error,
please notify the sender immediately and delete this e-mail from your
system.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


This message is confidential and is intended only for the individual named. It may contain privileged information. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Any unauthorized disclosure is strictly prohibited. If you receive this e-mail in error, please notify the sender immediately and delete this e-mail from your system.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From kdonahoe at dreamtank.com  Wed Jan  7 22:03:37 2004
From: kdonahoe at dreamtank.com (Kevin Donahoe)
Date: Wed, 7 Jan 2004 13:03:37 -0800
Subject: [mrtg] problem setting up mrtg to read hp procurve 4000m
Message-ID: <C03FCC7D8C9936469156C7998486114E56DD@aknot.corp.dreamtank.com>

Could someone please clue me in on how to set up mrtg to get data from a
procurve 4000m?
 
Thanks
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jon at jonsippel.com  Wed Jan  7 22:41:53 2004
From: jon at jonsippel.com (Jon Sippel)
Date: Wed, 07 Jan 2004 16:41:53 -0500
Subject: [mrtg] value lost between snmp and mrtg
Message-ID: <3FFC7D21.4090509@jonsippel.com>

I've got a Falcon Environmental Monitor that I want to track (temp, 
humidity) via mrtg.  On my mrtg host, I am able to retreive the expected 
values with an snmpget command:

snmpget -c public -v1 -m /usr/share/snmp/mibs/Falcon8.txt falcon 
falconInput1Reading.0
RLE-FALCON-MIB::falconInput1Reading.0 = INTEGER: 74

However, through MRTG (.cfg file below) I only get values of 0.  The 
same thing happens if I use the actual OID string 
(1.3.6.1.4.1.3184.1.1.1.3.2.2.0).  Any ideas?

Thanks,
Jon Sippel

falcontemp.cfg:
WorkDir: /var/www/mrtg
LoadMibs: /usr/share/snmp/mibs/Falcon8.txt
Target[falcon_temp]: 
falconInput1Reading.0&falconInput1Reading.0:public at falcon
RouterUptime[falcon_temp]: public at falcon
MaxBytes[falcon_temp]: 100
Title[falcon_temp]: NOC temperature
PageTop[falcon_temp]: <H1>NOC temperature</H1>
Unscaled[falcon_temp]: ymwd
ShortLegend[falcon_temp]: F
YLegend[falcon_temp]: NOC Temperature
Legend1[falcon_temp]: Temperature in F
Legend2[falcon_temp]:
Legend3[falcon_temp]:
Legend4[falcon_temp]:
LegendI[falcon_temp]: Temp
LegendO[falcon_temp]:
Options[falcon_temp]: growright,nopercent



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Greg.Volk at edwardjones.com  Wed Jan  7 23:07:07 2004
From: Greg.Volk at edwardjones.com (Greg.Volk at edwardjones.com)
Date: Wed, 07 Jan 2004 16:07:07 -0600
Subject: [mrtg] Cfgmaker template for monitoring cisco ipsec tunnels with MRTG
Message-ID: <H0005fe90bae97ee.1073513226.nspdmail-1.edwardjones.com*@MHS>

I put together a new cfgmaker template that will produce
MRTG configs for monitoring ipsec tunnel stats on cisco 
devices. The OIDs were pulled from the 
CISCO-IPSEC-FLOW-MONITOR mib and include the following 
stats:
IPsec & IKE Active Tunnels
Bit rate for all IPsec phase-2 tunnels
Packet rate for all IPsec phase-2 tunnels
Crypto operations/sec for all IPsec phase-2 tunnels
Bit rate for all IKE tunnels
Packet rate for all IKE tunnels
Packet drop rate for all IKE tunnels

The template can be downloaded from http://mrtg.gvolk.com.


-- Attached file removed by Ecartis and put at URL below --
-- Type: application/ms-tnef
-- Size: 1k (1833 bytes)
-- URL : http://www.ee.ethz.ch/~slist/p/69-WINMAIL.DAT


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From oetiker at ee.ethz.ch  Thu Jan  8 00:54:00 2004
From: oetiker at ee.ethz.ch (Tobias Oetiker)
Date: Thu, 8 Jan 2004 00:54:00 +0100 (MET)
Subject: [mrtg] [mrtg-announce] MRTG 2.10.12 is out
Message-ID: <Pine.GSO.4.58.0401080052220.19423@abin.rr.rgum.pu>

Folks,

I have released mrtg 2.10.12. Available from

http://people.ee.ethz.ch/~oetiker/webtools/mrtg/pub

Changes 2.10.12
---------------
From: Nico Kadel-Garcia <nkadel at merl.com>
* Makefile should not complain when running clean on a clean setup
* It's community not comunity.

From: Luc Pauwels <Luc.Pauwels at xalasys.com> and Simon Leinen
* 16-Bit SNMP Session ID support for cfgmaker and SNMP_Session

From: Tobi
* renamed all doc pages to mrtg-* except the manpages for cfgmaker and indexmaker
* added MaxAge option setting which will prevent mrtg from touching old logfiles,
  potentially caused by setting the clock to a wrong date.
* fixed a number of && vs and and || vs or problems in the mrtg script and library



-- 
 ______    __   _
/_  __/_  / /  (_) Oetiker @ ISG.EE, ETZ J97, ETH, CH-8092 Zurich
 / // _ \/ _ \/ /  System Manager, Time Lord, Coder, Designer, Coach
/_/ \.__/_.__/_/   http://people.ee.ethz.ch/~oetiker   +41(0)1-632-5286

--
Unsubscribe mailto:mrtg-announce-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-announce-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg-announce
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From ugo at ambrosa.it  Thu Jan  8 09:10:15 2004
From: ugo at ambrosa.it (Ugo)
Date: Thu, 8 Jan 2004 09:10:15 +0100 (CET)
Subject: [mrtg] 3Com 4226T Switch (mod.3C17300)
Message-ID: <1314.213.155.203.33.1073549415.squirrel@webmail.goweb.it>

Hi.
I use MRTG since 2 years without problem.
I've installed it in every Linux servers in my rack with a 'per server'
basis mrtg configuration.
I check CPU, Memory, Traffic and other useful infos with Perl script made
by me.
I use a simple 16 port switch (without SNMP, it's a unmanaged switch) so 
for traffic I use a my script with a simple configuration of IPTABLES for
every server and it works very fine.

Now I want a better monitoring for traffic and I want to buy a medium cost
managed switch with SNMP so I can monitoring the traffic for a "per port
switch" basis, removing my iptables script in my servers.

I've a special offer for "3Com SuperStack 3 Switch 4226T 24-Port Plus 2
10/100/1000, mod. 3C17300". I've not a big network load, so the
performance of this switch are ok for me.
The docs for this switch report:
  SNMP Protocol (RFC 1157)
  MIB-II (RFC 1213)
  Bridge MIB (RFC 1493)
  RMON MIB II (RFC2021)
  Remote Monitoring MIB (RFC 1757)
  Interface MIB (2233)
  MAU MIB (RFC 2668)

I've NEVER used SNMP with MRTG so I've doubts.
Has anyone used this switch with mrtg ? Before buy it, I want be sure that
there is no problem with mrtg and I can monitoring every port.

Thanks for your suggestions.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From JKoelstra at MINSZW.NL  Thu Jan  8 09:22:07 2004
From: JKoelstra at MINSZW.NL (Koelstra, J. (Jan))
Date: Thu, 8 Jan 2004 09:22:07 +0100
Subject: [mrtg] Re: value lost between snmp and mrtg
Message-ID: <E22D26B0F1E69D4188EE2BE56D26EB6B0AB753@MAILCL0102.MINSZW.NL>

Jon,

Since temperature is not a rate but a value you need to add 'gauge' at 
the options line.

Hth.

Jan

-----Original Message-----
From: Jon Sippel [mailto:jon at jonsippel.com] 
Sent: Wednesday, January 07, 2004 10:42 PM
To: mrtg
Subject: [mrtg] value lost between snmp and mrtg


I've got a Falcon Environmental Monitor that I want to track (temp, 
humidity) via mrtg.  On my mrtg host, I am able to retreive the expected

values with an snmpget command:

snmpget -c public -v1 -m /usr/share/snmp/mibs/Falcon8.txt falcon 
falconInput1Reading.0
RLE-FALCON-MIB::falconInput1Reading.0 = INTEGER: 74

However, through MRTG (.cfg file below) I only get values of 0.  The 
same thing happens if I use the actual OID string 
(1.3.6.1.4.1.3184.1.1.1.3.2.2.0).  Any ideas?

Thanks,
Jon Sippel

falcontemp.cfg:
WorkDir: /var/www/mrtg
LoadMibs: /usr/share/snmp/mibs/Falcon8.txt
Target[falcon_temp]: 
falconInput1Reading.0&falconInput1Reading.0:public at falcon
RouterUptime[falcon_temp]: public at falcon
MaxBytes[falcon_temp]: 100
Title[falcon_temp]: NOC temperature
PageTop[falcon_temp]: <H1>NOC temperature</H1>
Unscaled[falcon_temp]: ymwd
ShortLegend[falcon_temp]: F
YLegend[falcon_temp]: NOC Temperature
Legend1[falcon_temp]: Temperature in F
Legend2[falcon_temp]:
Legend3[falcon_temp]:
Legend4[falcon_temp]:
LegendI[falcon_temp]: Temp
LegendO[falcon_temp]:
Options[falcon_temp]: growright,nopercent



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. 
Aan dit bericht kunnen geen rechten worden ontleend. 

Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van het bericht te vernietigen. 
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt. 
This message shall not constitute any obligations.

This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and delete its content.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From bilal at it-pro.net  Thu Jan  8 11:38:22 2004
From: bilal at it-pro.net (Bilal Dar)
Date: Thu, 8 Jan 2004 13:38:22 +0300
Subject: [mrtg] %age problem
Message-ID: <001501c3d5d3$8bf7bb70$281e10ac@dar>

Hi,
I have a 256k shared wan link, there was no  bandwidth command so somehow mrtg took the max speed as 193kBytes. Now the problem is 

      Max  Out: 232.3 kb/s (15.0%)   Average  Out: 51.4 kb/s (3.3%)   Current  Out: 19.3 kb/s (1.3%)  


the link utilization is over 80% how can i fix this problem?

And i also want to know how to configure mrtg for monitoring router memory and cpu as well.

Thanks
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From mammali at horizon-satellite.com  Thu Jan  8 11:58:40 2004
From: mammali at horizon-satellite.com (Muhammed Ali)
Date: Thu, 8 Jan 2004 13:58:40 +0300
Subject: [mrtg] Re: %age problem
In-Reply-To: <001501c3d5d3$8bf7bb70$281e10ac@dar>
Message-ID: <000201c3d5d6$63e9f320$098acd52@mammalilaptop>

Change Maxbytes to 32000


Regards
Muhammed Ali

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Bilal Dar
Sent: Thursday, January 08, 2004 1:38 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] %age problem

Hi,
I have a 256k shared wan link, there was no  bandwidth command so somehow
mrtg took the max speed as 193kBytes. Now the problem is 

      Max  Out: 232.3 kb/s (15.0%)   Average  Out: 51.4 kb/s (3.3%)
Current  Out: 19.3 kb/s (1.3%)  


the link utilization is over 80% how can i fix this problem?

And i also want to know how to configure mrtg for monitoring router memory
and cpu as well.

Thanks
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Ruben.Montes at eu.didata.com  Thu Jan  8 12:05:13 2004
From: Ruben.Montes at eu.didata.com (Ruben Montes)
Date: Thu, 8 Jan 2004 12:05:13 +0100
Subject: [mrtg] Maxbytes general deployment
Message-ID: <EE0904442B13B640BBBABFA1649E665F0388DF@eudefrasvex01.eu.didata.local>

 Hello all,
Are there any rules when inserting the value of Maxbytes? Has anybody
have a table with the relation between the speed of the link and the
value of Maxbytes?

Many thanks and best regards,

Rub?n Montes



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From mammali at horizon-satellite.com  Thu Jan  8 12:09:59 2004
From: mammali at horizon-satellite.com (Muhammed Ali)
Date: Thu, 8 Jan 2004 14:09:59 +0300
Subject: [mrtg] Re: Maxbytes general deployment
In-Reply-To: <EE0904442B13B640BBBABFA1649E665F0388DF@eudefrasvex01.eu.didata.local>
Message-ID: <000501c3d5d7$f8c6aa00$098acd52@mammalilaptop>

Speed of the link usually specify as kbits while maxbytes as bytes, 8
bits=1bytes,,,, so if you have link of 128K, max byte will be 128/8=16K ie,
maxbyte: 16000 

Regards
Muhammed Ali

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Ruben Montes
Sent: Thursday, January 08, 2004 2:05 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Maxbytes general deployment

 Hello all,
Are there any rules when inserting the value of Maxbytes? Has anybody
have a table with the relation between the speed of the link and the
value of Maxbytes?

Many thanks and best regards,

Rub?n Montes



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Ruben.Montes at eu.didata.com  Thu Jan  8 12:10:56 2004
From: Ruben.Montes at eu.didata.com (Ruben Montes)
Date: Thu, 8 Jan 2004 12:10:56 +0100
Subject: [mrtg] Re: Maxbytes general deployment
Message-ID: <EE0904442B13B640BBBABFA1649E665F0388E0@eudefrasvex01.eu.didata.local>

Thanks 

-----Mensaje original-----
De: Muhammed Ali [mailto:mammali at horizon-satellite.com] 
Enviado el: jueves, 08 de enero de 2004 12:10
Para: Ruben Montes; mrtg at list.ee.ethz.ch
Asunto: RE: [mrtg] Maxbytes general deployment

Speed of the link usually specify as kbits while maxbytes as bytes, 8
bits=1bytes,,,, so if you have link of 128K, max byte will be 128/8=16K
ie,
maxbyte: 16000 

Regards
Muhammed Ali

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Ruben Montes
Sent: Thursday, January 08, 2004 2:05 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Maxbytes general deployment

 Hello all,
Are there any rules when inserting the value of Maxbytes? Has anybody
have a table with the relation between the speed of the link and the
value of Maxbytes?

Many thanks and best regards,

Rub?n Montes



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Thu Jan  8 12:22:22 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Thu, 8 Jan 2004 12:22:22 +0100
Subject: [mrtg] Re: Maxbytes general deployment
In-Reply-To: <EE0904442B13B640BBBABFA1649E665F0388DF@eudefrasvex01.eu.didata.local>; from Ruben.Montes@eu.didata.com on Thu, Jan 08, 2004 at 12:05:13PM +0100
References: <EE0904442B13B640BBBABFA1649E665F0388DF@eudefrasvex01.eu.didata.local>
Message-ID: <20040108122222.A11613@slot.hollandcasino.net>

On Thu, Jan 08, 2004 at 12:05:13PM +0100, Ruben Montes wrote:

> Are there any rules when inserting the value of Maxbytes? Has anybody
> have a table with the relation between the speed of the link and the
> value of Maxbytes?

MaxBytes should reflect the maximum speed of the link, in bytes per
second.  This is used to calculate the percentages below the graph.

If AbsMax is not present, MaxBytes also serves as the boundary for
valid rates.  Any rate above it will be considered invalid and is
thus discarded.

In short:  when MaxBytes and AbsMax are both used, MaxBytes is used to
define 100 percent and AbsMax is used to discard impossible rates.

It is not uncommon to see rates that are higher than the theoretical
limit.  These can be contributed to a couple of causes.  Mostly:
- Imperfection in the method used to measure the device
- Imperfection in the device itself

Personally I think it is best to set MaxBytes to the real maximum
on the link (convert bits to bytes by dividing by eight). Then leave
some room for larger rates by setting AbsMax to 120% of the link speed.

Of course, this all is only valid for standard setups, there may be
good reasons to do it different.

HTH
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From eurico at orbisat.com.br  Thu Jan  8 13:48:24 2004
From: eurico at orbisat.com.br (Eurico Vaz Junior)
Date: Thu, 8 Jan 2004 10:48:24 -0200
Subject: [mrtg] MRTG on RedHat 9
Message-ID: <LFELKJECPDNDIMFCGNMIAECGCKAA.eurico@orbisat.com.br>

HI all,

I need a help to configure mrtg in my redhat 9.  I have de snmpd service
running with the default configuration.  My mrtg version is 2.9.17.

If i run the command:  cfgmaker public at 127.0.0.1 > mrtg.cfg, i have the
following result:

[root at coruja mrtg]# cfgmaker public at 127.0.0.1 > mrtg.cfg
--base: Get Device Info on public at 127.0.0.1:
--base: Vendor Id:
--base: Populating confcache
--snpo: confcache public at 127.0.0.1: Descr  -->
--snpo: confcache public at 127.0.0.1: Name  -->
--snpo: confcache public at 127.0.0.1: Type  -->
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifSpeed
--base: Walking ifAdminStatus
--base: Walking ifOperStatus

And the the file mrtg.cfg:

###########################################
# Created by
# /usr/bin/cfgmaker public at 127.0.0.1


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits


######################################################################
# System: coruja
# Description: Linux coruja 2.4.20-8 #1 Thu Mar 13 17:18:24 EST 2003 i686
# Contact: Root <root at localhost> (configure /etc/snmp/snmp.local.conf)
# Location: Unknown (edit /etc/snmp/snmpd.conf)
#######################################################################


It seens that no informations are received from snmp

What should i do?

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date: 2/1/2004

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jtetca at egyptian.net  Thu Jan  8 17:47:31 2004
From: jtetca at egyptian.net (Jason Thies)
Date: Thu, 8 Jan 2004 10:47:31 -0600
Subject: [mrtg] ConfigMaker
Message-ID: <DC2D6F872DE02C46A3FBDE715814C03C901705@etcserver.etca.net>

I hopefully have a quick question regarding ConfigMaker.  If an
--if-filter rejected an interface and it comments it out in the
mrtg.xxx.cfg file, is there another filter that can be added when
running the ConfigMaker that omits that info from being added to the
configuration?  This isn't critical but when you are working on a router
with numerous interfaces and subinterfaces, the configuration can get
real bulky and difficult to work with when troubleshooting.  I have done
some reading up on it, but I have yet to be able to find such a filter.
Thanks for your help in advance.
Jason
 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From joubin2000 at yahoo.com  Thu Jan  8 19:05:27 2004
From: joubin2000 at yahoo.com (Joubin Moshrefzadeh)
Date: Thu, 8 Jan 2004 10:05:27 -0800 (PST)
Subject: [mrtg] Graphs with fixed vertical scale
Message-ID: <20040108180527.23878.qmail@web60503.mail.yahoo.com>

I'm sure someone's already asked this question, but I wasn't able to find it in the archives or on google. So here it is:
 
Is there a way to have MRTG produce graphs with the same vertical scale. i.e. for a 100 Mb interface, i want the graphs to always have a 0-100 Mbit scale, etc.
 
Thanks!
Joubin

---------------------------------
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From mrtg-admin at internetconet.net  Thu Jan  8 19:55:28 2004
From: mrtg-admin at internetconet.net (MRTG Admin)
Date: Thu, 8 Jan 2004 11:55:28 -0700
Subject: [mrtg] Specifying a range of routers
Message-ID: <003601c3d619$23d42ce0$2ab94a40@haliburton>

Hey all, this is my first post; it's good to be on the list. I have a question regarding some syntax.
I am using cfgmaker to specify about 30 snmp devices, since these devices are assigned in linear ip order can I specify 1.1.1.1 -> 1.1.1.30  with a range command or must i have each individually?

I can generate a list and direct into cfgmaker, i know, but...

-Peter

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From evan at espphotography.com  Thu Jan  8 20:04:26 2004
From: evan at espphotography.com (Evan Platt)
Date: Thu, 08 Jan 2004 11:04:26 -0800
Subject: [mrtg] Re: Graphs with fixed vertical scale
In-Reply-To: <9913985.1073559446@evan.hq.alink.net>
References: <20040108180527.23878.qmail@web60503.mail.yahoo.com>
 <9913985.1073559446@evan.hq.alink.net>
Message-ID: <10334530.1073559866@evan.hq.alink.net>

 --On Thursday, January 08, 2004 10:05 AM -0800 Joubin Moshrefzadeh
 <joubin2000 at yahoo.com> wrote:
 
> I'm sure someone's already asked this question, but I wasn't able to find
> it in the archives or on google. So here it is:  
> Is there a way to have MRTG produce graphs with the same vertical scale.
> i.e. for a 100 Mb interface, i want the graphs to always have a 0-100
> Mbit scale, etc.  
 
 <http://people.ee.ethz.ch/~oetiker/webtools/mrtg/mrtg-reference.html>
 
 See the section <Unscaled>.
 
 Evan 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From dmagnuszewski at mandtbank.com  Thu Jan  8 20:27:10 2004
From: dmagnuszewski at mandtbank.com (DANIEL MAGNUSZEWSKI)
Date: Thu, 08 Jan 2004 14:27:10 -0500
Subject: [mrtg] Re: Specifying a range of routers
Message-ID: <sffd68bf.044@mandtbank.com>

Pete, 

I just finished (last night) creating a program that I like to call "AutoMRTG", that will do just what you are asking for. 

It basically takes input from either a file or command line, creates the config file, parses it (gets rid of all commented out, unwanted interfaces, etc), adds the necessary Toptalker*name and Toptalker*group options to the cfg file (Because we use Paul Williamson and Daniel J McDonald's talker.pl script http://www.geocities.com/paulcwilliamson/mrtg/talker.html , http://www.geocities.com/mrtg_daemon/toptalkers.html ), then adds the Includes for the device config into the main MRTG config, so that you will begin polling the device ASAP.

Also, if you are using RRDTool, then it can handle RRDs. If you have many devices that for some reason or another, fairly regularly change their SNMP index (which occurs in my situation, and it's almost impossible to check thousands of devices to make sure that MRTG is polling the correct interface), it will automatically compare both your configs (old and new) and move the RRDs accordingly. This will prevent you from having to manually go through and create the config, compare the old and new config, and then manually move the RRDs to the proper name of the target. 

My next step is to have either a syslog server (or something else) automatically send a trap to the server and kick this process off whenever there is a change in config, newly discovered, or rebooted device, to ensure that the MRTG configs are in tandem with what the SNMP settings actually are on the device.

If you're able to hold off until the end of this week, beginning of next week (hopefully not even that long ;-)) Then I can try and get something available for everyone to use.

Let me know if this interests you.

Daniel Magnuszewski
CCNA
M & T Bank
dmagnuszewski at mandtbank.com

>>> "MRTG Admin" <mrtg-admin at internetconet.net> 01/08/04 01:55PM >>>
Hey all, this is my first post; it's good to be on the list. I have a question regarding some syntax.
I am using cfgmaker to specify about 30 snmp devices, since these devices are assigned in linear ip order can I specify 1.1.1.1 -> 1.1.1.30  with a range command or must i have each individually?

I can generate a list and direct into cfgmaker, i know, but...

-Peter

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://www.ee.ethz.ch/~slist/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From pam43 at georgetown.edu  Thu Jan  8 20:56:59 2004
From: pam43 at georgetown.edu (Patricia A Malinowski)
Date: Thu, 08 Jan 2004 14:56:59 -0500
Subject: [mrtg] monitoring Gig sub-interfaces on a Cisco 7513
Message-ID: <526c595291a5.5291a5526c59@imap.georgetown.edu>

Hello all,

I have searched the MRTG archive and have come across Pauls note from 12/2000, regarding monitoring sub-interfaces on a Cisco 7206.  
http://www.ee.ethz.ch/~slist/mrtg/msg09383.html
Daniel replied stating Cisco had not created mibs for sub-interface monitoring and to use CAR.  Has there been any activity or response from Cisco?  Is anyone monitoring sub interfaces on a Cisco 7000 series?  Or monitoring VLAN stats for a Gig sub-interface?  If so, can you forward the MIB and the OID you are using. 
 I would greatly appreciate any help anyone can offer!! Thanks!!
We (Georgetown University) removed our ATM connections and applied/moved to Gig.  Now my graphs are flat lining.  If anyone can shed some light on this and help, I'd greatly appreciate this.

http://www.georgetown.edu/uis/services/outages/network.status.html

Thanks.

-Patricia



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From dan.mcdonald at austinenergy.com  Thu Jan  8 22:01:40 2004
From: dan.mcdonald at austinenergy.com (Daniel J McDonald)
Date: Thu, 08 Jan 2004 15:01:40 -0600
Subject: [mrtg] Re: monitoring Gig sub-interfaces on a Cisco 7513
In-Reply-To: <526c595291a5.5291a5526c59@imap.georgetown.edu>
References: <526c595291a5.5291a5526c59@imap.georgetown.edu>
Message-ID: <1073595700.30790.217.camel@mcdonalddj-lnx.electric.ci.austin.tx.us>

On Thu, 2004-01-08 at 13:56, Patricia A Malinowski wrote:
> Hello all,
> 
> I have searched the MRTG archive and have come across Pauls note from 12/2000, regarding monitoring sub-interfaces on a Cisco 7206.  
> http://www.ee.ethz.ch/~slist/mrtg/msg09383.html
> Daniel replied stating Cisco had not created mibs for sub-interface monitoring and to use CAR.

Actually, CAR won't work, for much the same reason...  I filed a second
bug with Cisco on CAR not working.

>   Has there been any activity or response from Cisco?

Yes, they integrated this into the 12.2T train and some of the E trains.

>   Is anyone monitoring sub interfaces on a Cisco 7000 series?
I don't have one here to check.  But what version of code are you
running (on the router)?  Newer code should work fine, assuming it is
not stuck in an ancient train.

>   Or monitoring VLAN stats for a Gig sub-interface?  
Yes, on my 6500 and 3550/3750 platforms, and on Pix 525's, and...
> If so, can you forward the MIB and the OID you are using. 
same as any other - Cisco just added the ifIndex values.


> We (Georgetown University) removed our ATM connections and applied/moved to Gig.  
> Now my graphs are flat lining. 

Did you re-run cfgmaker after making the change?

-- 
Daniel J McDonald, CCIE 2495, CNX
Austin Energy


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From LLotierzo at lanacion.com.ar  Fri Jan  9 03:52:59 2004
From: LLotierzo at lanacion.com.ar (=?iso-8859-1?Q?=22Lotierzo=2C_Leandro_=28Administraci=F3n_del_Cen?= =?iso-8859-1?Q?tro_de_C=F3mputos=29=22?=)
Date: Thu, 8 Jan 2004 23:52:59 -0300 
Subject: [mrtg] Monitoring Sybase Server.
Message-ID: <A36134CC40AED311B6000008C72BE172153D84B1@mailsrv.lanacion.com.ar>


Hi all,

	I'm looking for a tool (or a script) that reads the output of a ISQL
(like sp_spaceused) and writes the data to a CSV file, so using getlog.pl
(or something like that) will create MRTG graphs of resources usage... I
know that this is hard to find but I think that I'm not the only one looking
for this.

Happy New Year for all.

Thanks in Advance.


Leandro Lotierzo
System Administrator
Diario La Nacion

Este mensaje y sus adjuntos son confidenciales y de uso exclusivo para el usuario a quien esta dirigido. Puede contener informacion amparada por el secreto profesional.
Si Ud. no es el destinatario especificado no debe copiar, enviar o utilizar ninguna parte del mismo y/o de sus adjuntos.
Las opiniones vertidas son responsabilidad del autor y no son emitidas ni avaladas por S.A. LA NACION a menos que se indique claramente lo contrario y que la identidad y autoridad del autor, para comprometer a nuestra empresa, puedan ser verificados.
No se garantiza la integridad de los mensajes enviados por e-mail ni que los mismos sean enviados en termino, o que no contengan errores o virus. El emisor no aceptara responsabilidad por los errores, modificaciones u omisiones que resulten en el mensaje, bajo la hipotesis de que pudo ser modificado.
_______________________________________________________________
Ultimas noticias en LA NACION LINE <http://www.lanacion.com.ar>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From ramudu at nmsworks.co.in  Fri Jan  9 07:39:19 2004
From: ramudu at nmsworks.co.in (Ramasamy Apathotharanan)
Date: Fri, 9 Jan 2004 12:09:19 +0530 (IST)
Subject: [mrtg] USR Total Control
Message-ID: <Pine.LNX.4.33.0401091209080.25766-100000@nmsworks.co.in>

Hi,

Where could i get the MRTG scripts for managing 3com(USR) Total Control
HiperDSP & HiperArc...

i could not find these in the contrib dir, even though search engines say
a contrib exists

thank you
-Ramudu



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From CihanS at garanti.com.tr  Fri Jan  9 10:50:08 2004
From: CihanS at garanti.com.tr (CihanS at garanti.com.tr)
Date: Fri, 9 Jan 2004 11:50:08 +0200
Subject: [mrtg] Re: zero values in the log..
Message-ID: <5FA6F2E719F6C04FAD76837E84929C34047DDC5E@gtiexc5.fw.teknoloji.com.tr>



Looks like due to the very high trsfic my counters on the routers reset themselves very quickly if I do not use snmpv2. And with v1 and uknaszero my graphs does zigzags very very often..Was is the way to resolve this problem?

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Cihan Subasi (Garanti Teknoloji)
Sent: Wednesday, January 07, 2004 11:11 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] zero values in the log..



I am trying to sum up my interfaces. But I get zeros once in a while, my cfg is below...Also I pasted a part of my log file...any idea what could be wrong...This started after I moved to 2.10.11...

WorkDir: /export/home/MRTG/internet3

Options[_]: bits,unknaszero
XSize[_]: 550
YSize[_]: 250
YTics[_]: 10
Withpeak[_]: ym
Interval: 6

#----TOPLAM FR-------------------------------------

Target[toplam2]: \Serial4/1/0:hawai at 194.29.214.2:::::1 + \Hssi1/0/0.1:hawai at 194.29.214.2:::::1 + \Hssi1/0/1.1:hawai at 194.29.214.2:::::1 + \Serial5/1/0\:1:hawai at 194.29.214.2:::::1 + \Serial5/1/1\:1:hawai at 194.29.214.2:::::1 +  \Serial5/1/2\:1:hawai at 194.29.214.2:::::1+ \Serial5/1/3\:1:hawai at 194.29.214.2:::::1 + \Serial5/1/4\:1:hawai at 194.29.214.2:::::1 + \Serial5/1/6\:1:hawai at 194.29.214.2:::::1 + Serial5/1/7\:1:hawai at 194.29.214.2:::::1
Maxbytes[toplam2]: 5636096
AbsMax[toplam2]: 10000000
#AbsMax[toplam2]: 7210000
Title[toplam2]: TOTAL INTERNET TRAFFIC Gartek-2
PageTop[toplam2]: <H1><CENTER>Total Traffic Gartek-2
 </H1><H2>(Taide,TTnetKAD,Bnet,TurkNet,NetOne,TIX*2,DOL,Doruk)</CENTER></H2>
 <TABLE>
   <TR><TD>System:</TD><TD>Gartek-2 toplam </TD></TR>
   <TR><TD>Maintainer:</TD><TD></TD></TR>
   <TR><TD>IP:</TD><TD>Gartek-2 ALL Interfaces</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>43.0 Mbits/s in 39.0 Mbits/s out</TD></TR>
  </TABLE>


My log,

1073466366 25417838142 10551032386
1073466366 1231667 2587192 1231667 2587192
1073466006 1202004 0 1202004 0
1073466000 1202004 0 1202004 0
1073465700 1239329 2138382 1246975 2576364
1073465400 1175939 2599905 1246975 2614539
1073465100 1141592 1533862 1155518 2614539
1073464800 1153538 549258 1155518 2535041
1073464500 1146515 2541116 1150021 2700724
1073464200 1150021 2700724 1150021 2700724

***********************************************************
Cihan SUBASI
Garanti Technology
Internet ve Yazilim Hizmetleri
Tel:(90)(212)4783426 GSM:(90)(533)(2750353)
Fax:(90)(212)6576150
http://www.garantitechnology.com <http://www.garantitechnology.com/>
mailto:cihans at garanti.com.tr
Success is a wonderful thing, but never underestimate the value of failure.
Failure teaches many more things than success ever can.
***********************************************************




This message and attachments are confidential and intended solely for the individual(s) stated in this
message.If you received this message although you are not the addressee you are responsible to keep the
message confidential .The sender has no responsibility for the accuracy or correctness of the
information in the message and its attachments.Our company shall have no liability for any changes
or late receiving,loss of integrity and confidentiality,viruses and any damages caused in
anyway to your computer system.

Bu mesaj ve ekleri mesajda gonderildigi belirtilen kisi/kisilere ozeldir ve gizlidir.Bu mesajin muhatabi
olmamaniza ragmen tarafiniza ulasmis olmasi halinde mesaj iceriginin gizliligi ve bu gizlilik yukumlulugune
uyulmasi zorunlulugu tarafiniz icin de soz konusudur.Mesaj ve eklerinde yer alan bilgilerin dogrulugu ve
guncelligi konusunda gonderenin ya da sirketimizin herhangi bir sorumlulugu bulunmamaktadir.Sirketimiz
mesajin ve bilgilerinin size degisiklige ugrayarak veya gec ulasmasindan, butunlugunun ve gizliliginin
korunamamasindan, virus icermesinden ve bilgisayar sisteminize verebilecegi herhangi bir zarardan
sorumlu tutulamaz.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


This message and attachments are confidential and intended solely for the individual(s) stated in this
message.If you received this message although you are not the addressee you are responsible to keep the
message confidential .The sender has no responsibility for the accuracy or correctness of the
information in the message and its attachments.Our company shall have no liability for any changes
or late receiving,loss of integrity and confidentiality,viruses and any damages caused in
anyway to your computer system.

Bu mesaj ve ekleri mesajda gonderildigi belirtilen kisi/kisilere ozeldir ve gizlidir.Bu mesajin muhatabi
olmamaniza ragmen tarafiniza ulasmis olmasi halinde mesaj iceriginin gizliligi ve bu gizlilik yukumlulugune
uyulmasi zorunlulugu tarafiniz icin de soz konusudur.Mesaj ve eklerinde yer alan bilgilerin dogrulugu ve
guncelligi konusunda gonderenin ya da sirketimizin herhangi bir sorumlulugu bulunmamaktadir.Sirketimiz
mesajin ve bilgilerinin size degisiklige ugrayarak veya gec ulasmasindan, butunlugunun ve gizliliginin
korunamamasindan, virus icermesinden ve bilgisayar sisteminize verebilecegi herhangi bir zarardan
sorumlu tutulamaz.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From list at weben.nu  Fri Jan  9 14:29:11 2004
From: list at weben.nu (Lennie)
Date: Fri, 9 Jan 2004 14:29:11 +0100
Subject: [mrtg] Monitoring use of ports in a Dell PowerConnect 3024 switch
References: <5FA6F2E719F6C04FAD76837E84929C34047DDC5E@gtiexc5.fw.teknoloji.com.tr>
Message-ID: <004101c3d6b4$97192250$1701a8c0@phonera.local>

Hello.

is that eny what heer that is using mrtg to monitoring a Dell powerConnect
3024 switch.
i want to monitoring the use of all the ports in the switch.
but i dont know whit oui i shod loke in.
and i want fins any information on the dell webpage.

// Lennie
Phonera AB
IT-Dep

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From tim.reimers at asheville.k12.nc.us  Fri Jan  9 15:04:48 2004
From: tim.reimers at asheville.k12.nc.us (Tim Reimers)
Date: Fri, 9 Jan 2004 09:04:48 -0500
Subject: [mrtg] MRTG with Dell 2650 PowerEdge
Message-ID: <000201c3d6b9$8b1fb270$b5010a0a@asheville.k12.nc.us>

Hi-

Hoping someone can help me understand something here-

I'm getting either weird values (snmpwalk/get) or no values (mrtg)
from a Dell 2650

The details:
I'm running RH80/MRTG 2.9.17-8
against a Dell 2650 running Windows 2000

The commands:

Here's the snmpget I run (snmpwalk returns the same thing)

[acslinux#]: /usr/bin/snmpget -v 1 -c <commstring <hostname>
.1.3.6.1.4.1.674.10892.1.700.20.1.6.1.2


This doesn't look much like a valid temp reading!!!
SNMPv2-SMI::enterprises.674.10892.1.700.20.1.6.1.2 = INTEGER: 330


So, I'm getting something out of SNMP on the server- I've got the right
community string, etc

Why is it not a valid temp, and why isn't MRTG graphing anything?

The MRTG cfg file:

WorkDir: /var/www/html/mrtg
# ACSTECH CPU 1 Temp
Target[acstechcpu]:
.1.3.6.1.4.1.674.10892.1.700.20.1.6.1.2&.1.3.6.1.4.1.674.10892.1.700.20.
1.6.1.2:<cstring>@<host>
XSize[acstechcpu]: 360
YSize[acstechcpu]: 75
Title[acstechcpu]: ACSTECH Processor 1 - Temperature (F)
MaxBytes[acstechcpu]: 212
AbsMax[acstechcpu]: 212
Options[acstechcpu]: growright,gauge,nopercent
PageTop[acstechcpu]: <h1>ACSTECH Processor 1 - Temperature (F)</h1>
YLegend[acstechcpu]: Deg F
ShortLegend[acstechcpu]: &deg;F
Legend1[acstechcpu]: ACSTECH CPU 1 - TEMP


This doesn't create any info in the graphs, but MRTG doesn't error out
if you run it manually either-


(this is a version of the same OID set up to convert from Celsius to
Fahrenheit, per a cfg I found online
for UPS monitoring)

Target[acstechcpu]: ( 1.3.6.1.4.1.674.10892.1.700.20.1.6.1.2 / 10 ) *
1.8 + 32


thanks, Tim


Tim Reimers
Asheville City Schools IT
tim.reimers(at)asheville(dot)k12(dot)nc(dot)us
828-255-5159
 


http://www.gordano.com - Messaging for educators.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From eurico at orbisat.com.br  Fri Jan  9 15:19:33 2004
From: eurico at orbisat.com.br (Eurico Vaz Junior)
Date: Fri, 9 Jan 2004 12:19:33 -0200
Subject: [mrtg] RES: MRTG on RedHat 9
Message-ID: <LFELKJECPDNDIMFCGNMIGEDACKAA.eurico@orbisat.com.br>

The community is public... the problem is that no information is gotten by
mrtg from snmp...
Reading more, i found a hint to insert the following line in the default
snmpd.conf that comes with redhat 9:

view     systemview    included   .1.3.6.1.2.1

and comment the other 2 view lines..

Then it started to catch some information from snmp, but only garbage..

I think the problem is in this configuration of view line.. or not??


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date: 2/1/2004

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Fri Jan  9 15:28:25 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Fri, 9 Jan 2004 15:28:25 +0100
Subject: [mrtg] Re: MRTG with Dell 2650 PowerEdge
In-Reply-To: <000201c3d6b9$8b1fb270$b5010a0a@asheville.k12.nc.us>; from tim.reimers@asheville.k12.nc.us on Fri, Jan 09, 2004 at 09:04:48AM -0500
References: <000201c3d6b9$8b1fb270$b5010a0a@asheville.k12.nc.us>
Message-ID: <20040109152825.A21774@slot.hollandcasino.net>

On Fri, Jan 09, 2004 at 09:04:48AM -0500, Tim Reimers wrote:

> This doesn't look much like a valid temp reading!!!
> SNMPv2-SMI::enterprises.674.10892.1.700.20.1.6.1.2 = INTEGER: 330

Why not?  Perhaps it is measuring tenths of a degree Celcius?

> Why is it not a valid temp, and why isn't MRTG graphing anything?

> MaxBytes[acstechcpu]: 212
> AbsMax[acstechcpu]: 212

*YOU* are discarding values over 212.  You know best why you do that.

cheers,
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From aortega at univ-wea.com  Fri Jan  9 15:50:52 2004
From: aortega at univ-wea.com (Manny Ortega)
Date: Fri, 9 Jan 2004 08:50:52 -0600 
Subject: [mrtg] Re: MRTG with Dell 2650 PowerEdge
Message-ID: <69D72311B46FD4119EF100D0B77CF7DA0855DEA4@lightning.univ-wea.com>

First, MRTG needs to graph two OID's.
Second, Dell emp readings are in Celsius x 10.
Here is a cfg file that I use for a Dell:

Target[asahi.ambient.temp]:
1.3.6.1.4.1.674.10892.1.700.20.1.6.1.1&1.3.6.1.4.1.674.10892.1.700.20.1.6.1.
5:public at 10.100.20.29 / 10 * 1.8 + 32
RouterUptime[asahi.ambient.temp]: public at 10.100.20.29
MaxBytes[asahi.ambient.temp]: 100
AbsMax[asahi.ambient.temp]: 150
Title[asahi.ambient.temp]: Ambient Temperature on Asahi
PageTop[asahi.ambient.temp]: <H1>Ambient Temperature on Asahi</H1>
	<TABLE>
		<TR><TD>System:</TD><TD>Ambient Temperature on
Asahi</TD></TR>
		<TR><TD>Maintainer:</TD><TD>Manny Ortega</TD></TR>
		<TR><TD>ESM Front I/O
Temp:</TD><TD>1.3.6.1.4.1.674.10892.1.700.20.1.6.1.1</TD></TR>
		<TR><TD>BP Bottom
Temp:</TD><TD>1.3.6.1.4.1.674.10892.1.700.20.1.6.1.5</TD></TR>
	</TABLE>

ShortLegend[asahi.ambient.temp]: ?F
YLegend[asahi.ambient.temp]: Temperature ?F
ThreshMaxI[asahi.ambient.temp]: 85
ThreshProgI[asahi.ambient.temp]: asahitemp.bat
#ThreshProgOKI[asahi.ambient.temp]: asahitempok.bat 
Legend1[asahi.ambient.temp]: ESM Front I/O Temp
Legend2[asahi.ambient.temp]: BP Bottom Temp
Legend3[asahi.ambient.temp]: Legend3
Legend4[asahi.ambient.temp]: Legend4
LegendI[asahi.ambient.temp]: &nbsp;ESM Front I/O:&nbsp;
LegendO[asahi.ambient.temp]: &nbsp;BP Bottom:&nbsp;
Options[asahi.ambient.temp]: gauge, integer, nopercent
#alt+248 for ylegend symbol

Hope that helps...

-MannyO

p.s. one important thing I've learned: If you're experimenting with config
files do not use MaxBytes or set it to 99999999 until you get data, then you
can adjust it to whatever you want...

-----Original Message-----
From: Tim Reimers [mailto:tim.reimers at asheville.k12.nc.us]
Sent: Friday, January 09, 2004 8:05 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] MRTG with Dell 2650 PowerEdge


Hi-

Hoping someone can help me understand something here-

I'm getting either weird values (snmpwalk/get) or no values (mrtg)
from a Dell 2650

The details:
I'm running RH80/MRTG 2.9.17-8
against a Dell 2650 running Windows 2000

The commands:

Here's the snmpget I run (snmpwalk returns the same thing)

[acslinux#]: /usr/bin/snmpget -v 1 -c <commstring <hostname>
.1.3.6.1.4.1.674.10892.1.700.20.1.6.1.2


This doesn't look much like a valid temp reading!!!
SNMPv2-SMI::enterprises.674.10892.1.700.20.1.6.1.2 = INTEGER: 330


So, I'm getting something out of SNMP on the server- I've got the right
community string, etc

Why is it not a valid temp, and why isn't MRTG graphing anything?

The MRTG cfg file:

WorkDir: /var/www/html/mrtg
# ACSTECH CPU 1 Temp
Target[acstechcpu]:
.1.3.6.1.4.1.674.10892.1.700.20.1.6.1.2&.1.3.6.1.4.1.674.10892.1.700.20.
1.6.1.2:<cstring>@<host>
XSize[acstechcpu]: 360
YSize[acstechcpu]: 75
Title[acstechcpu]: ACSTECH Processor 1 - Temperature (F)
MaxBytes[acstechcpu]: 212
AbsMax[acstechcpu]: 212
Options[acstechcpu]: growright,gauge,nopercent
PageTop[acstechcpu]: <h1>ACSTECH Processor 1 - Temperature (F)</h1>
YLegend[acstechcpu]: Deg F
ShortLegend[acstechcpu]: &deg;F
Legend1[acstechcpu]: ACSTECH CPU 1 - TEMP


This doesn't create any info in the graphs, but MRTG doesn't error out
if you run it manually either-


(this is a version of the same OID set up to convert from Celsius to
Fahrenheit, per a cfg I found online
for UPS monitoring)

Target[acstechcpu]: ( 1.3.6.1.4.1.674.10892.1.700.20.1.6.1.2 / 10 ) *
1.8 + 32


thanks, Tim


Tim Reimers
Asheville City Schools IT
tim.reimers(at)asheville(dot)k12(dot)nc(dot)us
828-255-5159
 


http://www.gordano.com - Messaging for educators.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From FErvin at 3dsi.com  Sat Jan 10 00:02:12 2004
From: FErvin at 3dsi.com (Frank Ervin)
Date: Fri, 9 Jan 2004 18:02:12 -0500 
Subject: [mrtg] Axis Scaling
Message-ID: <A14D65DC2664D511B61300A0CC3F163422087A@moe.3dsi.com>

Hello all,

I have modified getlog.pl to graph 404 errors per interval using the Web
Service/Total Not Found Errors perfmon counter. The problem is this:
We have contracted an independent security firm to audit our systems
monthly.  The scan results in nearly 2000 404 errors.  This makes the axis
scale so much that a slight increase in 404s is not noticable.  I would like
to keep the axis reasonable enough to notice a small number of 404s, but I
also need to keep the maxbytes total high enough where I'd be able to see
huge bursts of 404s. Is it possible to force the axis  to be  something like
this:

5000
50
25
10
0

If not, Is there a way to keep the axis small, but still "graph" points
somewhere above bounds?  Then I could at least still see the line shooting
off the top of the graph...

Thanks in advance for any assistance!

Frank Ervin
3Delta Systems
(703) 995-3937  

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Sat Jan 10 00:25:16 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Sat, 10 Jan 2004 00:25:16 +0100
Subject: [mrtg] Re: Axis Scaling
In-Reply-To: <A14D65DC2664D511B61300A0CC3F163422087A@moe.3dsi.com>; from FErvin@3dsi.com on Fri, Jan 09, 2004 at 06:02:12PM -0500
References: <A14D65DC2664D511B61300A0CC3F163422087A@moe.3dsi.com>
Message-ID: <20040110002516.A27161@slot.hollandcasino.net>

On Fri, Jan 09, 2004 at 06:02:12PM -0500, Frank Ervin wrote:
> I have modified getlog.pl to graph 404 errors per interval using the Web
> Service/Total Not Found Errors perfmon counter. The problem is this:
> We have contracted an independent security firm to audit our systems
> monthly.  The scan results in nearly 2000 404 errors.  This makes the axis
> scale so much that a slight increase in 404s is not noticable.  I would like
> to keep the axis reasonable enough to notice a small number of 404s, but I
> also need to keep the maxbytes total high enough where I'd be able to see
> huge bursts of 404s. Is it possible to force the axis  to be  something like
> this:
> 
> 5000
> 50
> 25
> 10
> 0
> 
> If not, Is there a way to keep the axis small, but still "graph" points
> somewhere above bounds?  Then I could at least still see the line shooting
> off the top of the graph...

It would be an ugly set of hacks, but what about this:

I don't know the getlog.pl script but let's assume this returns
the same number twice (for "inbound" and "outbound").  Change this.
Let one of them return numbers as described in the next paragraph,
the other one should return the real number of errors.  Now do not
display this counter (use "noi" or "noo" as appropriate).

The modified value will work normally when the number of errors stays
below 75.  If the number of errors is 75 or more, return 95.

This means that normal rates will be up to 75 and any higher number
of errors will stand out.  The Y-axis label will be somewhat incorrect,
because 95 does not mean 95.

In your day to day operation, you will see up to 75 errors per interval,
or you will easely notice the number is above 75 (without knowing the
exact amount!)

When so desired, change "noi" into "noo" (or vice versa), delete the
images and wait until the next run of mrtg.

HTH
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Sun Jan 11 16:43:18 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Sun, 11 Jan 2004 17:43:18 +0200
Subject: [mrtg] about the begining
Message-ID: <816066583.20040111174318@mail.ru>

Hi,

i used to watch my internet bandwidth in other server whitch had
running mrtg.. that server is
very often down.. so i'd like to make MRTG work on my own server..
I use debian distribution, i've installed mrtg using apt-get...
i try to configure it by using
perl /usr/bin/cfgmaker public@$2 --global "workdir: /var/www/html/mrtg/$$1" --output /etc/mrtg/$1.cfg
i get error :

--base: Get Device Info on public at public@:
Error:
  can't resolve "" to IP address
 at /usr/share/perl5/SNMP_util.pm line 423
SNMPWALK Problem for public at public@:
 at /usr/bin/cfgmaker line 712
darius:/etc/cricket#

I am new in configuration mrtg... can you help me what to do (i have
2 LAN cards. One is used by connecting to internet, other is even not
configuret, becouse i think about charing internet later)?
In all turtorials this line is writen, so i can't to go further in
configuration...


----
Darius


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From yamtak at b-session.com  Mon Jan 12 07:29:02 2004
From: yamtak at b-session.com (Takumi Yamane)
Date: Mon, 12 Jan 2004 15:29:02 +0900
Subject: [mrtg] Re: about the begining
In-Reply-To: <816066583.20040111174318@mail.ru>
References: <816066583.20040111174318@mail.ru>
Message-ID: <20040112062911.6143DD9421@ntardis.ee.ethz.ch>

On Sun, 11 Jan 2004 17:43:18 +0200, Alex van den Bogaerdt wrote 
in <816066583.20040111174318 at mail.ru>:
> Hi,
> 
> i used to watch my internet bandwidth in other server whitch had
> running mrtg.. that server is
... snip ...

hey darius,
watch your From: header, you are not 'Alex'.

quick answer for your question:
replace '$1'(and/or $2) with actual IP address of your server.

some people already answered your question 10 days ago.
what are you trying to do?
-- 
Takumi Yamane <yamtak at b-session.com>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From eurico at orbisat.com.br  Mon Jan 12 14:38:52 2004
From: eurico at orbisat.com.br (Eurico Vaz Junior)
Date: Mon, 12 Jan 2004 11:38:52 -0200
Subject: [mrtg] cfgmaker
Message-ID: <LFELKJECPDNDIMFCGNMIAEEFCKAA.eurico@orbisat.com.br>

When i run the cfgmaker, it don?t get the correct information about ip
address... it put a garbage name in the ip address of interface... as showed
bellow:

### Interface 2 >> Descr: '' | Name: '' | Ip: '21.1.2.0.0.0.0' | Eth: '' ###

Target[coruja_21.1.2.0.0.0.0]: /21.1.2.0.0.0.0:public at coruja:
SetEnv[coruja_21.1.2.0.0.0.0]: MRTG_INT_IP="21.1.2.0.0.0.0"
MRTG_INT_DESCR=""
MaxBytes[coruja_21.1.2.0.0.0.0]: 1250000
Title[coruja_21.1.2.0.0.0.0]: Traffic Analysis for 21.1.2.0.0.0.0 -- coruja
PageTop[coruja_21.1.2.0.0.0.0]: <H1>Traffic Analysis for 21.1.2.0.0.0.0 --
coruja</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>coruja in Unknown (edit
/etc/snmp/snmpd.conf)</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>Root &lt;root at localhost&gt; (configure
/etc/snmp/snmp.local.conf)</TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>1250.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>21.1.2.0.0.0.0 ()</TD></TR>
 </TABLE>

----------------------------------------------------------

Traffic Analysis for 2 -- coruja
System: coruja in Unknown (edit /etc/snmp/snmpd.conf)
Maintainer: Root <root at localhost> (configure /etc/snmp/snmp.local.conf)
Description:
ifType: ethernetCsmacd (6)
ifName:
Max Speed: 1250.0 kBytes/s
Ip: 21.1.2.0.0.0.0 ()
----------------------------------------------------------------

The ip showed in html page incorrect!  what should i do?

------------------------------------------
Eurico Vaz Junior
Tecnologia da Informa??o
Orbisat da Amaz?nia SA
Unidade S?o Jos? dos Campos - SP - Brasil
Tel: +55 (0)12 39292700
Fax: +55 (0)12 39291655
e-mail: eurico at orbisat.com.br
web: http://www.orbisat.com.br
------------------------------------------
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.560 / Virus Database: 352 - Release Date: 8/1/2004

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From exquo at mail.ru  Mon Jan 12 16:09:40 2004
From: exquo at mail.ru (Darius Povilaitis)
Date: Mon, 12 Jan 2004 17:09:40 +0200
Subject: [mrtg] Re: about the begining
In-Reply-To: <20040112062911.6143DD9421@ntardis.ee.ethz.ch>
References: <816066583.20040111174318@mail.ru>
 <20040112062911.6143DD9421@ntardis.ee.ethz.ch>
Message-ID: <1962329639.20040112170940@mail.ru>

Hi Takumi,

TY> quick answer for your question:
TY> replace '$1'(and/or $2) with actual IP address of your server.

TY> some people already answered your question 10 days ago.
TY> what are you trying to do?

i try to do this by using my expternal IP address ...
Instead of $1, $$1, $2 i type 62.212.192.220... i stil get the error
message... what you reccomend me to do?
I want to watch my internet bandwidth..



darius:~# perl /usr/bin/cfgmaker public at 62.212.192.220 --global "workdir: /home/darius/public_html/mrtg/62.212.192.220" --output /etc/mrtg/62.212.192.220.cfg
--base: Get Device Info on public at 62.212.192.220:
--base: Get Device Info on public at 62.212.192.220:
SNMP Error:
no response received
SNMPv1_Session (remote host: "62.212.192.220" [62.212.192.220].161)
                  community: "public"
                 request ID: 277614839
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/share/perl5/SNMP_util.pm line 621
SNMPWALK Problem for 1.3.6.1.2.1.1 on public at 62.212.192.220:
 at /usr/bin/cfgmaker line 712
darius:~# --base: Get Device Info on public at 62.212.192.220:
bash: --base:: command not found


-- 
Su pagarba
 Darius                            mailto:exquo at mail.ru


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From dan.mcdonald at austinenergy.com  Mon Jan 12 16:30:37 2004
From: dan.mcdonald at austinenergy.com (Daniel J McDonald)
Date: Mon, 12 Jan 2004 09:30:37 -0600
Subject: [mrtg] Re: about the begining
In-Reply-To: <1962329639.20040112170940@mail.ru>
References: <816066583.20040111174318@mail.ru>
	 <20040112062911.6143DD9421@ntardis.ee.ethz.ch>
	 <1962329639.20040112170940@mail.ru>
Message-ID: <1073921437.2302.6.camel@mcdonalddj-lnx.electric.ci.austin.tx.us>

On Mon, 2004-01-12 at 09:09, Darius Povilaitis wrote:

> i try to do this by using my expternal IP address ...
> Instead of $1, $$1, $2 i type 62.212.192.220... i stil get the error
> message... what you reccomend me to do?

At this point it is a NetSNMP problem, not an mrtg problem.

You might try snmp v2c, e.g:
# perl /usr/bin/cfgmaker public at 62.212.192.220:::::2 --global "workdir:
/home/darius/public_html/mrtg/62.212.192.220"

But I suspect you don't have NetSNMP set up correctly, and most of the
folks on this list are router jocks, so you'll need to find the NetSNMP
forum for further information on how to fix that (or whatever snmp
server distribution you have on the server you are trying to use).
-- 
Daniel J McDonald, CCIE 2495, CNX
Austin Energy


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From yamtak at b-session.com  Mon Jan 12 16:44:44 2004
From: yamtak at b-session.com (Takumi Yamane)
Date: Tue, 13 Jan 2004 00:44:44 +0900
Subject: [mrtg] Re: about the begining
In-Reply-To: <1962329639.20040112170940@mail.ru>
References: <1962329639.20040112170940@mail.ru>
Message-ID: <20040112154455.083B5D93C1@ntardis.ee.ethz.ch>

Hi,

On Mon, 12 Jan 2004 17:09:40 +0200, Darius Povilaitis wrote 
in <1962329639.20040112170940 at mail.ru>:
> 
> TY> quick answer for your question:
> TY> replace '$1'(and/or $2) with actual IP address of your server.
...
> i try to do this by using my expternal IP address ...
...
> darius:~# perl /usr/bin/cfgmaker public at xxx.xxx.xxx.xxx 
...
> SNMP Error: no response received

Try 127.0.0.1 instead of your external IP address, its loopback address 
and should be work fine.

Also I think you'd better to mask your real IP address (and SNMP 
community name) when you post your message to strangers (like me ;),
otherwise your box would be turned into kiddie's playroom in a minute.

It is bad idea to disclose those informations to public.

-- 
Takumi Yamane <yamtak at b-session.com>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From postmaster at gnvfc.net  Mon Jan 12 17:57:52 2004
From: postmaster at gnvfc.net (postmaster at gnvfc.net)
Date: Mon, 12 Jan 2004 22:27:52 +0530
Subject: [mrtg] Fw: OID requires to measure Eb/No of IPRicot
Message-ID: <005e01c3d92d$37a34af0$4681a3cb@ispqznmqzghk2t>

hello

We are using Enterasys (Cabletron) ELS 100 (24 port) switch in our ISP setup. We would like to monitore its CPU Utilization..


Any one know about it......

Regards

suhag.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From postmaster at gnvfc.net  Mon Jan 12 17:59:30 2004
From: postmaster at gnvfc.net (postmaster at gnvfc.net)
Date: Mon, 12 Jan 2004 22:29:30 +0530
Subject: [mrtg] CPU Utilization for Enterasys ELS 100
Message-ID: <008d01c3d92d$7243d670$4681a3cb@ispqznmqzghk2t>

----- Original Message ----- 
From: postmaster at gnvfc.net 
To: mrtg at list.ee.ethz.ch 
Sent: Monday, January 12, 2004 10:27 PM
Subject: Fw: OID requires to measure Eb/No of IPRicot



hello

We are using Enterasys (Cabletron) ELS 100 (24 port) switch in our ISP setup. We would like to monitore its CPU Utilization..


Any one know about it......

Regards

suhag.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From es at gonca.com  Mon Jan 12 19:12:00 2004
From: es at gonca.com (e s)
Date: Mon, 12 Jan 2004 20:12:00 +0200
Subject: [mrtg] MRTG statistics kB/s B/s
Message-ID: <00fd01c3d937$92e75a50$0f41aec3@seth>

   Hi,
    I have a problem with mrtg.
Max  In: 14.0 kB/s (87.7%)   Average  In: 9183.0 B/s (57.4%)   Current  In: 3293.0 B/s (20.6%)

It shows the statistics in B/s if the speed is lower than 10
And it shows in kB/s if it reachs 10 or above

I alway want to see statistics in kB/s.
Like,  Max  In: 14.0 kB/s (87.7%)   Average  In: 9.18 kB/s (57.4%)   Current  In: 3.23 B/s (20.6%)

Has anyone got an idea about this?

-Evren

Keywords for this post: MRTG , Current , Average , statistics , kB/s , B/s i bits , bytes , kilobytes 

 
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From bilal at it-pro.net  Mon Jan 12 19:11:47 2004
From: bilal at it-pro.net (Bilal Dar)
Date: Mon, 12 Jan 2004 21:11:47 +0300
Subject: [mrtg] group async interface
Message-ID: <001e01c3d937$8c6565f0$370966d4@dar>



Hi,

I want to run mrtg for my dialup users, I have Cisco 2600 router with analog modem module. I want to monitor how much traffic is being utilized by my dialup users. Since my group-async interface is using ethernet ip address. I cannot do it using the ip address because it will give me graph for ethernet utilization. How can I accomplish this.

Thanks
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From nshivakumar at hotmail.com  Tue Jan 13 04:38:50 2004
From: nshivakumar at hotmail.com (N. Shivakumar)
Date: Tue, 13 Jan 2004 11:38:50 +0800
Subject: [mrtg] OID Descriptions
Message-ID: <Sea2-F424rFdY9ovgfH00025cd8@hotmail.com>

Hi All,

Can anyone give me more details on the following OIDs. I am using the SNMP 
browser, but I am not able to get the excat description of the following 
OIDs due to which I don't know which one is the CPU descritpion and which 
value is the CPU utilization value. This OIDs. are for the IBM machines 
running AIX.

1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.2.1 = "cpu0"
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.2.2 = "cpu1"
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.2.3 = "cpu2"
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.2.4 = "cpu3"
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.2.5 = "cpu4"
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.2.6 = "cpu5"
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.3.1 = 25
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.3.2 = 25
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.3.3 = 25
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.3.4 = 25
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.3.5 = 25
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.3.6 = 25
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.4.1 = 24
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.4.2 = 25
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.4.3 = 25
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.4.4 = 25
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.4.5 = 25
1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.4.6 = 25


Thanks in advance

Regards
Shiva

_________________________________________________________________
Get 10mb of inbox space with MSN Hotmail Extra Storage 
http://join.msn.com/?pgmarket=en-sg

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From emilianopanella at yahoo.it  Tue Jan 13 14:28:13 2004
From: emilianopanella at yahoo.it (=?iso-8859-1?q?Emiliano=20Panella?=)
Date: Tue, 13 Jan 2004 14:28:13 +0100 (CET)
Subject: [mrtg] mrtg expression
Message-ID: <20040113132813.54524.qmail@web41308.mail.yahoo.com>

Hello 
I 've to calcolate the following expression with the mrtg grapher for input errors and output errors:
( ifInErrors/ ifInUcastPkts + ifInNUcastPkts ) * 100
( ifOutErrors/ ifOutUcastPkts + ifOutNUcastPkts ) * 100
 
I use the following sintax:
Target[err_2]:ifInErrors.2&ifOutErrors:public at mydevice * 100 / ifInUcastPkts.2&ifOutUcastPkts.2:public at mydevice + ifInNUcastPkts.2&ifOutNUcastPkts.2:public at mydevice  
 
Is It right?The mrtg sampled the value like zero, i use also the option perminute.
Another question:
can I use also the parenthesis in the expression?
 
Thanks in advance for your help
Emiliano.


---------------------------------
Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati, l'antivirus, il filtro Anti-spam

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Tue Jan 13 15:06:26 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Tue, 13 Jan 2004 15:06:26 +0100
Subject: [mrtg] Re: mrtg expression
In-Reply-To: <20040113132813.54524.qmail@web41308.mail.yahoo.com>; from emilianopanella@yahoo.it on Tue, Jan 13, 2004 at 02:28:13PM +0100
References: <20040113132813.54524.qmail@web41308.mail.yahoo.com>
Message-ID: <20040113150626.A26498@slot.hollandcasino.net>

On Tue, Jan 13, 2004 at 02:28:13PM +0100, Emiliano Panella wrote:
> Hello 
> I 've to calcolate the following expression with the mrtg grapher for input errors and output errors:
> ( ifInErrors/ ifInUcastPkts + ifInNUcastPkts ) * 100
> ( ifOutErrors/ ifOutUcastPkts + ifOutNUcastPkts ) * 100

Substitute variables to simplify:

( a / b + c ) * 100    for input (before &)
( d / e + f ) * 100    for output (after &)

> I use the following sintax:
> Target[err_2]:ifInErrors.2&ifOutErrors:public at mydevice * 100 / ifInUcastPkts.2&ifOutUcastPkts.2:public at mydevice + ifInNUcastPkts.2&ifOutNUcastPkts.2:public at mydevice  

a&d * 100 / b&e + c&f  which is
a * 100 / b + c        for input
d * 100 / e + f        for output

This is not the same

> Another question:
> can I use also the parenthesis in the expression?

I think you can. Use plenty of whitespace.

If you can't, rewrite the expression:

(a / b + c ) * 100 = 100 * a / 100 * b + 100 * c

However, you probably want a / (b + c) * 100 to get a percentage
of errors in relation to unicasts+broadcasts.

HTH
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From emilianopanella at yahoo.it  Tue Jan 13 16:12:03 2004
From: emilianopanella at yahoo.it (=?iso-8859-1?q?Emiliano=20Panella?=)
Date: Tue, 13 Jan 2004 16:12:03 +0100 (CET)
Subject: [mrtg] R:mrtg expression
Message-ID: <20040113151203.93547.qmail@web41303.mail.yahoo.com>

Thanks for your answer!
1)Can I use variables a e b for sobstitute mib  in the mrtg or target of target ?
Which is the difference from my expression and yours?
Tahnks
Emiliano
 
On Tue, Jan 13, 2004 at 02:28:13PM +0100, Emiliano Panella wrote:
> Hello 
> I 've to calcolate the following expression with the mrtg grapher for input errors and output errors:
> ( ifInErrors/ ifInUcastPkts + ifInNUcastPkts ) * 100
> ( ifOutErrors/ ifOutUcastPkts + ifOutNUcastPkts ) * 100
Substitute variables to simplify:

( a / b + c ) * 100    for input (before &)
( d / e + f ) * 100    for output (after &)

> I use the following sintax:
> Target[err_2]:ifInErrors.2&ifOutErrors:public at mydevice * 100 / ifInUcastPkts.2&ifOutUcastPkts.2:public at mydevice + ifInNUcastPkts.2&ifOutNUcastPkts.2:public at mydevice  

a&d * 100 / b&e + c&f  which is
a * 100 / b + c        for input
d * 100 / e + f        for output

This is not the same

> Another question:
> can I use also the parenthesis in the expression?

I think you can. Use plenty of whitespace.

If you can't, rewrite the expression:

(a / b + c ) * 100 = 100 * a / 100 * b + 100 * c

However, you probably want a / (b + c) * 100 to get a percentage
of errors in relation to unicasts+broadcasts.

HTH
Alex
-- 





---------------------------------
Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati, l'antivirus, il filtro Anti-spam

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jordi.macia.f at lacaixa.es  Tue Jan 13 16:28:11 2004
From: jordi.macia.f at lacaixa.es (jordi.macia.f at lacaixa.es)
Date: Tue, 13 Jan 2004 16:28:11 +0100
Subject: [mrtg] Large values
In-Reply-To: <ecartis-01132004120816.10170.2@list.ee.ethz.ch>
Message-ID: <OF97F3F8C6.B2F4481B-ONC1256E1A.0053FD79-C1256E1A.0054FB06@lacaixa.es>



Hi all.

Sometimes, when there is a communication problem between the target device
and the monitoring server where MRTG is running, instead of an UNKOWN
value, MRTG puts a wrong value (very large) into the database (RRD or .log
file). Does anybody know why does it hapen and how to avoid this? This is
not the "flat line" issue documented in the MRTG FAQ.

Thanks in advance,
Jordi Macia.



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From darlists at bakerd.com  Tue Jan 13 18:36:30 2004
From: darlists at bakerd.com (Alan Rader)
Date: Tue, 13 Jan 2004 12:36:30 -0500
Subject: [mrtg] OT - Workstation Network Speed Test
Message-ID: <EC2C81A5BC5A954586B9F8D5F8C0BA123FCC57@INMAIL1.gs.bd.firm>

Are there any utilities out there that will tell you what a workstations
actual network connection is?  I know you can turn on the icon and see
if it is 10mb or 100mb, but I also want to know if it is half or full
duplex.  Currently we have most of our equipment using auto both on our
switches and end nodes, but I keep seeing that it can be mis-reported
and that everything should be hard set.  A little more maintenance
involved, but better performance in the long run.
 
There was an article on this in Network World and it said you could use
utilities like mrtg to verify it, but how would mrtg tell me if a
connection was half or full duplex?
Also I don't really want to map every workstation port on all my
switches.  I would rather have something I could put on the workstation
or run remotely.
 
 
Thanks
 

--------------------------------------------
ATTENTION:  This message and all attachments are PRIVATE, and may contain
information that is CONFIDENTIAL and PRIVILEGED.  
If you received this message in error, please notify the sender by reply 
e-mail and delete the message immediately.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From tcyee at co.la.ca.us  Tue Jan 13 19:18:14 2004
From: tcyee at co.la.ca.us (Tony Yee)
Date: Tue, 13 Jan 2004 10:18:14 -0800
Subject: [mrtg] MRTG Viewer
Message-ID: <006e01c3da01$9e56ffb0$a5fb020a@hobbes2>

Hello all,
I'm not sure if this is the correct forum to pose this question.
Has anybody been able to get the MRTG Viewer to work
on a windows box? Or do you know of a similar tool that
will work on windows 2000? Can someone point me in the
right direction?
Thanks,
-Tony

---
[This E-mail scanned for viruses.]

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jmosh at shaw.ca  Tue Jan 13 19:41:41 2004
From: jmosh at shaw.ca (jmosh at shaw.ca)
Date: Tue, 13 Jan 2004 10:41:41 -0800
Subject: [mrtg] Too many lock files
Message-ID: <6b0efd6abd17.6abd176b0efd@shaw.ca>


I'm finding there are a lot of lock files for some of my configs, that look like this: device1.cfg_l_1234 

Can anyone explain why I'm seeing this kind of behaviour. I'm running mrtg-2.9.17-13 or a Redhat 9 box.

also, does mrtg log errors, and if so to where? I don't  see any kind of logs in /var/log/

thanks,
Joubin

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From hackerwacker at cybermesa.com  Tue Jan 13 20:11:22 2004
From: hackerwacker at cybermesa.com (james)
Date: Tue, 13 Jan 2004 12:11:22 -0700
Subject: [mrtg] Re: Too many lock files
References: <6b0efd6abd17.6abd176b0efd@shaw.ca>
Message-ID: <012b01c3da09$086d2f80$0200020a@jamesnew>

: also, does mrtg log errors, and if so to where? I don't  see any kind of logs in /var/log/
: 
: thanks,
: Joubin

Start it with the correct flag !

--logging /var/log/mrtg.log

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jmosh at shaw.ca  Tue Jan 13 20:15:12 2004
From: jmosh at shaw.ca (jmosh at shaw.ca)
Date: Tue, 13 Jan 2004 11:15:12 -0800
Subject: [mrtg] Re: Too many lock files
Message-ID: <6b120f6ad9bb.6ad9bb6b120f@shaw.ca>

Thanks,
thats one down...

----- Original Message -----
From: james <hackerwacker at cybermesa.com>
Date: Tuesday, January 13, 2004 11:11 am
Subject: [mrtg] Re: Too many lock files

> : also, does mrtg log errors, and if so to where? I don't  see any 
> kind of logs in /var/log/
> : 
> : thanks,
> : Joubin
> 
> Start it with the correct flag !
> 
> --logging /var/log/mrtg.log
> 
> --
> Unsubscribe mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From marc at somix.com  Tue Jan 13 20:36:37 2004
From: marc at somix.com (Marc Bilodeau)
Date: Tue, 13 Jan 2004 14:36:37 -0500
Subject: [mrtg] Re: MRTG Viewer
In-Reply-To: <006e01c3da01$9e56ffb0$a5fb020a@hobbes2>
Message-ID: <000901c3da0c$8f6576c0$9701010a@mbilodea>

Somix designs web-based windows solutions (Denika and WebNM) for MRTG and
RRD-Tool. You can download free versions that do not expire. Also, they have
a mrtg repository filled with templates for different vendors and devices.

Sincerely,
Marc
http://www.somix.com/support/mrtg_repository.php

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Tony Yee
Sent: Tuesday, January 13, 2004 1:18 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] MRTG Viewer


Hello all,
I'm not sure if this is the correct forum to pose this question. Has anybody
been able to get the MRTG Viewer to work on a windows box? Or do you know of
a similar tool that will work on windows 2000? Can someone point me in the
right direction? Thanks, -Tony

---
[This E-mail scanned for viruses.]

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From dogslobber2000 at yahoo.com  Tue Jan 13 20:53:27 2004
From: dogslobber2000 at yahoo.com (Don Radick)
Date: Tue, 13 Jan 2004 11:53:27 -0800 (PST)
Subject: [mrtg] Re: OT - Workstation Network Speed Test
In-Reply-To: <EC2C81A5BC5A954586B9F8D5F8C0BA123FCC57@INMAIL1.gs.bd.firm>
Message-ID: <20040113195327.15573.qmail@web61104.mail.yahoo.com>


Alan Rader <darlists at bakerd.com> wrote:Are there any utilities out
there that will tell you what a workstations
actual network connection is? I know you can turn on the icon and see
if it is 10mb or 100mb, but I also want to know if it is half or full
duplex. Currently we have most of our equipment using auto both on our
switches and end nodes, but I keep seeing that it can be mis-reported
and that everything should be hard set. A little more maintenance
involved, but better performance in the long run.

There was an article on this in Network World and it said you could use
utilities like mrtg to verify it, but how would mrtg tell me if a
connection was half or full duplex?
Also I don't really want to map every workstation port on all my
switches. I would rather have something I could put on the workstation
or run remotely.


Thanks

====================================================================

You will want to look at the switch mib for an oid that shows
ethernet port collisions, late-collisions, CRC errors and 
possibly some other errors.

If a end-node is set properly full-duplex to a full-duplex switch
port, there should be no, or very, very small amount of errors.
If duplex is set incorrectly, you'll see many collision errors
on that port.  (of course, if an end-node should be set for
half-duplex, you will see collisions on that port.)

here's a note from the MRTG mail list.
http://www.ee.ethz.ch/~slist/mrtg/msg01814.html

you can download the Cisco MIBS from their web site.

HTH, 
Don





__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From amolsapkal at coolgoose.com  Tue Jan 13 20:52:39 2004
From: amolsapkal at coolgoose.com (Amol Sapkal)
Date: Wed, 14 Jan 2004 01:42:39 +0550
Subject: [mrtg] Re: OID Descriptions
Message-ID: <1074024759.2849115237@as03.coolgoose.com>


> Hi All,
> 
> Can anyone give me more details on the following OIDs. I am using the SNMP 
> browser, but I am not able to get the excat description of the following 
> OIDs due to which I don't know which one is the CPU descritpion and which 
> value is the CPU utilization value. This OIDs. are for the IBM machines 
> running AIX.
> 
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.2.1 = "cpu0"
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.2.2 = "cpu1"
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.2.3 = "cpu2"
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.2.4 = "cpu3"
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.2.5 = "cpu4"
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.2.6 = "cpu5"

Above is cpu description - simple :)
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.3.1 = 25
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.3.2 = 25
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.3.3 = 25
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.3.4 = 25
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.3.5 = 25
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.3.6 = 25
above _seems_ instant cpu utilisation.

> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.4.1 = 24
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.4.2 = 25
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.4.3 = 25
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.4.4 = 25
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.4.5 = 25
> 1.3.6.1.4.1.2.3.1.2.2.2.1.1.1.4.6 = 25
above _could_be_ last 5 mins avg utilisation.

Check the MIB for correct details.

Regds,
Amol Sapkal


> 
> 
> Thanks in advance
> 
> Regards
> Shiva
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From amolsapkal at coolgoose.com  Tue Jan 13 20:58:24 2004
From: amolsapkal at coolgoose.com (Amol Sapkal)
Date: Wed, 14 Jan 2004 01:48:24 +0550
Subject: [mrtg] Re: Large values
Message-ID: <1074025104.2544845269@as03.coolgoose.com>


> Hi all.
> 
> Sometimes, when there is a communication problem between the target device
> and the monitoring server where MRTG is running, instead of an UNKOWN
> value, MRTG puts a wrong value (very large) into the database (RRD or .log
> file). Does anybody know why does it hapen and how to avoid this? This is
> not the "flat line" issue documented in the MRTG FAQ.


The best way to check this out is checking the snmp poll values on the server
itself and the time of the problem. It could indeed happen that your server is
storing bad values in the MIB table and the same is being collected by your
box (I have seen this on cisco). Incase you (or someone else) is unable to
connect to the server, you could 'hand-run' your mrtg script and see what
error it generates.

Hope above helps.


Regds,
Amol Sapkal

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From amolsapkal at coolgoose.com  Tue Jan 13 21:08:23 2004
From: amolsapkal at coolgoose.com (Amol Sapkal)
Date: Wed, 14 Jan 2004 01:58:23 +0550
Subject: [mrtg] Re: R:mrtg expression
Message-ID: <1074025703.1394321971@as03.coolgoose.com>


> Thanks for your answer!
> 1)Can I use variables a e b for sobstitute mib  in the mrtg or target of
> target ?
> Which is the difference from my expression and yours?
> Tahnks
> Emiliano
>

The best thing to do, to avoid confusion, is write small perl scripts with
above formulae ;-)

Make sure you print the output in the format "Val1\nVal2\n0\n0" or mrtg wont
like it.


Regds,
Amol

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From oetiker at ee.ethz.ch  Tue Jan 13 21:53:15 2004
From: oetiker at ee.ethz.ch (Tobias Oetiker)
Date: Tue, 13 Jan 2004 21:53:15 +0100 (MET)
Subject: [mrtg] Re: [mrtg-developers] Large values
In-Reply-To: <OF97F3F8C6.B2F4481B-ONC1256E1A.0053FD79-C1256E1A.0054FB06@lacaixa.es>
References: <OF97F3F8C6.B2F4481B-ONC1256E1A.0053FD79-C1256E1A.0054FB06@lacaixa.es>
Message-ID: <Pine.GSO.4.58.0401132152360.27260@abin.rr.rgum.pu>

Today jordi.macia.f at lacaixa.es wrote:

>
>
> Hi all.
>
> Sometimes, when there is a communication problem between the target device
> and the monitoring server where MRTG is running, instead of an UNKOWN
> value, MRTG puts a wrong value (very large) into the database (RRD or .log
> file). Does anybody know why does it hapen and how to avoid this? This is
> not the "flat line" issue documented in the MRTG FAQ.
>
> Thanks in advance,
> Jordi Macia.

Hi Jordi,

is the Large value larger than MaxBytes ? You say sometimes, is
there any pattern ?

tobi

>
>
>
> --
> Unsubscribe mailto:mrtg-developers-request at list.ee.ethz.ch?subject=unsubscribe
> Help        mailto:mrtg-developers-request at list.ee.ethz.ch?subject=help
> Archive     http://www.ee.ethz.ch/~slist/mrtg-developers
>

-- 
 ______    __   _
/_  __/_  / /  (_) Oetiker @ ISG.EE, ETZ J97, ETH, CH-8092 Zurich
 / // _ \/ _ \/ /  System Manager, Time Lord, Coder, Designer, Coach
/_/ \.__/_.__/_/   http://people.ee.ethz.ch/~oetiker   +41(0)1-632-5286

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From amolsapkal at coolgoose.com  Tue Jan 13 21:28:28 2004
From: amolsapkal at coolgoose.com (Amol Sapkal)
Date: Wed, 14 Jan 2004 02:18:28 +0550
Subject: [mrtg] Re: Specifying a range of routers
Message-ID: <1074026908.3635551292@as03.coolgoose.com>


> Hey all, this is my first post; it's good to be on the list. I have a question
> regarding some syntax.
> I am using cfgmaker to specify about 30 snmp devices, since these devices are
> assigned in linear ip order can I specify 1.1.1.1 -> 1.1.1.30  with a range
> command or must i have each individually?
> 
> I can generate a list and direct into cfgmaker, i know, but...
> 
> -Peter

Use a simple perl script which will read the IPs from a list and then run the
./cfgmaker from that script, keeping the IP_as_a_variable in the script.


Regds,
Amol

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From naman.latif at inamed.com  Wed Jan 14 02:48:26 2004
From: naman.latif at inamed.com (Naman Latif)
Date: Tue, 13 Jan 2004 17:48:26 -0800
Subject: [mrtg] Extract RRD Data
Message-ID: <83B3FCAD284096489C9967C54B33B6B302AD50CF@sigma.inamed.com>


Hi All,

Is there an example\Script that I can refer to for extracting data out
of a RRD ?
E.g.
I want to extract\get the Traffic Rate for the Last 5 minutes from a RRD
that is storing the Traffic stats for a router interface.(ds.type =
COUNTER).
I have tried searching the mailing list but need some directions to
implement this.

Regards,
Naman

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From cadell.r at tvcatalunya.com  Wed Jan 14 10:13:54 2004
From: cadell.r at tvcatalunya.com (Adell Querol, Christian)
Date: Wed, 14 Jan 2004 10:13:54 +0100
Subject: [mrtg] Overflow with gigabit interfaces
Message-ID: <D7505C88D49ED4118A960090274F19110411DB3C@fluvia.local>

I have a routine which gets  data from mrtg's log file. Mrtg uses "long"
data, 32 bits, so its maximum value is 4.294.967.296, this value is
suficient for fast ethernet interfaces, because their maximum throughput is
100Mbits-> 12.500.000 bytes/second. Mrtg gets data each five minutes, 300
seconds, so for fast ethernet interfaces the maximum throughput is
12500.000*300 = 3.750.000.000 < 4.294.967.296 so it works well, but my
problem begins with gigabit interfaces, their max throughput is
125.000.000*300 = 
37.500.000.000  > 4.294.967.296 so I ask HOW CAN MRTG deal with this
overflow problem for I can get data from log file without errors?

thanks in advance

Christian Adell Querol
Televisi? de Catalunya

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From emilianopanella at yahoo.it  Wed Jan 14 12:17:39 2004
From: emilianopanella at yahoo.it (=?iso-8859-1?q?Emiliano=20Panella?=)
Date: Wed, 14 Jan 2004 12:17:39 +0100 (CET)
Subject: [mrtg] mrtg sampled always zero value
Message-ID: <20040114111739.73042.qmail@web41314.mail.yahoo.com>

Hi
My Mrtg sampling always zero value for ifInErrors also when the value is different from zero.
Could be the rrdtool too large or corrupted?
Have you any idea about this problem?
Thanks in advance 
Emiliano and Simona


---------------------------------
Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati, l'antivirus, il filtro Anti-spam

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From JKoelstra at MINSZW.NL  Wed Jan 14 12:27:58 2004
From: JKoelstra at MINSZW.NL (Koelstra, J. (Jan))
Date: Wed, 14 Jan 2004 12:27:58 +0100
Subject: [mrtg] Re: mrtg sampled always zero value
Message-ID: <E22D26B0F1E69D4188EE2BE56D26EB6B0AB77E@MAILCL0102.MINSZW.NL>

Probably the rate of errors is to low. By default MRTG calculates the
rate per second.
You can use the 'perminute' or 'perhour' options to show low rates.

Hth,

Jan.

-----Original Message-----
From: Emiliano Panella [mailto:emilianopanella at yahoo.it] 
Sent: Wednesday, January 14, 2004 12:18 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] mrtg sampled always zero value


Hi
My Mrtg sampling always zero value for ifInErrors also when the value is
different from zero. Could be the rrdtool too large or corrupted? Have
you any idea about this problem? Thanks in advance 
Emiliano and Simona


---------------------------------
Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati,
l'antivirus, il filtro Anti-spam

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. 
Aan dit bericht kunnen geen rechten worden ontleend. 

Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van het bericht te vernietigen. 
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt. 
This message shall not constitute any obligations.

This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and delete its content.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From simionea at statistica.md  Wed Jan 14 14:56:56 2004
From: simionea at statistica.md (Simion Onea)
Date: Wed, 14 Jan 2004 15:56:56 +0200
Subject: [mrtg] Data older than 9 months disappears
Message-ID: <005801c3daa6$45e9c380$080114ac@DSS>

Hi !

I have a problem with the 'yearly' graph of the traffic from a Cisco router.
Although MRTG had been collecting data for more than a year, data older than
9 months disappears.
(both on the graph and in the log file)
(http://www.statistica.md/~simionea/router-traffic-year.png)
Has anyone encounered such a problem ?

I am using Red Hat Linux 9 and MRTG 2.10.5 (RPM version)

Thanks.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From emilianopanella at yahoo.it  Wed Jan 14 15:24:34 2004
From: emilianopanella at yahoo.it (=?iso-8859-1?q?Emiliano=20Panella?=)
Date: Wed, 14 Jan 2004 15:24:34 +0100 (CET)
Subject: [mrtg] Re: mrtg sampled always zero value
Message-ID: <20040114142434.10258.qmail@web41302.mail.yahoo.com>

Hi,
Thanks for your immediate answer
I use the option perminute jet.
Have you another suggestion or any link to make troubleshooting?
 
Probably the rate of errors is to low. By default MRTG calculates the
rate per second.
You can use the 'perminute' or 'perhour' options to show low rates.
Hth,

Jan.

-----Original Message-----
From: Emiliano Panella [mailto:emilianopanella at yahoo.it] 
Sent: Wednesday, January 14, 2004 12:18 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] mrtg sampled always zero value


Hi
My Mrtg sampling always zero value for ifInErrors also when the value is
different from zero. Could be the rrdtool too large or corrupted? Have
you any idea about this problem? Thanks in advance 
Emiliano and Simona


---------------------------------
Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati,
l'antivirus, il filtro Anti-spam

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. 
Aan dit bericht kunnen geen rechten worden ontleend. 

Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van het bericht te vernietigen. 
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt. 
This message shall not constitute any obligations.

This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and delete its content.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    



---------------------------------
Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati, l'antivirus, il filtro Anti-spam

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From maurice.al-khaliedy at modcomp.de  Wed Jan 14 16:56:57 2004
From: maurice.al-khaliedy at modcomp.de (Maurice Al-Khaliedy)
Date: Wed, 14 Jan 2004 16:56:57 +0100
Subject: [mrtg] Graph with only one Value
Message-ID: <LAEGLDNNKNHBBAOELNCBEEDMCBAA.maurice.al-khaliedy@modcomp.de>

Hello,

is it possible to graph only one value with mrtg ?
And how looks like the cfg file

e.g.

The output of a script give me only one value. 0 or 1.
The graph should show like a rectangle.

 y #
   #
 1 ########  #########################
   #      #  #
   #      #  #
 0 ###################################
                                    x


Ciao
Maurice

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From girts.legzdins at energo.lv  Wed Jan 14 17:08:12 2004
From: girts.legzdins at energo.lv (Girts Legzdinsh)
Date: Wed, 14 Jan 2004 18:08:12 +0200
Subject: [mrtg] In place of (daily: 5 minute average) I need (daily: 1 minute averaga)
Message-ID: <009101c3dab8$9c256580$4a25010a@GLegzdinsNote>

that's my problem
i'm a newbie in mrtg stuff..
so I want that the first graph is a 1 minute average and it must show the
exact information..
in which config files and what do I need to replace or add?

thanks

Girts Legzdins
Network Administrator
Latvenergo
Technical Center
Latvia
girts.legzdins at latvenergo.lv

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Chris.Snider at Tagtmi.com  Wed Jan 14 17:22:03 2004
From: Chris.Snider at Tagtmi.com (Chris Snider)
Date: Wed, 14 Jan 2004 10:22:03 -0600
Subject: [mrtg] Re: In place of (daily: 5 minute average) I need (daily: 1 minute averaga)
In-Reply-To: <009101c3dab8$9c256580$4a25010a@GLegzdinsNote>
Message-ID: <000001c3daba$8b7cccd0$e862a8c0@chrissnider>

What you will need to do is add Interval: 1 to the global section of you
config file.  That should do it.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Girts Legzdinsh
Sent: Wednesday, January 14, 2004 10:08 AM
To: mrtg-liste
Subject: [mrtg] In place of (daily: 5 minute average) I need (daily: 1
minute averaga)

that's my problem
i'm a newbie in mrtg stuff..
so I want that the first graph is a 1 minute average and it must show the
exact information..
in which config files and what do I need to replace or add?

thanks

Girts Legzdins
Network Administrator
Latvenergo
Technical Center
Latvia
girts.legzdins at latvenergo.lv

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From f.maazouzi at caramail.com  Wed Jan 14 16:22:36 2004
From: f.maazouzi at caramail.com (fatima maazouzi )
Date: Wed, 14 Jan 2004 16:22:36 +0100
Subject: [mrtg] MRTG trafic
Message-ID: <1074097356023357@lycos-europe.com>

table.mail_content {DISPLAY: block}Bonjour, Est-ce que l'activation de MRTG
pour un routeur  n'affecte elle pas le taux d'utilisation des interfaces (en
entr?e ou en sortie). Comment concevoir un fichier de configuration pour le
suivi du % d'utilisation de la CPU d'un routeur? Merci de me repondre
Les noms de domaine les moins chers du march? : 6,49 euros HT sur
www.lycos.fr/pro[1]. 

--- Links ---
   1 http://www.lycos.fr/pro

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From ghira at mistral.co.uk  Wed Jan 14 17:28:50 2004
From: ghira at mistral.co.uk (ghira at mistral.co.uk)
Date: Wed, 14 Jan 2004 16:28:50 GMT
Subject: [mrtg] Threshold script won't run
Message-ID: <20040114162850.96A8A152811@mailhost1.mistral.co.uk>

I've looked up web pages about threshold scripts, and as far as I
can see I'm doing everything right. But it's not working, so there
must be something I'm missing...

I'm running MRTG 2.9.17 on a Solaris 8 machine. (I may upgrade
to a later version at some point).

Here's part of the config I'm trying to use:

Target[clay3_26_err]: `/export/home/httpd/mrtg/error.p`
#SetEnv[clay3_26_err]: MRTG_INT_IP="" MRTG_INT_DESCR="A "
MaxBytes[clay3_26_err]: 1
Title[clay3_26_err]: Error Analysis for 26 -- Clay3
PageTop[clay3_26_err]: <H1>Error Analysis for 26 -- Clay3</H1>
YLegend[clay3_26_err]: Errs per Mpkt
ThreshMaxI[clay3_26_err]: 1
#ThreshProgI[clay3_26_err]: /export/home/testpage.p

"testpage.p" is a perl script, and is executable. 

If I uncomment the ThreshProgI line, I get this:

usr/local/mrtg-2/bin/mrtg /export/home/httpd/mrtg/clay3demo.cfg 
ERROR: CFG Error in "threshprogi[clay3_26_err]", line 0: Threshold program
/export/home/testpage.p <TABLE> <TR><TD>System:</TD>     <TD>Clay3 in
Clayponds, Topfloor House 3</TD></TR> <TR><TD>Maintainer:</TD>
<TD></TD></TR> <TR><TD>Description:</TD><TD>A   </TD></TR>
<TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>ifName:</TD>     <TD>A </TD></TR> <TR><TD>Max Speed:</TD> 
<TD>100.0 Mbits/s</TD></TR> </TABLE> cannot be executed

The "table" stuff comes from lines immediately following the
threshprog line.

This also happened with a previous shell script version called testpage

Web pages I've looked at say that the name of the threshprog doesn't
need to be in quotes or backticks. What am I doing wrong?

-- 
Adam Atkinson
ghira at mistral.co.uk

---------------------------------------------
This message was sent using Mistral Webmail.
http://www.mistral.net


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Chris.Snider at Tagtmi.com  Wed Jan 14 17:32:01 2004
From: Chris.Snider at Tagtmi.com (Chris Snider)
Date: Wed, 14 Jan 2004 10:32:01 -0600
Subject: [mrtg] Re: Graph with only one Value
In-Reply-To: <LAEGLDNNKNHBBAOELNCBEEDMCBAA.maurice.al-khaliedy@modcomp.de>
Message-ID: <000101c3dabb$efc4af90$e862a8c0@chrissnider>

This is what I'm using to monitor and graph only the cpu usage.  By adding
the noo to the options it graphs only the "input" or solid graph.  Or you
can use noi and it will graph only the "output" or line graph.  You will
need to enter the oid for what you want graphed twice in the Target section.
Hope this helps.  

Target[cpu]:1.3.6.1.4.1.232.11.2.3.1.1.2.0&.1.3.6.1.4.1.232.11.2.3.1.1.2.0:c
ommunity at MyServer
MaxBytes[cpu]: 100
routers.cgi*ShortDesc[cpu]:  CPU # 1
bb*svc[cpu]: cpu
bb*red[cpu]: 90
bb*yellow[cpu]: 80
Options[cpu]:  gauge, unknaszero, noo
Directory[cpu]: 
WithPeak[cpu]: wmy
YLegend[cpu]: % Utilization
ShortLegend[cpu]: %
Legend1[cpu]: Proc Load in next minute
Legend3[cpu]: Maximal 5 Minute Proc Load
LegendI[cpu]:  Load:
Title[cpu]: CPU 1 Load
PageTop[cpu]: <H1>Processor 1 Load</H1>

-----------------------------------------------
TAG/TMI 
Chris Snider
Systems Engineer
(402)479-0115 ext 13349
chris.snider at tagtmi.com
-----------------------------------------------


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Maurice Al-Khaliedy
Sent: Wednesday, January 14, 2004 9:57 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Graph with only one Value

Hello,

is it possible to graph only one value with mrtg ?
And how looks like the cfg file

e.g.

The output of a script give me only one value. 0 or 1.
The graph should show like a rectangle.

 y #
   #
 1 ########  #########################
   #      #  #
   #      #  #
 0 ###################################
                                    x


Ciao
Maurice

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Chris.Snider at Tagtmi.com  Wed Jan 14 22:49:02 2004
From: Chris.Snider at Tagtmi.com (Chris Snider)
Date: Wed, 14 Jan 2004 15:49:02 -0600
Subject: [mrtg] Re: Threshold script won't run
In-Reply-To: <20040114162850.96A8A152811@mailhost1.mistral.co.uk>
Message-ID: <003801c3dae8$392fd610$e862a8c0@chrissnider>

Adam,
What entry do you have before the <TABLE> information?  You should have
something like  

ThreshProgI[clay3_26_err]: /export/home/testpage.p
PageFoot[clay3_26_err]:
 <TABLE>
         <TR><TD>System:</TD><TD>Clay3 in Clayponds, Topfloor
House</TD></TR>
         <TR><TD>Maintainer:</TD><TD></TD></TR>
         <TR><TD>Description:</TD><TD>A   </TD></TR>
        <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
        <TR><TD>ifName:</TD>     <TD>A </TD></TR>
         <TR><TD>Max Speed:</TD><TD>100.0 Mbits/s</TD></TR>
 </TABLE>

If you have just the <TABLE> information right after the ThreshProgI then
mrtg thinks it needs to execute the program  /export/home/testpage.p <TABLE>
<TR><TD>System:</TD>     <TD>Clay3 in Clayponds, Topfloor House 3</TD></TR>
<TR><TD>Maintainer:</TD>
<TD></TD></TR> <TR><TD>Description:</TD><TD>A   </TD></TR>
<TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>ifName:</TD>     <TD>A </TD></TR> <TR><TD>Max Speed:</TD> 
<TD>100.0 Mbits/s</TD></TR> </TABLE>

Which of course is going to fail.

Try adding the PageFoot command before the Table and let me know if that
fixes it.

Thanks,
-----------------------------------------------
TAG/TMI 
Chris Snider
Systems Engineer
(402)479-0115 ext 13349
chris.snider at tagtmi.com
-----------------------------------------------


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of ghira at mistral.co.uk
Sent: Wednesday, January 14, 2004 10:29 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Threshold script won't run

I've looked up web pages about threshold scripts, and as far as I
can see I'm doing everything right. But it's not working, so there
must be something I'm missing...

I'm running MRTG 2.9.17 on a Solaris 8 machine. (I may upgrade
to a later version at some point).

Here's part of the config I'm trying to use:

Target[clay3_26_err]: `/export/home/httpd/mrtg/error.p`
#SetEnv[clay3_26_err]: MRTG_INT_IP="" MRTG_INT_DESCR="A "
MaxBytes[clay3_26_err]: 1
Title[clay3_26_err]: Error Analysis for 26 -- Clay3
PageTop[clay3_26_err]: <H1>Error Analysis for 26 -- Clay3</H1>
YLegend[clay3_26_err]: Errs per Mpkt
ThreshMaxI[clay3_26_err]: 1
#ThreshProgI[clay3_26_err]: /export/home/testpage.p

"testpage.p" is a perl script, and is executable. 

If I uncomment the ThreshProgI line, I get this:

usr/local/mrtg-2/bin/mrtg /export/home/httpd/mrtg/clay3demo.cfg 
ERROR: CFG Error in "threshprogi[clay3_26_err]", line 0: Threshold program
/export/home/testpage.p <TABLE> <TR><TD>System:</TD>     <TD>Clay3 in
Clayponds, Topfloor House 3</TD></TR> <TR><TD>Maintainer:</TD>
<TD></TD></TR> <TR><TD>Description:</TD><TD>A   </TD></TR>
<TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>ifName:</TD>     <TD>A </TD></TR> <TR><TD>Max Speed:</TD> 
<TD>100.0 Mbits/s</TD></TR> </TABLE> cannot be executed

The "table" stuff comes from lines immediately following the
threshprog line.

This also happened with a previous shell script version called testpage

Web pages I've looked at say that the name of the threshprog doesn't
need to be in quotes or backticks. What am I doing wrong?

-- 
Adam Atkinson
ghira at mistral.co.uk

---------------------------------------------
This message was sent using Mistral Webmail.
http://www.mistral.net


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From nick at mail.crlibrary.org  Wed Jan 14 23:00:35 2004
From: nick at mail.crlibrary.org (Nick Trenary)
Date: Wed, 14 Jan 2004 16:00:35 -0600
Subject: [mrtg] Pull Solaris stats from MRTG on Win2k
Message-ID: <6.0.0.22.0.20040114155659.01c64e18@mail.crlibrary.org>

I'm trying to configure MRTG running on Win2k.  I've been able to pull 
statistics from remote Win2k servers using Perfmon but I have not had any 
success with my Solaris 9 box.  I've searched the web and haven't had any 
success in finding any info on the setup process.  If anyone could point me 
in the right direction I would greatly appreciate it.
Thanks,
Nick

----
Nick Trenary
Computer Information Systems Analyst
<http://www.crlibrary.org/>Cedar Rapids Public Library
(319) 398-5145 x267  

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Wed Jan 14 23:06:28 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Wed, 14 Jan 2004 22:06:28 -0000
Subject: [mrtg] MRTG errors... Please help
Message-ID: <200401142206.i0EM6vTL022532@knockout.kirtland.af.mil>


I'm sorry if this has been answered over and over again, but I can't seem to
find anything that will help me narrow down my trouble.  I've looked through
the FAQ's and done google searches, but nothing has come close to helping
me.  I hope someone can help me by pointing out what I've been doing wrong.
I'm using Redhat 9.0.  Any help would be great.  Thanks in advance!  

I'm trying to monitor one temperature unit.  This is what's in my mrtg.cfg
file:

####################################################################
Target[BLD47-107]: `/usr/local/nagios/libexec/mrtg_temptraxe -H 10.10.10.10
-p 1`
MaxBytes[BLD47-107]: 200
Title[BLD47-107]: Building 4, Lab 7
PageTop[BLD47-107]: <H1> Lab 107 Temperature </H1>
Options[BLD47-107]: growright,gauge,nopercent
YLegend[BLD47-107]: Deg Farenheit
ShortLegend[BLD47-107]: &nbsp;
LegendI[BLD47-107]: &nbsp;Temperature:
Legend1[BLD47-107]: Temperature
Legend3[BLD47-107]: Maximal 5 Minute Temperature
###################################################################

When I run "/usr/local/mrtg-2/bin/mrtg /var/www/html/mrtg/mrtg.cfg" I get an
error I can't figure out.  I've tried adjust the file but I still get the
error below.  The strange thing is that it appears that it's really working
because my graph is growing and the temperature is correct most of the time.

####################################################################
[root at Nagios libexec]# /usr/local/mrtg-2/bin/mrtg
/var/www/html/mrtg/mrtg.cfg
WARNING: Problem with External get '/usr/local/nagios/libexec/mrtg_temptraxe
-H 10.10.10.10 -p 1':
   Expected a Number for 'out' but nothing'
#####################################################################
(running the command it's trying to run from the command line)

[root at Nagios html]# /usr/local/nagios/libexec/mrtg_temptraxe -H
129.238.159.44 -p 1
70
#####################################################################

In the FAQ's it says that this is due to outputs given in fraction, white
space or not output.  Well, I've checked all of that and I do get a whole
number and there is not white space.  I'm stumped.  Has anyone had this
problem?  Any help would be great.

Mike

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From vk2ydh at hotmail.com  Wed Jan 14 23:19:03 2004
From: vk2ydh at hotmail.com (vk2ydh)
Date: Thu, 15 Jan 2004 09:19:03 +1100
Subject: [mrtg] Re: MRTG errors... Please help
References: <200401142206.i0EM6vTL022532@knockout.kirtland.af.mil>
Message-ID: <Law10-OE57IS8OvUGCs0002fe71@hotmail.com>

Michael,

MRTG expects to see 4 variables returned by the external script separated by
newline characters. You seem to be only returning 1.

eg

in
out
something
somethingelese

Check the mrtg script examples in the doco.


----- Original Message ----- 
From: "Johnston Michael J Contr AFRL/DES" <michael.johnston at kirtland.af.mil>
To: <mrtg at list.ee.ethz.ch>
Sent: Thursday, January 15, 2004 9:06 AM
Subject: [mrtg] MRTG errors... Please help


>
> I'm sorry if this has been answered over and over again, but I can't seem
to
> find anything that will help me narrow down my trouble.  I've looked
through
> the FAQ's and done google searches, but nothing has come close to helping
> me.  I hope someone can help me by pointing out what I've been doing
wrong.
> I'm using Redhat 9.0.  Any help would be great.  Thanks in advance!
>
> I'm trying to monitor one temperature unit.  This is what's in my mrtg.cfg
> file:
>
> ####################################################################
> Target[BLD47-107]: `/usr/local/nagios/libexec/mrtg_temptraxe -H
10.10.10.10
> -p 1`
> MaxBytes[BLD47-107]: 200
> Title[BLD47-107]: Building 4, Lab 7
> PageTop[BLD47-107]: <H1> Lab 107 Temperature </H1>
> Options[BLD47-107]: growright,gauge,nopercent
> YLegend[BLD47-107]: Deg Farenheit
> ShortLegend[BLD47-107]: &nbsp;
> LegendI[BLD47-107]: &nbsp;Temperature:
> Legend1[BLD47-107]: Temperature
> Legend3[BLD47-107]: Maximal 5 Minute Temperature
> ###################################################################
>
> When I run "/usr/local/mrtg-2/bin/mrtg /var/www/html/mrtg/mrtg.cfg" I get
an
> error I can't figure out.  I've tried adjust the file but I still get the
> error below.  The strange thing is that it appears that it's really
working
> because my graph is growing and the temperature is correct most of the
time.
>
> ####################################################################
> [root at Nagios libexec]# /usr/local/mrtg-2/bin/mrtg
> /var/www/html/mrtg/mrtg.cfg
> WARNING: Problem with External get
'/usr/local/nagios/libexec/mrtg_temptraxe
> -H 10.10.10.10 -p 1':
>    Expected a Number for 'out' but nothing'
> #####################################################################
> (running the command it's trying to run from the command line)
>
> [root at Nagios html]# /usr/local/nagios/libexec/mrtg_temptraxe -H
> 129.238.159.44 -p 1
> 70
> #####################################################################
>
> In the FAQ's it says that this is due to outputs given in fraction, white
> space or not output.  Well, I've checked all of that and I do get a whole
> number and there is not white space.  I'm stumped.  Has anyone had this
> problem?  Any help would be great.
>
> Mike
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Wed Jan 14 23:26:27 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Wed, 14 Jan 2004 22:26:27 -0000
Subject: [mrtg] Re: MRTG errors... Please help
Message-ID: <200401142228.i0EMSjTJ027995@knockout.kirtland.af.mil>

Thank you for your response.  I would very much like to look at some
examples.  Where would I find the doco?  Is that a site somewhere?  Please
excuse my ignorance.

-----Original Message-----
From: vk2ydh [mailto:vk2ydh at hotmail.com]
Sent: Wednesday, January 14, 2004 3:19 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: MRTG errors... Please help


Michael,

MRTG expects to see 4 variables returned by the external script separated by
newline characters. You seem to be only returning 1.

eg

in
out
something
somethingelese

Check the mrtg script examples in the doco.


----- Original Message ----- 
From: "Johnston Michael J Contr AFRL/DES" <michael.johnston at kirtland.af.mil>
To: <mrtg at list.ee.ethz.ch>
Sent: Thursday, January 15, 2004 9:06 AM
Subject: [mrtg] MRTG errors... Please help


>
> I'm sorry if this has been answered over and over again, but I can't seem
to
> find anything that will help me narrow down my trouble.  I've looked
through
> the FAQ's and done google searches, but nothing has come close to helping
> me.  I hope someone can help me by pointing out what I've been doing
wrong.
> I'm using Redhat 9.0.  Any help would be great.  Thanks in advance!
>
> I'm trying to monitor one temperature unit.  This is what's in my mrtg.cfg
> file:
>
> ####################################################################
> Target[BLD47-107]: `/usr/local/nagios/libexec/mrtg_temptraxe -H
10.10.10.10
> -p 1`
> MaxBytes[BLD47-107]: 200
> Title[BLD47-107]: Building 4, Lab 7
> PageTop[BLD47-107]: <H1> Lab 107 Temperature </H1>
> Options[BLD47-107]: growright,gauge,nopercent
> YLegend[BLD47-107]: Deg Farenheit
> ShortLegend[BLD47-107]: &nbsp;
> LegendI[BLD47-107]: &nbsp;Temperature:
> Legend1[BLD47-107]: Temperature
> Legend3[BLD47-107]: Maximal 5 Minute Temperature
> ###################################################################
>
> When I run "/usr/local/mrtg-2/bin/mrtg /var/www/html/mrtg/mrtg.cfg" I get
an
> error I can't figure out.  I've tried adjust the file but I still get the
> error below.  The strange thing is that it appears that it's really
working
> because my graph is growing and the temperature is correct most of the
time.
>
> ####################################################################
> [root at Nagios libexec]# /usr/local/mrtg-2/bin/mrtg
> /var/www/html/mrtg/mrtg.cfg
> WARNING: Problem with External get
'/usr/local/nagios/libexec/mrtg_temptraxe
> -H 10.10.10.10 -p 1':
>    Expected a Number for 'out' but nothing'
> #####################################################################
> (running the command it's trying to run from the command line)
>
> [root at Nagios html]# /usr/local/nagios/libexec/mrtg_temptraxe -H
> 129.238.159.44 -p 1
> 70
> #####################################################################
>
> In the FAQ's it says that this is due to outputs given in fraction, white
> space or not output.  Well, I've checked all of that and I do get a whole
> number and there is not white space.  I'm stumped.  Has anyone had this
> problem?  Any help would be great.
>
> Mike
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Chris.Snider at Tagtmi.com  Wed Jan 14 23:34:04 2004
From: Chris.Snider at Tagtmi.com (Chris Snider)
Date: Wed, 14 Jan 2004 16:34:04 -0600
Subject: [mrtg] Re: Pull Solaris stats from MRTG on Win2k
In-Reply-To: <6.0.0.22.0.20040114155659.01c64e18@mail.crlibrary.org>
Message-ID: <004201c3daee$83a2ebf0$e862a8c0@chrissnider>

You might try using going to http://www.net-snmp.org/ they will have the
information you need to install this and run it on Solaris.

Thanks,
-----------------------------------------------
TAG/TMI 
Chris Snider
Systems Engineer
(402)479-0115 ext 13349
chris.snider at tagtmi.com
-----------------------------------------------


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Nick Trenary
Sent: Wednesday, January 14, 2004 4:01 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Pull Solaris stats from MRTG on Win2k

I'm trying to configure MRTG running on Win2k.  I've been able to pull 
statistics from remote Win2k servers using Perfmon but I have not had any 
success with my Solaris 9 box.  I've searched the web and haven't had any 
success in finding any info on the setup process.  If anyone could point me 
in the right direction I would greatly appreciate it.
Thanks,
Nick

----
Nick Trenary
Computer Information Systems Analyst
<http://www.crlibrary.org/>Cedar Rapids Public Library
(319) 398-5145 x267  

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From BenC at dcpud.org  Thu Jan 15 01:42:52 2004
From: BenC at dcpud.org (Ben Carter)
Date: Wed, 14 Jan 2004 16:42:52 -0800
Subject: [mrtg] WARNING: Expected a number but got 'NaN'
Message-ID: <086DA1AD7FF03846A8B299B9E1E2D39B64DE11@xam.dc.pud>

I hope I am not missing anything obvious.
 

When I attempt to monitor one of our Telco Systems switches, I get the
following message " WARNING: Expected a number but got 'NaN' ".
Searching the list archives revealed that NaN can be generated when an
out of bounds result (too big) is encountered. The number I /can/ get
using snmpwalk is not larger than 4,294,967,295, the largest number the
32 bit ifInOctet and ifOut counters can represent, so this does not
appear to be the case. 

 

This error occurs with the default cfg file generated with cfgmaker, and
when I manually specify the OID in the cfg file. Using snmpget on this
same OID returns a good value. Also, HP Openview is able to plot what I
would interpret as an accurate utilization rate on this interface, so I
know it is working. I have tried using the following settings in the
config, to no avail: 

 

NoMib2: Yes

use_16bit_request_ids     => 0
lenient_source_port_matching => 1

lenient_source_address_matching => 0

 

 

 

.1.3.6.1.2.1.2.2.1.10.9&.1.3.6.1.2.1.2.2.1.16.9:public at 1.2.3.4 This is
the target line I have been using (along with the default line). I can
type in snmpget .1.3.6.1.2.1.2.2.1.10.9 public and it works like a
charm. The value just returned as I type this is 2477027319, then
2541404293 a few seconds later (this is a Gig link running 2 4-6 Mbps
Mpeg 2 streams).

 

Thanks for any help!

 

Ben Carter

Network Analyst

Douglas County PUD

1151 Valley mall Parkway

East Wenatchee WA, 98802

Voice: (509) 884-7191

Fax:    (509) 884-0553

 

 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Jason.Harper at asu.edu  Thu Jan 15 01:43:48 2004
From: Jason.Harper at asu.edu (Jason Harper)
Date: Wed, 14 Jan 2004 17:43:48 -0700
Subject: [mrtg] Data problem with absolute option
Message-ID: <41C5C216FAB08E438587145FCB1DF3001FDB7D@ex4.asurite.ad.asu.edu>

First off, I use mrtg for bandwidth usage monitoring and it works great
for that (thanks to everyone who has written or contributed to mrtg!)

I'm trying to graph usage activity for a web application.  The
application inserts a row in an SQL table roughly for each transaction.
So, my approach was this:

Create a perl script which counts the number of new records in the table
since the script was last run, prints that value on the first two lines
of output, and then prints two more lines of dummy text (for uptime and
system name).  The output of the perl script looks something like this:

----
257
257
uptime
atrecords
----

Pretty simple.  It is basically a counter that resets to zero whenever
it is run.  This sounds exactly like the "absolute" option in mrtg.  So
here is the relevant section of my mrtg.cfg:

Title[intsite-atrecords]: ASU Interactive AUDIT_TRAIL Activity
MaxBytes[intsite-atrecords]: 1000000
Options[intsite-atrecords]:
perminute,absolute,growright,nopercent,noo,pngdate,noinfo
Target[intsite-atrecords]: `/home/mrtg/getATrecords.pl`
PageTop[intsite-atrecords]: <H1>ASU Interactive AUDIT_TRAIL Activity
(records per minute)
YLegend[intsite-atrecords]: records/minute
ShortLegend[intsite-atrecords]: records/min
Legend1[intsite-atrecords]: Avg Records/minute
Legend2[intsite-atrecords]: Avg Records/minute
Legend3[intsite-atrecords]: Peak/max Records/minute
Legend4[intsite-atrecords]: Peak/max Records/minute
LegendI[intsite-atrecords]: &nbsp;Records/min:
LegendO[intsite-atrecords]: &nbsp;Records/min:
WithPeak[intsite-atrecords]: ymw

Since the values will be smallish, I wanted per-minute counts, not
per-second.  Mrtg is running every 5 minutes.

All was well until I was suspicious of how low the graphed values
seemed.  So, I modified my perl script to log to a file the values that
it returns to mrtg.  Sure enough, the values are a lot higher than what
mrtg appears to be graphing and displaying in the html.  Here's an
example of the data points since I last wiped out my intsite-atrecords.*
files to start it all over.  The first record is when I ran mrtg
manually the first time:

Jan 14 2004  4:03:48:833PM-231
Jan 14 2004  4:05:01:046PM-91
Jan 14 2004  4:10:01:333PM-300
Jan 14 2004  4:15:00:513PM-382
Jan 14 2004  4:20:00:643PM-370
Jan 14 2004  4:25:00:790PM-313
Jan 14 2004  4:30:00:983PM-291
Jan 14 2004  4:35:01:220PM-402
Jan 14 2004  4:40:01:390PM-265
Jan 14 2004  4:45:00:676PM-280
Jan 14 2004  4:50:00:836PM-242
Jan 14 2004  4:55:00:993PM-275
Jan 14 2004  5:00:01:143PM-253
Jan 14 2004  5:05:01:393PM-267
Jan 14 2004  5:10:00:563PM-299
Jan 14 2004  5:15:01:676PM-255
Jan 14 2004  5:20:00:820PM-257
Jan 14 2004  5:25:01:200PM-321
Jan 14 2004  5:29:59:833PM-261

That is the date/time the script was run (according to the SQL server..
It's the date I use in the select statement so that I only count new
records) followed by a dash and the value that it returned on line 1 and
line 2 to mrtg.  Some quick division shows that the lowest value at 4:50
was about 48.4 records per minute and the highest at 4:35 was 80.4
records per minute.  But, that's not at all what my mrtg graphs and html
pages show.  Take a look at:

http://rgweb.vpsa.asu.edu/intsite/mrtg/email/
Or more specifically
http://rgweb.vpsa.asu.edu/intsite/mrtg/email/intsite-atrecords.html

The graph shows a peak of 41 at the beginning but looks nothing at all
like the data above.  

Ideas?  Did I miss something simple?

I don't know how to interpret mrtg's .log file, but here are the first
several lines:
1074126601 261 261
1074126601 13 13 13 13
1074126301 13 13 13 13
1074126300 12 12 13 13
1074126000 0 0 6 6
1074125700 6 6 6 6
1074125400 5 5 6 6
1074125100 2 2 3 3
1074124800 1 1 1 1
1074124500 1 1 3 3
1074124200 3 3 3 3
1074123900 3 3 22 22
1074123600 22 22 22 22
1074123300 21 21 22 22
1074123000 16 16 16 16
1074122700 16 16 16 16
1074122400 16 16 16 16
1074122100 16 16 42 42
1074121800 41 41 42 42
1074121500 0 0 0 0
1074121200 0 0 0 0
(the rest are zeros)

The first line looks like the most recent reading that it was given....
I don't know what significance that has...


Thanks for any advise
Jason

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Jason.Harper at asu.edu  Thu Jan 15 01:49:29 2004
From: Jason.Harper at asu.edu (Jason Harper)
Date: Wed, 14 Jan 2004 17:49:29 -0700
Subject: [mrtg] Re: Data problem with absolute option
Message-ID: <41C5C216FAB08E438587145FCB1DF30003480680@ex4.asurite.ad.asu.edu>


I knew I would forget the version .. I'm using mrtg-2.10.12  with perl
v5.8.0 (RedHat 9)

Thanks

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Jason Harper
Sent: Wednesday, January 14, 2004 5:44 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Data problem with absolute option

First off, I use mrtg for bandwidth usage monitoring and it works great
for that (thanks to everyone who has written or contributed to mrtg!)

I'm trying to graph usage activity for a web application.  The
application inserts a row in an SQL table roughly for each transaction.
So, my approach was this:

Create a perl script which counts the number of new records in the table
since the script was last run, prints that value on the first two lines
of output, and then prints two more lines of dummy text (for uptime and
system name).  The output of the perl script looks something like this:

----
257
257
uptime
atrecords
----

Pretty simple.  It is basically a counter that resets to zero whenever
it is run.  This sounds exactly like the "absolute" option in mrtg.  So
here is the relevant section of my mrtg.cfg:

Title[intsite-atrecords]: ASU Interactive AUDIT_TRAIL Activity
MaxBytes[intsite-atrecords]: 1000000
Options[intsite-atrecords]:
perminute,absolute,growright,nopercent,noo,pngdate,noinfo
Target[intsite-atrecords]: `/home/mrtg/getATrecords.pl`
PageTop[intsite-atrecords]: <H1>ASU Interactive AUDIT_TRAIL Activity
(records per minute)
YLegend[intsite-atrecords]: records/minute
ShortLegend[intsite-atrecords]: records/min
Legend1[intsite-atrecords]: Avg Records/minute
Legend2[intsite-atrecords]: Avg Records/minute
Legend3[intsite-atrecords]: Peak/max Records/minute
Legend4[intsite-atrecords]: Peak/max Records/minute
LegendI[intsite-atrecords]: &nbsp;Records/min:
LegendO[intsite-atrecords]: &nbsp;Records/min:
WithPeak[intsite-atrecords]: ymw

Since the values will be smallish, I wanted per-minute counts, not
per-second.  Mrtg is running every 5 minutes.

All was well until I was suspicious of how low the graphed values
seemed.  So, I modified my perl script to log to a file the values that
it returns to mrtg.  Sure enough, the values are a lot higher than what
mrtg appears to be graphing and displaying in the html.  Here's an
example of the data points since I last wiped out my intsite-atrecords.*
files to start it all over.  The first record is when I ran mrtg
manually the first time:

Jan 14 2004  4:03:48:833PM-231
Jan 14 2004  4:05:01:046PM-91
Jan 14 2004  4:10:01:333PM-300
Jan 14 2004  4:15:00:513PM-382
Jan 14 2004  4:20:00:643PM-370
Jan 14 2004  4:25:00:790PM-313
Jan 14 2004  4:30:00:983PM-291
Jan 14 2004  4:35:01:220PM-402
Jan 14 2004  4:40:01:390PM-265
Jan 14 2004  4:45:00:676PM-280
Jan 14 2004  4:50:00:836PM-242
Jan 14 2004  4:55:00:993PM-275
Jan 14 2004  5:00:01:143PM-253
Jan 14 2004  5:05:01:393PM-267
Jan 14 2004  5:10:00:563PM-299
Jan 14 2004  5:15:01:676PM-255
Jan 14 2004  5:20:00:820PM-257
Jan 14 2004  5:25:01:200PM-321
Jan 14 2004  5:29:59:833PM-261

That is the date/time the script was run (according to the SQL server..
It's the date I use in the select statement so that I only count new
records) followed by a dash and the value that it returned on line 1 and
line 2 to mrtg.  Some quick division shows that the lowest value at 4:50
was about 48.4 records per minute and the highest at 4:35 was 80.4
records per minute.  But, that's not at all what my mrtg graphs and html
pages show.  Take a look at:

http://rgweb.vpsa.asu.edu/intsite/mrtg/email/
Or more specifically
http://rgweb.vpsa.asu.edu/intsite/mrtg/email/intsite-atrecords.html

The graph shows a peak of 41 at the beginning but looks nothing at all
like the data above.  

Ideas?  Did I miss something simple?

I don't know how to interpret mrtg's .log file, but here are the first
several lines:
1074126601 261 261
1074126601 13 13 13 13
1074126301 13 13 13 13
1074126300 12 12 13 13
1074126000 0 0 6 6
1074125700 6 6 6 6
1074125400 5 5 6 6
1074125100 2 2 3 3
1074124800 1 1 1 1
1074124500 1 1 3 3
1074124200 3 3 3 3
1074123900 3 3 22 22
1074123600 22 22 22 22
1074123300 21 21 22 22
1074123000 16 16 16 16
1074122700 16 16 16 16
1074122400 16 16 16 16
1074122100 16 16 42 42
1074121800 41 41 42 42
1074121500 0 0 0 0
1074121200 0 0 0 0
(the rest are zeros)

The first line looks like the most recent reading that it was given....
I don't know what significance that has...


Thanks for any advise
Jason

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From ghira at mistral.co.uk  Thu Jan 15 05:40:47 2004
From: ghira at mistral.co.uk (Adam Atkinson)
Date: 15 Jan 2004 4:40:47 +0000
Subject: [mrtg] Re: Threshold script won't run
In-Reply-To: <003801c3dae8$392fd610$e862a8c0@chrissnider>
Message-ID: <1077.510T2390T2804635ghira@mistral.co.uk>

On 14-Jan-04 21:49:02, Chris Snider said:
>Adam,
>What entry do you have before the <TABLE> information?  You should have
>something like  

>ThreshProgI[clay3_26_err]: /export/home/testpage.p
>PageFoot[clay3_26_err]:

> <TABLE>

Ah... I made the config file by using configmaker to start off with
then pruning/editing it. I must have pruned over-zealously. Whoops.

>If you have just the <TABLE> information right after the ThreshProgI then
>mrtg thinks it needs to execute the program  /export/home/testpage.p <TABLE>

>Which of course is going to fail.

Yes. I tried quotes and so on but it didn't help. I should have looked
at the pre-pruning version again a bit more carefully. Sorry about
this.

>Try adding the PageFoot command before the Table and let me know if that
>fixes it.

Will do.

-- 
Adam Atkinson (ghira at mistral.co.uk) But what *IS* the internet? It's
the largest equivalence class in the reflexive transitive symmetric
closure of the relationship "can be reached by an IP packet from".

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From girts.legzdins at energo.lv  Thu Jan 15 07:22:43 2004
From: girts.legzdins at energo.lv (Girts Legzdinsh)
Date: Thu, 15 Jan 2004 08:22:43 +0200
Subject: [mrtg] Re: In place of (daily: 5 minute average) I need (daily: 1 minute averaga)
References: <000001c3daba$8b7cccd0$e862a8c0@chrissnider>
Message-ID: <00f601c3db2f$fc1e35d0$4a25010a@GLegzdinsNote>

i tried, but....

ERROR: CFG Error in "Interval": should be at least 5 Minutes (unless you use
rrdtool) at /root/acid/mrtg-proj/mrtg/bin/../lib/mrtg2/MRTG_lib.pm line 682.

i'm not using rrdtool...
so there are not another ways to limit the interval to 1 min, without
rrdtool?

Girts Legzdins
Network Administrator
Latvenergo
Technical Center
Latvia
girts.legzdins at latvenergo.lv

----- Original Message ----- 
From: <mrtg-bounce at list.ee.ethz.ch>
To: "'Girts Legzdinsh'" <girts.legzdins at energo.lv>; "'mrtg-liste'"
<mrtg at list.ee.ethz.ch>
Sent: Wednesday, January 14, 2004 6:22 PM
Subject: [mrtg] Re: In place of (daily: 5 minute average) I need (daily: 1
minute averaga)


What you will need to do is add Interval: 1 to the global section of you
config file.  That should do it.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Girts Legzdinsh
Sent: Wednesday, January 14, 2004 10:08 AM
To: mrtg-liste
Subject: [mrtg] In place of (daily: 5 minute average) I need (daily: 1
minute averaga)

that's my problem
i'm a newbie in mrtg stuff..
so I want that the first graph is a 1 minute average and it must show the
exact information..
in which config files and what do I need to replace or add?

thanks

Girts Legzdins
Network Administrator
Latvenergo
Technical Center
Latvia
girts.legzdins at latvenergo.lv

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From artemacabro at www.artemacabro.com.ar  Thu Jan 15 12:10:13 2004
From: artemacabro at www.artemacabro.com.ar (artemacabro)
Date: Thu, 15 Jan 2004 08:10:13 -0300
Subject: [mrtg] Snmp + Mrtg --> Problems 
Message-ID: <20040115110922.M27247@www.artemacabro.com.ar>

Snmp + Mrtg --> Problems 
Hi!

My problem is that when i run the "cfgmaker" for make the mrtg.cfg

I got this message:


SNMPv1_Session (remote host: "192.168.0.183" [192.168.0.183].161)
community: "private"
request ID: -1648810399
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 622
SNMPWALK Problem for 1.3.6.1.2.1.1 on private at 192.168.0.183::::::v4only
at ./cfgmaker line 825
WARNING: Skipping private at 192.168.0.183: as no info could be retrieved

--base: Writing /etc/mrtg.cfg


And if I do an "snmpget" I got


server# snmpget 192.168.0.183 public v4only
v4only: Unknown Object Identifier (Sub-id not found: (top) -> v4only) 

Sorry if a silly question, but the way is that I'm trying to learn not to 
make more silly questions 

Thank's for all the one who can help me!


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From m.eldesoky at tedata.net  Thu Jan 15 12:44:31 2004
From: m.eldesoky at tedata.net (Mohamed Eldesoky)
Date: Thu, 15 Jan 2004 13:44:31 +0200
Subject: [mrtg] Re: Graphs with fixed vertical scale
In-Reply-To: <20040108180527.23878.qmail@web60503.mail.yahoo.com>
References: <20040108180527.23878.qmail@web60503.mail.yahoo.com>
Message-ID: <200401151344.34625.m.eldesoky@tedata.net>

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

use:  unscale

Check the documentation.

Regards
Mohamed Eldesoky


On Thursday 08 January 2004 8:05 pm, Joubin Moshrefzadeh wrote:
> I'm sure someone's already asked this question, but I wasn't able to find
> it in the archives or on google. So here it is:
>
> Is there a way to have MRTG produce graphs with the same vertical scale.
> i.e. for a 100 Mb interface, i want the graphs to always have a 0-100 Mbit
> scale, etc.
>
> Thanks!
> Joubin
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQFABn0i2FHsOWMJBKMRAm10AJ9+KMuUF4cX38U3HIT9Y5lXQs+25wCeKaWS
6CTG/29TmrJMwtf6nCTxGHg=
=qGiX
-----END PGP SIGNATURE-----

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From yamtak at b-session.com  Thu Jan 15 13:05:14 2004
From: yamtak at b-session.com (Takumi Yamane)
Date: Thu, 15 Jan 2004 21:05:14 +0900
Subject: [mrtg] Re: Snmp + Mrtg --> Problems 
In-Reply-To: <20040115110922.M27247@www.artemacabro.com.ar>
References: <20040115110922.M27247@www.artemacabro.com.ar>
Message-ID: <20040115120523.61611D9371@ntardis.ee.ethz.ch>

Hi,

On Thu, 15 Jan 2004 08:10:13 -0300, "artemacabro" wrote 
in <20040115110922.M27247 at www.artemacabro.com.ar>:
> 
> My problem is that when i run the "cfgmaker" for make the mrtg.cfg
...
> SNMPWALK Problem for 1.3.6.1.2.1.1 on private at 192.168.0.183::::::
> v4only at ./cfgmaker line 825

Check your snmpd.conf IF you are running Linux box.


> And if I do an "snmpget" I got

Try this one:
  snmpget your-agent community-string .1.3.6.1.2.1.1.1.0

There is something wrong with your snmpd.conf(or agent's settings) 
if it doesn't work.


Would you care to provide these info?
+ What is your agent's OS/version?
+ What is your host's OS/version, which MRTG is running on?
+ What is your MRTG version?

--
Takumi Yamane <yamtak at b-session.com>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From petelists at templin.org  Thu Jan 15 14:34:34 2004
From: petelists at templin.org (Pete Templin)
Date: Thu, 15 Jan 2004 07:34:34 -0600
Subject: [mrtg] Re: In place of (daily: 5 minute average) I need (daily:
 1 minute averaga)
In-Reply-To: <00f601c3db2f$fc1e35d0$4a25010a@GLegzdinsNote>
References: <000001c3daba$8b7cccd0$e862a8c0@chrissnider> <00f601c3db2f$fc1e35d0$4a25010a@GLegzdinsNote>
Message-ID: <400696EA.50507@templin.org>



Girts Legzdinsh wrote:
> ERROR: CFG Error in "Interval": should be at least 5 Minutes (unless you use
> rrdtool) at /root/acid/mrtg-proj/mrtg/bin/../lib/mrtg2/MRTG_lib.pm line 682.
> 
> i'm not using rrdtool...
> so there are not another ways to limit the interval to 1 min, without
> rrdtool?

Ummm....write a new tool?  Download the source code and rewrite the 
affected portions of the code?

Change to rrdtool?

Just a few thoughts.

pt

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From mastercchri at hotmail.com  Thu Jan 15 15:40:12 2004
From: mastercchri at hotmail.com (Cory Chrisinger)
Date: Thu, 15 Jan 2004 08:40:12 -0600
Subject: [mrtg] cricket
Message-ID: <BAY1-F64u4DfBhJcNJM0001ec35@hotmail.com>

Does anyone know if there is a mailing list for the Cricket monitoring 
software?

Thanks,

Cory

_________________________________________________________________
Rethink your business approach for the new year with the helpful tips here. 
http://special.msn.com/bcentral/prep04.armx

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From GWCOOK at mactec.com  Thu Jan 15 15:42:28 2004
From: GWCOOK at mactec.com (Cook, Garry)
Date: Thu, 15 Jan 2004 07:42:28 -0700
Subject: [mrtg] Re: cricket
Message-ID: <41FD7929498A174DAB86C45F28E0EC0D09F21B@golden-m.mactec.com>

> Does anyone know if there is a mailing list for the Cricket monitoring
> software?

Yes. You can find it on their site, at cricket.sourceforge.net.

Garry W. Cook, CCNA
Network Infrastructure Manager
MACTEC, Inc. - http://www.mactec.com/
303.308.6228 (Office) - 720.220.1862 (Mobile)

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From msanford at ascensionhealth.org  Thu Jan 15 18:09:16 2004
From: msanford at ascensionhealth.org (Michael Sanford)
Date: Thu, 15 Jan 2004 11:09:16 -0600
Subject: [mrtg] Re: Too many lock files
Message-ID: <21997C15EC2FB448B11B99B8CAD4AF286FE951@evv1exch.evv1.icorp.ahealth.org>
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--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From lcjones at mis.net  Thu Jan 15 18:04:22 2004
From: lcjones at mis.net (Les Jones)
Date: Thu, 15 Jan 2004 12:04:22 -0500
Subject: [mrtg] 7206 & Hundreds of DSL Interfaces
Message-ID: <4006C816.10507@mis.net>

Folks,

We are using a 7206 VXR with a 400 engine to manage our DSL users.
We have 600 + interfaces and growing.


Is anyone graphing large amounts of DSL interfaces with mrtg?
If so, how do you handle the multitude of html pages?
What is the impact of so many SNMP requests on your router?

Thanks,

Les Jones
Network Staff - NOC
Mikrotec Internet Services
1001 Winchester Road
Lexington, KY 40419
859-231-1231 x22
lcjones @ mikrotec.com
swip @ mikrotec.com
*************************

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From rcastro at dsi.uanl.mx  Thu Jan 15 18:53:35 2004
From: rcastro at dsi.uanl.mx (Ramses Jacinto Castro)
Date: Thu, 15 Jan 2004 11:53:35 -0600
Subject: [mrtg] error whit leng
Message-ID: <325b43170b.3170b325b4@uanl.mx>


  Hi there, I have all ready ask this before so I apologyze for do it
again but we have a problem whit some HD  and some info where lost, any
way I really sorry to bother whit this one mote time.

I normaly use MRTG on a Windows server, but recently I have to migrate
to a Linux server, the install was no prob but in the moment to compile
the .cfg file this error is display

-----------------------------------------------------------------------
ERROR: Mrtg will most likely not work propperly when the environment
       variable LANG is set to UTF-8. Please run mrtg in an environment
       where this is not the case:
 
       env LANG=C ./mrtg ...
-----------------------------------------------------------------------

tks for the help

Best regards


 Atte: Rams?s Jacinto Castro
 Universidad Autonoma de Nuevo Le?n
 Laboratorio de Interoperabilidad
 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jmosh at shaw.ca  Thu Jan 15 18:55:49 2004
From: jmosh at shaw.ca (jmosh at shaw.ca)
Date: Thu, 15 Jan 2004 09:55:49 -0800
Subject: [mrtg] Re: Too many lock files
Message-ID: <765ad276687c.76687c765ad2@shaw.ca>

Cool... I'll look into that. Mind you, even though I've enabled logging and have specified "debug" as well, so I get as verbose a message as possible, all I get for log messages is "...Date... ...Time... -- Started mrtg". (I'm hoping thats becuase whatever was causing the problem is no longer there)

Anyway, I should be ok to delete all these lock files  right? 

thanks for any input,
Joubin

----- Original Message -----
From: Michael Sanford <msanford at ascensionhealth.org>
Date: Thursday, January 15, 2004 9:09 am
Subject: RE: [mrtg] Too many lock files

> >I'm finding there are a lot of lock files for some of my configs, 
> thatlook >like this: device1.cfg_l_1234 
> >
> >Can anyone explain why I'm seeing this kind of behaviour. I'm 
> running 
> >mrtg-2.9.17-13 or a Redhat 9 box.
> 
> When I saw this on my AIX box it was due to the 2nd (or 3rd, or 
> 4th) run
> of a config being submitted by cron (running at 5 minute intervals)
> before the 1st had completed.  I had two issues causing this: some 
> SNMPresponse problems and lack of system resources.  I found the SNMP
> problems by looking in the log files that you now have set up and the
> resource problem with various AIX system commands (ps, vmstat, etc.).
> HTH
> 
> Mike
> 
> 
> 
> NOTE: This e-mail message may contain information that may be 
> privileged, confidential, and exempt from disclosure. It is 
> intended for use only by the person to whom it is addressed. If 
> you have received this message in error, please do not forward or 
> use this information in any way, delete it immediately, and 
> contact the sender as soon as possible by the reply option or by 
> telephone at the telephone number listed (if available). Thank you.
> 
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From simon.strutt at thomson.com  Thu Jan 15 19:01:45 2004
From: simon.strutt at thomson.com (Strutt, Simon)
Date: Thu, 15 Jan 2004 18:01:45 -0000
Subject: [mrtg] Re: 7206 & Hundreds of DSL Interfaces
Message-ID: <593B8AD58C99D511ABD900062939CB41021AB5C2@tfukwokmsg01.datastream.com>

I have a couple of large switches with 256 interfaces, and have no problems,
if you monitor the processor usage you can't tell when the SNMP requests
hit.  Though this obviously isn't up to your magnitude, or on a similar
device.  
If you're worried about the hit on the router, you could split your config
file up, and start them at intervals spread across 5 mins.  I'd be tempted
to start with one big config file, and fire it off (not as a daemon) while
keeping an eye on your routers processor usage (probably best done well out
of hours !).

You can create an index(s) of your webpages easily using the indexmaker,
making the 100's of pages easily accessible.

Regards
Simon

-----Original Message-----
From: Les Jones [mailto:lcjones at mis.net]
Sent: 15 January 2004 17:04
To: MRTG List
Subject: [mrtg] 7206 & Hundreds of DSL Interfaces


Folks,

We are using a 7206 VXR with a 400 engine to manage our DSL users.
We have 600 + interfaces and growing.


Is anyone graphing large amounts of DSL interfaces with mrtg?
If so, how do you handle the multitude of html pages?
What is the impact of so many SNMP requests on your router?

Thanks,

Les Jones
Network Staff - NOC
Mikrotec Internet Services
1001 Winchester Road
Lexington, KY 40419
859-231-1231 x22
lcjones @ mikrotec.com
swip @ mikrotec.com
*************************

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


"This communication is intended solely for the addressee and is confidential and not for third party unauthorised distribution."



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From hackerwacker at cybermesa.com  Thu Jan 15 19:13:41 2004
From: hackerwacker at cybermesa.com (james)
Date: Thu, 15 Jan 2004 11:13:41 -0700
Subject: [mrtg] Re: 7206 & Hundreds of DSL Interfaces
References: <593B8AD58C99D511ABD900062939CB41021AB5C2@tfukwokmsg01.datastream.com>
Message-ID: <009901c3db93$4e6fefa0$0200020a@jamesnew>

My experience with 1000 if's and above is it is a big cpu hog and does not scale well.
This is wat net-flows is used for.

James Edwards
Routing and Security Administrator
jamesh at cybermesa.com
At the Santa Fe Office: Internet at Cyber Mesa
Store hours: 9-6 Monday through Friday
505-988-9200 SIP:1(747)669-1965

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Thu Jan 15 20:08:32 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Thu, 15 Jan 2004 19:08:32 -0000
Subject: [mrtg] Re: error whit leng
Message-ID: <200401151908.i0FJ8wTJ004092@knockout.kirtland.af.mil>

Modify your /etc/sysconfig/i18n so that it says LANG="en_US" instead of
LANG="en_US.UTF-8" and it will work. :) 


-----Original Message-----
From: Ramses Jacinto Castro [mailto:rcastro at dsi.uanl.mx]
Sent: Thursday, January 15, 2004 10:54 AM
To: mrtg at list.ee.ethz.ch"
Subject: [mrtg] error whit leng



  Hi there, I have all ready ask this before so I apologyze for do it
again but we have a problem whit some HD  and some info where lost, any
way I really sorry to bother whit this one mote time.

I normaly use MRTG on a Windows server, but recently I have to migrate
to a Linux server, the install was no prob but in the moment to compile
the .cfg file this error is display

-----------------------------------------------------------------------
ERROR: Mrtg will most likely not work propperly when the environment
       variable LANG is set to UTF-8. Please run mrtg in an environment
       where this is not the case:
 
       env LANG=C ./mrtg ...
-----------------------------------------------------------------------

tks for the help

Best regards


 Atte: Rams?s Jacinto Castro
 Universidad Autonoma de Nuevo Le?n
 Laboratorio de Interoperabilidad
 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From nick at mail.crlibrary.org  Thu Jan 15 20:22:58 2004
From: nick at mail.crlibrary.org (Nick Trenary)
Date: Thu, 15 Jan 2004 13:22:58 -0600
Subject: [mrtg] Trouble with OID on Solaris
Message-ID: <6.0.0.22.0.20040115130925.01c6d138@mail.crlibrary.org>

I'm trying to graph the free memory on a Sun Sunfire 150 running Solaris 
9.  I performed a walk and found this OID: 
.1.3.6.1.4.1.42.2.12.2.2.12.6.4.  I have tried a few techniques to get this 
to work but no luck.  MRTG is running on a Win2k box.  It is operating 
correctly, SNMP is running correctly on Solaris too, I can get network 
traffic stats on MRTG from it.  Each time I run the .cfg file I receive an 
error status message of noSuchName, followed by other text.  What am I missing?

----
Nick Trenary
Computer Information Systems Analyst
<http://www.crlibrary.org/>Cedar Rapids Public Library
(319) 398-5145 x267  

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From pam43 at georgetown.edu  Thu Jan 15 20:46:51 2004
From: pam43 at georgetown.edu (Patricia A. Malinowski)
Date: Thu, 15 Jan 2004 14:46:51 -0500
Subject: [mrtg] Re: Trouble with OID on Solaris
References: <6.0.0.22.0.20040115130925.01c6d138@mail.crlibrary.org>
Message-ID: <0af701c3dba0$52ae49b0$2b04a18d@galeforce98>

verify your OID with the OID translator to determine if, in fact, it's the
OID you want.
http://jaguar.ir.miami.edu/cgi-bin/snmptransc.cgi

----- Original Message ----- 
From: "Nick Trenary" <nick at mail.crlibrary.org>
To: <mrtg at list.ee.ethz.ch>
Sent: Thursday, January 15, 2004 2:22 PM
Subject: [mrtg] Trouble with OID on Solaris


> I'm trying to graph the free memory on a Sun Sunfire 150 running Solaris
> 9.  I performed a walk and found this OID:
> .1.3.6.1.4.1.42.2.12.2.2.12.6.4.  I have tried a few techniques to get
this
> to work but no luck.  MRTG is running on a Win2k box.  It is operating
> correctly, SNMP is running correctly on Solaris too, I can get network
> traffic stats on MRTG from it.  Each time I run the .cfg file I receive an
> error status message of noSuchName, followed by other text.  What am I
missing?
>
> ----
> Nick Trenary
> Computer Information Systems Analyst
> <http://www.crlibrary.org/>Cedar Rapids Public Library
> (319) 398-5145 x267
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From msanford at ascensionhealth.org  Thu Jan 15 20:52:14 2004
From: msanford at ascensionhealth.org (Michael Sanford)
Date: Thu, 15 Jan 2004 13:52:14 -0600
Subject: [mrtg] Re: Too many lock files
Message-ID: <21997C15EC2FB448B11B99B8CAD4AF2865ACCD@evv1exch.evv1.icorp.ahealth.org>
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--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From artemacabro at www.artemacabro.com.ar  Fri Jan 16 06:48:01 2004
From: artemacabro at www.artemacabro.com.ar (artemacabro)
Date: Fri, 16 Jan 2004 02:48:01 -0300
Subject: [mrtg] Re: Snmp + Mrtg --> Problems 
In-Reply-To: <20040115120523.61611D9371@ntardis.ee.ethz.ch>
References: <20040115110922.M27247@www.artemacabro.com.ar> <20040115120523.61611D9371@ntardis.ee.ethz.ch>
Message-ID: <20040116054603.M34133@www.artemacabro.com.ar>

Hi, and Thanks!

I'm running a FreeBSD 4.9 , running apache 1.3.28, net-snmpd, and mrtg-2.10.12

Now I resolve the problem with my snmpd.conf , I made a file and in it I only 
write:
 com2sec local 127.0.0.1 system
 group ROView v1  local
 group ROView v2c local
 view  roview     included .1.3.6.1.2.1
 access ROView    ""      any       noauth    exact      roview none   none

I run The "cfgmaker" and Ok!
I run indexmaker and OK!

But when I started mrtg, it runs oks an generate me the graphics oks but
I receive a Warning

server# /usr/local/mrtg-2/bin/mrtg /etc/mrtg.cfg
Rateup WARNING: /usr/local/mrtg-2/bin/rateup Can't remove localhost_1.old 
updating log file
Rateup WARNING: /usr/local/mrtg-2/bin/rateup Can't remove localhost_2.old 
updating log file

Before this I received another warning:

Rateup WARNING: /usr/local/mrtg-2/bin/rateup could not read the primary log 
file for localhost_1


What could be wrong now?

And Thanks for your help !!!


Artemacabro




On Thu, 15 Jan 2004 21:05:14 +0900, Takumi Yamane wrote
> Hi,
> 
> On Thu, 15 Jan 2004 08:10:13 -0300, "artemacabro" wrote 
> in <20040115110922.M27247 at www.artemacabro.com.ar>:
> > 
> > My problem is that when i run the "cfgmaker" for make the mrtg.cfg
> ...
> > SNMPWALK Problem for 1.3.6.1.2.1.1 on private at 192.168.0.183::::::
> > v4only at ./cfgmaker line 825
> 
> Check your snmpd.conf IF you are running Linux box.
> 
> > And if I do an "snmpget" I got
> 
> Try this one:
>   snmpget your-agent community-string .1.3.6.1.2.1.1.1.0
> 
> There is something wrong with your snmpd.conf(or agent's settings) 
> if it doesn't work.
> 
> Would you care to provide these info?
> + What is your agent's OS/version?
> + What is your host's OS/version, which MRTG is running on?
> + What is your MRTG version?
> 
> --
> Takumi Yamane <yamtak at b-session.com>
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jim.mozley at exponential-e.com  Fri Jan 16 15:53:09 2004
From: jim.mozley at exponential-e.com (Jim Mozley)
Date: Fri, 16 Jan 2004 14:53:09 +0000
Subject: [mrtg] Inconsistant graphs that seem to disagree with rrd data
Message-ID: <4007FAD5.6000305@exponential-e.com>

I have a graph generated by 14all.cgi from rrd that shows inconsistent 
values when compared to the figures in the legend.

I have a switch with 3 virtual interfaces that are running at around 5, 
30 and 80 Mb/s fairly constantly as the traffic is generated by a 
network testing device.

The traffic goes through a gig-e interface that shows the current 
traffic (in the figures below the legend) as around 115 Mb/s, which is 
what I would expect. The Maximal and Average are also around 115 Mb/s, 
which again is what I'd expect because the traffic generation has been 
going for over a day.

However, my problem is that the in/out traffic shown on the graph is 
around 150 Mb/s.

The same can be seen on the network device at the other end of the link.

Checking other network devices (not involved in the testing) shows that 
they seem to be reporting traffic correctly in that the graph seems to 
be consistent with the figures.

I am using MRTG 2.9.27, RRD 1.0.41 and 14all.cgi 2.25 on RiverStone 
switches.

Can anyone explain this behaviour which I haven't seen before in our 
environment?

Jim

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From mammali at horizon-satellite.com  Wed Jan 14 18:11:19 2004
From: mammali at horizon-satellite.com (Muhammed Ali)
Date: Wed, 14 Jan 2004 20:11:19 +0300
Subject: [mrtg] Re: Inconsistant graphs that seem to disagree with rrd data
In-Reply-To: <4007FAD5.6000305@exponential-e.com>
Message-ID: <000201c3dac1$74280930$098acd52@mammalilaptop>

Use mrtg-rrd.cgi instead of 14all.cgi, it is much better that 14all.cgi

Regards
Muhammed Ali

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Jim Mozley
Sent: Friday, January 16, 2004 5:53 PM
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Inconsistant graphs that seem to disagree with rrd data

I have a graph generated by 14all.cgi from rrd that shows inconsistent 
values when compared to the figures in the legend.

I have a switch with 3 virtual interfaces that are running at around 5, 
30 and 80 Mb/s fairly constantly as the traffic is generated by a 
network testing device.

The traffic goes through a gig-e interface that shows the current 
traffic (in the figures below the legend) as around 115 Mb/s, which is 
what I would expect. The Maximal and Average are also around 115 Mb/s, 
which again is what I'd expect because the traffic generation has been 
going for over a day.

However, my problem is that the in/out traffic shown on the graph is 
around 150 Mb/s.

The same can be seen on the network device at the other end of the link.

Checking other network devices (not involved in the testing) shows that 
they seem to be reporting traffic correctly in that the graph seems to 
be consistent with the figures.

I am using MRTG 2.9.27, RRD 1.0.41 and 14all.cgi 2.25 on RiverStone 
switches.

Can anyone explain this behaviour which I haven't seen before in our 
environment?

Jim

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jim.mozley at exponential-e.com  Fri Jan 16 19:10:11 2004
From: jim.mozley at exponential-e.com (Jim Mozley)
Date: Fri, 16 Jan 2004 18:10:11 +0000
Subject: [mrtg] Re: Inconsistant graphs that seem to disagree with rrd data
In-Reply-To: <000201c3dac1$74280930$098acd52@mammalilaptop>
References: <000201c3dac1$74280930$098acd52@mammalilaptop>
Message-ID: <40082903.1050201@exponential-e.com>

Muhammed Ali wrote:

> Use mrtg-rrd.cgi instead of 14all.cgi, it is much better that 14all.cgi

I can give this a try, but won't they both use the same RRDs perl module 
and RRDs::graph commands in the end - hence the graph would look the 
same. Mmmmmmmmmm perhaps my problem is RRD related?

Jim

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Jason.Harper at asu.edu  Fri Jan 16 22:16:24 2004
From: Jason.Harper at asu.edu (Jason Harper)
Date: Fri, 16 Jan 2004 14:16:24 -0700
Subject: [mrtg] Re: Data problem with absolute option
Message-ID: <41C5C216FAB08E438587145FCB1DF300034806AD@ex4.asurite.ad.asu.edu>


Ok, I think I figured out my problem:

-- exerpt from mrtg code
    # select whether the datasource gives relative or absolte return
values.
    my $up_abs="u";
    $up_abs='a' if defined $$rcfg{'options'}{'absolute'}{$router};
    $up_abs='g' if defined $$rcfg{'options'}{'gauge'}{$router};
    $up_abs='h' if defined $$rcfg{'options'}{'perhour'}{$router};
    $up_abs='m' if defined $$rcfg{'options'}{'perminute'}{$router};
---

The absolute option is mutually exclusive with the perminute option the
way the code is written.  How can I take advantage of absolute while
also getting the benefits of perminute?  Why does perminute not work
with absolute or gauge?

Jason

 

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Jason Harper
Sent: Wednesday, January 14, 2004 5:44 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Data problem with absolute option

First off, I use mrtg for bandwidth usage monitoring and it works great
for that (thanks to everyone who has written or contributed to mrtg!)

I'm trying to graph usage activity for a web application.  The
application inserts a row in an SQL table roughly for each transaction.
So, my approach was this:

Create a perl script which counts the number of new records in the table
since the script was last run, prints that value on the first two lines
of output, and then prints two more lines of dummy text (for uptime and
system name).  The output of the perl script looks something like this:

----
257
257
uptime
atrecords
----

Pretty simple.  It is basically a counter that resets to zero whenever
it is run.  This sounds exactly like the "absolute" option in mrtg.  So
here is the relevant section of my mrtg.cfg:

Title[intsite-atrecords]: ASU Interactive AUDIT_TRAIL Activity
MaxBytes[intsite-atrecords]: 1000000
Options[intsite-atrecords]:
perminute,absolute,growright,nopercent,noo,pngdate,noinfo
Target[intsite-atrecords]: `/home/mrtg/getATrecords.pl`
PageTop[intsite-atrecords]: <H1>ASU Interactive AUDIT_TRAIL Activity
(records per minute)
YLegend[intsite-atrecords]: records/minute
ShortLegend[intsite-atrecords]: records/min
Legend1[intsite-atrecords]: Avg Records/minute
Legend2[intsite-atrecords]: Avg Records/minute
Legend3[intsite-atrecords]: Peak/max Records/minute
Legend4[intsite-atrecords]: Peak/max Records/minute
LegendI[intsite-atrecords]: &nbsp;Records/min:
LegendO[intsite-atrecords]: &nbsp;Records/min:
WithPeak[intsite-atrecords]: ymw

Since the values will be smallish, I wanted per-minute counts, not
per-second.  Mrtg is running every 5 minutes.

All was well until I was suspicious of how low the graphed values
seemed.  So, I modified my perl script to log to a file the values that
it returns to mrtg.  Sure enough, the values are a lot higher than what
mrtg appears to be graphing and displaying in the html.  Here's an
example of the data points since I last wiped out my intsite-atrecords.*
files to start it all over.  The first record is when I ran mrtg
manually the first time:

Jan 14 2004  4:03:48:833PM-231
Jan 14 2004  4:05:01:046PM-91
Jan 14 2004  4:10:01:333PM-300
Jan 14 2004  4:15:00:513PM-382
Jan 14 2004  4:20:00:643PM-370
Jan 14 2004  4:25:00:790PM-313
Jan 14 2004  4:30:00:983PM-291
Jan 14 2004  4:35:01:220PM-402
Jan 14 2004  4:40:01:390PM-265
Jan 14 2004  4:45:00:676PM-280
Jan 14 2004  4:50:00:836PM-242
Jan 14 2004  4:55:00:993PM-275
Jan 14 2004  5:00:01:143PM-253
Jan 14 2004  5:05:01:393PM-267
Jan 14 2004  5:10:00:563PM-299
Jan 14 2004  5:15:01:676PM-255
Jan 14 2004  5:20:00:820PM-257
Jan 14 2004  5:25:01:200PM-321
Jan 14 2004  5:29:59:833PM-261

That is the date/time the script was run (according to the SQL server..
It's the date I use in the select statement so that I only count new
records) followed by a dash and the value that it returned on line 1 and
line 2 to mrtg.  Some quick division shows that the lowest value at 4:50
was about 48.4 records per minute and the highest at 4:35 was 80.4
records per minute.  But, that's not at all what my mrtg graphs and html
pages show.  Take a look at:

http://rgweb.vpsa.asu.edu/intsite/mrtg/email/
Or more specifically
http://rgweb.vpsa.asu.edu/intsite/mrtg/email/intsite-atrecords.html

The graph shows a peak of 41 at the beginning but looks nothing at all
like the data above.  

Ideas?  Did I miss something simple?

I don't know how to interpret mrtg's .log file, but here are the first
several lines:
1074126601 261 261
1074126601 13 13 13 13
1074126301 13 13 13 13
1074126300 12 12 13 13
1074126000 0 0 6 6
1074125700 6 6 6 6
1074125400 5 5 6 6
1074125100 2 2 3 3
1074124800 1 1 1 1
1074124500 1 1 3 3
1074124200 3 3 3 3
1074123900 3 3 22 22
1074123600 22 22 22 22
1074123300 21 21 22 22
1074123000 16 16 16 16
1074122700 16 16 16 16
1074122400 16 16 16 16
1074122100 16 16 42 42
1074121800 41 41 42 42
1074121500 0 0 0 0
1074121200 0 0 0 0
(the rest are zeros)

The first line looks like the most recent reading that it was given....
I don't know what significance that has...


Thanks for any advise
Jason

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From dan.mcdonald at austinenergy.com  Fri Jan 16 23:52:20 2004
From: dan.mcdonald at austinenergy.com (Daniel J McDonald)
Date: Fri, 16 Jan 2004 16:52:20 -0600
Subject: [mrtg] Re: Data problem with absolute option
In-Reply-To: <41C5C216FAB08E438587145FCB1DF300034806AD@ex4.asurite.ad.asu.edu>
References: 
	 <41C5C216FAB08E438587145FCB1DF300034806AD@ex4.asurite.ad.asu.edu>
Message-ID: <1074293540.2301.239.camel@mcdonalddj-lnx.electric.ci.austin.tx.us>

On Fri, 2004-01-16 at 15:16, Jason Harper wrote:
> Ok, I think I figured out my problem:

> The absolute option is mutually exclusive with the perminute option the
> way the code is written. 

That seems a bit odd.

>  How can I take advantage of absolute while
> also getting the benefits of perminute?  
Sounds like a job for rrdtool

> Why does perminute not work
> with absolute or gauge?
With gauge it is completely understandable.  if you are monitoring
something that exists at a point of time, such as temperature, you would
be hard pressed to express temperature as degrees per minute

Absolute is so rarely used, I can see where no one would have thought
through using it with perminute.
-- 
Daniel J McDonald, CCIE 2495, CNX
Austin Energy


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Sat Jan 17 00:11:12 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Sat, 17 Jan 2004 00:11:12 +0100
Subject: [mrtg] Re: Data problem with absolute option
In-Reply-To: <1074293540.2301.239.camel@mcdonalddj-lnx.electric.ci.austin.tx.us>; from dan.mcdonald@austinenergy.com on Fri, Jan 16, 2004 at 04:52:20PM -0600
References: <41C5C216FAB08E438587145FCB1DF300034806AD@ex4.asurite.ad.asu.edu> <1074293540.2301.239.camel@mcdonalddj-lnx.electric.ci.austin.tx.us>
Message-ID: <20040117001112.A31545@slot.hollandcasino.net>

On Fri, Jan 16, 2004 at 04:52:20PM -0600, Daniel J McDonald wrote:

> With gauge it is completely understandable.  if you are monitoring
> something that exists at a point of time, such as temperature, you would
> be hard pressed to express temperature as degrees per minute

Erm,

What if my device returns, say, RPM ?
_That's_ what gauge is for.  All other use may work but in the end
a rate is a rate is a rate...

cheers,
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Sat Jan 17 00:43:27 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Fri, 16 Jan 2004 23:43:27 -0000
Subject: [mrtg] Monitoring Room Temperature with Temptrax
Message-ID: <200401162343.i0GNhpTJ011855@knockout.kirtland.af.mil>

Does anyone out there monitor theirs server rooms with a Temptrax Ethernet
monitoring device?  If so, what script did you happen to use?  I'm using a
script that I found for MRTG and the Temptraxe, but it turns only one value
which causes my MRTG to throw the " Expected a Number for 'out' but nothing'
" error.  

Dave has been helping me with this problem and shown me the problem I'm
having.  Now I just need to figure out how I can get it to return the 4
values It's asking for to run an external script.  Thanks!

Mike

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From mammali at horizon-satellite.com  Thu Jan  8 09:18:52 2004
From: mammali at horizon-satellite.com (Muhammed Ali)
Date: Thu, 8 Jan 2004 11:18:52 +0300
Subject: [mrtg] MRTG URL
Message-ID: <000d01c3d5c0$100b9ee0$108acd52@mammalilaptop>

Dear Wimal,
 

Please see the bellow URL for MRTG for your internet usage

 

Downlink :- http://195.73.9.10/statistics/Horizon/Horizon/HCS_Belleli/

Uplink:- http://195.73.9.10/statistics/Horizon/Horizon/HCS_Belleli_scpc/

 

Username : horizon   

Password:  hcs!jsf2b

 

 

Regards

Muhammed Ali



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Sat Jan 17 14:10:56 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Sat, 17 Jan 2004 14:10:56 +0100
Subject: [mrtg] Re: Monitoring Room Temperature with Temptrax
In-Reply-To: <200401162343.i0GNhpTJ011855@knockout.kirtland.af.mil>; from michael.johnston@kirtland.af.mil on Fri, Jan 16, 2004 at 11:43:27PM -0000
References: <200401162343.i0GNhpTJ011855@knockout.kirtland.af.mil>
Message-ID: <20040117141056.A2543@slot.hollandcasino.net>

On Fri, Jan 16, 2004 at 11:43:27PM -0000, Johnston Michael J Contr AFRL/DES wrote:
> Does anyone out there monitor theirs server rooms with a Temptrax Ethernet
> monitoring device?  If so, what script did you happen to use?  I'm using a
> script that I found for MRTG and the Temptraxe, but it turns only one value
> which causes my MRTG to throw the " Expected a Number for 'out' but nothing'
> " error.  

It shouldn't be hard to either
- adapt the script so that it writes more lines
or
- write a wrapper around the script that does this in stead

The wrapper just calls the original script and duplicates the
value, thus providing a number for 'out'.  MRTG calls the wrapper.

I'm not sure about the following three statements:

- Missing lines are not a problem for earlier MRTG versions
- Missing 3rd and 4th line are not a problem for your current
  version of MRTG, but a missing 2nd line is
- Later versions of MRTG _may_ force you to return all 4 lines

So, if you're going to change the script or write a wrapper for it,
it is probably best to do it the right way and return all four lines
despite the fact that _currently_ two is enough.

HTH
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From pjam at xs4all.nl  Sun Jan 18 23:13:29 2004
From: pjam at xs4all.nl (Michel)
Date: Sun, 18 Jan 2004 23:13:29 +0100
Subject: [mrtg] resolve  problem?
Message-ID: <000f01c3de10$4d72ad70$050a0a0a@vudq>

Hello,
 
When I start cfgmaker with the following command:
 
./cfgmaker --global "WorkDir:/usr/local/apache/htdocs/mrtg" \ --global
"Options[_]:growright, bits" \--global "IconDir:icons" \ifref=ip
\snmp-options=:::::2c\ metro827 at metro827 > mrtg.cfg
 
I receive this error:
 
Error:
  can't resolve " --global" to IP address
 at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 424
SNMPWALK Problem for public@ --global::::::v4only
 at ./cfgmaker line 825
WARNING: Skipping public@ --global: as no info could be retrieved
 
 
But when I do an snmpwalk everything seems to work fine:
 
snmpwalk  -v 2c -c  metro827 metro827 system SNMPv2-MIB::sysDescr.0 =
STRING: Cisco Internetwork Operating System Software IOS (tm) C827
Software (C827-Y6-M), Version 12.1(1)XB, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1) Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled
Mon 10-Apr-00 13:21 by phanguye SNMPv2-MIB::sysObjectID.0 = OID:
SNMPv2-SMI::enterprises.9.1.284 SNMPv2-MIB::sysUpTime.0 = Timeticks:
(44084667) 5 days, 2:27:26.67 SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysName.0 = STRING: wg_r_b SNMPv2-MIB::sysLocation.0 =
STRING: SNMPv2-MIB::sysServices.0 = INTEGER: 6
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (0) 0:00:00.00
 
In the hosts file there is a mapping between the router and the IP
addres so I can ping the router by its name.
 
The strange thing is that I installed MRTG three times before and did
not have any problems. I am running RED HAT 9.0.
 
Any ideas what I am doing wrong?
 
Thanks in advance.
 
Michel

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Sun Jan 18 23:21:46 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Sun, 18 Jan 2004 23:21:46 +0100
Subject: [mrtg] Re: resolve  problem?
In-Reply-To: <000f01c3de10$4d72ad70$050a0a0a@vudq>; from pjam@xs4all.nl on Sun, Jan 18, 2004 at 11:13:29PM +0100
References: <000f01c3de10$4d72ad70$050a0a0a@vudq>
Message-ID: <20040118232146.A14697@slot.hollandcasino.net>

On Sun, Jan 18, 2004 at 11:13:29PM +0100, Michel wrote:
> Hello,
>  
> When I start cfgmaker with the following command:
>  
> ./cfgmaker --global "WorkDir:/usr/local/apache/htdocs/mrtg" \ --global
> "Options[_]:growright, bits" \--global "IconDir:icons" \ifref=ip
> \snmp-options=:::::2c\ metro827 at metro827 > mrtg.cfg

You have backslashes that do not seem to make much sense.
Your mail client probably f**ked up, or you used cut'n'paste
in a strange way.  This, or you really have backslashes in
strange and unnecessary places.

I guess "\--global" looks stranger than the rest.  Perhaps there's
your problem.

Just write anything on one line so there's no need to escape newlines
with backslashes.  That means you can't do it wrong.

Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From yamtak at b-session.com  Sun Jan 18 23:26:22 2004
From: yamtak at b-session.com (Takumi Yamane)
Date: Mon, 19 Jan 2004 07:26:22 +0900
Subject: [mrtg] Re: resolve  problem?
In-Reply-To: <000f01c3de10$4d72ad70$050a0a0a@vudq>
References: <000f01c3de10$4d72ad70$050a0a0a@vudq>
Message-ID: <20040118222630.2D4E4D944F@ntardis.ee.ethz.ch>

Hi,

On Sun, 18 Jan 2004 23:13:29 +0100, "Michel" wrote 
in <000f01c3de10$4d72ad70$050a0a0a at vudq>:
>  
> When I start cfgmaker with the following command:
>  
> ./cfgmaker --global "WorkDir:/usr/local/apache/htdocs/mrtg" \ --
> global
..
>   can't resolve " --global" to IP address

Do you know the meaning of backslash(\) on command line?
Probably you know but just in case ...

--
Takumi Yamane <yamtak at b-session.com>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From pjam at xs4all.nl  Mon Jan 19 00:40:58 2004
From: pjam at xs4all.nl (Michel)
Date: Mon, 19 Jan 2004 00:40:58 +0100
Subject: [mrtg] Re: resolve  problem?
In-Reply-To: <20040118232146.A14697@slot.hollandcasino.net>
Message-ID: <000901c3de1c$86601440$050a0a0a@vudq>

Hi Alex,

You were partly right. I removed the backslashes but still receive an
error: can't resolve "ipref=ip" to IP address

I will look at it tomorrow. I guess it has something to do with the
SNMP-version option.

Thanks for your quick response.

Regards,

MIchel

./cfgmaker --global "WorkDir:/usr/local/apache/htdocs/mrtg" --global
"IconDir:icons" --global "Options[_]:growright,bits"
--snmp-options=:::::2 ipref=ip  metrobay at metro827 >mrtg.cfg
--base: Get Device Info on public at ipref=ip:::::2
Error:
  can't resolve "ipref=ip" to IP address
 at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 424 SNMPWALK
Problem for public at ipref=ip:::::2:v4only  at ./cfgmaker line 825
WARNING: Skipping public at ipref=ip:::::2 as no info could be retrieved
 
--base: Get Device Info on metrobay at metro827:::::2
--base: Vendor Id: cisco
--base: Populating confcache
--snpo: confcache metrobay at metro827:::::2 Name AT0 --> 1
--snpo: confcache metrobay at metro827:::::2 Name Et0 --> 2
--snpo: confcache metrobay at metro827:::::2 Name Nu0 --> 3
--snpo: confcache metrobay at metro827:::::2 Name AT0-interleave --> 4
--snpo: confcache metrobay at metro827:::::2 Name AT0-fast --> 5
--snpo: confcache metrobay at metro827:::::2 Name AT0-adsl --> 6
--snpo: confcache metrobay at metro827:::::2 Name AT0 --> 7 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Name AT0 --> 8 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Name AT0 --> 9 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Name AT0 --> 10 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Name Di0 --> 11
--snpo: confcache metrobay at metro827:::::2 Name Vi1 --> 12
--snpo: confcache metrobay at metro827:::::2 Descr ATM0 --> 1
--snpo: confcache metrobay at metro827:::::2 Descr Ethernet0 --> 2
--snpo: confcache metrobay at metro827:::::2 Descr Null0 --> 3
--snpo: confcache metrobay at metro827:::::2 Descr ATM0-interleave --> 4
--snpo: confcache metrobay at metro827:::::2 Descr ATM0-fast --> 5
--snpo: confcache metrobay at metro827:::::2 Descr ATM0-adsl --> 6
--snpo: confcache metrobay at metro827:::::2 Descr ATM0-atm layer --> 7
--snpo: confcache metrobay at metro827:::::2 Descr ATM0.0-atm subif --> 8
--snpo: confcache metrobay at metro827:::::2 Descr ATM0-aal5 layer --> 9
--snpo: confcache metrobay at metro827:::::2 Descr ATM0.0-aal5 layer --> 10
--snpo: confcache metrobay at metro827:::::2 Descr Dialer0 --> 11
--snpo: confcache metrobay at metro827:::::2 Descr Virtual-Access1 --> 12
--snpo: confcache metrobay at metro827:::::2 Type 1 --> 1
--snpo: confcache metrobay at metro827:::::2 Type 6 --> 2
--snpo: confcache metrobay at metro827:::::2 Type 1 --> 3 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Type 124 --> 4
--snpo: confcache metrobay at metro827:::::2 Type 125 --> 5
--snpo: confcache metrobay at metro827:::::2 Type 94 --> 6
--snpo: confcache metrobay at metro827:::::2 Type 37 --> 7
--snpo: confcache metrobay at metro827:::::2 Type 134 --> 8
--snpo: confcache metrobay at metro827:::::2 Type 49 --> 9
--snpo: confcache metrobay at metro827:::::2 Type 49 --> 10 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Type 23 --> 11
--snpo: confcache metrobay at metro827:::::2 Type 23 --> 12 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Ip 10.10.10.1 --> 2
--snpo: confcache metrobay at metro827:::::2 Ip [my ip address here]--> 11
--snpo: confcache metrobay at metro827:::::2 Eth  --> 1
--snpo: confcache metrobay at metro827:::::2 Eth 00-01-96-a4-87-85 --> 2
--snpo: confcache metrobay at metro827:::::2 Eth  --> 3 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Eth  --> 4 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Eth  --> 5 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Eth  --> 6 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Eth  --> 7 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Eth  --> 8 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Eth  --> 9 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Eth  --> 10 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Eth  --> 11 (duplicate)
--snpo: confcache metrobay at metro827:::::2 Eth  --> 12 (duplicate)
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
--base: Walking ifAlias
--base: Walking vmVlan
--base: Walking ifSpeed
--base: Walking ifHighSpeed
--base: snmpget metrobay at metro827:::::2:v4only for ifHighSpeed.1 -> 1
Mb/s
--base: snmpget metrobay at metro827:::::2:v4only for ifHCInOctets.1 ->
184230366
--base: snmpget metrobay at metro827:::::2:v4only for ifHighSpeed.2 -> 10
Mb/s
--base: snmpget metrobay at metro827:::::2:v4only for ifHCInOctets.2 ->
184230366
--base: snmpget metrobay at metro827:::::2:v4only for ifHighSpeed.3 ->
10000 Mb/s
--base: snmpget metrobay at metro827:::::2:v4only for ifHCInOctets.3 ->
184230366
--base: snmpget metrobay at metro827:::::2:v4only for ifHighSpeed.4 -> 0
Mb/s
--base: snmpget metrobay at metro827:::::2:v4only for ifHCInOctets.4 ->
--base: check for HighspeedCounters faild ... Droping back to V1
--base: snmpget metrobay at metro827:::::2:v4only for ifHighSpeed.5 -> 0
Mb/s
--base: snmpget metrobay at metro827:::::2:v4only for ifHCInOctets.5 ->
--base: check for HighspeedCounters faild ... Droping back to V1
--base: snmpget metrobay at metro827:::::2:v4only for ifHighSpeed.6 -> 0
Mb/s
--base: snmpget metrobay at metro827:::::2:v4only for ifHCInOctets.6 ->
--base: check for HighspeedCounters faild ... Droping back to V1
--base: snmpget metrobay at metro827:::::2:v4only for ifHighSpeed.7 -> 0
Mb/s
--base: snmpget metrobay at metro827:::::2:v4only for ifHCInOctets.7 ->
--base: check for HighspeedCounters faild ... Droping back to V1
--base: snmpget metrobay at metro827:::::2:v4only for ifHighSpeed.8 -> 1
Mb/s
--base: snmpget metrobay at metro827:::::2:v4only for ifHCInOctets.8 ->
--base: check for HighspeedCounters faild ... Droping back to V1
--base: snmpget metrobay at metro827:::::2:v4only for ifHighSpeed.9 -> 0
Mb/s
--base: snmpget metrobay at metro827:::::2:v4only for ifHCInOctets.9 ->
184230539
--base: check for HighspeedCounters faild ... Droping back to V1
--base: snmpget metrobay at metro827:::::2:v4only for ifHighSpeed.10 -> 1
Mb/s
--base: snmpget metrobay at metro827:::::2:v4only for ifHCInOctets.10 ->
184230539
--base: snmpget metrobay at metro827:::::2:v4only for ifHighSpeed.11 -> 0
Mb/s
--base: snmpget metrobay at metro827:::::2:v4only for ifHCInOctets.11 ->
184230539
--base: check for HighspeedCounters faild ... Droping back to V1
--base: snmpget metrobay at metro827:::::2:v4only for ifHighSpeed.12 -> 0
Mb/s
--base: snmpget metrobay at metro827:::::2:v4only for ifHCInOctets.12 ->
184230539
--base: check for HighspeedCounters faild ... Droping back to V1


-----Oorspronkelijk bericht-----
Van: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
Namens Alex van den Bogaerdt
Verzonden: zondag 18 januari 2004 23:22
Aan: mrtg at list.ee.ethz.ch
Onderwerp: [mrtg] Re: resolve problem?

On Sun, Jan 18, 2004 at 11:13:29PM +0100, Michel wrote:
> Hello,
>  
> When I start cfgmaker with the following command:
>  
> ./cfgmaker --global "WorkDir:/usr/local/apache/htdocs/mrtg" \ --global
> "Options[_]:growright, bits" \--global "IconDir:icons" \ifref=ip
> \snmp-options=:::::2c\ metro827 at metro827 > mrtg.cfg

You have backslashes that do not seem to make much sense.
Your mail client probably f**ked up, or you used cut'n'paste
in a strange way.  This, or you really have backslashes in
strange and unnecessary places.

I guess "\--global" looks stranger than the rest.  Perhaps there's
your problem.

Just write anything on one line so there's no need to escape newlines
with backslashes.  That means you can't do it wrong.

Alex
-- 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From grice at binc.net  Mon Jan 19 00:58:12 2004
From: grice at binc.net (Michael Grice)
Date: Sun, 18 Jan 2004 17:58:12 -0600
Subject: [mrtg] Re: resolve  problem?
In-Reply-To: <000901c3de1c$86601440$050a0a0a@vudq>
References: <20040118232146.A14697@slot.hollandcasino.net> <000901c3de1c$86601440$050a0a0a@vudq>
Message-ID: <20040118235812.GD30627@ctg-mail.binc.net>

* Michel <pjam at xs4all.nl> [040118 17:45] wrote:
> Hi Alex,
> 
> You were partly right. I removed the backslashes but still receive an
> error: can't resolve "ipref=ip" to IP address
> 
> I will look at it tomorrow. I guess it has something to do with the
> SNMP-version option.
> 
> Thanks for your quick response.
> 
> Regards,
> 
> MIchel
> 
> ./cfgmaker --global "WorkDir:/usr/local/apache/htdocs/mrtg" --global
> "IconDir:icons" --global "Options[_]:growright,bits"
> --snmp-options=:::::2 ipref=ip  metrobay at metro827 >mrtg.cfg
> --base: Get Device Info on public at ipref=ip:::::2
> Error:
>   can't resolve "ipref=ip" to IP address
>  at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 424 SNMPWALK
> Problem for public at ipref=ip:::::2:v4only  at ./cfgmaker line 825
> WARNING: Skipping public at ipref=ip:::::2 as no info could be retrieved

Michel,

It looks to me as if that should be --ifref=ip. I would bet
that, since there's no -- before ifref=ip, cfgmaker is interpreting
ifref=ip as the host name instead of metro827.

So change the end to  "--snmp-options=:::::2 --ipref=ip
metrobay at metro827" and I bet it works.
--Michael

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From arun.kumar at estelcom.com  Mon Jan 19 01:51:53 2004
From: arun.kumar at estelcom.com (Arun Kumar)
Date: Mon, 19 Jan 2004 06:21:53 +0530
Subject: [mrtg] Spike after an outage.
Message-ID: <001901c3de26$76abcd00$4900000a@estelcom.com>

Hi friends!
The MRTG for  my router traffic shows high spikes, but in fact there is no such traffic flow really.

This happens mostly when my MRTG server loses connectivity to the router. And when the connectivity is restored, it shows a high spike. 

I had gone through the mailing list, but there was no solution present. Different people explain in a different way. People say it is a normal operation, as the software tries to calculate the traffic during the outage period and hence a spike is displayed. Some say about 32 bit / 64 bit counters overflow. If anyone can explain me clearly, it will be really helpful for me. Or else is this a problem with the  MRTG version? I am using mrtg-2.9.17-1. 

I am using MRTG to monitor the router's CPU. If there is a spike due to the software's miscalculation, then it is a problem for me. ( say the graph states 95% utilization, and I get confused whether the router has really reached, or the software has interpreted values during the outage period ).

Please share your views in this regard..

Thanks,
Arun Kumar


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From ziltener at netcloud.ch  Mon Jan 19 05:34:09 2004
From: ziltener at netcloud.ch (ziltener at netcloud.ch)
Date: Mon, 19 Jan 2004 13:34:09 +0900
Subject: [mrtg] Hi
Message-ID: <lonocqfjhqfywcirsjj@netcloud.ch>

 Test =)
qnllydwffbdyogts
--
Test, yep.

-- Attached file removed by Ecartis and put at URL below --
-- Type: application/x-msdownload
-- Size: 15k (15872 bytes)
-- URL : http://www.ee.ethz.ch/~slist/p/hnwbxd.exe


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From oetiker at ee.ethz.ch  Mon Jan 19 08:33:42 2004
From: oetiker at ee.ethz.ch (Tobias Oetiker)
Date: Mon, 19 Jan 2004 08:33:42 +0100 (MET)
Subject: [mrtg] [mrtg-announce] mrtg-2.10.13 with fix for fork issue
Message-ID: <Pine.GSO.4.58.0401190831420.24318@ybtva-01.rr.rgum.pu>

Folks

I have released mrtg-2.10.13 ... it fixes the data loss problems
when using the Forks option.

as usual you can get the latest version from

http://people.ee.ethz.ch/~oetiker/webtools/mrtg/pub


Changes 2.10.13
---------------
From: Pedro Marcolino <pedro at jazznet.pt>
* fixed undef data problem with forks
* add --icondir option to indexmaker

From: Tobi
* faild rrdtune should not kill mrtg complaining is enough.
* fixed manpages first lines to include mrtg as well



-- 
 ______    __   _
/_  __/_  / /  (_) Oetiker @ ISG.EE, ETZ J97, ETH, CH-8092 Zurich
 / // _ \/ _ \/ /  System Manager, Time Lord, Coder, Designer, Coach
/_/ \.__/_.__/_/   http://people.ee.ethz.ch/~oetiker   +41(0)1-632-5286

--
Unsubscribe mailto:mrtg-announce-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-announce-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg-announce
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From roddy at netspace.net.au  Mon Jan 19 09:19:19 2004
From: roddy at netspace.net.au (Roddy Strachan)
Date: Mon, 19 Jan 2004 19:19:19 +1100
Subject: [mrtg] Monitoring ATM Pvps ?
Message-ID: <002701c3de64$efd0f2d0$0864a8c0@fractus>

 Hi,
 
 Just wondering if anyone has managed to monitor a PVP of an ATM circuit ?
 
 Graphing seperate PVC's are easy enough, but I wish to be able to graph an
 actual PVP hanging off an ATM circuit.
 
 Any ideas?
 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From avinash_phogat at hotmail.com  Mon Jan 19 09:28:52 2004
From: avinash_phogat at hotmail.com (avinash phogat)
Date: Mon, 19 Jan 2004 13:58:52 +0530
Subject: [mrtg] threshold problem
Message-ID: <BAY2-F672CUn4rineOl0002a29e@hotmail.com>

hello all

can u pls send me examples of an external program or script set up to send 
an e-mail. I am using
linux platform Redhat 7.2

I want to use MRTG for sending mail wheneever threshold condition is met, 
for example mail should go to defined mail id when ever CPU utilization of 
router is exceeding 60% (I will set threshold as 60%)


Waiting for response.

Thanks in Advance.

Regards,
Avinash Phogat

_________________________________________________________________
Gujarat Kite Fest at http://go.msnserver.com/IN/40247.asp 
www.gujaratkitefest.com

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From a15768 at motorola.com  Mon Jan 19 10:00:51 2004
From: a15768 at motorola.com (Chen Haitao-a15768)
Date: Mon, 19 Jan 2004 17:00:51 +0800
Subject: [mrtg] Re: Mrtg can not work with OID I identified
Message-ID: <89DEFCC5DB33D411A27F00508BCF8A82135CE403@ZCH07EXM05.corp.mot.com>


 

Hello Friends
 
I want to use MRTG to check how long one switch port did not be used, so I used the OID "'ifLastChange' => '1.3.6.1.2.1.2.2.1.9'" to identify the Target, the config file is belowed:
 
### Interface 314 >> Descr: '' | Name: '7/3' | Ip: '' | Eth: '00-0a-f4-05-eb-72' ###
 
Target[ABC]: 1.3.6.1.2.1.2.2.1.9.314 & 1.3.6.1.2.1.2.2.1.9.314:public at 10.193.5.250:
MaxBytes[ABC]: 12500000000000000
 
Title[ABC]: ifLastChange for 314 
PageTop[ABC]: <H1>Last Change for GE 7/3 -- </H1>
 
 <TABLE>
   <TR><TD>System:</TD>     <TD> MNAC</TD></TR>
   <TR><TD>Maintainer:</TD> <TD> </TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>7/3</TD></TR>
   <TR><TD>Port Name:</TD>  <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>125.0 MBytes/s</TD></TR>
 </TABLE>
Options[ABC]: gauge

 
 
but MRTG can not work, the error message is :
 
D:\mrtg-2.9.29\bin>perl mrtg mrtg1.cfg
Daemonizing MRTG ...
Do Not close this window. Or MRTG will die
ERROR: Target[abc][_IN_] '1.3.6.1.2.1.2.2.1.9.314 & 1.3.6.1.2.1.2.2.1.9. $$target[4]{$mode} ' evalua
ted to '???????????????????????????       2' instead of a number
ERROR: Target[abc][_OUT_] '1.3.6.1.2.1.2.2.1.9.314 & 1.3.6.1.2.1.2.2.1.9. $$target[4]{$mode} ' evalu
ated to '???????????????????????????      2' instead of a number
WARNING: Skipping Update of abc, inlast is not defined
WARNING: Skipping Update of abc, outlast is not defined
Terminating on signal SIGINT(2)
 
D:\mrtg-2.9.29\bin>
 
Can anyone help me?
 
Best Regards,
 
Haitao.
 
 
 
 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From a15768 at motorola.com  Mon Jan 19 10:34:46 2004
From: a15768 at motorola.com (Chen Haitao-a15768)
Date: Mon, 19 Jan 2004 17:34:46 +0800
Subject: [mrtg] Re: Mrtg can not work with OID I identified
Message-ID: <89DEFCC5DB33D411A27F00508BCF8A82135CE495@ZCH07EXM05.corp.mot.com>

Hello,
 
After some change:
 
### Interface 314 >> Descr: '' | Name: '7/3' | Ip: '' | Eth: '00-0a-f4-05-eb-72' ###
 
Target[ABC]: 1.3.6.1.2.1.2.2.1.9.314&1.3.6.1.2.1.2.2.1.9.314:public at 10.193.5.250:
Options[ABC]: gauge
MaxBytes[ABC]: 100000000
Title[ABC]: ifLastChange for 314 
PageTop[ABC]: <H1>Last Change for GE 7/3 -- </H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD> MNAC</TD></TR>
   <TR><TD>Maintainer:</TD> <TD> </TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>7/3</TD></TR>
   <TR><TD>Port Name:</TD>  <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>125.0 MBytes/s</TD></TR>
 </TABLE>
 
I got the correct date, but still can not make graph, the error is :
 
D:\mrtg-2.9.29\bin>perl mrtg mrtg1.cfg
WARNING: Expected a number but got '21 days, 9:28:26'
WARNING: Expected a number but got '21 days, 9:28:26'
ERROR: Target[abc][_IN_] ' $$target[4]{$mode} ' did not eval into defined data
ERROR: Target[abc][_OUT_] ' $$target[4]{$mode} ' did not eval into defined data
WARNING: Skipping Update of abc, inlast is not defined
WARNING: Skipping Update of abc, outlast is not defined
 
D:\mrtg-2.9.29\bin>

So it seems I need change some config, Can anyone know what should I change?
 
Best Regards.
 
 
 
 
 
 
-----Original Message-----
From: Chen Haitao-a15768 
Sent: Monday, January 19, 2004 5:02 PM
To: 'mrtg at list.ee.ethz.ch'
Subject: RE: Mrtg can not work with OID I identified





 

Hello Friends
 
I want to use MRTG to check how long one switch port did not be used, so I used the OID "'ifLastChange' => '1.3.6.1.2.1.2.2.1.9'" to identify the Target, the config file is belowed:
 
### Interface 314 >> Descr: '' | Name: '7/3' | Ip: '' | Eth: '00-0a-f4-05-eb-72' ###
 
Target[ABC]: 1.3.6.1.2.1.2.2.1.9.314 & 1.3.6.1.2.1.2.2.1.9.314:public at 10.193.5.250:
MaxBytes[ABC]: 12500000000000000
 
Title[ABC]: ifLastChange for 314 
PageTop[ABC]: <H1>Last Change for GE 7/3 -- </H1>
 
 <TABLE>
   <TR><TD>System:</TD>     <TD> MNAC</TD></TR>
   <TR><TD>Maintainer:</TD> <TD> </TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>7/3</TD></TR>
   <TR><TD>Port Name:</TD>  <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>125.0 MBytes/s</TD></TR>
 </TABLE>
Options[ABC]: gauge

 
 
but MRTG can not work, the error message is :
 
D:\mrtg-2.9.29\bin>perl mrtg mrtg1.cfg
Daemonizing MRTG ...
Do Not close this window. Or MRTG will die
ERROR: Target[abc][_IN_] '1.3.6.1.2.1.2.2.1.9.314 & 1.3.6.1.2.1.2.2.1.9. $$target[4]{$mode} ' evalua
ted to '???????????????????????????       2' instead of a number
ERROR: Target[abc][_OUT_] '1.3.6.1.2.1.2.2.1.9.314 & 1.3.6.1.2.1.2.2.1.9. $$target[4]{$mode} ' evalu
ated to '???????????????????????????      2' instead of a number
WARNING: Skipping Update of abc, inlast is not defined
WARNING: Skipping Update of abc, outlast is not defined
Terminating on signal SIGINT(2)
 
D:\mrtg-2.9.29\bin>
 
Can anyone help me?
 
Best Regards,
 
Haitao.
 
 
 
 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From pjam at xs4all.nl  Mon Jan 19 10:51:12 2004
From: pjam at xs4all.nl (Michel)
Date: Mon, 19 Jan 2004 10:51:12 +0100
Subject: [mrtg] Re: resolve  problem?
In-Reply-To: <20040118235812.GD30627@ctg-mail.binc.net>
Message-ID: <000001c3de71$c7afe510$050a0a0a@vudq>

Michael, everything is up and running!
Thank you for the hint. I should have noticed it myself (everything is
in the book in front of me!). What a shame! But about the backslashes, I
used the copy and paste method before (I installed it three times before
and got it running) and did'nt have any problems so that remains a bit
of a mystery to me. Alex and Takumi, thank you for your response as
well!

Regards

Michel

-----Oorspronkelijk bericht-----
Van: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
Namens Michael Grice
Verzonden: maandag 19 januari 2004 0:58
Aan: Michel
CC: mrtg at list.ee.ethz.ch
Onderwerp: [mrtg] Re: resolve problem?

* Michel <pjam at xs4all.nl> [040118 17:45] wrote:
> Hi Alex,
> 
> You were partly right. I removed the backslashes but still receive an
> error: can't resolve "ipref=ip" to IP address
> 
> I will look at it tomorrow. I guess it has something to do with the
> SNMP-version option.
> 
> Thanks for your quick response.
> 
> Regards,
> 
> MIchel
> 
> ./cfgmaker --global "WorkDir:/usr/local/apache/htdocs/mrtg" --global
> "IconDir:icons" --global "Options[_]:growright,bits"
> --snmp-options=:::::2 ipref=ip  metrobay at metro827 >mrtg.cfg
> --base: Get Device Info on public at ipref=ip:::::2
> Error:
>   can't resolve "ipref=ip" to IP address
>  at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 424 SNMPWALK
> Problem for public at ipref=ip:::::2:v4only  at ./cfgmaker line 825
> WARNING: Skipping public at ipref=ip:::::2 as no info could be retrieved

Michel,

It looks to me as if that should be --ifref=ip. I would bet
that, since there's no -- before ifref=ip, cfgmaker is interpreting
ifref=ip as the host name instead of metro827.

So change the end to  "--snmp-options=:::::2 --ipref=ip
metrobay at metro827" and I bet it works.
--Michael

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From pjam at xs4all.nl  Mon Jan 19 11:40:17 2004
From: pjam at xs4all.nl (Michel)
Date: Mon, 19 Jan 2004 11:40:17 +0100
Subject: [mrtg] Re: threshold problem
In-Reply-To: <BAY2-F672CUn4rineOl0002a29e@hotmail.com>
Message-ID: <000601c3de78$a0f2bbd0$050a0a0a@vudq>

Hi Avinash,

This might be the information you are looking for:


http://www.cloudnet.com/~tom/mrtg/thresh.html

or

http://www.ee.ethz.ch/~slist/mrtg/msg03962.html

regards

Michel




-----Oorspronkelijk bericht-----


Van: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
Namens avinash phogat
Verzonden: maandag 19 januari 2004 9:29
Aan: mrtg at list.ee.ethz.ch
CC: dan.mcdonald at austinenergy.com
Onderwerp: [mrtg] threshold problem

hello all

can u pls send me examples of an external program or script set up to
send 
an e-mail. I am using
linux platform Redhat 7.2

I want to use MRTG for sending mail wheneever threshold condition is
met, 
for example mail should go to defined mail id when ever CPU utilization
of 
router is exceeding 60% (I will set threshold as 60%)


Waiting for response.

Thanks in Advance.

Regards,
Avinash Phogat

_________________________________________________________________
Gujarat Kite Fest at http://go.msnserver.com/IN/40247.asp 
www.gujaratkitefest.com

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From eswar at mantraonline.com  Mon Jan 19 12:20:53 2004
From: eswar at mantraonline.com (Eswar)
Date: Mon, 19 Jan 2004 16:50:53 +0530
Subject: [mrtg] Re: threshold problem
References: <BAY2-F672CUn4rineOl0002a29e@hotmail.com>
Message-ID: <000701c3de7e$4d6b9e90$03031aac@bhartibroadband.com>

Are you sure that we need to use SMTP Perl module for the same ?

Regards

Eswar
----- Original Message ----- 
From: "avinash phogat" <avinash_phogat at hotmail.com>
To: <mrtg at list.ee.ethz.ch>
Cc: <dan.mcdonald at austinenergy.com>
Sent: Monday, January 19, 2004 1:58 PM
Subject: [mrtg] threshold problem


hello all

can u pls send me examples of an external program or script set up to send 
an e-mail. I am using
linux platform Redhat 7.2

I want to use MRTG for sending mail wheneever threshold condition is met, 
for example mail should go to defined mail id when ever CPU utilization of 
router is exceeding 60% (I will set threshold as 60%)


Waiting for response.

Thanks in Advance.

Regards,
Avinash Phogat

_________________________________________________________________
Gujarat Kite Fest at http://go.msnserver.com/IN/40247.asp 
www.gujaratkitefest.com

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jim.mozley at exponential-e.com  Mon Jan 19 17:18:35 2004
From: jim.mozley at exponential-e.com (Jim Mozley)
Date: Mon, 19 Jan 2004 16:18:35 +0000
Subject: [mrtg] Re: Inconsistant graphs that seem to disagree with rrd data
In-Reply-To: <1074282397.2301.175.camel@mcdonalddj-lnx.electric.ci.austin.tx.us>
References: <4007FAD5.6000305@exponential-e.com> <1074282397.2301.175.camel@mcdonalddj-lnx.electric.ci.austin.tx.us>
Message-ID: <400C035B.80201@exponential-e.com>

Daniel J McDonald wrote:


> there are two common problems you might be facing.  One is confusion
> between MB/s and Mb/s.  Make certain you are seeing bits everywhere
> instead of bytes.  As I recall, that was one of the things 14all wasn't
> terriblly good at, but that mrtg-rrd or routers2.cgi seemed to handle
> much better.

Thanks, the config does look OK and the results are OK for other interfaces.

> 
> The second is that 115mb/s is pretty close to the rollover point for
> 32bit counters.  You should use 64 bit counters at those speeds.

The 64 bit counters are being used as these are gig-e interfaces.


I've checked the graphs again and all is now OK; the historical data 
from the period when we were testing is now showing correctly on the 
weekly graph. No changes have been made to the configuration. The only 
think I can think that was different to the norm was that the interfaces 
were passing a constant volume of data, rather than the usual varying 
traffic.

I will have a look at using one of the alternative as you, Steve Shipway 
and Mohammed Ali have suggested. Although everything is now OK I don't 
want a repeat of this.

Thanks all for the help,

Jim

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From eswar at mantraonline.com  Mon Jan 19 18:17:38 2004
From: eswar at mantraonline.com (Eswar)
Date: Mon, 19 Jan 2004 22:47:38 +0530
Subject: [mrtg] Re: threshold problem
References: <000601c3de78$a0f2bbd0$050a0a0a@vudq>
Message-ID: <000701c3deb0$2394a3a0$03031aac@bhartibroadband.com>

Hi,

Here is my CFG file
---------------------------
WorkDir: /root/etm/thar/data
ThreshDir: /root/etm/thar/test
Directory[del-cust-dsl]: del-cust-dsl
Target[del-cust-dsl]: -\GigabitEthernet0/3:public at xxxxxxxxxx:
SetEnv[del-cust-dsl]: MRTG_INT_IP="xxxxxxxxxxxxx"
MRTG_INT_DESCR="Serial3/1/6"
MaxBytes[del-cust-dsl]: 8500000
ThreshMaxI[del-cust-dsl]: 30%
ThreshProgI[del-cust-dsl]: /root/etm/thar/testeri.pl
Title[del-cust-dsl]: Traffic Analysis for DEL-CUST-DSL ON FIBER
PageTop[del-cust-dsl]: <H1>Traffic Analysis for CUST-DEL ON FIBER FROM xxx
</H1>
 <TABLE>
   <TR><TD>Description:</TD><TD>GigabitEthernet0/3; used; CUST-DELHI DSL ON
FIBER FROM xxx </TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>68 Mbits/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>xxxxxxxxxxxx ()</TD></TR>
 </TABLE>

------------------------

And Script

#!/usr/bin/perl
$a=$ARGV[0];$b=$ARGV[1];$c=$ARGV[2];$logfile="records.txt";
open(LOG, ">>$logfile");
print LOG "$a, $b, $c\n";
close(LOG);


But this dont create any logfile. I have permission in the current
directory.

Please guide

Regards

Eswar
----- Original Message ----- 
From: "Michel" <pjam at xs4all.nl>
To: <mrtg at list.ee.ethz.ch>
Sent: Monday, January 19, 2004 4:10 PM
Subject: [mrtg] Re: threshold problem


Hi Avinash,

This might be the information you are looking for:


http://www.cloudnet.com/~tom/mrtg/thresh.html

or

http://www.ee.ethz.ch/~slist/mrtg/msg03962.html

regards

Michel




-----Oorspronkelijk bericht-----


Van: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
Namens avinash phogat
Verzonden: maandag 19 januari 2004 9:29
Aan: mrtg at list.ee.ethz.ch
CC: dan.mcdonald at austinenergy.com
Onderwerp: [mrtg] threshold problem

hello all

can u pls send me examples of an external program or script set up to
send
an e-mail. I am using
linux platform Redhat 7.2

I want to use MRTG for sending mail wheneever threshold condition is
met,
for example mail should go to defined mail id when ever CPU utilization
of
router is exceeding 60% (I will set threshold as 60%)


Waiting for response.

Thanks in Advance.

Regards,
Avinash Phogat

_________________________________________________________________
Gujarat Kite Fest at http://go.msnserver.com/IN/40247.asp
www.gujaratkitefest.com

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From pjam at xs4all.nl  Mon Jan 19 22:35:44 2004
From: pjam at xs4all.nl (Michel)
Date: Mon, 19 Jan 2004 22:35:44 +0100
Subject: [mrtg] command not found
Message-ID: <000001c3ded4$321d2630$050a0a0a@vudq>

Hello,

This program is driving me nuts.
As told before I managed to install this program three times before
without any problems. This time I did not  follow the instructions on
the MRTG page (like I did before) but I just installed the mrtg package
for the other packages as described on the page are already on my system
(RH 9.0).

The  installation goes fine, do not see any errors, I installed apache
in /usr/local/apache2 and the working dir is set to
/usr/loc/apache2/mrtg.
The icon dir is set to /usr/loc/apache2/mrtg/icons

When I run CFGMAKER I don.t see any errors. But now it comes, when I try
to start the cfg file (after doing a chmod 700) I see the following
errors:

[root at metro cfg]# ./metro.cfg
./metro.cfg: line 18: EnableIPv6:: command not found
./metro.cfg: line 19: WorkDir:: command not found
./metro.cfg: line 20: Options[_]:: command not found
./metro.cfg: line 54: Target[metro827_10.10.10.1]:: command not found
./metro.cfg: line 55: SetEnv[metro827_10.10.10.1]:: command not found
./metro.cfg: line 56: MaxBytes[metro827_10.10.10.1]:: command not found
./metro.cfg: line 57: Title[metro827_10.10.10.1]:: command not found
./metro.cfg: line 58: syntax error near unexpected token `newline'
./metro.cfg: line 58: `PageTop[metro827_10.10.10.1]: <H1>Traffic
Analysis for 10.10.10.1 -- wg_r_b</H1>'

I reinstalled the whole thing three times, did several make cleans, but
no luck.
I have been looking al day in the newsgroup but did not find something
alike, so I guess I must doing something really stupid.

Anyone had the same problem?

Michel

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From pjam at xs4all.nl  Tue Jan 20 00:03:18 2004
From: pjam at xs4all.nl (Michel)
Date: Tue, 20 Jan 2004 00:03:18 +0100
Subject: [mrtg] Re: command not found
In-Reply-To: <000001c3ded4$321d2630$050a0a0a@vudq>
Message-ID: <000601c3dee0$6d8e51b0$050a0a0a@vudq>

This problem is solved, was running mrtg.cfg instead of mrtg, which is
quite stupid. 

Michel


-----Oorspronkelijk bericht-----
Van: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
Namens Michel
Verzonden: maandag 19 januari 2004 22:36
Aan: mrtg at list.ee.ethz.ch
Onderwerp: [mrtg] command not found

Hello,

This program is driving me nuts.
As told before I managed to install this program three times before
without any problems. This time I did not  follow the instructions on
the MRTG page (like I did before) but I just installed the mrtg package
for the other packages as described on the page are already on my system
(RH 9.0).

The  installation goes fine, do not see any errors, I installed apache
in /usr/local/apache2 and the working dir is set to
/usr/loc/apache2/mrtg.
The icon dir is set to /usr/loc/apache2/mrtg/icons

When I run CFGMAKER I don.t see any errors. But now it comes, when I try
to start the cfg file (after doing a chmod 700) I see the following
errors:

[root at metro cfg]# ./metro.cfg
./metro.cfg: line 18: EnableIPv6:: command not found
./metro.cfg: line 19: WorkDir:: command not found
./metro.cfg: line 20: Options[_]:: command not found
./metro.cfg: line 54: Target[metro827_10.10.10.1]:: command not found
./metro.cfg: line 55: SetEnv[metro827_10.10.10.1]:: command not found
./metro.cfg: line 56: MaxBytes[metro827_10.10.10.1]:: command not found
./metro.cfg: line 57: Title[metro827_10.10.10.1]:: command not found
./metro.cfg: line 58: syntax error near unexpected token `newline'
./metro.cfg: line 58: `PageTop[metro827_10.10.10.1]: <H1>Traffic
Analysis for 10.10.10.1 -- wg_r_b</H1>'

I reinstalled the whole thing three times, did several make cleans, but
no luck.
I have been looking al day in the newsgroup but did not find something
alike, so I guess I must doing something really stupid.

Anyone had the same problem?

Michel

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From eswar at mantraonline.com  Tue Jan 20 06:35:31 2004
From: eswar at mantraonline.com (Eswar)
Date: Tue, 20 Jan 2004 11:05:31 +0530
Subject: [mrtg] Re: threshold problem
References: <036501c3dec9$88496510$b004d882@itss.auckland.ac.nz>
Message-ID: <003f01c3df17$38585220$03031aac@bhartibroadband.com>

> Suggestions --
> 1) try running the script from the command line.  Does it create a
logfile?
> If not, problem is with script.

Tried and yes the script is creating file.

> 2) Check perl path is correct in script, and script has execute permission
> (rwxr-xr-x)

It is correct as tested from the command line. Execute permission given to
all (chmod +x script.pl)

> 3) Check permissions are correct for the MRTG user, ie, the user the
script
> will run as, not necessarily your own user.

Both are same user (root). Owner and the MRTG user(I know its not
recommended but i am going crazy with this problem)

> 4) Usually it is recommended to put the Target[] line as the first
> definition line for a given targetname

Done.

Regards

Eswar

New CFG File
---------------
WorkDir: /root/etm/thar/data
ThreshDir: /root/etm/thar/test


Target[del-btnl-dsl]: -\GigabitEthernet0/3:qh$\@kl at 61.95.250.3:
Directory[del-btnl-dsl]: del-btnl-dsl
SetEnv[del-btnl-dsl]: MRTG_INT_IP="202.56.235.249"
MRTG_INT_DESCR="Serial3/1/6"
MaxBytes[del-btnl-dsl]: 8500000
ThreshMaxI[del-btnl-dsl]: 30%
ThreshProgI[del-btnl-dsl]: /root/etm/thar/testeri.pl
Title[del-btnl-dsl]: Traffic Analysis for DEL-BTNL-DSL ON FIBER
PageTop[del-btnl-dsl]: <H1>Traffic Analysis for BTNL-DEL ON FIBER FROM 234
</H1>
 <TABLE>
   <TR><TD>Description:</TD><TD>GigabitEthernet0/3; used; BTNL-DELHI DSL ON
FIBER FROM 234 </TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>68 Mbits/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>202.56.235.249 ()</TD></TR>
 </TABLE>


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Jaun.Keeve at 2cana.co.za  Tue Jan 20 09:50:05 2004
From: Jaun.Keeve at 2cana.co.za (Jaun Keeve)
Date: Tue, 20 Jan 2004 10:50:05 +0200
Subject: [mrtg] multi cpu on one graph
Message-ID: <546D7E85F5798447966A5814064A1C4B036A39@dbnms01.oldfort.co.za>

Hi

I have a w2k server with 4 cpu's. I am able to graph each cpu individually with mrtg, but I would like to have all 4 on one graph
Browsing the Oids I get 
cpu1 .1.3.6.1.4.1.9600.1.1.5.1.48
cpu1 .1.3.6.1.4.1.9600.1.1.5.1.49
cpu1 .1.3.6.1.4.1.9600.1.1.5.1.50
cpu1 .1.3.6.1.4.1.9600.1.1.5.1.51

but I am not sure how to incorporate this in one graph. Any help would be appreciated

cheers Jaun

Target[KZN8_CPU]: .1.3.6.1.4.1.9600.1.1.5.1.48&.1.3.6.1.4.1.9600.1.1.5.1.48:public at 1.1.1.1:
#SystemUptime[KZN8_cpu]: public at 1.1.1.1
MaxBytes[KZN8_cpu]: 100
Title[KZN8_cpu]: CPU LOAD
PageTop[KZN8_cpu]: <H1>CPU Load %</H1>
Unscaled[KZN8_cpu]: ymwd
YLegend[KZN8_cpu]: CPU#1 Utilization
Legend1[KZN8_cpu]: CPU#1 Utilization in % (Load)
Legend2[KZN8_cpu]: CPU#1 Utilization in % (Load)
Legend3[KZN8_cpu]:
Legend4[KZN8_cpu]:
LegendI[KZN8_cpu]:
LegendO[KZN8_cpu]: &nbsp;Usage
Options[KZN8_cpu]: gauge

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Jaun.Keeve at 2cana.co.za  Tue Jan 20 10:21:47 2004
From: Jaun.Keeve at 2cana.co.za (Jaun Keeve)
Date: Tue, 20 Jan 2004 11:21:47 +0200
Subject: [mrtg] Re: multi cpu on one graph
Message-ID: <546D7E85F5798447966A5814064A1C4B39E52E@dbnms01.oldfort.co.za>

Sorry....I am a cut and past expert

cpu1 .1.3.6.1.4.1.9600.1.1.5.1.48
cpu2 .1.3.6.1.4.1.9600.1.1.5.1.49
cpu3 .1.3.6.1.4.1.9600.1.1.5.1.50
cpu4 .1.3.6.1.4.1.9600.1.1.5.1.51

-----Original Message-----
From: Jaun Keeve 
Sent: 20 January 2004 10:50
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] multi cpu on one graph


Hi

I have a w2k server with 4 cpu's. I am able to graph each cpu individually with mrtg, but I would like to have all 4 on one graph
Browsing the Oids I get 
cpu1 .1.3.6.1.4.1.9600.1.1.5.1.48
cpu1 .1.3.6.1.4.1.9600.1.1.5.1.49
cpu1 .1.3.6.1.4.1.9600.1.1.5.1.50
cpu1 .1.3.6.1.4.1.9600.1.1.5.1.51

but I am not sure how to incorporate this in one graph. Any help would be appreciated

cheers Jaun

Target[KZN8_CPU]: .1.3.6.1.4.1.9600.1.1.5.1.48&.1.3.6.1.4.1.9600.1.1.5.1.48:public at 1.1.1.1:
#SystemUptime[KZN8_cpu]: public at 1.1.1.1
MaxBytes[KZN8_cpu]: 100
Title[KZN8_cpu]: CPU LOAD
PageTop[KZN8_cpu]: <H1>CPU Load %</H1>
Unscaled[KZN8_cpu]: ymwd
YLegend[KZN8_cpu]: CPU#1 Utilization
Legend1[KZN8_cpu]: CPU#1 Utilization in % (Load)
Legend2[KZN8_cpu]: CPU#1 Utilization in % (Load)
Legend3[KZN8_cpu]:
Legend4[KZN8_cpu]:
LegendI[KZN8_cpu]:
LegendO[KZN8_cpu]: &nbsp;Usage
Options[KZN8_cpu]: gauge

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From dan.mcdonald at austinenergy.com  Tue Jan 20 16:53:35 2004
From: dan.mcdonald at austinenergy.com (Daniel J McDonald)
Date: Tue, 20 Jan 2004 09:53:35 -0600
Subject: [mrtg] Re: Mrtg can not work with OID I identified
In-Reply-To: <89DEFCC5DB33D411A27F00508BCF8A82135CE495@ZCH07EXM05.corp.mot.com>
References: 
	 <89DEFCC5DB33D411A27F00508BCF8A82135CE495@ZCH07EXM05.corp.mot.com>
Message-ID: <1074614015.32350.54.camel@mcdonalddj-lnx.electric.ci.austin.tx.us>

On Mon, 2004-01-19 at 03:34, Chen Haitao-a15768 wrote:
>  
> I got the correct date, but still can not make graph, the error is :
>  
> D:\mrtg-2.9.29\bin>perl mrtg mrtg1.cfg
> WARNING: Expected a number but got '21 days, 9:28:26'
> WARNING: Expected a number but got '21 days, 9:28:26'
> ERROR: Target[abc][_IN_] ' $$target[4]{$mode} ' did not eval into defined data
> ERROR: Target[abc][_OUT_] ' $$target[4]{$mode} ' did not eval into defined data
> WARNING: Skipping Update of abc, inlast is not defined
> WARNING: Skipping Update of abc, outlast is not defined
>  

> So it seems I need change some config, Can anyone know what should I change?

>From the snmp_util release notes:
BER.pm 0.72: A new variable, $BER::pretty_print_timeticks, has been
introduced to give users control over the degree of pretty-printing of
TimeTicks values. If left at the defaults, TimeTicks values will be
converted to strings such as 14 days, 6:56:07. If you set it to zero,
the same value will simply pretty-print as 123456789, which should be
interpreted in units (ticks) of 10ms.

Ok, so from that we can discern that we have to twiddle
$BER::pretty_print_timeticks to make it work.  I used to remember how to
do that on the fly , but it escapes me right now.
-- 
Daniel J McDonald <dan.mcdonald at austinenergy.com>
Austin Energy

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jeff at eaznet.com  Tue Jan 20 18:39:04 2004
From: jeff at eaznet.com (Jeff Gojkovich)
Date: Tue, 20 Jan 2004 10:39:04 -0700 (MST)
Subject: [mrtg] Re: multi cpu on one graph
In-Reply-To: <546D7E85F5798447966A5814064A1C4B39E52E@dbnms01.oldfort.co.za>
References: <546D7E85F5798447966A5814064A1C4B39E52E@dbnms01.oldfort.co.za>
Message-ID: <13534.198.182.70.58.1074620344.squirrel@www.eaznet.com>

> cpu1 .1.3.6.1.4.1.9600.1.1.5.1.48
> cpu2 .1.3.6.1.4.1.9600.1.1.5.1.49
> cpu3 .1.3.6.1.4.1.9600.1.1.5.1.50
> cpu4 .1.3.6.1.4.1.9600.1.1.5.1.51

>
> I have a w2k server with 4 cpu's. I am able to graph each cpu individually
> with mrtg, but I would like to have all 4 on one graph
> Browsing the Oids I get
> cpu1 .1.3.6.1.4.1.9600.1.1.5.1.48
> cpu1 .1.3.6.1.4.1.9600.1.1.5.1.49
> cpu1 .1.3.6.1.4.1.9600.1.1.5.1.50
> cpu1 .1.3.6.1.4.1.9600.1.1.5.1.51
>
> but I am not sure how to incorporate this in one graph. Any help would be
> appreciated


RRD-Tool is the only way to get more than two items in one graph. MRTG
does not have that capability.

--
Jeff

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From rcastro at dsi.uanl.mx  Tue Jan 20 19:59:04 2004
From: rcastro at dsi.uanl.mx (Ramses Jacinto Castro)
Date: Tue, 20 Jan 2004 12:59:04 -0600
Subject: [mrtg] troubles on solaris
Message-ID: <a05dcee9.cee9a05d@uanl.mx>


Hi there, I am trying to use mrtg on solaris 9 but every time a cfg file
try to create the pages the follow error is displayed

ERROR: Can't Execute 'opt/mrtg-2.10.12/bin/rateup'

the rute where the cfg is located is '/opt/mrtg-2.10.12/bin' I all ready
check the cfg file but coud not find anything wrong.

best regards

Atte: Rams?s Jacinto Castro
Universidad Autonoma de Nuevo Le?n
Laboratorio de Interoperabilidad


 
 


 Atte: Rams?s Jacinto Castro
 Universidad Autonoma de Nuevo Le?n
 Laboratorio de Interoperabilidad
 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From s.shipway at auckland.ac.nz  Tue Jan 20 21:12:12 2004
From: s.shipway at auckland.ac.nz (Steve Shipway)
Date: Wed, 21 Jan 2004 09:12:12 +1300
Subject: [mrtg] Re: multi cpu on one graph
In-Reply-To: <546D7E85F5798447966A5814064A1C4B036A39@dbnms01.oldfort.co.za>
Message-ID: <06cf01c3df91$b0956aa0$b004d882@itss.auckland.ac.nz>

>I have a w2k server with 4 cpu's. I am able to graph each cpu 
>individually with mrtg, but I would like to have all 4 on one 
>graph Browsing the Oids I get 
You can't do this with vanilla MRTG, you need to have RRDTool in the
backend.  If you also use routers2.cgi as your frontend, you can configure a
UserDefined graph over the 4 targets, eg:

Target[cpu1]: ...etc..
Target[cpu2]: ...etc..
Target[cpu3]: ...etc..
Target[cpu4]: ...etc..
..etc..
routers.cgi*Graph[cpu1]: cpu_all "All CPUs" total average fixunit noo
routers.cgi*Graph[cpu2]: cpu_all 
routers.cgi*Graph[cpu3]: cpu_all 
routers.cgi*Graph[cpu4]: cpu_all

This will generate a 4-line graph, using the Incoming lines on the cpu
targets, and add a total and and average line to the new graph.  Display
options for the userdefined graph will be inherited from the cpu1 target.

(yes, I am slightly biased towards routers.cgi, but this solution does work.
You may also be able to do this in mrtg-rrd.cgi? :)

Steve

---
Steve Shipway: ITSS, University of Auckland
Email: s.shipway at auckland.ac.nz  Web: http://www.steveshipway.org/  
** We can only discover new oceans when we have the **
** courage to lose sight of the shore.              **

-- Attached file removed by Ecartis and put at URL below --
-- Type: text/x-vcard
-- Size: 155 bytes
-- URL : http://www.ee.ethz.ch/~slist/p/09-Steve%20Shipway.vcf


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From eric.aleci at wanadoo.fr  Tue Jan 20 22:30:37 2004
From: eric.aleci at wanadoo.fr (Eric Aleci)
Date: Tue, 20 Jan 2004 22:30:37 +0100
Subject: [mrtg] BBMRTG.PL DON'T SHOW GRAPH IN BB
Message-ID: <000001c3df9c$a5371a90$0200a8c0@rico>

Hi gentles
Before my environnement
Debian 3.0 R1
MRTG using RRDTOOLS an mrtg-rrd.cgi
and
BigBrother

I want to see the MRTG graph in Big Bother using the script bbmrtg.pl.
But it is not work properly and i see the html code of the page inmy
browser, you can see that in the attached file.

When i run the scipt outside from BB i can see the graph! 

Thank you in advance for your Help

Eric ALECI
P at sswd
mailto:eric.aleci at wanadoo.fr


-- Attached file removed by Ecartis and put at URL below --
-- Type: image/gif
-- Size: 33k (34134 bytes)
-- URL : http://www.ee.ethz.ch/~slist/p/bbmrtgerr01.gif


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Tue Jan 20 23:52:27 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Tue, 20 Jan 2004 23:52:27 +0100
Subject: [mrtg] Re: Inconsistant graphs that seem to disagree with rrd data
In-Reply-To: <400C035B.80201@exponential-e.com>; from jim.mozley@exponential-e.com on Mon, Jan 19, 2004 at 04:18:35PM +0000
References: <4007FAD5.6000305@exponential-e.com> <1074282397.2301.175.camel@mcdonalddj-lnx.electric.ci.austin.tx.us> <400C035B.80201@exponential-e.com>
Message-ID: <20040120235227.A31778@slot.hollandcasino.net>

On Mon, Jan 19, 2004 at 04:18:35PM +0000, Jim Mozley wrote:

>             . No changes have been made to the configuration. The only 
> think I can think that was different to the norm was that the interfaces 
> were passing a constant volume of data, rather than the usual varying 
> traffic.

If you mean ___*really*___ constant, this usually is a sign that MRTG
was unable to read the remote device _and_ that you have no "UnknAsZero"
option set.

When monitoring resumes, the gap in time is filled with the rate at
that time, resulting in a somewhat large amount of time having the
same rate.

This does not explain any of the other problems you describe but I'd
like to let you know anyway.

HTH
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From p_thompson at mac.com  Wed Jan 21 05:31:00 2004
From: p_thompson at mac.com (Paul Thompson)
Date: Tue, 20 Jan 2004 23:31:00 -0500
Subject: [mrtg] Setup question
Message-ID: <9D9A5FB4-4BCA-11D8-BAD4-0003931D12E6@mac.com>

  Hi,

  First of all, let me apologize for such a basic question, but here 
goes.  I'm trying to learn how to set up MRTG.  I followed the 
instructions from this site: 
http://www.stepwise.com/Articles/Workbench/2001-11-13.01.html to 
download and install it on my OSX machine, but now I'm kind of stuck.  
I want to set up mrtg to monitor my nortel switches but I'm not sure 
what I need to do to configure it .  Admittedly, my ability with the 
command line is not as strong as it should be, so I was wondering if 
anyone out there might know of a link that they could point me to that 
might be able to assist me.

   Thank you in advance,

   Paul

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jim.mozley at exponential-e.com  Wed Jan 21 10:47:26 2004
From: jim.mozley at exponential-e.com (Jim Mozley)
Date: Wed, 21 Jan 2004 09:47:26 +0000
Subject: [mrtg] Re: Inconsistant graphs that seem to disagree with rrd
 data
In-Reply-To: <20040120235227.A31778@slot.hollandcasino.net>
References: <4007FAD5.6000305@exponential-e.com> <1074282397.2301.175.camel@mcdonalddj-lnx.electric.ci.austin.tx.us> <400C035B.80201@exponential-e.com> <20040120235227.A31778@slot.hollandcasino.net>
Message-ID: <400E4AAE.6090501@exponential-e.com>

Alex van den Bogaerdt wrote:

> On Mon, Jan 19, 2004 at 04:18:35PM +0000, Jim Mozley wrote:
> 
> 
>>            . No changes have been made to the configuration. The only 
>>think I can think that was different to the norm was that the interfaces 
>>were passing a constant volume of data, rather than the usual varying 
>>traffic.
> 
> 
> If you mean ___*really*___ constant, this usually is a sign that MRTG
> was unable to read the remote device _and_ that you have no "UnknAsZero"
> option set.
> 
> When monitoring resumes, the gap in time is filled with the rate at
> that time, resulting in a somewhat large amount of time having the
> same rate.
> 
> This does not explain any of the other problems you describe but I'd
> like to let you know anyway.
> 
> HTH
> Alex

Thanks Alex for pointing this out, but the reason it was constant (I 
should have said nearly constant) was because a traffic generator was 
being used at a constant output. I'm aware of the UnknAsZero option.

I guess the cause will remain unknown; the graph showed around 150 Mb/s 
during the network testing on the daily graphs (when it should have been 
around 115 Mb/s) and now shows correctly on the weekly graph at around 
115 Mb/s.

Thanks again,

Jim


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From koushik_82 at yahoo.com  Wed Jan 21 10:59:23 2004
From: koushik_82 at yahoo.com (Koushik Radhakrishnan)
Date: Wed, 21 Jan 2004 01:59:23 -0800 (PST)
Subject: [mrtg] Usage of Mrtg Threshold Checking facility
Message-ID: <20040121095923.46054.qmail@web41013.mail.yahoo.com>

Hi 

   I have recently started working with Mrtg.I run it
on Windows2000,NT platforms.I have intrested in using
the threshold capacity feature of Mrtg.If someone
could provide me with an example of setting up this
option i would really grateful.

Thanking You
Koushik

__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From gvan+mrtg at kaluga.ru  Wed Jan 21 13:20:28 2004
From: gvan+mrtg at kaluga.ru (Anton Gnusov)
Date: Wed, 21 Jan 2004 15:20:28 +0300
Subject: [mrtg] Stange peaks on graphs
Message-ID: <03185280.20040121152028@kaluga.ru>

Sometimes mrtg at data acquisition from the SNMP-agent informs on a
error:

SNMP Error:
no response received
SNMPv1_Session (remote host: "x.x.143.2" [x.x.143.2].161)
                  community: "yy"
                 request ID: 197766777
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 487
SNMPGET Problem for ifDescr.2 ifInOctets.2 ifDescr.2 ifOutOctets.2 sysUptime sysName on yy at x.x.143.2::::::v4only
 at /usr/local/mrtg-2/bin/mrtg line 1829
WARNING: Could not match host:'yy at x.x.143.2' ref:'Descr' key:'FastEthernet0/1'
ERROR: Target[zz][_IN_] ' $target->[39]{$mode} ' did not eval into defined data
ERROR: Target[zz][_OUT_] ' $target->[39]{$mode} ' did not eval into defined data

At that moment there is a peak equal approximately to half "MaxBytes"
parameter. If to have
time to look at present a file yy.log in the top line will be:
1074672962 -1 -1
I.e. for any reason SNMP counters for the input and output traffic are
equal -1

OS version - FBSD 4.7, mrtg version - 2.10.13

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From mwlucas at blackhelicopters.org  Wed Jan 21 13:59:17 2004
From: mwlucas at blackhelicopters.org (Michael W. Lucas)
Date: Wed, 21 Jan 2004 07:59:17 -0500
Subject: [mrtg] aggregating several links
Message-ID: <20040121125917.GA3622@bewilderbeast.blackhelicopters.org>


Hi,

I have three load-balanced T1 circuits on a Cisco router, each of
which can easily be graphed separately.  While I can add this up and
get a rough idea of how much bandwidth is being used at any time, it's
rather annoying.

Is it possible to create a single graph that shows the aggregate of
all bandwidth going over all these circuits?  I seem to recall
something about this being possible from a few years ago, but can't
find it now.

Anyone have any ideas?

Thanks,
==ml

-- 
Michael Lucas		mwlucas at FreeBSD.org, mwlucas at BlackHelicopters.org
Today's chance of throwing it all away to start a goat farm: 41.8%
		http://www.BlackHelicopters.org/~mwlucas/
           Absolute OpenBSD:   http://www.AbsoluteOpenBSD.com/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From guidescape at chilitech.net  Wed Jan 21 14:27:01 2004
From: guidescape at chilitech.net (Guidescape)
Date: 21 Jan 2004 08:27:01 -0500
Subject: [mrtg] Problem with graphs
Message-ID: <1074691620.22027.11.camel@hopper>

Hi,
I'm having an issue with 'down spikes'  You can see an example here:
http://www.matthoppes.org/example.png

This is happening at the same time across all 3 of my routers except
one.   The one that is not having an issue is the one that all of my
SNMP requests to the OTHER 3 routers need to go through.

They are all cisco routers, and the issue has just recently started...
to my knowledge there is no SNMP throtteling or anything going on on the
routers, I've checked the config.   Sometimes it will be fine for hours,
othertimes it will take a dive several times in one hour.

This is what I get on the MRTG console:

SNMPv1_Session (remote host: "xxxxxx.chilitech.net" [65.165.xx.xx].xxx)
    community: "xxxxxx"
    request ID: 510344354
    PDU bufsize: 8000 bytes
    timeout:  2s
    retries: 5
    backoff: 1)
SNMPGET Problem for ifInOctets.2 ifOutOctets.2 sysUptime sysName on
xxxxx at xxxxxx.chilitech.net
WARNING: Expected a number but got ''
WARNING: Expected a number but got ''

Any ideas?

-- 
Guidescape <guidescape at chilitech.net>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From peter_glanville at cuk.canon.co.uk  Wed Jan 21 15:07:18 2004
From: peter_glanville at cuk.canon.co.uk (Peter Glanville)
Date: Wed, 21 Jan 2004 14:07:18 +0000
Subject: [mrtg] Re: aggregating several links
Message-ID: <OFADB60984.5870FB8A-ON80256E22.004D1DBB@cuk.canon.co.uk>



> Is it possible to create a single graph that shows the aggregate of
> all bandwidth going over all these circuits?

Option 1.
Target[Total]: 1:public at IP + 2:public at IP + 3:public at IP

Option 2.
Upgrade to RRD. Monitor the three separately. Use Routers2.cgi, user
defined graph, totals

Peter





--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From mwlucas at blackhelicopters.org  Wed Jan 21 15:26:53 2004
From: mwlucas at blackhelicopters.org (Michael W. Lucas)
Date: Wed, 21 Jan 2004 09:26:53 -0500
Subject: [mrtg] Re: aggregating several links
In-Reply-To: <OFADB60984.5870FB8A-ON80256E22.004D1DBB@cuk.canon.co.uk>
References: <OFADB60984.5870FB8A-ON80256E22.004D1DBB@cuk.canon.co.uk>
Message-ID: <20040121142652.GA4778@bewilderbeast.blackhelicopters.org>

On Wed, Jan 21, 2004 at 02:07:18PM +0000, Peter Glanville wrote:
> 
> 
> > Is it possible to create a single graph that shows the aggregate of
> > all bandwidth going over all these circuits?
> 
> Option 1.
> Target[Total]: 1:public at IP + 2:public at IP + 3:public at IP

Thank you!

> Option 2.
> Upgrade to RRD. Monitor the three separately. Use Routers2.cgi, user
> defined graph, totals

I plan to migrate, some day.  Mind you, it won't become urgent until
the little P200 finally takes more than 5 minutes to run all the MRTG
jobs I have on it. :-)

==ml

-- 
Michael Lucas		mwlucas at FreeBSD.org, mwlucas at BlackHelicopters.org
Today's chance of throwing it all away to start a goat farm: 41.8%
		http://www.BlackHelicopters.org/~mwlucas/
           Absolute OpenBSD:   http://www.AbsoluteOpenBSD.com/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From simon.westlake at bizwi.rr.com  Wed Jan 21 15:38:10 2004
From: simon.westlake at bizwi.rr.com (Simon Westlake)
Date: Wed, 21 Jan 2004 08:38:10 -0600
Subject: [mrtg] Trying to gather definitive negative graphing information
Message-ID: <200401210838100559.238DF6E7@smtp.biz.rr.com>

I'm still troubleshooting the negative value graphing issue I'm having (http://24.123.87.13/img/misgraphed.png) and so I'm trying to gather some information to figure out where the problem might lie.

For anyone successfully graphing negative values in MRTG:

Are you using 14all, mrtg-rrd or routers2?
What tuning options did you use on your .rrd files?
Did you have to do anything else in order to get the graph to display properly?

Any other useful information appreciated..


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From rsutton at centra.com  Wed Jan 21 17:47:03 2004
From: rsutton at centra.com (Sutton, Rob)
Date: Wed, 21 Jan 2004 11:47:03 -0500
Subject: [mrtg] Re: ASP.NET version of 14all.cgi 
Message-ID: <9B46CC0C7C48D51182AC00508BC773180152BD41@raleigh01.centra.com>

Just wondering if this is still going to come out? :-)

-----Original Message-----
From: Sutton, Rob [mailto:rsutton at centra.com] 
Sent: Saturday, December 27, 2003 11:29 AM
To: 'Van den Bossche Eric'; 'MRTG (E-mail)'
Subject: [mrtg] Re: ASP.NET version of 14all.cgi 

Any word on this? :-)

-----Original Message-----
From: Van den Bossche Eric [mailto:E.VDB at sherwineu.com] 
Sent: Saturday, December 20, 2003 8:31 AM
To: 'MRTG (E-mail)'
Subject: [mrtg] Re: ASP.NET version of 14all.cgi 

Can you guys tell me how you are using 14all.cgi at the moment?

- config file for erach target
- 1 config file with includes
- ???

Thanks,

Eric - Italy

-----Original Message-----
From: Van den Bossche Eric 
Sent: Saturday, 20 December, 2003 14:27
To: 'Robert Holley'; Mike Prezbindowski; Van den Bossche Eric; MRTG
(E-mail)
Subject: RE: [mrtg] Re: ASP.NET version of 14all.cgi 


Robert,

i'm still finishing it. As soon as the 1st version is ready I will post it
here.

Greetings

Eric - Italy

-----Original Message-----
From: Robert Holley [mailto:rholley at cisco.com]
Sent: Saturday, 20 December, 2003 14:20
To: Mike Prezbindowski; 'Van den Bossche Eric'; MRTG (E-mail)
Subject: RE: [mrtg] Re: ASP.NET version of 14all.cgi 


Eric,

If you post the location of the ASP.NET version, please send it to the
entire list. I'd be interested also.

regards
============================================
Robert Holley
Network Consulting Engineer
Global Solutions Engineering

Cisco Systems
7025 Kit Creek Road.
Research Triangle Park, NC 27709
Phone:  +1 919-392-2359
Pager:   +1 800-796-7363 pin 100-9187
============================================

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From guidescape at chilitech.net  Wed Jan 21 19:19:25 2004
From: guidescape at chilitech.net (Guidescape)
Date: 21 Jan 2004 13:19:25 -0500
Subject: [mrtg] Re: Problem with graphs
In-Reply-To: <400E80D0.7040008@templin.org>
References: <1074691620.22027.11.camel@hopper>
	 <400E80D0.7040008@templin.org>
Message-ID: <1074709164.22027.24.camel@hopper>

Nope... that didn't work.. still getting the down spikes... which is
odd.. because it shouldn't now with that option not set.. do I need to
explicitly tell it to NOT do it? I had had unknozero (or whatever the
line is) but that's now removed)


On Wed, 2004-01-21 at 08:38, Pete Templin wrote:
> I've seen this with the unknown as zero option set in my config, most 
> often on interfaces that move enough traffic to incur a counter rollover 
> at this same time.  I've heard some versions don't handle counter 
> rollover well.
> 
> Guidescape wrote:
> 
> > Hi,
> > I'm having an issue with 'down spikes'  You can see an example here:
> > http://www.matthoppes.org/example.png
> > 
> > This is happening at the same time across all 3 of my routers except
> > one.   The one that is not having an issue is the one that all of my
> > SNMP requests to the OTHER 3 routers need to go through.

> > 
-- 
Guidescape <guidescape at chilitech.net>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From E.VDB at sherwineu.com  Wed Jan 21 20:10:36 2004
From: E.VDB at sherwineu.com (Van den Bossche Eric)
Date: Wed, 21 Jan 2004 20:10:36 +0100
Subject: [mrtg] Re: ASP.NET version of 14all.cgi 
Message-ID: <166E6675796A7247A7BC787D7AD12C9B159933@mail.sherwineu.com>

Guy's,

you can be sure that i will release a beta version soon.
Remember that I'm working on this in my spare time which is not so much
if you know that i have 4 beautifull and time absorbing kids !!!

Greetings Eric - Italy

-----Original Message-----
From: Sutton, Rob [mailto:rsutton at centra.com]
Sent: Wednesday, 21 January, 2004 17:47
To: 'Van den Bossche Eric'; 'MRTG (E-mail)'
Subject: RE: [mrtg] Re: ASP.NET version of 14all.cgi 


Just wondering if this is still going to come out? :-)

-----Original Message-----
From: Sutton, Rob [mailto:rsutton at centra.com] 
Sent: Saturday, December 27, 2003 11:29 AM
To: 'Van den Bossche Eric'; 'MRTG (E-mail)'
Subject: [mrtg] Re: ASP.NET version of 14all.cgi 

Any word on this? :-)

-----Original Message-----
From: Van den Bossche Eric [mailto:E.VDB at sherwineu.com] 
Sent: Saturday, December 20, 2003 8:31 AM
To: 'MRTG (E-mail)'
Subject: [mrtg] Re: ASP.NET version of 14all.cgi 

Can you guys tell me how you are using 14all.cgi at the moment?

- config file for erach target
- 1 config file with includes
- ???

Thanks,

Eric - Italy

-----Original Message-----
From: Van den Bossche Eric 
Sent: Saturday, 20 December, 2003 14:27
To: 'Robert Holley'; Mike Prezbindowski; Van den Bossche Eric; MRTG
(E-mail)
Subject: RE: [mrtg] Re: ASP.NET version of 14all.cgi 


Robert,

i'm still finishing it. As soon as the 1st version is ready I will post it
here.

Greetings

Eric - Italy

-----Original Message-----
From: Robert Holley [mailto:rholley at cisco.com]
Sent: Saturday, 20 December, 2003 14:20
To: Mike Prezbindowski; 'Van den Bossche Eric'; MRTG (E-mail)
Subject: RE: [mrtg] Re: ASP.NET version of 14all.cgi 


Eric,

If you post the location of the ASP.NET version, please send it to the
entire list. I'd be interested also.

regards
============================================
Robert Holley
Network Consulting Engineer
Global Solutions Engineering

Cisco Systems
7025 Kit Creek Road.
Research Triangle Park, NC 27709
Phone:  +1 919-392-2359
Pager:   +1 800-796-7363 pin 100-9187
============================================

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From mwlucas at blackhelicopters.org  Wed Jan 21 21:15:52 2004
From: mwlucas at blackhelicopters.org (Michael W. Lucas)
Date: Wed, 21 Jan 2004 15:15:52 -0500
Subject: [mrtg] which snmp2ca/perf2mib values to track?
Message-ID: <20040121201552.GA9774@bewilderbeast.blackhelicopters.org>


Hi,

One more question, then I'll shut up.  Again, the archives haven't
helped.

I'm using the Windows perf2mib and the snmp2ca toolkits to get SNMP
values without any trouble, but on some CPU-related MIBs I get "extra"
answers.  For example, in a snmpwalk on a snmp2ca host I get:

#snmpwalk -m ALL -v 1 -c community host .1.3.6.1.4.1.9600.1.1.5.1
...
SNMP2CA-STD::cpuInterruptsPerSec."0" = INTEGER: 67
SNMP2CA-STD::cpuInterruptsPerSec."_Total" = INTEGER: 66
...
#

The values for the two mibs are different.  In some cases, at some
points, the values differ by quite a bit.

Which value should I track to get the actual interrupts/second -- or
user time, or whatever?

And can anyone point me to a document where this "_Total" thingamajig
is described?

Thanks,
==ml

-- 
Michael Lucas		mwlucas at FreeBSD.org, mwlucas at BlackHelicopters.org
Today's chance of throwing it all away to start a goat farm: 41.8%
		http://www.BlackHelicopters.org/~mwlucas/
           Absolute OpenBSD:   http://www.AbsoluteOpenBSD.com/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Thu Jan 22 01:13:53 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Thu, 22 Jan 2004 00:13:53 -0000
Subject: [mrtg] Problem with bandwidth monitor
Message-ID: <200401220014.i0M0ENIs002268@knockout.kirtland.af.mil>


I'm wondering if anyone can tell me what I might be doing wrong here?  I'm
running MRTG on a Linux box trying to monitor 2 windows machines.  For some
reason, the first windows machine gives data but the other does not.  I also
have the SNMP services in windows setup exactly the same. Please let me know
if you see anything that I might be missing here.  Thanks!



###########################################################################

Target[ECLIPSE]: 1:public at 129.238.158.202:
SetEnv[ECLIPSE]: MRTG_INT_IP="10.10.10.10" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[ECLIPSE]: 12500000
#-#Total[ECLIPSE]: Summary of Traffic
Title[ECLIPSE]: Traffic Analysis for Eclipse
PageTop[ECLIPSE]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Backup Server</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.10 (application subnet)</TD></TR>
 </TABLE>

###########################################################################
 

Target[FILER2]: 1:public at 10.10.10.11:
SetEnv[FILER2]: MRTG_INT_IP="10.10.10.11" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[FILER2]: 12500000
#-#Total[FILER2]: Summary of Traffic
Title[FILER2]: Traffic Analysis for FILER2
PageTop[FILER2]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Range Server</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.11 (application subnet)</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From AWaltman at anacomp.com  Thu Jan 22 01:51:21 2004
From: AWaltman at anacomp.com (Waltman, Adam)
Date: Wed, 21 Jan 2004 16:51:21 -0800
Subject: [mrtg] Re: Problem with bandwidth monitor
Message-ID: <2828339DC948C644A03C1ECEAA0736D4155A5F@corpex1.anacomp.com>

The only thing I see that's different is the Target line.  The target for
Eclipse has a 129.238.158.202 address while it is looking at the 10 network
address.  Filer1's target line has the same 10 network address as the SetEnv
line.

Adam

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 7:14 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Problem with bandwidth monitor



I'm wondering if anyone can tell me what I might be doing wrong here?  I'm
running MRTG on a Linux box trying to monitor 2 windows machines.  For some
reason, the first windows machine gives data but the other does not.  I also
have the SNMP services in windows setup exactly the same. Please let me know
if you see anything that I might be missing here.  Thanks!



###########################################################################

Target[ECLIPSE]: 1:public at 129.238.158.202:
SetEnv[ECLIPSE]: MRTG_INT_IP="10.10.10.10" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[ECLIPSE]: 12500000
#-#Total[ECLIPSE]: Summary of Traffic
Title[ECLIPSE]: Traffic Analysis for Eclipse
PageTop[ECLIPSE]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Backup Server</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.10 (application subnet)</TD></TR>
 </TABLE>

###########################################################################
 

Target[FILER2]: 1:public at 10.10.10.11:
SetEnv[FILER2]: MRTG_INT_IP="10.10.10.11" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[FILER2]: 12500000
#-#Total[FILER2]: Summary of Traffic
Title[FILER2]: Traffic Analysis for FILER2
PageTop[FILER2]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Range Server</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.11 (application subnet)</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Thu Jan 22 01:54:38 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Thu, 22 Jan 2004 00:54:38 -0000
Subject: [mrtg] Re: Problem with bandwidth monitor
Message-ID: <200401220055.i0M0t8Is007296@knockout.kirtland.af.mil>

Yeah that was a mistake in my attempt to hide my ip range... I'm a slickster
I tell ya...

Anyway, I got the second computer to work for 10 minutes, but when I added
another  machine below it, it stopped again.  The first one is going strong
still though...


-----Original Message-----
From: Waltman, Adam [mailto:AWaltman at anacomp.com]
Sent: Wednesday, January 21, 2004 5:51 PM
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Problem with bandwidth monitor


The only thing I see that's different is the Target line.  The target for
Eclipse has a 129.238.158.202 address while it is looking at the 10 network
address.  Filer1's target line has the same 10 network address as the SetEnv
line.

Adam

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 7:14 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Problem with bandwidth monitor



I'm wondering if anyone can tell me what I might be doing wrong here?  I'm
running MRTG on a Linux box trying to monitor 2 windows machines.  For some
reason, the first windows machine gives data but the other does not.  I also
have the SNMP services in windows setup exactly the same. Please let me know
if you see anything that I might be missing here.  Thanks!



###########################################################################

Target[ECLIPSE]: 1:public at 129.238.158.202:
SetEnv[ECLIPSE]: MRTG_INT_IP="10.10.10.10" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[ECLIPSE]: 12500000
#-#Total[ECLIPSE]: Summary of Traffic
Title[ECLIPSE]: Traffic Analysis for Eclipse
PageTop[ECLIPSE]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Backup Server</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.10 (application subnet)</TD></TR>
 </TABLE>

###########################################################################
 

Target[FILER2]: 1:public at 10.10.10.11:
SetEnv[FILER2]: MRTG_INT_IP="10.10.10.11" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[FILER2]: 12500000
#-#Total[FILER2]: Summary of Traffic
Title[FILER2]: Traffic Analysis for FILER2
PageTop[FILER2]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Range Server</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.11 (application subnet)</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Thu Jan 22 02:03:12 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Thu, 22 Jan 2004 01:03:12 -0000
Subject: [mrtg] Re: Problem with bandwidth monitor
Message-ID: <200401220103.i0M13gIs008118@knockout.kirtland.af.mil>

Maybe this is it... what is the difference between:

1:public at 10.10.10.11:
MRTG_INT_IP="10.10.10.11

Should these IP's be the same or is the MRTG_INT_IP telling the target to go
somewhere with that data?

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 5:55 PM
To: Waltman, Adam; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Yeah that was a mistake in my attempt to hide my ip range... I'm a slickster
I tell ya...

Anyway, I got the second computer to work for 10 minutes, but when I added
another  machine below it, it stopped again.  The first one is going strong
still though...


-----Original Message-----
From: Waltman, Adam [mailto:AWaltman at anacomp.com]
Sent: Wednesday, January 21, 2004 5:51 PM
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Problem with bandwidth monitor


The only thing I see that's different is the Target line.  The target for
Eclipse has a 129.238.158.202 address while it is looking at the 10 network
address.  Filer1's target line has the same 10 network address as the SetEnv
line.

Adam

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 7:14 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Problem with bandwidth monitor



I'm wondering if anyone can tell me what I might be doing wrong here?  I'm
running MRTG on a Linux box trying to monitor 2 windows machines.  For some
reason, the first windows machine gives data but the other does not.  I also
have the SNMP services in windows setup exactly the same. Please let me know
if you see anything that I might be missing here.  Thanks!



###########################################################################

Target[ECLIPSE]: 1:public at 129.238.158.202:
SetEnv[ECLIPSE]: MRTG_INT_IP="10.10.10.10" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[ECLIPSE]: 12500000
#-#Total[ECLIPSE]: Summary of Traffic
Title[ECLIPSE]: Traffic Analysis for Eclipse
PageTop[ECLIPSE]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Backup Server</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.10 (application subnet)</TD></TR>
 </TABLE>

###########################################################################
 

Target[FILER2]: 1:public at 10.10.10.11:
SetEnv[FILER2]: MRTG_INT_IP="10.10.10.11" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[FILER2]: 12500000
#-#Total[FILER2]: Summary of Traffic
Title[FILER2]: Traffic Analysis for FILER2
PageTop[FILER2]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Range Server</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.11 (application subnet)</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Thu Jan 22 06:16:37 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Thu, 22 Jan 2004 05:16:37 -0000
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor
Message-ID: <200401220517.i0M5H6Is027490@knockout.kirtland.af.mil>

Okay, I've tried several things here.  

I've separated the services I'm wanting to monitor to other files and that
didn't work.  I've re-arranged things in each file to no avail.  I'm almost
positive that the Linux box is reading the SNMP from the windows machines
because it's reading the "Up Time" correctly.  When I restart the SNMP
Service on the windows machine, the "Up Time" resets to zero.  

What could I be doing wrong?  I have one machine working perfectly and 4
that are not with the traffic monitor.  Oh, another thing I tried was
setting up a probe to monitor TCP connections to each machine, and they all
work!  Someone help before I go postal... ;) 

Mike

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 6:03 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Maybe this is it... what is the difference between:

1:public at 10.10.10.11:
MRTG_INT_IP="10.10.10.11

Should these IP's be the same or is the MRTG_INT_IP telling the target to go
somewhere with that data?

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 5:55 PM
To: Waltman, Adam; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Yeah that was a mistake in my attempt to hide my ip range... I'm a slickster
I tell ya...

Anyway, I got the second computer to work for 10 minutes, but when I added
another  machine below it, it stopped again.  The first one is going strong
still though...


-----Original Message-----
From: Waltman, Adam [mailto:AWaltman at anacomp.com]
Sent: Wednesday, January 21, 2004 5:51 PM
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Problem with bandwidth monitor


The only thing I see that's different is the Target line.  The target for
Eclipse has a 129.238.158.202 address while it is looking at the 10 network
address.  Filer1's target line has the same 10 network address as the SetEnv
line.

Adam

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 7:14 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Problem with bandwidth monitor



I'm wondering if anyone can tell me what I might be doing wrong here?  I'm
running MRTG on a Linux box trying to monitor 2 windows machines.  For some
reason, the first windows machine gives data but the other does not.  I also
have the SNMP services in windows setup exactly the same. Please let me know
if you see anything that I might be missing here.  Thanks!



###########################################################################

Target[ECLIPSE]: 1:public at 129.238.158.202:
SetEnv[ECLIPSE]: MRTG_INT_IP="10.10.10.10" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[ECLIPSE]: 12500000
#-#Total[ECLIPSE]: Summary of Traffic
Title[ECLIPSE]: Traffic Analysis for Eclipse
PageTop[ECLIPSE]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Backup Server</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.10 (application subnet)</TD></TR>
 </TABLE>

###########################################################################
 

Target[FILER2]: 1:public at 10.10.10.11:
SetEnv[FILER2]: MRTG_INT_IP="10.10.10.11" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[FILER2]: 12500000
#-#Total[FILER2]: Summary of Traffic
Title[FILER2]: Traffic Analysis for FILER2
PageTop[FILER2]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Range Server</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.11 (application subnet)</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From abhishek_patidar at rediffmail.com  Thu Jan 22 10:58:14 2004
From: abhishek_patidar at rediffmail.com (Abhishek  Patidar)
Date: 22 Jan 2004 09:58:14 -0000
Subject: [mrtg] Netscreen Firewall Policy
Message-ID: <20040122095814.22823.qmail@webmail30.rediffmail.com>

An embedded and charset-unspecified text was scrubbed...
Name: not available
Url: https://lists.oetiker.ch/pipermail/mrtg/attachments/20040122/a5f5030a/attachment.asc 

From brandon.baker at inforonics.com  Thu Jan 22 13:41:47 2004
From: brandon.baker at inforonics.com (brandon.baker)
Date: Thu, 22 Jan 2004 07:41:47 -0500
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor
Message-ID: <33B899FC85A1D31194F700508B0EF40F0DA5056A@nsinf03.inforonics.net>

Mike,

What shows up in your log file for the systems that don't work.  If no log
file is created, then what is the error that you get when you run mrtg
against the config file?


Brandon

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Thursday, January 22, 2004 12:17 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Okay, I've tried several things here.  

I've separated the services I'm wanting to monitor to other files and that
didn't work.  I've re-arranged things in each file to no avail.  I'm almost
positive that the Linux box is reading the SNMP from the windows machines
because it's reading the "Up Time" correctly.  When I restart the SNMP
Service on the windows machine, the "Up Time" resets to zero.  

What could I be doing wrong?  I have one machine working perfectly and 4
that are not with the traffic monitor.  Oh, another thing I tried was
setting up a probe to monitor TCP connections to each machine, and they all
work!  Someone help before I go postal... ;) 

Mike

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 6:03 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Maybe this is it... what is the difference between:

1:public at 10.10.10.11:
MRTG_INT_IP="10.10.10.11

Should these IP's be the same or is the MRTG_INT_IP telling the target to go
somewhere with that data?

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 5:55 PM
To: Waltman, Adam; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Yeah that was a mistake in my attempt to hide my ip range... I'm a slickster
I tell ya...

Anyway, I got the second computer to work for 10 minutes, but when I added
another  machine below it, it stopped again.  The first one is going strong
still though...


-----Original Message-----
From: Waltman, Adam [mailto:AWaltman at anacomp.com]
Sent: Wednesday, January 21, 2004 5:51 PM
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Problem with bandwidth monitor


The only thing I see that's different is the Target line.  The target for
Eclipse has a 129.238.158.202 address while it is looking at the 10 network
address.  Filer1's target line has the same 10 network address as the SetEnv
line.

Adam

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 7:14 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Problem with bandwidth monitor



I'm wondering if anyone can tell me what I might be doing wrong here?  I'm
running MRTG on a Linux box trying to monitor 2 windows machines.  For some
reason, the first windows machine gives data but the other does not.  I also
have the SNMP services in windows setup exactly the same. Please let me know
if you see anything that I might be missing here.  Thanks!



###########################################################################

Target[ECLIPSE]: 1:public at 129.238.158.202:
SetEnv[ECLIPSE]: MRTG_INT_IP="10.10.10.10" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[ECLIPSE]: 12500000
#-#Total[ECLIPSE]: Summary of Traffic
Title[ECLIPSE]: Traffic Analysis for Eclipse
PageTop[ECLIPSE]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Backup Server</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.10 (application subnet)</TD></TR>
 </TABLE>

###########################################################################
 

Target[FILER2]: 1:public at 10.10.10.11:
SetEnv[FILER2]: MRTG_INT_IP="10.10.10.11" MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[FILER2]: 12500000
#-#Total[FILER2]: Summary of Traffic
Title[FILER2]: Traffic Analysis for FILER2
PageTop[FILER2]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Range Server</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.11 (application subnet)</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Thu Jan 22 17:52:03 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Thu, 22 Jan 2004 16:52:03 -0000
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor
Message-ID: <200401221652.i0MGqYIs028168@knockout.kirtland.af.mil>

Bradon,

The log file has only zeros in it.  The numbers are spaced apart like a
normal log file, but it's like there is no data.  I also don't see any
errors in the mrtg log file.  The strange thing is that it started working
for a brief while as I was messing with the cfg, but when I added new
machines to the file, its stopped working again.

Am I possibly missing something on the windows machines?  I can't wait to
figure this out... Thanks!

Mike

-----Original Message-----
From: brandon.baker
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Sent: 1/22/2004 5:41 AM
Subject: RE: [mrtg] Re: [mart] Re: Problem with bandwidth monitor

Mike,

What shows up in your log file for the systems that don't work.  If no
log
file is created, then what is the error that you get when you run mrtg
against the config file?


Brandon

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Thursday, January 22, 2004 12:17 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Okay, I've tried several things here.  

I've separated the services I'm wanting to monitor to other files and
that
didn't work.  I've re-arranged things in each file to no avail.  I'm
almost
positive that the Linux box is reading the SNMP from the windows
machines
because it's reading the "Up Time" correctly.  When I restart the SNMP
Service on the windows machine, the "Up Time" resets to zero.  

What could I be doing wrong?  I have one machine working perfectly and 4
that are not with the traffic monitor.  Oh, another thing I tried was
setting up a probe to monitor TCP connections to each machine, and they
all
work!  Someone help before I go postal... ;) 

Mike

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 6:03 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Maybe this is it... what is the difference between:

1:public at 10.10.10.11:
MRTG_INT_IP="10.10.10.11

Should these IP's be the same or is the MRTG_INT_IP telling the target
to go
somewhere with that data?

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 5:55 PM
To: Waltman, Adam; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Yeah that was a mistake in my attempt to hide my ip range... I'm a
slickster
I tell ya...

Anyway, I got the second computer to work for 10 minutes, but when I
added
another  machine below it, it stopped again.  The first one is going
strong
still though...


-----Original Message-----
From: Waltman, Adam [mailto:AWaltman at anacomp.com]
Sent: Wednesday, January 21, 2004 5:51 PM
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Problem with bandwidth monitor


The only thing I see that's different is the Target line.  The target
for
Eclipse has a 129.238.158.202 address while it is looking at the 10
network
address.  Filer1's target line has the same 10 network address as the
SetEnv
line.

Adam

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 7:14 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Problem with bandwidth monitor



I'm wondering if anyone can tell me what I might be doing wrong here?
I'm
running MRTG on a Linux box trying to monitor 2 windows machines.  For
some
reason, the first windows machine gives data but the other does not.  I
also
have the SNMP services in windows setup exactly the same. Please let me
know
if you see anything that I might be missing here.  Thanks!



########################################################################
###

Target[ECLIPSE]: 1:public at 129.238.158.202:
SetEnv[ECLIPSE]: MRTG_INT_IP="10.10.10.10"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[ECLIPSE]: 12500000
#-#Total[ECLIPSE]: Summary of Traffic
Title[ECLIPSE]: Traffic Analysis for Eclipse
PageTop[ECLIPSE]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Backup Server</TD></TR>
   <TR><TD>Maintainer:</TD>
<TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.10 (application
subnet)</TD></TR>
 </TABLE>

########################################################################
###
 

Target[FILER2]: 1:public at 10.10.10.11:
SetEnv[FILER2]: MRTG_INT_IP="10.10.10.11"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[FILER2]: 12500000
#-#Total[FILER2]: Summary of Traffic
Title[FILER2]: Traffic Analysis for FILER2
PageTop[FILER2]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Range Server</TD></TR>
   <TR><TD>Maintainer:</TD>
<TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.11 (application
subnet)</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From evans.mj.1 at pg.com  Thu Jan 22 20:34:38 2004
From: evans.mj.1 at pg.com (evans.mj.1 at pg.com)
Date: Thu, 22 Jan 2004 14:34:38 -0500
Subject: [mrtg] Passing Ping options while using mrtg-ping-probe
Message-ID: <OF3BE44C2E.43815138-ON05256E23.006AC525-85256E23.006B8A52@na.pg.com>

Can anyone tell me how to pass options to the ping command while using 
mrtg-ping-probe?  I looked through the script and wasn't sure if I should 
enter the option I wanna use in the script or if it should be passed in 
the cfg file.  I am trying to limit the timeout between each ping so that 
mrtg will complete it's one minute interval when there is an unresponsive 
host.  Right now, when I try to ping a downed host, MRTG gets held up 
waiting for the ping-probe to complete and it doesn't complete in the 
interval. 
Thanks for any assistance,
Mike

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From pwo at Infineon.COM  Thu Jan 22 21:06:32 2004
From: pwo at Infineon.COM (Peter W. Osel)
Date: Thu, 22 Jan 2004 12:06:32 -0800
Subject: [mrtg] Re: Passing Ping options while using mrtg-ping-probe
In-Reply-To: <OF3BE44C2E.43815138-ON05256E23.006AC525-85256E23.006B8A52@na.pg.com>
References: <OF3BE44C2E.43815138-ON05256E23.006AC525-85256E23.006B8A52@na.pg.com>
Message-ID: <20040122200632.GC7470@w042.SJC.Infineon.COM>

> *** evans.mj.1 at pg.com <evans.mj.1 at pg.com>
> *** [2004-01-22 11:58:14]:
> Can anyone tell me how to pass options to the ping command while using 
> mrtg-ping-probe?

Mike,
you can use mrt-ping-probes's option '-o' to pass options to the ping
program.

     -o ping_options
             Pass ping_options to the ping program.  You can use
             this generic option to e.g. pass an option to ping
             to suppress displaying addresses as host names.
             This helps to prevent the ping to fail because it
             cannot map hostnames to IP addresses and vice versa.
             To pass several arguments, enclose the options in
             quotes.  Check the documentation of your ping
             program for possible options.

for example,

     mrtg-ping-probe -o -n ricochet.pwo.de
         Suppress displaying addresses as host names on Solaris 2
         (to protect from DNS problems causing the ping to fail)
         by passing option -n to the ping program.

         Note that in this example `-n' is not an option for
         mrtg-ping-probe, but gets passed to the ping program.


option -o is supported since release 1.9.0 of mrtg-ping-probe,
released 1999-01-01

The latest version can always be found at
http://intra-dc.sjc.infineon.com/~pwo/projects/mrtg/
ftp://ftp.pwo.de/pub/pwo/mrtg/mrtg-ping-probe/


Hipe this helps

	--pwo


--
Peter W. Osel                   Principal - Development Systems
Infineon Technologies           Email: pwo at Infineon.COM
North America Corp.             Phone: +1 (408) 501 6321
1730 North First Street         Fax:   +1 (408) 501 2410
San Jose, CA 95112, USA         WWW:   http://pwo.de/

pgp key fingerprint = 79 2D DD 49 C0 AA D8 CF  2C F9 A5 6A BA 37 0E 28

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From s.shipway at auckland.ac.nz  Thu Jan 22 22:18:47 2004
From: s.shipway at auckland.ac.nz (Steve Shipway)
Date: Fri, 23 Jan 2004 10:18:47 +1300
Subject: [mrtg] Re: Netscreen Firewall Policy
In-Reply-To: <20040122095814.22823.qmail@webmail30.rediffmail.com>
Message-ID: <0ab501c3e12d$52c55d70$b004d882@itss.auckland.ac.nz>

>Queries:
>1. I want MRTG to display the exact values that are in the log 
>file like "7876"
>2. I do NOT want it to be displayed as B/s or kB/s. Currently it 
>displays as kB/s. MRTG Should display "BYTES/Min" in the HTML 
>Page.
>
>How can I achieve this ?
If you are using routers2.cgi for your frontend, then you can use the option

    routers.cgi*Options[targetname]: fixunit integer
to remove the k prefix and the decimal places.
Then, set the ShortLegend to change the 'B/s' to whatever you prefer.

Steve

---
Steve Shipway: ITSS, University of Auckland
Email: s.shipway at auckland.ac.nz  Web: http://www.steveshipway.org/  
** We can only discover new oceans when we have the **
** courage to lose sight of the shore.              **

-- Attached file removed by Ecartis and put at URL below --
-- Type: text/x-vcard
-- Size: 155 bytes
-- URL : http://www.ee.ethz.ch/~slist/p/10-Steve%20Shipway.vcf


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From yamtak at b-session.com  Thu Jan 22 22:22:55 2004
From: yamtak at b-session.com (Takumi Yamane)
Date: Fri, 23 Jan 2004 06:22:55 +0900
Subject: [mrtg] Re: Passing Ping options while using mrtg-ping-probe
In-Reply-To: <OF3BE44C2E.43815138-ON05256E23.006AC525-85256E23.006B8A52@na.pg.com>
References: <OF3BE44C2E.43815138-ON05256E23.006AC525-85256E23.006B8A52@na.pg.com>
Message-ID: <20040122212305.740F3D975B@ntardis.ee.ethz.ch>

Hi,

On Thu, 22 Jan 2004 14:34:38 -0500, evans.mj.1 at pg.com wrote 
in <OF3BE44C2E.43815138-ON05256E23.006AC525-85256E23.006B8A52 at na.pg.
com>:
> Can anyone tell me how to pass options to the ping command while 
> using mrtg-ping-probe? 
...
> I am trying to limit the timeout between each ping so that 

The script accepts "-t" option as timeout value.

A line from my working config file is like this:
  Target[ping-target]: `mrtg-ping-probe -k 3 -t 10 -s target`

But I'm not sure if it's really working, since the script sometimes
hungs up forever and requires force termination :)
# I'm currently using v2.3 of the script with a *little* modification,
# it didn't work correctly on my Linux box.

--
Takumi Yamane <yamtak at b-session.com>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From vk2ydh at hotmail.com  Thu Jan 22 23:00:48 2004
From: vk2ydh at hotmail.com (vk2ydh)
Date: Fri, 23 Jan 2004 09:00:48 +1100
Subject: [mrtg] Re: Passing Ping options while using mrtg-ping-probe
References: <OF3BE44C2E.43815138-ON05256E23.006AC525-85256E23.006B8A52@na.pg.com> <20040122212305.740F3D975B@ntardis.ee.ethz.ch>
Message-ID: <Law10-OE27PSREBtbot000383b3@hotmail.com>

I found I needed to pass the -w 10 option to the linux pinger to stop the
occasional ping hang. Check the ping man page for more details.


Dave

----- Original Message ----- 
From: "Takumi Yamane" <yamtak at b-session.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Friday, January 23, 2004 8:22 AM
Subject: [mrtg] Re: Passing Ping options while using mrtg-ping-probe


> Hi,
>
> On Thu, 22 Jan 2004 14:34:38 -0500, evans.mj.1 at pg.com wrote
> in <OF3BE44C2E.43815138-ON05256E23.006AC525-85256E23.006B8A52 at na.pg.
> com>:
> > Can anyone tell me how to pass options to the ping command while
> > using mrtg-ping-probe?
> ...
> > I am trying to limit the timeout between each ping so that
>
> The script accepts "-t" option as timeout value.
>
> A line from my working config file is like this:
>   Target[ping-target]: `mrtg-ping-probe -k 3 -t 10 -s target`
>
> But I'm not sure if it's really working, since the script sometimes
> hungs up forever and requires force termination :)
> # I'm currently using v2.3 of the script with a *little* modification,
> # it didn't work correctly on my Linux box.
>
> --
> Takumi Yamane <yamtak at b-session.com>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Francis.McPhail at blueapache.com  Fri Jan 23 02:53:52 2004
From: Francis.McPhail at blueapache.com (Francis McPhail)
Date: Fri, 23 Jan 2004 12:53:52 +1100
Subject: [mrtg] Graph for a specified time period
Message-ID: <577F6355523DC04CA793464070E07DE52649B2@melserv-01.blueapache.com.au>

Hi I've search through the archives and counldn't find anything so if
I've missed something I do apologised.
 
I monitor a number of cisco devices with mrtg, and once a month I take
the monthly summary graph (usually at 11:59pm on the night of the end of
the month.) for a monthyl status report.
 
Last month I was unable to take this graph, due to a cron problem. Is
there anyway I can roll back, or have the graph displayed/generated as
it would have look at 11:59PM 31/12/2003?
 
Cheers,
Francis.
 
  _____  
Francis McPhail

Phone:

1300 13 55 48

Technical Services Manager

Fax:

1300 13 55 49

 

 

 

Blue Apache Pty Ltd

Direct:

03 8696 9305

Melbourne - Sydney

Mobile: 

0414 43 27 30

 

 

 

www.blueapache.com

Email:

francis.mcphail at blueapache.com

  _____  

 

***********************************************************
It is confidential to the addressee and may contain certain copyright and/or legally privileged infomration.  No-one else other than, on behalf of the addressee, may read, print, store, copy, forward or act in reliance on all or any part of it or its attachments.  You must scan this email and any attached files for viruses.  We accept no liability for any loss, damage or consequence resulting either directly or indirectly from the use of attached files. 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From david.morrow at autodata.net  Fri Jan 23 03:16:31 2004
From: david.morrow at autodata.net (Dave Morrow)
Date: Thu, 22 Jan 2004 21:16:31 -0500
Subject: [mrtg] Cisco Localdirector
Message-ID: <9759E62CD3776D47878234547DAEAC9E03465DD1@ascexchange.local.autodata.net>

Hi, all.  I have, off and on been playing with getting a Cisco Localdirector
MRTG Configuration working.  I finally had some success so I thought I would
share it with anyone who might also be looking for such a config.

# Connections per minute

Target[ld-virt1-conn]:
1.3.6.1.4.1.9.9.99.1.1.3.1.7.AAA.BBB.CCC.DDD.PPP.0.6.0.0.0.0.0.0.0.0&1.3.6.1
.4.1.9.9.99.1.1.3.1.7.AAA.BBB.CCC.DDD.PPP.0.6.0.0.0.0.0.0.0.0:public at LLL.MMM
.NNN.OOO:::::2
WithPeak[ld-virt1-conn]: ymw
Unscaled[ld-virt1-conn]: dwmy
MaxBytes[ld-virt1-conn]: 1000
YLegend[ld-virt1-conn]: Connections
ShortLegend[ld-virt1-conn]: con/min
LegendI[ld-virt1-conn]: In Use:
LegendO[ld-virt1-conn]:
Options[ld-virt1-conn]: noo, growright, nopercent, nolegend, perminute
Title[ld-virt1-conn]: VW Connections
PageTop[ld-virt1-conn]: <H1>Virtual IP AAA.BBB.CCC.DDD Connections</H1>

# Bandwidth

Target[ld-virt1-bandwidth]:
1.3.6.1.4.1.9.9.99.1.1.3.1.9.AAA.BBB.CCC.DDD.PPP.0.6.0.0.0.0.0.0.0.0&1.3.6.1
.4.1.9.9.99.1.1.3.1.9.AAA.BBB.CCC.DDD.PPP.0.6.0.0.0.0.0.0.0.0:public at LLL.MMM
.NNN.OOO:::::2
Options[ld-virt1-bandwidth]: gauge, nopercent, avgpeak
MaxBytes[ld-virt1-bandwidth]: 1250000
Title[ld-virt1-bandwidth]: Virtual1 Bandwidth
PageTop[ld-virt1-bandwidth]: <H1>Virtual 1 AAA.BBB.CCC.DDD.PPP
Bandwidth</H1>


David Morrow
Systems Technical Lead, IT Operations
Autodata Solutions Company
david.morrow at autodata.net
P: (519) 451-2323


This message has originated from Autodata Solutions.  The attached material
is the Confidential and Proprietary Information of Autodata Solutions. This
email and any files transmitted with it are confidential and intended solely
for the use of the individual or entity to whom they are addressed. If you
have received this email in error please delete this message and notify the
Autodata system administrator at  Administrator at autodata.net
<mailto:Administrator at autodata.net> 



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Steve.Dowling at tafensw.edu.au  Fri Jan 23 03:44:01 2004
From: Steve.Dowling at tafensw.edu.au (Dowling, Steve)
Date: Fri, 23 Jan 2004 13:44:01 +1100
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor
Message-ID: <1DBEF093251ED749B7E5583137F479F604BF9420@umfexch1.ultimo.tafensw.edu.au>

Mike,

Ah ha!  Zeros in the log file!  This smells like a crook response from
your Windows machine.  
You must work out what your Windows machine is giving you in response to
your snmp query.

Try another snmp mib browser, I get very good results with GETIF 
(http://www.wtcs.org/snmp4tpc/getif.htm).  This will hep you separate
the snmp problems, 
from the Windows problems, from the mrtg problems ... 

Steve Dowling

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil] 
Sent: Friday, 23 January 2004 3:52 AM
To: 'brandon.baker '; Johnston Michael J Contr AFRL/DES;
'mrtg at list.ee.ethz.ch '
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Bradon,

The log file has only zeros in it.  The numbers are spaced apart like a
normal log file, but it's like there is no data.  I also don't see any
errors in the mrtg log file.  The strange thing is that it started
working for a brief while as I was messing with the cfg, but when I
added new machines to the file, its stopped working again.

Am I possibly missing something on the windows machines?  I can't wait
to figure this out... Thanks!

Mike

-----Original Message-----
From: brandon.baker
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Sent: 1/22/2004 5:41 AM
Subject: RE: [mrtg] Re: [mart] Re: Problem with bandwidth monitor

Mike,

What shows up in your log file for the systems that don't work.  If no
log file is created, then what is the error that you get when you run
mrtg against the config file?


Brandon

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Thursday, January 22, 2004 12:17 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Okay, I've tried several things here.  

I've separated the services I'm wanting to monitor to other files and
that didn't work.  I've re-arranged things in each file to no avail.
I'm almost positive that the Linux box is reading the SNMP from the
windows machines because it's reading the "Up Time" correctly.  When I
restart the SNMP Service on the windows machine, the "Up Time" resets to
zero.  

What could I be doing wrong?  I have one machine working perfectly and 4
that are not with the traffic monitor.  Oh, another thing I tried was
setting up a probe to monitor TCP connections to each machine, and they
all work!  Someone help before I go postal... ;) 

Mike

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 6:03 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Maybe this is it... what is the difference between:

1:public at 10.10.10.11:
MRTG_INT_IP="10.10.10.11

Should these IP's be the same or is the MRTG_INT_IP telling the target
to go somewhere with that data?

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 5:55 PM
To: Waltman, Adam; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Yeah that was a mistake in my attempt to hide my ip range... I'm a
slickster I tell ya...

Anyway, I got the second computer to work for 10 minutes, but when I
added another  machine below it, it stopped again.  The first one is
going strong still though...


-----Original Message-----
From: Waltman, Adam [mailto:AWaltman at anacomp.com]
Sent: Wednesday, January 21, 2004 5:51 PM
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Problem with bandwidth monitor


The only thing I see that's different is the Target line.  The target
for Eclipse has a 129.238.158.202 address while it is looking at the 10
network address.  Filer1's target line has the same 10 network address
as the SetEnv line.

Adam

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 7:14 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Problem with bandwidth monitor



I'm wondering if anyone can tell me what I might be doing wrong here?
I'm running MRTG on a Linux box trying to monitor 2 windows machines.
For some reason, the first windows machine gives data but the other does
not.  I also have the SNMP services in windows setup exactly the same.
Please let me know if you see anything that I might be missing here.
Thanks!



########################################################################
###

Target[ECLIPSE]: 1:public at 129.238.158.202:
SetEnv[ECLIPSE]: MRTG_INT_IP="10.10.10.10"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[ECLIPSE]: 12500000
#-#Total[ECLIPSE]: Summary of Traffic
Title[ECLIPSE]: Traffic Analysis for Eclipse
PageTop[ECLIPSE]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Backup Server</TD></TR>
   <TR><TD>Maintainer:</TD>
<TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.10 (application
subnet)</TD></TR>
 </TABLE>

########################################################################
###
 

Target[FILER2]: 1:public at 10.10.10.11:
SetEnv[FILER2]: MRTG_INT_IP="10.10.10.11"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[FILER2]: 12500000
#-#Total[FILER2]: Summary of Traffic
Title[FILER2]: Traffic Analysis for FILER2
PageTop[FILER2]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Range Server</TD></TR>
   <TR><TD>Maintainer:</TD>
<TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.11 (application
subnet)</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

**********************************************************************
This message is intended for the addressee named and may contain
privileged information or confidential information or both. If you
are not the intended recipient please delete it and notify the sender.
**********************************************************************

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From s.shipway at auckland.ac.nz  Fri Jan 23 04:01:36 2004
From: s.shipway at auckland.ac.nz (Steve Shipway)
Date: Fri, 23 Jan 2004 16:01:36 +1300
Subject: [mrtg] Re: Graph for a specified time period
In-Reply-To: <577F6355523DC04CA793464070E07DE52649B2@melserv-01.blueapache.com.au>
Message-ID: <0b7a01c3e15d$37079dc0$b004d882@itss.auckland.ac.nz>

>Last month I was unable to take this graph, due to a cron 
>problem. Is there anyway I can roll back, or have the graph 
>displayed/generated as it would have look at 11:59PM 31/12/2003?
Not unless you have archived a copy of the .rrd file on that time.  The
nature of the .rrd file is to expire the old data as it goes, so unless you
have a nightly backup that saved a copy of the file, its gone.

If you do have a copy of the .rrd from around this date, then you should be
able to create a graph from it, although you will have to tell the graph
generator to base the graph at 'last update' time rather than 'now'.

Your current graph should have most of the data from this date, only the
last 20-odd days would have dropped off of the end.

If you are using the routers.cgi frontend with the rrd-archive add-on then
you will be able to pull back the graphs for any day. (I do seem to be
plugging this rather frequently recently :)

Steve

---
Steve Shipway: ITSS, University of Auckland
Email: s.shipway at auckland.ac.nz  Web: http://www.steveshipway.org/  
** We can only discover new oceans when we have the **
** courage to lose sight of the shore.              **


-- Attached file removed by Ecartis and put at URL below --
-- Type: text/x-vcard
-- Size: 155 bytes
-- URL : http://www.ee.ethz.ch/~slist/p/11-Steve%20Shipway.vcf


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From lists2 at fadedforce.com  Fri Jan 23 06:32:10 2004
From: lists2 at fadedforce.com (michael t. anderson)
Date: Thu, 22 Jan 2004 21:32:10 -0800
Subject: [mrtg] Negative counters
Message-ID: <200401222132171.SM01944@mothergreen>

Hello,

I'm using MRTG to gather data via a script that calls MS WMI to get values
from windows servers, then puts them into rrdtool, then graphs with
14all.cgi.

I am monitoring performance values, and they are displayed as a 32 bit
integer. Unfortunately, some of the counters I am watching have overflowed
and now are displaying negative numbers. They are incrementing positively
(e.g. value 1: -2031329828, value 2: -2031345680 difference: 15852) however
mrtg/rrd seems to be stuck graphing values around 1.4 million (correct
values should be around 10000). 

I'm not sure why it is doing this but I think it must have something to do
with the counter overflowing and starting back at -4294967295 or so. 

I am using MRTG 2.9.12a and rrdtool 1.0.37.

Please let me know if you there is a way to fix this. 

Thank you.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Fri Jan 23 16:18:16 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Fri, 23 Jan 2004 15:18:16 -0000
Subject: [mrtg] [mart] Re: Problem with bandwidth monitor
Message-ID: <200401231528.i0NFSrIs008613@knockout.kirtland.af.mil>

Thanks for the response!  I'm going to read though and see if I can figure
out exactly what I'm doing wrong with the SNMP on windows. =) 

Do you think that this method monitoring network traffic is that best or
should I be looking at another way?  Thanks again!

Mike Johnston

-----Original Message-----
From: Dowling, Steve [mailto:Steve.Dowling at tafensw.edu.au]
Sent: Thursday, January 22, 2004 7:44 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Mike,

Ah ha!  Zeros in the log file!  This smells like a crook response from
your Windows machine.  
You must work out what your Windows machine is giving you in response to
your snmp query.

Try another snmp mib browser, I get very good results with GETIF 
(http://www.wtcs.org/snmp4tpc/getif.htm).  This will hep you separate
the snmp problems, 
from the Windows problems, from the mrtg problems ... 

Steve Dowling

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil] 
Sent: Friday, 23 January 2004 3:52 AM
To: 'brandon.baker '; Johnston Michael J Contr AFRL/DES;
'mrtg at list.ee.ethz.ch '
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Bradon,

The log file has only zeros in it.  The numbers are spaced apart like a
normal log file, but it's like there is no data.  I also don't see any
errors in the mrtg log file.  The strange thing is that it started
working for a brief while as I was messing with the cfg, but when I
added new machines to the file, its stopped working again.

Am I possibly missing something on the windows machines?  I can't wait
to figure this out... Thanks!

Mike

-----Original Message-----
From: brandon.baker
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Sent: 1/22/2004 5:41 AM
Subject: RE: [mrtg] Re: [mart] Re: Problem with bandwidth monitor

Mike,

What shows up in your log file for the systems that don't work.  If no
log file is created, then what is the error that you get when you run
mrtg against the config file?


Brandon

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Thursday, January 22, 2004 12:17 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Okay, I've tried several things here.  

I've separated the services I'm wanting to monitor to other files and
that didn't work.  I've re-arranged things in each file to no avail.
I'm almost positive that the Linux box is reading the SNMP from the
windows machines because it's reading the "Up Time" correctly.  When I
restart the SNMP Service on the windows machine, the "Up Time" resets to
zero.  

What could I be doing wrong?  I have one machine working perfectly and 4
that are not with the traffic monitor.  Oh, another thing I tried was
setting up a probe to monitor TCP connections to each machine, and they
all work!  Someone help before I go postal... ;) 

Mike

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 6:03 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Maybe this is it... what is the difference between:

1:public at 10.10.10.11:
MRTG_INT_IP="10.10.10.11

Should these IP's be the same or is the MRTG_INT_IP telling the target
to go somewhere with that data?

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 5:55 PM
To: Waltman, Adam; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Yeah that was a mistake in my attempt to hide my ip range... I'm a
slickster I tell ya...

Anyway, I got the second computer to work for 10 minutes, but when I
added another  machine below it, it stopped again.  The first one is
going strong still though...


-----Original Message-----
From: Waltman, Adam [mailto:AWaltman at anacomp.com]
Sent: Wednesday, January 21, 2004 5:51 PM
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Problem with bandwidth monitor


The only thing I see that's different is the Target line.  The target
for Eclipse has a 129.238.158.202 address while it is looking at the 10
network address.  Filer1's target line has the same 10 network address
as the SetEnv line.

Adam

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 7:14 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Problem with bandwidth monitor



I'm wondering if anyone can tell me what I might be doing wrong here?
I'm running MRTG on a Linux box trying to monitor 2 windows machines.
For some reason, the first windows machine gives data but the other does
not.  I also have the SNMP services in windows setup exactly the same.
Please let me know if you see anything that I might be missing here.
Thanks!



########################################################################
###

Target[ECLIPSE]: 1:public at 129.238.158.202:
SetEnv[ECLIPSE]: MRTG_INT_IP="10.10.10.10"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[ECLIPSE]: 12500000
#-#Total[ECLIPSE]: Summary of Traffic
Title[ECLIPSE]: Traffic Analysis for Eclipse
PageTop[ECLIPSE]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Backup Server</TD></TR>
   <TR><TD>Maintainer:</TD>
<TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.10 (application
subnet)</TD></TR>
 </TABLE>

########################################################################
###
 

Target[FILER2]: 1:public at 10.10.10.11:
SetEnv[FILER2]: MRTG_INT_IP="10.10.10.11"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[FILER2]: 12500000
#-#Total[FILER2]: Summary of Traffic
Title[FILER2]: Traffic Analysis for FILER2
PageTop[FILER2]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Range Server</TD></TR>
   <TR><TD>Maintainer:</TD>
<TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.11 (application
subnet)</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

**********************************************************************
This message is intended for the addressee named and may contain
privileged information or confidential information or both. If you
are not the intended recipient please delete it and notify the sender.
**********************************************************************

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From William.Owen at ProfilesInternational.com  Fri Jan 23 17:33:35 2004
From: William.Owen at ProfilesInternational.com (William Owen)
Date: Fri, 23 Jan 2004 10:33:35 -0600
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor
Message-ID: <B1614B3FC265554DADE169EE8146665E018B87F5@piexchange1.piicorp.org>

I had some issues early on monitoring windows boxes with SNMP and opted to
use WMI scripting to handle the job as apposed to SNMP.  Any value that you
can pull using WMI scripting can be graphed using MRTG.

Target[Example]: 'cscript //Nologo YourScript.vbs'

MRGT does a great job of graphing in this configuration.  Just remember that
your scripts need to feed it 4 bits of info:
Data I
Data O
Sys description
Sys uptime

If you only monitoring one thing (such as free memory or CPU usage) you can
output the value twice for Data I and Data O and use the noi or noo to
remove the redundant reading during graphing.

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil] 
Sent: Friday, January 23, 2004 9:18 AM
To: Dowling, Steve; mrtg at list.ee.ethz.ch
Subject: [mrtg] [mart] Re: Problem with bandwidth monitor

Thanks for the response!  I'm going to read though and see if I can figure
out exactly what I'm doing wrong with the SNMP on windows. =) 

Do you think that this method monitoring network traffic is that best or
should I be looking at another way?  Thanks again!

Mike Johnston

-----Original Message-----
From: Dowling, Steve [mailto:Steve.Dowling at tafensw.edu.au]
Sent: Thursday, January 22, 2004 7:44 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Mike,

Ah ha!  Zeros in the log file!  This smells like a crook response from
your Windows machine.  
You must work out what your Windows machine is giving you in response to
your snmp query.

Try another snmp mib browser, I get very good results with GETIF 
(http://www.wtcs.org/snmp4tpc/getif.htm).  This will hep you separate
the snmp problems, 
from the Windows problems, from the mrtg problems ... 

Steve Dowling

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil] 
Sent: Friday, 23 January 2004 3:52 AM
To: 'brandon.baker '; Johnston Michael J Contr AFRL/DES;
'mrtg at list.ee.ethz.ch '
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Bradon,

The log file has only zeros in it.  The numbers are spaced apart like a
normal log file, but it's like there is no data.  I also don't see any
errors in the mrtg log file.  The strange thing is that it started
working for a brief while as I was messing with the cfg, but when I
added new machines to the file, its stopped working again.

Am I possibly missing something on the windows machines?  I can't wait
to figure this out... Thanks!

Mike

-----Original Message-----
From: brandon.baker
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Sent: 1/22/2004 5:41 AM
Subject: RE: [mrtg] Re: [mart] Re: Problem with bandwidth monitor

Mike,

What shows up in your log file for the systems that don't work.  If no
log file is created, then what is the error that you get when you run
mrtg against the config file?


Brandon

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Thursday, January 22, 2004 12:17 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Okay, I've tried several things here.  

I've separated the services I'm wanting to monitor to other files and
that didn't work.  I've re-arranged things in each file to no avail.
I'm almost positive that the Linux box is reading the SNMP from the
windows machines because it's reading the "Up Time" correctly.  When I
restart the SNMP Service on the windows machine, the "Up Time" resets to
zero.  

What could I be doing wrong?  I have one machine working perfectly and 4
that are not with the traffic monitor.  Oh, another thing I tried was
setting up a probe to monitor TCP connections to each machine, and they
all work!  Someone help before I go postal... ;) 

Mike

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 6:03 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Maybe this is it... what is the difference between:

1:public at 10.10.10.11:
MRTG_INT_IP="10.10.10.11

Should these IP's be the same or is the MRTG_INT_IP telling the target
to go somewhere with that data?

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 5:55 PM
To: Waltman, Adam; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Yeah that was a mistake in my attempt to hide my ip range... I'm a
slickster I tell ya...

Anyway, I got the second computer to work for 10 minutes, but when I
added another  machine below it, it stopped again.  The first one is
going strong still though...


-----Original Message-----
From: Waltman, Adam [mailto:AWaltman at anacomp.com]
Sent: Wednesday, January 21, 2004 5:51 PM
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Problem with bandwidth monitor


The only thing I see that's different is the Target line.  The target
for Eclipse has a 129.238.158.202 address while it is looking at the 10
network address.  Filer1's target line has the same 10 network address
as the SetEnv line.

Adam

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 7:14 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Problem with bandwidth monitor



I'm wondering if anyone can tell me what I might be doing wrong here?
I'm running MRTG on a Linux box trying to monitor 2 windows machines.
For some reason, the first windows machine gives data but the other does
not.  I also have the SNMP services in windows setup exactly the same.
Please let me know if you see anything that I might be missing here.
Thanks!



########################################################################
###

Target[ECLIPSE]: 1:public at 129.238.158.202:
SetEnv[ECLIPSE]: MRTG_INT_IP="10.10.10.10"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[ECLIPSE]: 12500000
#-#Total[ECLIPSE]: Summary of Traffic
Title[ECLIPSE]: Traffic Analysis for Eclipse
PageTop[ECLIPSE]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Backup Server</TD></TR>
   <TR><TD>Maintainer:</TD>
<TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.10 (application
subnet)</TD></TR>
 </TABLE>

########################################################################
###
 

Target[FILER2]: 1:public at 10.10.10.11:
SetEnv[FILER2]: MRTG_INT_IP="10.10.10.11"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[FILER2]: 12500000
#-#Total[FILER2]: Summary of Traffic
Title[FILER2]: Traffic Analysis for FILER2
PageTop[FILER2]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Range Server</TD></TR>
   <TR><TD>Maintainer:</TD>
<TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.11 (application
subnet)</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

**********************************************************************
This message is intended for the addressee named and may contain
privileged information or confidential information or both. If you
are not the intended recipient please delete it and notify the sender.
**********************************************************************

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Fri Jan 23 17:45:37 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Fri, 23 Jan 2004 16:45:37 -0000
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor
Message-ID: <200401231646.i0NGk4Iw025090@knockout.kirtland.af.mil>

Sorry for not knowing, but will a WMI script run on a Linux server?  If it
doesn't, I'm sure someone has already written a script for Linux that does
this.  Thanks for the input William. :)

-----Original Message-----
From: William Owen [mailto:William.Owen at ProfilesInternational.com]
Sent: Friday, January 23, 2004 9:34 AM
To: Johnston Michael J Contr AFRL/DES; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] [mart] Re: Problem with bandwidth monitor


I had some issues early on monitoring windows boxes with SNMP and opted to
use WMI scripting to handle the job as apposed to SNMP.  Any value that you
can pull using WMI scripting can be graphed using MRTG.

Target[Example]: 'cscript //Nologo YourScript.vbs'

MRGT does a great job of graphing in this configuration.  Just remember that
your scripts need to feed it 4 bits of info:
Data I
Data O
Sys description
Sys uptime

If you only monitoring one thing (such as free memory or CPU usage) you can
output the value twice for Data I and Data O and use the noi or noo to
remove the redundant reading during graphing.

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil] 
Sent: Friday, January 23, 2004 9:18 AM
To: Dowling, Steve; mrtg at list.ee.ethz.ch
Subject: [mrtg] [mart] Re: Problem with bandwidth monitor

Thanks for the response!  I'm going to read though and see if I can figure
out exactly what I'm doing wrong with the SNMP on windows. =) 

Do you think that this method monitoring network traffic is that best or
should I be looking at another way?  Thanks again!

Mike Johnston

-----Original Message-----
From: Dowling, Steve [mailto:Steve.Dowling at tafensw.edu.au]
Sent: Thursday, January 22, 2004 7:44 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Mike,

Ah ha!  Zeros in the log file!  This smells like a crook response from
your Windows machine.  
You must work out what your Windows machine is giving you in response to
your snmp query.

Try another snmp mib browser, I get very good results with GETIF 
(http://www.wtcs.org/snmp4tpc/getif.htm).  This will hep you separate
the snmp problems, 
from the Windows problems, from the mrtg problems ... 

Steve Dowling

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil] 
Sent: Friday, 23 January 2004 3:52 AM
To: 'brandon.baker '; Johnston Michael J Contr AFRL/DES;
'mrtg at list.ee.ethz.ch '
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Bradon,

The log file has only zeros in it.  The numbers are spaced apart like a
normal log file, but it's like there is no data.  I also don't see any
errors in the mrtg log file.  The strange thing is that it started
working for a brief while as I was messing with the cfg, but when I
added new machines to the file, its stopped working again.

Am I possibly missing something on the windows machines?  I can't wait
to figure this out... Thanks!

Mike

-----Original Message-----
From: brandon.baker
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Sent: 1/22/2004 5:41 AM
Subject: RE: [mrtg] Re: [mart] Re: Problem with bandwidth monitor

Mike,

What shows up in your log file for the systems that don't work.  If no
log file is created, then what is the error that you get when you run
mrtg against the config file?


Brandon

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Thursday, January 22, 2004 12:17 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Okay, I've tried several things here.  

I've separated the services I'm wanting to monitor to other files and
that didn't work.  I've re-arranged things in each file to no avail.
I'm almost positive that the Linux box is reading the SNMP from the
windows machines because it's reading the "Up Time" correctly.  When I
restart the SNMP Service on the windows machine, the "Up Time" resets to
zero.  

What could I be doing wrong?  I have one machine working perfectly and 4
that are not with the traffic monitor.  Oh, another thing I tried was
setting up a probe to monitor TCP connections to each machine, and they
all work!  Someone help before I go postal... ;) 

Mike

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 6:03 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Maybe this is it... what is the difference between:

1:public at 10.10.10.11:
MRTG_INT_IP="10.10.10.11

Should these IP's be the same or is the MRTG_INT_IP telling the target
to go somewhere with that data?

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 5:55 PM
To: Waltman, Adam; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Yeah that was a mistake in my attempt to hide my ip range... I'm a
slickster I tell ya...

Anyway, I got the second computer to work for 10 minutes, but when I
added another  machine below it, it stopped again.  The first one is
going strong still though...


-----Original Message-----
From: Waltman, Adam [mailto:AWaltman at anacomp.com]
Sent: Wednesday, January 21, 2004 5:51 PM
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Problem with bandwidth monitor


The only thing I see that's different is the Target line.  The target
for Eclipse has a 129.238.158.202 address while it is looking at the 10
network address.  Filer1's target line has the same 10 network address
as the SetEnv line.

Adam

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 7:14 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Problem with bandwidth monitor



I'm wondering if anyone can tell me what I might be doing wrong here?
I'm running MRTG on a Linux box trying to monitor 2 windows machines.
For some reason, the first windows machine gives data but the other does
not.  I also have the SNMP services in windows setup exactly the same.
Please let me know if you see anything that I might be missing here.
Thanks!



########################################################################
###

Target[ECLIPSE]: 1:public at 129.238.158.202:
SetEnv[ECLIPSE]: MRTG_INT_IP="10.10.10.10"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[ECLIPSE]: 12500000
#-#Total[ECLIPSE]: Summary of Traffic
Title[ECLIPSE]: Traffic Analysis for Eclipse
PageTop[ECLIPSE]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Backup Server</TD></TR>
   <TR><TD>Maintainer:</TD>
<TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.10 (application
subnet)</TD></TR>
 </TABLE>

########################################################################
###
 

Target[FILER2]: 1:public at 10.10.10.11:
SetEnv[FILER2]: MRTG_INT_IP="10.10.10.11"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[FILER2]: 12500000
#-#Total[FILER2]: Summary of Traffic
Title[FILER2]: Traffic Analysis for FILER2
PageTop[FILER2]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Range Server</TD></TR>
   <TR><TD>Maintainer:</TD>
<TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.11 (application
subnet)</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

**********************************************************************
This message is intended for the addressee named and may contain
privileged information or confidential information or both. If you
are not the intended recipient please delete it and notify the sender.
**********************************************************************

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From William.Owen at ProfilesInternational.com  Fri Jan 23 18:07:52 2004
From: William.Owen at ProfilesInternational.com (William Owen)
Date: Fri, 23 Jan 2004 11:07:52 -0600
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor
Message-ID: <B1614B3FC265554DADE169EE8146665E018B87FA@piexchange1.piicorp.org>

I have not tested the configuration myself because I am polling from a
Windows box, but it seems that you can use Python to run WMI scripts against
a Windows box.
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&threadm=cv5t6.12
6%24M62.975%40newsfeed.slurp.net&rnum=9&prev=/groups%3Fhl%3Den%26lr%3D%26ie%
3DUTF-8%26oe%3DUTF-8%26q%3Dwmi%2Bscript%2Blinux%26sa%3DN%26tab%3Dwg


-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil] 
Sent: Friday, January 23, 2004 10:46 AM
To: William Owen; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] [mart] Re: Problem with bandwidth monitor

Sorry for not knowing, but will a WMI script run on a Linux server?  If it
doesn't, I'm sure someone has already written a script for Linux that does
this.  Thanks for the input William. :)

-----Original Message-----
From: William Owen [mailto:William.Owen at ProfilesInternational.com]
Sent: Friday, January 23, 2004 9:34 AM
To: Johnston Michael J Contr AFRL/DES; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] [mart] Re: Problem with bandwidth monitor


I had some issues early on monitoring windows boxes with SNMP and opted to
use WMI scripting to handle the job as apposed to SNMP.  Any value that you
can pull using WMI scripting can be graphed using MRTG.

Target[Example]: 'cscript //Nologo YourScript.vbs'

MRGT does a great job of graphing in this configuration.  Just remember that
your scripts need to feed it 4 bits of info:
Data I
Data O
Sys description
Sys uptime

If you only monitoring one thing (such as free memory or CPU usage) you can
output the value twice for Data I and Data O and use the noi or noo to
remove the redundant reading during graphing.

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil] 
Sent: Friday, January 23, 2004 9:18 AM
To: Dowling, Steve; mrtg at list.ee.ethz.ch
Subject: [mrtg] [mart] Re: Problem with bandwidth monitor

Thanks for the response!  I'm going to read though and see if I can figure
out exactly what I'm doing wrong with the SNMP on windows. =) 

Do you think that this method monitoring network traffic is that best or
should I be looking at another way?  Thanks again!

Mike Johnston

-----Original Message-----
From: Dowling, Steve [mailto:Steve.Dowling at tafensw.edu.au]
Sent: Thursday, January 22, 2004 7:44 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Mike,

Ah ha!  Zeros in the log file!  This smells like a crook response from
your Windows machine.  
You must work out what your Windows machine is giving you in response to
your snmp query.

Try another snmp mib browser, I get very good results with GETIF 
(http://www.wtcs.org/snmp4tpc/getif.htm).  This will hep you separate
the snmp problems, 
from the Windows problems, from the mrtg problems ... 

Steve Dowling

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil] 
Sent: Friday, 23 January 2004 3:52 AM
To: 'brandon.baker '; Johnston Michael J Contr AFRL/DES;
'mrtg at list.ee.ethz.ch '
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Bradon,

The log file has only zeros in it.  The numbers are spaced apart like a
normal log file, but it's like there is no data.  I also don't see any
errors in the mrtg log file.  The strange thing is that it started
working for a brief while as I was messing with the cfg, but when I
added new machines to the file, its stopped working again.

Am I possibly missing something on the windows machines?  I can't wait
to figure this out... Thanks!

Mike

-----Original Message-----
From: brandon.baker
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Sent: 1/22/2004 5:41 AM
Subject: RE: [mrtg] Re: [mart] Re: Problem with bandwidth monitor

Mike,

What shows up in your log file for the systems that don't work.  If no
log file is created, then what is the error that you get when you run
mrtg against the config file?


Brandon

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Thursday, January 22, 2004 12:17 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: [mart] Re: Problem with bandwidth monitor


Okay, I've tried several things here.  

I've separated the services I'm wanting to monitor to other files and
that didn't work.  I've re-arranged things in each file to no avail.
I'm almost positive that the Linux box is reading the SNMP from the
windows machines because it's reading the "Up Time" correctly.  When I
restart the SNMP Service on the windows machine, the "Up Time" resets to
zero.  

What could I be doing wrong?  I have one machine working perfectly and 4
that are not with the traffic monitor.  Oh, another thing I tried was
setting up a probe to monitor TCP connections to each machine, and they
all work!  Someone help before I go postal... ;) 

Mike

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 6:03 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Maybe this is it... what is the difference between:

1:public at 10.10.10.11:
MRTG_INT_IP="10.10.10.11

Should these IP's be the same or is the MRTG_INT_IP telling the target
to go somewhere with that data?

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 5:55 PM
To: Waltman, Adam; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Problem with bandwidth monitor


Yeah that was a mistake in my attempt to hide my ip range... I'm a
slickster I tell ya...

Anyway, I got the second computer to work for 10 minutes, but when I
added another  machine below it, it stopped again.  The first one is
going strong still though...


-----Original Message-----
From: Waltman, Adam [mailto:AWaltman at anacomp.com]
Sent: Wednesday, January 21, 2004 5:51 PM
To: 'Johnston Michael J Contr AFRL/DES'; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Problem with bandwidth monitor


The only thing I see that's different is the Target line.  The target
for Eclipse has a 129.238.158.202 address while it is looking at the 10
network address.  Filer1's target line has the same 10 network address
as the SetEnv line.

Adam

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Wednesday, January 21, 2004 7:14 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Problem with bandwidth monitor



I'm wondering if anyone can tell me what I might be doing wrong here?
I'm running MRTG on a Linux box trying to monitor 2 windows machines.
For some reason, the first windows machine gives data but the other does
not.  I also have the SNMP services in windows setup exactly the same.
Please let me know if you see anything that I might be missing here.
Thanks!



########################################################################
###

Target[ECLIPSE]: 1:public at 129.238.158.202:
SetEnv[ECLIPSE]: MRTG_INT_IP="10.10.10.10"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[ECLIPSE]: 12500000
#-#Total[ECLIPSE]: Summary of Traffic
Title[ECLIPSE]: Traffic Analysis for Eclipse
PageTop[ECLIPSE]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Backup Server</TD></TR>
   <TR><TD>Maintainer:</TD>
<TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.10 (application
subnet)</TD></TR>
 </TABLE>

########################################################################
###
 

Target[FILER2]: 1:public at 10.10.10.11:
SetEnv[FILER2]: MRTG_INT_IP="10.10.10.11"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[FILER2]: 12500000
#-#Total[FILER2]: Summary of Traffic
Title[FILER2]: Traffic Analysis for FILER2
PageTop[FILER2]: <H1>Traffic Analysis</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Range Server</TD></TR>
   <TR><TD>Maintainer:</TD>
<TD>michael.johnston at kirtland.af.mil</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/0 application subnet
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/0</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.10.11 (application
subnet)</TD></TR>
 </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

**********************************************************************
This message is intended for the addressee named and may contain
privileged information or confidential information or both. If you
are not the intended recipient please delete it and notify the sender.
**********************************************************************

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From djordan at completeweb.net  Fri Jan 23 18:26:45 2004
From: djordan at completeweb.net (Dayne Jordan)
Date: Fri, 23 Jan 2004 12:26:45 -0500
Subject: [mrtg] Rateup ERROR and Rateup WARNING
Message-ID: <40115955.60606@completeweb.net>

===========================
Rateup ERROR: /usr/local/mrtg-2/bin/rateup found switchport's log
               file was corrupt or not in sorted order: time: 1018137600.

Rateup WARNING: /usr/local/mrtg-2/bin/rateup could not read the
                 primary log file for switchport

==========================

Hardware/Software:
-- FreeBSD-4.9
-- 1.5ghz P4
-- 512MB Ram
-- Promise TX2 ATA Controller: 2-ATA100 40gb WD drives
-- MRTG-2.10.13 running cron'd

We are polling several switches and routers. Previously, we had
been using BSDi 4.2 to perform our monitoring and polling and
recently moved it to FreeBSD-4.9. Our config files were brought
over verbatim.

We are seeing errors as listed above, but not on every polling
cycle, and not always the same port/device. In fact, it seems
to be very random. Sometimes we may not see any complaints for
over a day - and even then its never the same port/device.
The graphs are updating correctly, MRTG has never exited on any
signals, all appears to be fine except these complaints.

I've searched extensively on the net via google and in these list
archives and found others with almost the same or identical issues
as we're having. It seems to be consistent regardless of the MRTG
version, and it seems to happen on a variety of OS platforms.

Any ideas?

djordan( AT )completeweb.net


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Daryl.Buckman at nwo02.usace.army.mil  Fri Jan 23 19:22:00 2004
From: Daryl.Buckman at nwo02.usace.army.mil (Buckman, Daryl  NWO)
Date: Fri, 23 Jan 2004 10:22:00 -0800
Subject: [mrtg] MRTG: indexmaker pagetop error
Message-ID: <8DF66C145F62D411AE5300D0B747B116042D2000@nwomail07.nwo.usace.army.mil>


indexmaker dies with following error and target HTML file has 0 length
MRTG version is 2.9.11


C:\MRTG-2~1.11\CFG>perl ..\bin\indexmaker d_incl.cfg  --sort=title
--show=day
 --section=description --title=NWO_Traffic_Monitor  1>d_incl.htm
Use of uninitialized value in pattern match (m//) at ..\bin\indexmaker line
369.

ERROR: no Description: line PageTop property in dcs_1.1 section


   This is the target section referenced
==============================

Target[DCS_1.1]:1:public\@slot_1.1 at 10.10.1.1
Directory[DCS_1.1]: nwowan/dcs
MaxBytes[DCS_1.1]:125000000

#UnScaled[DCS_1.1]: d
#WithPeak[DCS_1.1]: wm
Options[DCS_1.1]: bits
Title[DCS_1.1]:Data Center Switch -- 3COM
PageTop[DCS_1.1]:<H1>Traffic Analysis for DCS 1st Floor, 1.1, NE</H1>
 <TABLE>
   <TR><TD>Interface Port: </TD>
    <TD> 1</TD></TR>
   <TR><TD>Link Speed: </TD>
#    <TD> 1 Gbites/sec & 125 MBytes/sec</TD></TR>
    <TD> 1 Gbites/sec</TD></TR>
   <TR><TD>Point of Contact: </TD>
    <TD> NWO-IM-S 402-221-3308/4009</TD></TR>
 </TABLE>

==============================

    The input file d_incl.cfg has multiple #include: filename entries in
effect creating a 700+ section file.  I have commented out various include
files but the problem persists.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From kschneider at raytheon.com  Fri Jan 23 20:06:34 2004
From: kschneider at raytheon.com (Kirk Schneider)
Date: Fri, 23 Jan 2004 13:06:34 -0600
Subject: [mrtg] Re: Cisco Localdirector
In-Reply-To: <9759E62CD3776D47878234547DAEAC9E03465DD1@ascexchange.local.autodata.net>
References: <9759E62CD3776D47878234547DAEAC9E03465DD1@ascexchange.local.autodata.net>
Message-ID: <401170BA.7090109@raytheon.com>

Dave,


Here is my sample config for monitoring Cisco LocalDirector Connections, Packets,
Bytes per virtual server.  Also change the OIDs and you can watch the real services.
Listed below is the ftp site where I got the OIDs and the ones I have been
successful in polling.


# ftp://ftp.cisco.com/pub/mibs/oid/CISCO-LOCAL-DIRECTOR-MIB.oid
# "cldeVirtualTotalConnections"         "1.3.6.1.4.1.9.9.99.1.1.2.1.6"
# "cldeVirtualTotalPackets"             "1.3.6.1.4.1.9.9.99.1.1.2.1.7"
# "cldeVirtualTotalBytes"               "1.3.6.1.4.1.9.9.99.1.1.2.1.8"
# "cldeRealTotalConnections"            "1.3.6.1.4.1.9.9.99.1.2.2.1.6"
# "cldeRealTotalPackets"                "1.3.6.1.4.1.9.9.99.1.2.2.1.7"
# "cldeRealTotalBytes"                  "1.3.6.1.4.1.9.9.99.1.2.2.1.8"

Target[cldeVirtualTotalConnections_AAA.BBB.CCC.DDD_tcpPPP]: 1.3.6.1.4.1.9.9.99.1.1.2.1.6.AAA.BBB.CCC.DDD.PPP.0.6&1.3.6.1.4.1.9.9.99.1.
1.2.1.6.AAA.BBB.CCC.DDD.PPP.0.6:PUBLIC at HOSTNAME:::::2
Legend1[cldeVirtualTotalConnections_AAA.BBB.CCC.DDD_tcpPPP]: tcp PPP (ftp) connections
Legend2[cldeVirtualTotalConnections_AAA.BBB.CCC.DDD_tcpPPP]: tcp PPP (ftp) connections
LegendI[cldeVirtualTotalConnections_AAA.BBB.CCC.DDD_tcpPPP]: Connections
LegendO[cldeVirtualTotalConnections_AAA.BBB.CCC.DDD_tcpPPP]: Connections
MaxBytes[cldeVirtualTotalConnections_AAA.BBB.CCC.DDD_tcpPPP]: 4294967295
Options[cldeVirtualTotalConnections_AAA.BBB.CCC.DDD_tcpPPP]: growright, nopercent, perminute, noo
PageTop[cldeVirtualTotalConnections_AAA.BBB.CCC.DDD_tcpPPP]: <H1>HOSTNAME - VIRTUALNAME (virtual) - tcp PPP (ftp) connections</H1>
ShortLegend[cldeVirtualTotalConnections_AAA.BBB.CCC.DDD_tcpPPP]: per/min
Title[cldeVirtualTotalConnections_AAA.BBB.CCC.DDD_tcpPPP]: HOSTNAME - VIRTUALNAME (virtual) - tcp PPP (ftp) connections
YLegend[cldeVirtualTotalConnections_AAA.BBB.CCC.DDD_tcpPPP]: per minute

Target[cldeVirtualTotalPackets_AAA.BBB.CCC.DDD_tcpPPP]: 1.3.6.1.4.1.9.9.99.1.1.2.1.7.AAA.BBB.CCC.DDD.PPP.0.6&1.3.6.1.4.1.9.9.99.1.1.2.
1.7.AAA.BBB.CCC.DDD.PPP.0.6:PUBLIC at HOSTNAME:::::2
Legend1[cldeVirtualTotalPackets_AAA.BBB.CCC.DDD_tcpPPP]: tcp PPP (ftp) packets
Legend2[cldeVirtualTotalPackets_AAA.BBB.CCC.DDD_tcpPPP]: tcp PPP (ftp) packets
LegendI[cldeVirtualTotalPackets_AAA.BBB.CCC.DDD_tcpPPP]: Packets
LegendO[cldeVirtualTotalPackets_AAA.BBB.CCC.DDD_tcpPPP]: Packets
MaxBytes[cldeVirtualTotalPackets_AAA.BBB.CCC.DDD_tcpPPP]: 4294967295
Options[cldeVirtualTotalPackets_AAA.BBB.CCC.DDD_tcpPPP]: growright, nopercent, perminute, noo
PageTop[cldeVirtualTotalPackets_AAA.BBB.CCC.DDD_tcpPPP]: <H1>HOSTNAME - VIRTUALNAME (virtual) - tcp PPP (ftp) packets</H1>
ShortLegend[cldeVirtualTotalPackets_AAA.BBB.CCC.DDD_tcpPPP]: per/min
Title[cldeVirtualTotalPackets_AAA.BBB.CCC.DDD_tcpPPP]: HOSTNAME - VIRTUALNAME (virtual) - tcp PPP (ftp) packets
YLegend[cldeVirtualTotalPackets_AAA.BBB.CCC.DDD_tcpPPP]: per minute

Target[cldeVirtualTotalBytes_AAA.BBB.CCC.DDD_tcpPPP]: 1.3.6.1.4.1.9.9.99.1.1.2.1.8.AAA.BBB.CCC.DDD.PPP.0.6&1.3.6.1.4.1.9.9.99.1.1.2.1.
8.AAA.BBB.CCC.DDD.PPP.0.6:PUBLIC at HOSTNAME:::::2
Legend1[cldeVirtualTotalBytes_AAA.BBB.CCC.DDD_tcpPPP]: tcp PPP (ftp) bytes
Legend2[cldeVirtualTotalBytes_AAA.BBB.CCC.DDD_tcpPPP]: tcp PPP (ftp) bytes
LegendI[cldeVirtualTotalBytes_AAA.BBB.CCC.DDD_tcpPPP]: Bytes
LegendO[cldeVirtualTotalBytes_AAA.BBB.CCC.DDD_tcpPPP]: Bytes
MaxBytes[cldeVirtualTotalBytes_AAA.BBB.CCC.DDD_tcpPPP]: 4294967295
Options[cldeVirtualTotalBytes_AAA.BBB.CCC.DDD_tcpPPP]: growright, nopercent, perminute, noo
PageTop[cldeVirtualTotalBytes_AAA.BBB.CCC.DDD_tcpPPP]: <H1>HOSTNAME - VIRTUALNAME (virtual) - tcp PPP (ftp) bytes</H1>
ShortLegend[cldeVirtualTotalBytes_AAA.BBB.CCC.DDD_tcpPPP]: per/min
Title[cldeVirtualTotalBytes_AAA.BBB.CCC.DDD_tcpPPP]: HOSTNAME - VIRTUALNAME (virtual) - tcp PPP (ftp) bytes
YLegend[cldeVirtualTotalBytes_AAA.BBB.CCC.DDD_tcpPPP]: per minute



-- 
Kirk Schneider                          972-952-4645 (work)
Raytheon Corporate IT Security          214-912-8679 (cell)
kschneider at raytheon.com                 888-431-7621 (pager)

"If you think the problem is bad now just wait until we've solved it."



-------- Original Message --------
Subject: [mrtg] Cisco Localdirector
Date: Thu, 22 Jan 2004 21:16:31 -0500
From: Dave Morrow <david.morrow at autodata.net>
To: mrtg at list.ee.ethz.ch

Hi, all.  I have, off and on been playing with getting a Cisco Localdirector
MRTG Configuration working.  I finally had some success so I thought I would
share it with anyone who might also be looking for such a config.

# Connections per minute

Target[ld-virt1-conn]:
1.3.6.1.4.1.9.9.99.1.1.3.1.7.AAA.BBB.CCC.DDD.PPP.0.6.0.0.0.0.0.0.0.0&1.3.6.1
.4.1.9.9.99.1.1.3.1.7.AAA.BBB.CCC.DDD.PPP.0.6.0.0.0.0.0.0.0.0:public at LLL.MMM
.NNN.OOO:::::2
WithPeak[ld-virt1-conn]: ymw
Unscaled[ld-virt1-conn]: dwmy
MaxBytes[ld-virt1-conn]: 1000
YLegend[ld-virt1-conn]: Connections
ShortLegend[ld-virt1-conn]: con/min
LegendI[ld-virt1-conn]: In Use:
LegendO[ld-virt1-conn]:
Options[ld-virt1-conn]: noo, growright, nopercent, nolegend, perminute
Title[ld-virt1-conn]: VW Connections
PageTop[ld-virt1-conn]: <H1>Virtual IP AAA.BBB.CCC.DDD Connections</H1>

# Bandwidth

Target[ld-virt1-bandwidth]:
1.3.6.1.4.1.9.9.99.1.1.3.1.9.AAA.BBB.CCC.DDD.PPP.0.6.0.0.0.0.0.0.0.0&1.3.6.1
.4.1.9.9.99.1.1.3.1.9.AAA.BBB.CCC.DDD.PPP.0.6.0.0.0.0.0.0.0.0:public at LLL.MMM
.NNN.OOO:::::2
Options[ld-virt1-bandwidth]: gauge, nopercent, avgpeak
MaxBytes[ld-virt1-bandwidth]: 1250000
Title[ld-virt1-bandwidth]: Virtual1 Bandwidth
PageTop[ld-virt1-bandwidth]: <H1>Virtual 1 AAA.BBB.CCC.DDD.PPP
Bandwidth</H1>


David Morrow
Systems Technical Lead, IT Operations
Autodata Solutions Company
david.morrow at autodata.net
P: (519) 451-2323

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Jonathan_Wolf at cable.comcast.com  Fri Jan 23 22:51:33 2004
From: Jonathan_Wolf at cable.comcast.com (Wolf, Jonathan)
Date: Fri, 23 Jan 2004 16:51:33 -0500
Subject: [mrtg] Logarithmic Scaling using 14all.cgi
Message-ID: <0CE14A5F2074B4499607FED32B3C314D016C95E5@cbcexcg01.comcastbusiness.biz>

Has anyone successfully gotten graphs to draw with a Logarithmic scaled Y
Axis using 14all.cgi ver 1.1p25?  I'm having problems coming up with the
correct config line to do so.  I either get errors as I am using it per
1.0p26 or I get blank graphics (no graph visible).  I'm having a little
trouble following the documentation on the site.
 
Does anyone have any other recommendations for CGI's that will allow me to
not hard-code what config file I use and pass it via URL stuffing?  I want
to give users the option of passing a URL with the config name and have it
generate appropriately, possibly from another system.
 
Thanks in advance
 
jw
 
Jonathan Wolf
Comcast Commercial Services
856.638.4266
mobile 484.955.1572
 <mailto:jonathan_wolf at cable.comcast.com> jonathan_wolf at cable.comcast.com 

 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From yanping at ucs.ubc.ca  Fri Jan 23 23:48:06 2004
From: yanping at ucs.ubc.ca (Yanping Gu)
Date: Fri, 23 Jan 2004 14:48:06 -0800
Subject: [mrtg] using MRTG to graph data with timestamp earlier than now
Message-ID: <4011A4A6.606@ucs.ubc.ca>

Hi all,

Please answer this questions.. I'm setting MRTG to call an external 
script. The script contains data I copied out from a router every once a 
while. I run MRTG on cronjob. The output of the script is the in and out 
counter of interfaces. Since the file I copied out of the router 
contains data happened in the past hour, the output of the script 
wouldn't be the value of the current time. How can  I get MRTG to graph 
on an earlier timestamp?

Your reply is appreciated ...
yanping


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Ben.Lewellen at alltel.com  Sat Jan 24 00:26:46 2004
From: Ben.Lewellen at alltel.com (Lewellen, Ben)
Date: Fri, 23 Jan 2004 17:26:46 -0600
Subject: [mrtg] POS OC-12 on Juniper M20 graphing incorrect
Message-ID: <1074900406.11856.26.camel@samba>

I have a M20 with a POS OC-12 going to AT&T and the bandwith utl is
about 350M - 400M, but MRTG is showing this to be 50M to 60M?

All of my other OC-12 and GE's read correct that are below 100M

I tried it in RRDtools with 14all.cgi and that did not work either can
someone help?

See config below

Target[so-2-1-0]: 82:publica at x.x.x.x: 
SetEnv[so-2-1-0]: MRTG_INT_IP="adress" MRTG_INT_DESCR="so-0/3/0" 
MaxBytes[so-2-1-0]: 62200000 
Title[so-2-1-0]: so-2/1/0 -- atlngacjp01-m20 
PageTop[so-2-1-0]: <H1>so-2/1/0 -- atlngacjp01-m20</H1> 
<TABLE> 
 <TR><TD>System:</TD> <TD>atlngacjp01-m20</TD></TR> 
 <TR><TD>Maintainer:</TD> <TD>Ben </TD></TR> 
 <TR><TD>Description:</TD><TD>OC-12 Connection to AT&T: CID</TD></TR>  
 <TR><TD>ifType:</TD> <TD>sonet (39)</TD></TR> 
 <TR><TD>ifName:</TD> <TD>so-2/1/0</TD></TR> 
 <TR><TD>Max Speed:</TD> <TD>622.1 Mbits/s</TD></TR> 
 <TR><TD>Ip:</TD> <TD> </TD></TR> 
</TABLE>
-- 
Ben Lewellen
ALLTEL-DataNOC
Network Analyst
(w)501-905-5005
(f)501-905-7001
(yahoo)blewell99
******************************************************************************************
The information contained in this message, including attachments, may contain 
privileged or confidential information that is intended to be delivered only to the 
person identified above. If you are not the intended recipient, or the person 
responsible for delivering this message to the intended recipient, ALLTEL requests 
that you immediately notify the sender and asks that you do not read the message or its 
attachments, and that you delete them without copying or sending them to anyone else. 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From gra.s.downey at lmco.com  Sat Jan 24 00:34:07 2004
From: gra.s.downey at lmco.com (Downey, Gra S)
Date: Fri, 23 Jan 2004 15:34:07 -0800
Subject: [mrtg] MRTG Mailing List Archives
Message-ID: <CB005D569AAFA24997E329BB306FF890568800@EMSS01M12.us.lmco.com>

Is the mrtg mailing list archive at the web address below still being maintained? When looking at the 'Date Index' sorting, the newest posting I can find is one by Muhammed Ali dated 03/10/27.

mrtg mailing list archive:
http://www.ee.ethz.ch/~slist/mrtg/


Gra Downey
Network Engineer
Lockheed Martin Tech Ops

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From E.VDB at sherwineu.com  Sun Jan 25 11:24:59 2004
From: E.VDB at sherwineu.com (Van den Bossche Eric)
Date: Sun, 25 Jan 2004 11:24:59 +0100
Subject: [mrtg] ASP.NET version of 14all.cgi
Message-ID: <166E6675796A7247A7BC787D7AD12C9B159939@mail.sherwineu.com>

Guy's,

I'm about to release the first beta. I'm looking for 5 beta testers to try
it out.
I don't have to mention that since this is a beta, to not test this on  a
production server.

Email your request to e[dot]vdb[at]sherwineu[dot]com

Greetings Eric - Italy

 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jwixted at limecity.com  Sun Jan 25 15:14:18 2004
From: jwixted at limecity.com (Joe Wixted)
Date: Sun, 25 Jan 2004 09:14:18 -0500
Subject: [mrtg] Mb vs Gb identifiers on graph
Message-ID: <4C558BF864410C4FA00F8458F4A2F3FC3BE0@dell2003.limecity.local>

My apologies if this has been asked and answered numerous times in the
past.  I searched the archives, but couldn't find an answer...
 
My graphs - one of which can be found at
http://mrtg.osv.com/acs-sql.ldisk.freee.html
<http://mrtg.osv.com/acs-sql.ldisk.freee.html>  - all show "M Gb" when
relating to disk space in the footer, when it should really be "Gb", and
"M" along the left axis, when it should really say be "G".
 
My config for this graph is:
 
Title[acs-sql.ldisk.freee]:ACS-SQL Free Gigabytes (E:)
RouterUptime[acs-sql.ldisk.freee]: diablo at acs-sql:
Pagetop[acs-sql.ldisk.freee]: <H1>ACS-SQL Free Gigabytes (E:)</H1>
Target[acs-sql.ldisk.freee]:
1.3.6.1.4.1.9600.1.1.1.1.20.2.69.58&1.3.6.1.4.1.9600.1.1.1.1.20.2.69.58:
public at acs-sql:
MaxBytes[acs-sql.ldisk.freee]: 169000
unscaled[acs-sql.ldisk.freee]: dwmy
Options[acs-sql.ldisk.freee]: gauge, unknaszero, growright, integer
kMG[acs-sql.ldisk.freee]: ,M,G,T,P
# kilo[acs-sql.ldisk.freee]: 1024
WithPeak[acs-sql.ldisk.freee]: wmy
YLegend[acs-sql.ldisk.freee]: Gb Free
ShortLegend[acs-sql.ldisk.freee]: Gb
Legend1[acs-sql.ldisk.freee]: Available Disk Space
Legend2[acs-sql.ldisk.freee]: 
LegendI[acs-sql.ldisk.freee]: GB Free
LegendO[acs-sql.ldisk.freee]: 
 
TIA!
 
    -Joe
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Sun Jan 25 20:26:49 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Sun, 25 Jan 2004 20:26:49 +0100
Subject: [mrtg] Re: Mb vs Gb identifiers on graph
In-Reply-To: <4C558BF864410C4FA00F8458F4A2F3FC3BE0@dell2003.limecity.local>; from jwixted@limecity.com on Sun, Jan 25, 2004 at 09:14:18AM -0500
References: <4C558BF864410C4FA00F8458F4A2F3FC3BE0@dell2003.limecity.local>
Message-ID: <20040125202649.A15806@slot.hollandcasino.net>

On Sun, Jan 25, 2004 at 09:14:18AM -0500, Joe Wixted wrote:

> My graphs - one of which can be found at
> http://mrtg.osv.com/acs-sql.ldisk.freee.html
> <http://mrtg.osv.com/acs-sql.ldisk.freee.html>  - all show "M Gb" when
> relating to disk space in the footer, when it should really be "Gb", and
> "M" along the left axis, when it should really say be "G".

You're mixing up units and prefixes.

In "km/h", "k" is the prefix and "m/h" is the unit.
In "Free bytes", "bytes" is the unit, not "Gb".

> kMG[acs-sql.ldisk.freee]: ,M,G,T,P
> ShortLegend[acs-sql.ldisk.freee]: Gb

You're getting millions of Gigabytes.  I guess that's not right,
but that is because you instructed MRTG to do so.

The unit is bytes so set "Shortlegend[acs-sql.ldisk.freee]: B

If you're entering gigabytes into MRTG (in stead of bytes), the
default meaning of kMG (,k,M,G,T,P) has to be multiplied by
1,000,000,000 as well.  Basically the first three multipliers
are skipped (you don't do bytes, kilobytes and megabytes) so
do the same in kMG.

You'll have to look the rest up but here's the start: G,T,P,...

HTH
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From girts.legzdins at energo.lv  Mon Jan 26 08:45:03 2004
From: girts.legzdins at energo.lv (Girts Legzdinsh)
Date: Mon, 26 Jan 2004 09:45:03 +0200
Subject: [mrtg] is this the right place for askin' Q 'bout rrdtool integration in mrtg?
Message-ID: <004201c3e3e0$4f2dffe0$4a25010a@GLegzdinsNote>

so my situation...
my mrtg is workin' fine..
I've installed rrdt, 'couse I need to poll the snmp device data every min
not every 5 mins.
I updated my device.cfg file with pathadd and libadd
but there comes out a error when i'm doing the "mrtg device.cfg" thing
the error iz..
----
Can't locate loadable object for module RRDs in @INC (@INC contains:
/opt/mrtg/rrdtool/rrdtool-1.0.46/perl-shared/
/opt/mrtg/mrtg-2/bin/../lib/mrtg2 /opt/mrtg/mrtg-2/bin
/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi /opt/perl/lib/5.6.1
/opt/perl/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi
/opt/perl/lib/site_perl/5.6.1 /opt/perl/lib/site_perl .) at
/opt/mrtg/mrtg-2/bin/mrtg line 273
Compilation failed in require at /opt/mrtg/mrtg-2/bin/mrtg line 273.
----

int mrtg line 273 he want the RRDs.pm file.. but this file is in the @INC
dir!!
ls -laF of /opt/mrtg/rrdtool/rrdtool-1.0.46/perl-shared/
----
drwxr-xr-x   4 510        50            8192 Jan 23 10:05 ./
drwxr-xr-x  14 510        50            8192 Jan 23 10:00 ../
-rw-r--r--   1 510        50              53 Feb 26  2002 MANIFEST
-rw-r--r--   1 root       sys          23055 Jan 23 10:05 Makefile
-rw-r--r--   1 root       sys            772 Jan 23 10:00 Makefile.PL
-rw-r--r--   1 510        50             805 Aug 12 23:50 Makefile.PL.in
-rw-r--r--   1 510        50             237 Feb 26  2002 README
-rw-r--r--   1 root       sys           9923 Jan 23 10:04 RRDs.c
-rw-r--r--   1 510        50            3072 Jan  4 15:53 RRDs.pm
-rw-r--r--   1 510        50            7881 Nov 27 08:32 RRDs.xs
drwxr-xr-x   5 root       sys             96 Jan 23 10:03 blib/
-rw-r--r--   1 510        50             633 Feb 26  2002 ntmake.pl
-rw-r--r--   1 root       sys              0 Jan 23 10:03 pm_to_blib
-rw-r--r--   1 510        50            4157 Feb 26  2002 rrdpl.dsp
-rw-r--r--   1 510        50             531 Feb 26  2002 rrdpl.dsw
drwxr-xr-x   2 510        50              96 Jan 23 09:57 t/
------

so I don't understand what'a f&*(?!
I'm a newbie in perl so this is the first problem..:))
with mrtg i'm workin 'bout a month or two..
so help..
I'm using HP-UX 11
----
perl -V
  Platform:
    osname=hpux, osvers=11.00, archname=PA-RISC1.1-thread-multi
    uname='hp-ux llbertha b.11.00 u 9000800 2002402864 unlimited-user
license '




config_args='-des -Dcf_by=ActiveState -Dcf_email=ActivePerl at ActiveState.com 
-Uinstallusrbinperl -Dusethreads -Duseithreads -Duselargefiles -Dinc_version
_list=5.6.0/$archname
5.6.0 -Dcc=gcc -Accflags=-mpa-risc-1-1 -fPIC -Dcccdlflags=-fPIC -Dd_attribut
=undef -Darchname=PA-RISC1.1 -Dprefix=/opt/perl'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
    useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
  Compiler:
    cc='gcc', ccflags
='-D_POSIX_C_SOURCE=199506L -D_HPUX_SOURCE -L/lib/pa1.1 -DUINT32_MAX_BROKEN 
-mpa-risc-1-1 -fPIC -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_S
OURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O',




cppflags='-D_POSIX_C_SOURCE=199506L -D_HPUX_SOURCE -L/lib/pa1.1 -DUINT32_MAX
_BROKEN -mpa-risc-1-1 -fPIC -fno-strict-aliasing -I/usr/local/include'
    ccversion='', gccversion='2.9-hppa-991112', gccosandvers='hpux11.00'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
    alignbytes=8, usemymalloc=n, prototype=define
  Linker and Libraries:
    ld='ld', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /usr/ccs/lib




libs=-lnsl -lnm -lndbm -lmalloc -ldld -lm -lpthread -lc -lndir -lcrypt -lsec

   perllibs=-lnsl -lnm -lmalloc -ldld -lm -lpthread -lc -lndir -lcrypt -lsec
    libc=/lib/libc.sl, so=sl, useshrplib=false, libperl=libperl.a
  Dynamic Linking:
    dlsrc=dl_hpux.xs, dlext=sl, d_dlsymun=undef, ccdlflags='-Wl,-E '
    cccdlflags='-fPIC', lddlflags='-b -L/usr/local/lib'


Characteristics of this binary (from libperl):
  Compile-time options: MULTIPLICITY USE_ITHREADS USE_LARGE_FILES
PERL_IMPLICIT_CONTEXT
  Locally applied patches:
        ActivePerl Build 627
  Built under hpux
  Compiled at Jun 20 2001 21:42:53
  @INC:
    /opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi
    /opt/perl/lib/5.6.1
    /opt/perl/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi
    /opt/perl/lib/site_perl/5.6.1
    /opt/perl/lib/site_perl
----


plz help!!

Girts Legzdins
Network Administrator
Latvenergo
Technical Center
Latvia
girts.legzdins at latvenergo.lv


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Mon Jan 26 17:59:43 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Mon, 26 Jan 2004 16:59:43 -0000
Subject: [mrtg] Windows 2002 SNMP
Message-ID: <200401261700.i0QH0DJA023435@knockout.kirtland.af.mil>

Has anyone noticed a problem using cfgmaker with Windows 2002?  I keep
getting this error:

#############################################

--base: Get Device Info on public at 10.10.10.10:
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.10.10.10" [10.10.10.10].161)
                  community: "public"
                 request ID: 122120544
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/local/mrtg/bin/../lib/mrtg2/SNMP_util.pm line 450
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on
public at 10.10.10.10:
 at ./cfgmaker line 657
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifDescr scanning because public at 129.238.159.51: does not
seem to support it

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From michael.johnston at kirtland.af.mil  Mon Jan 26 18:20:48 2004
From: michael.johnston at kirtland.af.mil (Johnston Michael J Contr AFRL/DES)
Date: Mon, 26 Jan 2004 17:20:48 -0000
Subject: [mrtg] Re: Windows 2002 SNMP
Message-ID: <200401261721.i0QHLVIs029454@knockout.kirtland.af.mil>

Nevermind...  I figured it out... =)

-----Original Message-----
From: Johnston Michael J Contr AFRL/DES
[mailto:michael.johnston at kirtland.af.mil]
Sent: Monday, January 26, 2004 10:00 AM
To: mrtg-liste
Subject: [mrtg] Windows 2002 SNMP


Has anyone noticed a problem using cfgmaker with Windows 2002?  I keep
getting this error:

#############################################

--base: Get Device Info on public at 10.10.10.10:
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.10.10.10" [10.10.10.10].161)
                  community: "public"
                 request ID: 122120544
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/local/mrtg/bin/../lib/mrtg2/SNMP_util.pm line 450
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on
public at 10.10.10.10:
 at ./cfgmaker line 657
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifDescr scanning because public at 129.238.159.51: does not
seem to support it

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From nistor at snickers.org  Mon Jan 26 19:45:24 2004
From: nistor at snickers.org (Jon Nistor)
Date: Mon, 26 Jan 2004 13:45:24 -0500 (EST)
Subject: [mrtg] Missing values on poll/write.
Message-ID: <20040126134425.O97142@spike.snickers.org>

Howdy,

I've run into a very very big stumper that I can't seem to figure out.
I've got a 6006 I'm polling.  Its gig and fe ports except that #6/41 is
the only port thats giving me grief so far. (its FE)

Its a new port thats never been used before so the counters were 0.
Plugged the cable into it and moved the pointer over to that port, thought
it was fine then got up in the morning and realize it was only logging 1
value, outgoing.

This is a snipit from the rrd file (from more testing):
  <!-- 2004-01-26 12:30:00 EST / 1075138200 --> <row><v> NaN </v><v> NaN </v></row>
  <!-- 2004-01-26 12:35:00 EST / 1075138500 --> <row><v> NaN </v><v> NaN </v></row>
  <!-- 2004-01-26 12:40:00 EST / 1075138800 --> <row><v> NaN </v><v> NaN </v></row>
  <!-- 2004-01-26 12:45:00 EST / 1075139100 --> <row><v> NaN </v><v> NaN </v></row>
  <!-- 2004-01-26 12:50:00 EST / 1075139400 --> <row><v> NaN </v><v> NaN </v></row>
  <!-- 2004-01-26 12:55:00 EST / 1075139700 --> <row><v> NaN </v><v> 8.7832688040e+05 </v></row>
  <!-- 2004-01-26 13:00:00 EST / 1075140000 --> <row><v> NaN </v><v> 8.7511844890e+05 </v></row>
  <!-- 2004-01-26 13:05:00 EST / 1075140300 --> <row><v> NaN </v><v> 9.4455772902e+05 </v></row>
  <!-- 2004-01-26 13:10:00 EST / 1075140600 --> <row><v> NaN </v><v> 8.8721144227e+05 </v></row>
  <!-- 2004-01-26 13:15:00 EST / 1075140900 --> <row><v> NaN </v><v> 9.2134710196e+05 </v></row>
  <!-- 2004-01-26 13:20:00 EST / 1075141200 --> <row><v> NaN </v><v> 9.3205119813e+05 </v></row>
  <!-- 2004-01-26 13:25:00 EST / 1075141500 --> <row><v> NaN </v><v> 8.8311643436e+05 </v></row>

When I poll the interfaces manually (script polling every 10 seconds):
nistor at eh ~# sh file.sh
IF-MIB::ifHCInOctets.58 = Counter64: 944515405259
IF-MIB::ifHCOutOctets.58 = Counter64: 106165896660
IF-MIB::ifHCInUcastPkts.58 = Counter64: 1189833873
IF-MIB::ifHCOutUcastPkts.58 = Counter64: 503025605

IF-MIB::ifHCInOctets.58 = Counter64: 944534971874
IF-MIB::ifHCOutOctets.58 = Counter64: 106168372771
IF-MIB::ifHCInUcastPkts.58 = Counter64: 1189856811
IF-MIB::ifHCOutUcastPkts.58 = Counter64: 503037567

IF-MIB::ifHCInOctets.58 = Counter64: 944558847014
IF-MIB::ifHCOutOctets.58 = Counter64: 106171468865
IF-MIB::ifHCInUcastPkts.58 = Counter64: 1189883314
IF-MIB::ifHCOutUcastPkts.58 = Counter64: 503051169

IF-MIB::ifHCInOctets.58 = Counter64: 944583105612
IF-MIB::ifHCOutOctets.58 = Counter64: 106174553197
IF-MIB::ifHCInUcastPkts.58 = Counter64: 1189909544
IF-MIB::ifHCOutUcastPkts.58 = Counter64: 503063324

Counters appear to be fine.

I've rm'd the rrd file and had mrtg recreate the file.  I ended up with
the same results as pasted above with the incoming not registering.

I thought maybe it was an snmpget problem from mrtg so I went to look at
the tcpdump transactions and they appear to be fine, values are being
returned in the packet.

Has anyone run into this kind of behaviour before?

sw:
 mrtg    2.10.13
 rrdtool 1.0.45
 os      freebsd 5.x


Thanks,

 ________
  Jon (nistor at snickers.org) - iioiiooo.oiiiiiio.oioiioio.ooooooio

: EOF
:

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jmilam at wirelessfrontier.net  Mon Jan 26 20:21:21 2004
From: jmilam at wirelessfrontier.net (Jeff)
Date: Mon, 26 Jan 2004 13:21:21 -0600
Subject: [mrtg] Check Script
Message-ID: <016b01c3e441$952198c0$7108010a@ws3>

Is there a script to check all of your MRTG files to make sure they are being update and report if they are not?
Jeffrey S. Milam (jmilam at wirelessfrontier.net)
Wireless Frontier Internet
(432) 837-7255
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From alex at ergens.op.het.net  Mon Jan 26 23:12:24 2004
From: alex at ergens.op.het.net (Alex van den Bogaerdt)
Date: Mon, 26 Jan 2004 23:12:24 +0100
Subject: [mrtg] Re: Missing values on poll/write.
In-Reply-To: <20040126134425.O97142@spike.snickers.org>; from nistor@snickers.org on Mon, Jan 26, 2004 at 01:45:24PM -0500
References: <20040126134425.O97142@spike.snickers.org>
Message-ID: <20040126231224.A25958@slot.hollandcasino.net>

On Mon, Jan 26, 2004 at 01:45:24PM -0500, Jon Nistor wrote:


> Its a new port thats never been used before so the counters were 0.
> Plugged the cable into it and moved the pointer over to that port, thought
> it was fine then got up in the morning and realize it was only logging 1
> value, outgoing.
> 
> This is a snipit from the rrd file (from more testing):

[snip lines showing NaN as ifInOctet rates]

> IF-MIB::ifHCInOctets.58 = Counter64: 944515405259
> IF-MIB::ifHCInOctets.58 = Counter64: 944534971874
> IF-MIB::ifHCInOctets.58 = Counter64: 944558847014
> IF-MIB::ifHCInOctets.58 = Counter64: 944583105612

Increase roughly 20,000,000 in 10 seconds, that's 2 MBps or 16 Mbps.

Check that you didn't set MaxBytes to, for instance, 1.25 M.

HTH
Alex
-- 
begin  sig
http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
This message was produced without any <iframe tags

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From swatts at connect.com.au  Mon Jan 26 23:19:29 2004
From: swatts at connect.com.au (Simon Watts)
Date: Tue, 27 Jan 2004 09:19:29 +1100 (EST)
Subject: [mrtg] Re: MRTG: indexmaker pagetop error
In-Reply-To: <8DF66C145F62D411AE5300D0B747B116042D2000@nwomail07.nwo.usace.army.mil>
Message-ID: <Pine.GSO.4.43.0401270914130.16338-100000@nara.off.connect.com.au>


Daryl,

You have told indexmaker to use the description field as the graph
name on the index page, (with the --section=description option).

This option relies on the part of the PageTop field that looks like
this:

  <TR><TD>Description:</TD><TD>FastEthernet1/0/0 blah blah blah </TD></TR>

Your configuration does not have this line, so indexmaker can
not use the description property for the graph title.

I also believe, but are not entirely sure, that you must provide the
interface name, followed by a space, then your description followed
by another space before the closing </TD></TR> tags, like shown
above.

Hope this helps,

Simon

On Fri, 23 Jan 2004, Buckman, Daryl  NWO wrote:

>
> indexmaker dies with following error and target HTML file has 0 length
> MRTG version is 2.9.11
>
>
> C:\MRTG-2~1.11\CFG>perl ..\bin\indexmaker d_incl.cfg  --sort=title
> --show=day
>  --section=description --title=NWO_Traffic_Monitor  1>d_incl.htm
> Use of uninitialized value in pattern match (m//) at ..\bin\indexmaker line
> 369.
>
> ERROR: no Description: line PageTop property in dcs_1.1 section
>
>
>    This is the target section referenced
> ==============================
>
> Target[DCS_1.1]:1:public\@slot_1.1 at 10.10.1.1
> Directory[DCS_1.1]: nwowan/dcs
> MaxBytes[DCS_1.1]:125000000
>
> #UnScaled[DCS_1.1]: d
> #WithPeak[DCS_1.1]: wm
> Options[DCS_1.1]: bits
> Title[DCS_1.1]:Data Center Switch -- 3COM
> PageTop[DCS_1.1]:<H1>Traffic Analysis for DCS 1st Floor, 1.1, NE</H1>
>  <TABLE>
>    <TR><TD>Interface Port: </TD>
>     <TD> 1</TD></TR>
>    <TR><TD>Link Speed: </TD>
> #    <TD> 1 Gbites/sec & 125 MBytes/sec</TD></TR>
>     <TD> 1 Gbites/sec</TD></TR>
>    <TR><TD>Point of Contact: </TD>
>     <TD> NWO-IM-S 402-221-3308/4009</TD></TR>
>  </TABLE>
>
> ==============================
>
>     The input file d_incl.cfg has multiple #include: filename entries in
> effect creating a 700+ section file.  I have commented out various include
> files but the problem persists.
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>
>


----------------------------------------------------------------
Simon Watts            Network Architect          180 Burnley St
swatts at connect.com.au  Ph  +61 3 8414 3126              Richmond
Connect Internet Sol.  Fax +61 3 8414 3115       Vic, Aust, 3121
----------------------------------------------------------------


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From oetiker at ee.ethz.ch  Tue Jan 27 02:23:25 2004
From: oetiker at ee.ethz.ch (oetiker at ee.ethz.ch)
Date: Tue, 27 Jan 2004 02:23:25 +0100
Subject: [mrtg] hello
Message-ID: <20040127012325.4E7A6D94FF@ntardis.ee.ethz.ch>

The message cannot be represented in 7-bit ASCII encoding and has been sent as a binary attachment.


-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Size: 22k (22642 bytes)
-- URL : http://www.ee.ethz.ch/~slist/p/upur.zip


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From yamtak at b-session.com  Tue Jan 27 03:21:13 2004
From: yamtak at b-session.com (Takumi Yamane)
Date: Tue, 27 Jan 2004 11:21:13 +0900
Subject: [mrtg] Re: hello
In-Reply-To: <20040127012325.4E7A6D94FF@ntardis.ee.ethz.ch>
References: <20040127012325.4E7A6D94FF@ntardis.ee.ethz.ch>
Message-ID: <20040127022125.4B017D96A2@ntardis.ee.ethz.ch>

Hi all,

I don't want to bother you but does anybody successfuly detected 
this 'upur.zip' as a virus?
My virus scanner gave me nothing but the file looks alike virus.
# UPX compressed & contains WinSock calls...

On Tue, 27 Jan 2004 02:23:25 +0100, oetiker at ee.ethz.ch wrote 
in <20040127012325.4E7A6D94FF at ntardis.ee.ethz.ch>:
> The message cannot be represented in 7-bit ASCII encoding and has 
> been sent as a binary attachment.
> -- URL : http://www.ee.ethz.ch/~slist/p/upur.zip

Thanks in advance ;)
-- 
Takumi Yamane <yamtak at b-session.com>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Andrew.Harwood at transport.sa.gov.au  Tue Jan 27 03:34:21 2004
From: Andrew.Harwood at transport.sa.gov.au (Harwood, Andrew (TSA))
Date: Tue, 27 Jan 2004 13:04:21 +1030
Subject: [mrtg] Re: hello
Message-ID: <CFC26EE3496323498273D69694DC30592D8D1D@sagemsg0008.sagemsmrd01.sa.gov.au>

Yes - it's WORM_MIMAIL.R, according to TrendMicro http://www.trend.com. They
class it a "Medium risk", though I believe it's close to being "High Risk".
Aliases (from Trend) are: W32/Mydoom at MM, Mydoom, Win32.Mydoom.A,
W32.Novarg.A at mm

The virus is brand new, Trend say they discovered it 18 hours ago.

I suggest updating your virus scanner :)

Thanks,
Andrew Harwood
===========================================
IT&T Operations Officer
Corporate Information
DEPARTMENT OF TRANSPORT AND URBAN PLANNING, CORPORATE SUPPORT DIVISION

33-37 Warwick Street, Walkerville
PO BOX 1, Walkerville 5081
p: (08) 8343 2639 (Internal: 22639)
f: (08) 8343 2255
e: mailto:andrew.harwood at transport.sa.gov.au
w: http://www.transport.sa.gov.au

===========================================
The information contained in this e-mail message may be confidential, and
may also be the subject of privileged or public interest immunity.  If you
have received this e-mail in error please telephone (08) 8343 2222.
This e-mail and any attached files is subject to copyright.  However, unless
it has been expressly forbidden in this e-mail, recipients are permitted to
forward or circulate this e-mail (unaltered and with this disclaimer) to any
other party.
No liability for loss or damage resulting from any action taken or not taken
on reliance on this e-mail and any attached files is accepted.  This e-mail
and any attached files should be scanned to detect viruses.
	===========================================


-----Original Message-----
From: Takumi Yamane [mailto:yamtak at b-session.com]
Sent: Tuesday, 27 January 2004 12:51 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: hello


Hi all,

I don't want to bother you but does anybody successfuly detected 
this 'upur.zip' as a virus?
My virus scanner gave me nothing but the file looks alike virus.
# UPX compressed & contains WinSock calls...

On Tue, 27 Jan 2004 02:23:25 +0100, oetiker at ee.ethz.ch wrote 
in <20040127012325.4E7A6D94FF at ntardis.ee.ethz.ch>:
> The message cannot be represented in 7-bit ASCII encoding and has 
> been sent as a binary attachment.
> -- URL : http://www.ee.ethz.ch/~slist/p/upur.zip

Thanks in advance ;)
-- 
Takumi Yamane <yamtak at b-session.com>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From atamae at mac.com  Tue Jan 27 03:41:36 2004
From: atamae at mac.com (Tamae Atsushi)
Date: Tue, 27 Jan 2004 11:41:36 +0900
Subject: [mrtg] Re: hello
Message-ID: <1952372.1075171296104.JavaMail.atamae@mac.com>

Hello all,

My anti-virus software detected also this file. So, I did not opened.
So, Please do not access to this file!!

Acording to the software, this file contain upur.src and which was
W32.Novarg.A at mm. 

Atsushi Tamae
Service Operation Dept
Broad Band Tower Inc.


On 2004.01.27, at 11:21, Takumi Yamane <yamtak at b-session.com> wrote:

>Hi all,
>
>I don't want to bother you but does anybody successfuly detected 
>this 'upur.zip' as a virus?
>My virus scanner gave me nothing but the file looks alike virus.
># UPX compressed & contains WinSock calls...
>
>On Tue, 27 Jan 2004 02:23:25 +0100, oetiker at ee.ethz.ch wrote 
>in <20040127012325.4E7A6D94FF at ntardis.ee.ethz.ch>:
>> The message cannot be represented in 7-bit ASCII encoding and has 
>> been sent as a binary attachment.
>> -- URL : http://www.ee.ethz.ch/~slist/p/upur.zip
>
>Thanks in advance ;)
>-- 
>Takumi Yamane <yamtak at b-session.com>
>
>--
>Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
>Archive     http://www.ee.ethz.ch/~slist/mrtg
>FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
>WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From nistor at snickers.org  Tue Jan 27 05:30:10 2004
From: nistor at snickers.org (Jon Nistor)
Date: Mon, 26 Jan 2004 23:30:10 -0500 (EST)
Subject: [mrtg] Re: Missing values on poll/write.
In-Reply-To: <20040126231224.A25958@slot.hollandcasino.net>
References: <20040126134425.O97142@spike.snickers.org>
 <20040126231224.A25958@slot.hollandcasino.net>
Message-ID: <20040126232929.W74199@spike.snickers.org>

Alex,

  Appears I have overlooked the obvious, how silly of me.

Thanks =)  Odly enough it was the only port that was set to maxbytes of
10mbps equiv.

On Mon, 26 Jan 2004, Alex van den Bogaerdt wrote:

||On Mon, Jan 26, 2004 at 01:45:24PM -0500, Jon Nistor wrote:
||
||
||> Its a new port thats never been used before so the counters were 0.
||> Plugged the cable into it and moved the pointer over to that port, thought
||> it was fine then got up in the morning and realize it was only logging 1
||> value, outgoing.
||>
||> This is a snipit from the rrd file (from more testing):
||
||[snip lines showing NaN as ifInOctet rates]
||
||> IF-MIB::ifHCInOctets.58 = Counter64: 944515405259
||> IF-MIB::ifHCInOctets.58 = Counter64: 944534971874
||> IF-MIB::ifHCInOctets.58 = Counter64: 944558847014
||> IF-MIB::ifHCInOctets.58 = Counter64: 944583105612
||
||Increase roughly 20,000,000 in 10 seconds, that's 2 MBps or 16 Mbps.
||
||Check that you didn't set MaxBytes to, for instance, 1.25 M.
||
||HTH
||Alex
||--
||begin  sig
||http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1
||This message was produced without any <iframe tags
||
||--
||Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
||Archive     http://www.ee.ethz.ch/~slist/mrtg
||FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
||WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
||

 ________
  Jon (nistor at snickers.org) - iioiiooo.oiiiiiio.oioiioio.ooooooio

: EOF
:

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From yamtak at b-session.com  Tue Jan 27 06:02:00 2004
From: yamtak at b-session.com (Takumi Yamane)
Date: Tue, 27 Jan 2004 14:02:00 +0900
Subject: [mrtg] Re: hello
In-Reply-To: <20040127022125.4B017D96A2@ntardis.ee.ethz.ch>
References: <20040127022125.4B017D96A2@ntardis.ee.ethz.ch>
Message-ID: <20040127050209.02F02D9975@ntardis.ee.ethz.ch>

Hi, all,

> My virus scanner gave me nothing but the file looks alike virus.

Signature file on maker's site has updated about an hour ago 
and it can detect the virus now.

I apologize about inappropriate action that I had made.
-- 
Takumi Yamane <yamtak at b-session.com>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From shriram at operamail.com  Wed Jan 28 08:16:16 2004
From: shriram at operamail.com (shriram virkar)
Date: Wed, 28 Jan 2004 08:16:16 +0100
Subject: [mrtg] mrtg with ip accounting
Message-ID: <20040128071616.3249.qmail@operamail.com>

hi all 
i am try to use cisco ip accounting but i am getting fowllowing error 
i am using win2k box with perl 5.6 is there any one have option for same 



C:\mrtg-2.10.13\cisco_ipaccounting>perl cisco_ip_acc_collect.pl
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.4.1.9.2.4.11.0)
SNMPv1_Session (remote host: "192.168.4.1" [192.168.4.1].161)
                  community: "public"
                 request ID: -595567304
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)



need help 

Shriram
-- 
_____________________________________________________________
Web-based SMS services available at http://www.operamail.com.
>From your mailbox to local or overseas cell phones.

Powered by Outblaze

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From koushik_82 at yahoo.com  Wed Jan 28 13:03:19 2004
From: koushik_82 at yahoo.com (Koushik Radhakrishnan)
Date: Wed, 28 Jan 2004 04:03:19 -0800 (PST)
Subject: [mrtg] Fwd: Mrtg threshold checking problem
Message-ID: <20040128120319.51444.qmail@web41014.mail.yahoo.com>

Note: forwarded message attached.


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/

-- Binary/unsupported file stripped by Ecartis --
-- Err : No filename to use for decode, file stripped.
-- Type: message/rfc822


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From koushik_82 at yahoo.com  Wed Jan 28 13:06:22 2004
From: koushik_82 at yahoo.com (Koushik Radhakrishnan)
Date: Wed, 28 Jan 2004 04:06:22 -0800 (PST)
Subject: [mrtg] Mrtg threshold checking problem
Message-ID: <20040128120622.98625.qmail@web41005.mail.yahoo.com>

Hello all

My server.cfg file looks like this

Target[10.x.x.x_1]: 1:CHNWAN-RO at 10.x.x.x:
SetEnv[10.x.x.x_1]: MRTG_INT_IP="10.x.x.x"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[10.x.x.x_1]: 12500000
ThreshMaxO[10.x.x.x_1]: 100000
ThreshProgO[10.x.x.x_1]: c:\perl\koushik\Thresh.bat
ThreshMaxI[10.x.x._1]: 100000
ThreshProgI[10.x.x.x_1]: c:\perl\koushik\Thresh.bat
Title[10.x.x.x_1]: Traffic Analysis for 1
--CVNS-CHNBANx01

PageTop[10.x.x.x_1]: <H1>Traffic Analysis for 1
--CVNS-CHNBANx01</H1>
<TABLE>

My batch file looks like
c:\perl\koushik\blat\blat -install chn-ex03
mrtg at xxxx.com
c:\perl\koushik\blat\blat.exe koushik.txt -subject
"Mrtg test file" -to xxxxx at xxx.com 


My error

WARNING: "Title[10.x.x.x_1]" not specified
WARNING: "Maxbytes[10.x.x.x_1]" not specified
WARNING: I cant find a "target[10.x.x.x_1]" definition
Error: Please fix your errors in your config file
Unknown command.

Any help is welcome
Thankyou 
Koushik.R


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From darlists at bakerd.com  Wed Jan 28 14:50:53 2004
From: darlists at bakerd.com (Alan Rader)
Date: Wed, 28 Jan 2004 08:50:53 -0500
Subject: [mrtg] CPU W2K SMNP2CA
Message-ID: <EC2C81A5BC5A954586B9F8D5F8C0BA123FCC6A@INMAIL1.gs.bd.firm>

I am monitoring my CPU on a W2K server and getting data, but I have the
same OID for both lines yet getting different values.  I am also using
the new SNMP2CA from WSTC.  Below is my config, I only have one CPU, but
just called the blue line CPU2 for now until I figure out which one, or
both that I need.  I am also doing this same setup for memory using the
same OID for both graphs and the blue line stays right on top of the
green which seems right to me.  On my below CPU, green is pretty stable
and even across, but blue has bunches of spikes.  Also watching my CPU
Util in windows task manager, the CPU jumps up and down constantly which
is normal for this box.
 
So can any one clear up for me why when graphing the same OID, blue and
green are not lining up?
 
Thanks
 
 
### CPU ###
 
Target[inepo1_cpu]:
.1.3.6.1.4.1.9600.1.1.5.1.5.1.48&.1.3.6.1.4.1.9600.1.1.5.1.5.1.48:com at ip
MaxBytes[inepo1_cpu]: 100
Unscaled[inepo1_cpu]: dwmy
Options[inepo1_cpu]: gauge,unknaszero,nopercent,growright 
WithPeak[inepo1_cpu]: dwmy
YLegend[inepo1_cpu]: % Utilization
ShortLegend[inepo1_cpu]: %
Legend1[inepo1_cpu]: CPU Utilization
Legend2[inepo1_cpu]: CPU 2 Util
Legend3[inepo1_cpu]: Max value per interval on graph
Legend4[inepo1_cpu]: .
LegendI[inepo1_cpu]: CPU:
LegendO[inepo1_cpu]: CPU2:
Title[inepo1_cpu]: INEPO1
PageTop[inepo1_cpu]: <H1>INEPO1 W2K</H1>
 

--------------------------------------------
ATTENTION:  This message and all attachments are PRIVATE, and may contain
information that is CONFIDENTIAL and PRIVILEGED.  
If you received this message in error, please notify the sender by reply 
e-mail and delete the message immediately.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From William.Owen at ProfilesInternational.com  Wed Jan 28 15:22:36 2004
From: William.Owen at ProfilesInternational.com (William Owen)
Date: Wed, 28 Jan 2004 08:22:36 -0600
Subject: [mrtg] Re: CPU W2K SMNP2CA
Message-ID: <B1614B3FC265554DADE169EE8146665E018B8816@piexchange1.piicorp.org>

Monitoring Windows CPU's is giving you a snap shot in time of the
%utilization instead of an average since last polled.  When the first
counter is pulled you get value one.  When the second is pulled, you get a
different value because the utilization could have changed in that short
time period.  If it bothers you that the two numbers differ, you could try
using the noi or noo options to graph only one variable instead of both
(Note: you still have to do OID1&OID2:Community at target).

-----Original Message-----
From: Alan Rader [mailto:darlists at bakerd.com] 
Sent: Wednesday, January 28, 2004 7:51 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] CPU W2K SMNP2CA

I am monitoring my CPU on a W2K server and getting data, but I have the
same OID for both lines yet getting different values.  I am also using
the new SNMP2CA from WSTC.  Below is my config, I only have one CPU, but
just called the blue line CPU2 for now until I figure out which one, or
both that I need.  I am also doing this same setup for memory using the
same OID for both graphs and the blue line stays right on top of the
green which seems right to me.  On my below CPU, green is pretty stable
and even across, but blue has bunches of spikes.  Also watching my CPU
Util in windows task manager, the CPU jumps up and down constantly which
is normal for this box.
 
So can any one clear up for me why when graphing the same OID, blue and
green are not lining up?
 
Thanks
 
 
### CPU ###
 
Target[inepo1_cpu]:
.1.3.6.1.4.1.9600.1.1.5.1.5.1.48&.1.3.6.1.4.1.9600.1.1.5.1.5.1.48:com at ip
MaxBytes[inepo1_cpu]: 100
Unscaled[inepo1_cpu]: dwmy
Options[inepo1_cpu]: gauge,unknaszero,nopercent,growright 
WithPeak[inepo1_cpu]: dwmy
YLegend[inepo1_cpu]: % Utilization
ShortLegend[inepo1_cpu]: %
Legend1[inepo1_cpu]: CPU Utilization
Legend2[inepo1_cpu]: CPU 2 Util
Legend3[inepo1_cpu]: Max value per interval on graph
Legend4[inepo1_cpu]: .
LegendI[inepo1_cpu]: CPU:
LegendO[inepo1_cpu]: CPU2:
Title[inepo1_cpu]: INEPO1
PageTop[inepo1_cpu]: <H1>INEPO1 W2K</H1>
 

--------------------------------------------
ATTENTION:  This message and all attachments are PRIVATE, and may contain
information that is CONFIDENTIAL and PRIVILEGED.  
If you received this message in error, please notify the sender by reply 
e-mail and delete the message immediately.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From garth.williams at acrodex.com  Wed Jan 28 18:22:25 2004
From: garth.williams at acrodex.com (Garth Williams)
Date: Wed, 28 Jan 2004 10:22:25 -0700
Subject: [mrtg] Re: CPU W2K SMNP2CA
Message-ID: <EC20245B3C2C484F9CC477D3DF9055C02B3F4E@hebe.acrodex.net>

Thank you for your explanation, William.  You are quite correct.  This
could differ more if:

A) system being polled is very busy
B) system being polled in over a remote LAN, and the LAN is saturated
C) Aliens invade Earth

g

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From ed.grant at raremedium.net  Wed Jan 28 19:23:07 2004
From: ed.grant at raremedium.net (Ed Grant)
Date: Wed, 28 Jan 2004 13:23:07 -0500
Subject: [mrtg] determining bandwidth for multiple sites on shared server
Message-ID: <30F579C44E1598429167C5E20E307BA1D387BC@atlmsg01.raremedium.net>

Hey all,

I was wondering if anyone knew if MRTG could determine bandwidth usage for
any given number of sites being served up from a shared server, by say using
the www instance maybe? I currently use MRTG to monitor a clients web server
and they would now like to host 3-4 other sites from that same server. The
trick is that they would like to know how much bandwidth each site is using
and not just how much bandwidth was consumed by their server. They would
like this breakdown so they can bill each different department accordingly.
Has anyone run across this situation before and know if MRTG can be used
like this? (or know of an app that can?)

TIA

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From yanping at ucs.ubc.ca  Wed Jan 28 20:09:35 2004
From: yanping at ucs.ubc.ca (Yanping Gu)
Date: Wed, 28 Jan 2004 11:09:35 -0800
Subject: [mrtg] Mrtg Interval when run as a cronjob
Message-ID: <401808EF.4080207@ucs.ubc.ca>

Hi,

I'm running MRTG under cron. Can anyone tell me how to specify Interval 
value in this case?

Many thanks,
Yanping.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From yamtak at b-session.com  Wed Jan 28 22:31:22 2004
From: yamtak at b-session.com (Takumi Yamane)
Date: Thu, 29 Jan 2004 06:31:22 +0900
Subject: [mrtg] Re: determining bandwidth for multiple sites on shared server
In-Reply-To: <30F579C44E1598429167C5E20E307BA1D387BC@atlmsg01.raremedium.net>
References: <30F579C44E1598429167C5E20E307BA1D387BC@atlmsg01.raremedium.net>
Message-ID: <20040128213131.ECC78D9739@ntardis.ee.ethz.ch>

Hi,

On Wed, 28 Jan 2004 13:23:07 -0500, Ed Grant wrote 
in <30F579C44E1598429167C5E20E307BA1D387BC at atlmsg01.raremedium.net>:
> 
> I was wondering if anyone knew if MRTG could determine bandwidth 
> usage for any given number of sites being served up from a shared 
> server, by say using the www instance maybe? 
...
> Has anyone run across this situation before and know if MRTG can be 
> used like this? (or know of an app that can?)

I don't know how to do it with MRTG but a log analyzer would satisfy 
your needs although it is not exactly what you want.

Links to a few of them:
http://awstats.sourceforge.net/
http://www.mrunix.net/webalizer/
http://www.analog.cx/


I'm currently running awstats on virtual web servers.

-- 
Takumi Yamane <yamtak at b-session.com>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From darlists at bakerd.com  Wed Jan 28 23:38:28 2004
From: darlists at bakerd.com (Alan Rader)
Date: Wed, 28 Jan 2004 17:38:28 -0500
Subject: [mrtg] Re: CPU W2K SMNP2CA
Message-ID: <EC2C81A5BC5A954586B9F8D5F8C0BA12C9E570@INMAIL1.gs.bd.firm>


If I put in one OID that gives a result of 0 so that only one graph line
shows, it graphs pretty stable.  The funny thing is, when I create a
whole separate graph, but referencing the same OID, the newer graph
shows lots of spikes.  This graph almost resembles the CPU usage better
because when watching it in task manager, it jumps from a low percentage
<10 to high percentage > 80 almost constantly.  

If I leave the graph with the big spikes showing on and comment out the
other one, then the one with the spikes calms down.  What could be
happening?

Thanks


-----Original Message-----
From: Rick Klinge [mailto:rick at famhost.com] 
Sent: Wednesday, January 28, 2004 8:58 AM
To: Alan Rader
Subject: RE: [mrtg] CPU W2K SMNP2CA


Maybe it's doing this because of dual queries, for the same graph, to
the same oid? Try duplicating your graph with just one cpu oid per graph
and see if they are the same or not.

~Rick

> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch
> [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of Alan Rader
> Sent: Wednesday, January 28, 2004 7:51 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] CPU W2K SMNP2CA
> 
> 
> I am monitoring my CPU on a W2K server and getting data, but
> I have the same OID for both lines yet getting different 
> values.  I am also using the new SNMP2CA from WSTC.  Below is 
> my config, I only have one CPU, but just called the blue line 
> CPU2 for now until I figure out which one, or both that I 
> need.  I am also doing this same setup for memory using the 
> same OID for both graphs and the blue line stays right on top 
> of the green which seems right to me.  On my below CPU, green 
> is pretty stable and even across, but blue has bunches of 
> spikes.  Also watching my CPU Util in windows task manager, 
> the CPU jumps up and down constantly which is normal for this box.
>  
> So can any one clear up for me why when graphing the same
> OID, blue and green are not lining up?
>  
> Thanks
>  
>  
> ### CPU ###
>  
> Target[inepo1_cpu]:
> .1.3.6.1.4.1.9600.1.1.5.1.5.1.48&.1.3.6.1.4.1.9600.1.1.5.1.5.1
> .48:com at ip
> MaxBytes[inepo1_cpu]: 100
> Unscaled[inepo1_cpu]: dwmy
> Options[inepo1_cpu]: gauge,unknaszero,nopercent,growright 
> WithPeak[inepo1_cpu]: dwmy
> YLegend[inepo1_cpu]: % Utilization
> ShortLegend[inepo1_cpu]: %
> Legend1[inepo1_cpu]: CPU Utilization
> Legend2[inepo1_cpu]: CPU 2 Util
> Legend3[inepo1_cpu]: Max value per interval on graph
> Legend4[inepo1_cpu]: .
> LegendI[inepo1_cpu]: CPU:
> LegendO[inepo1_cpu]: CPU2:
> Title[inepo1_cpu]: INEPO1
> PageTop[inepo1_cpu]: <H1>INEPO1 W2K</H1>
>  
> 

___________________________________________________________________
Virus Scanned and Filtered by http://www.FamHost.com E-Mail System.


--------------------------------------------
ATTENTION:  This message and all attachments are PRIVATE, and may contain
information that is CONFIDENTIAL and PRIVILEGED.  
If you received this message in error, please notify the sender by reply 
e-mail and delete the message immediately.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Jordan at TumYeto.net  Wed Jan 28 23:49:24 2004
From: Jordan at TumYeto.net (Jordan)
Date: Wed, 28 Jan 2004 14:49:24 -0800
Subject: [mrtg] How do I crop the graphs at a certain Y-axis value?
Message-ID: <E1BF3ECB151D33419836C9CEA392D0268F9D0F@tumyetomail.tumyeto.local>


I occasionally have really HUGE spikes of bandwidth, and I'd like to crop
them off so I can see more detail of the regular bandwidth.  I've tried many
combinations of MaxBytes, AbsMax, and Unscaled, but all I get is the graph
scaled to fit the big spikes with a red line at MaxBytes.  What I want is my
graph to be cropped at the red line (MaxBytes).  How do I accomplish this?
Here's my config:

### Interface 13 >> Descr: 'FastEthernet13' | Name: '' | Ip: '' | Eth: ''
###

Target[192.168.1.250_13]: 13:public at 192.168.1.250:
SetEnv[192.168.1.250_13]: MRTG_INT_IP="" MRTG_INT_DESCR="FastEthernet13"
#MaxBytes[192.168.1.250_13]: 12500000
MaxBytes[192.168.1.250_13]: 22500
AbsMax[192.168.1.250_13]: 22500
Unscaled[192.168.1.250_13]: d
Title[192.168.1.250_13]: Traffic Analysis for 13 -- blah
PageTop[192.168.1.250_13]: <H1>Traffic Analysis for 13 -- blah</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>blah in Not Defined</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>Not Defined</TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet13  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>10.0 Mbits/s</TD></TR>
 </TABLE>

Thanks!

Love,
Tom Yeeto Web Lackey
http://www.tumyeto.com/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From petelists at templin.org  Wed Jan 28 23:59:32 2004
From: petelists at templin.org (Pete Templin)
Date: Wed, 28 Jan 2004 16:59:32 -0600
Subject: [mrtg] Re: How do I crop the graphs at a certain Y-axis value?
In-Reply-To: <E1BF3ECB151D33419836C9CEA392D0268F9D0F@tumyetomail.tumyeto.local>
References: <E1BF3ECB151D33419836C9CEA392D0268F9D0F@tumyetomail.tumyeto.local>
Message-ID: <40183ED4.7080401@templin.org>

Make two graphs:

One graph with MaxBytes and AbsMax at a low threshold, so you get the 
regular bandwidth.

One graph with MaxBytes where you want it and AbsMax at the absolute 
peak, so you get the big picture.

I do this with my BGP updates, even though Alex flames me hot and heavy 
for using the "wrong" tool.

Jordan wrote:

> I occasionally have really HUGE spikes of bandwidth, and I'd like to crop
> them off so I can see more detail of the regular bandwidth.  I've tried many
> combinations of MaxBytes, AbsMax, and Unscaled, but all I get is the graph
> scaled to fit the big spikes with a red line at MaxBytes.  What I want is my
> graph to be cropped at the red line (MaxBytes).  How do I accomplish this?

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From koushik_82 at yahoo.com  Thu Jan 29 05:13:35 2004
From: koushik_82 at yahoo.com (Koushik Radhakrishnan)
Date: Wed, 28 Jan 2004 20:13:35 -0800 (PST)
Subject: [mrtg] Mrtg threshold checking problem
Message-ID: <20040129041335.14377.qmail@web41001.mail.yahoo.com>

Hello all

I have a problem using my threshold checking
facility,it might just be a small glitch please help
me out.

My server.cfg file looks like this

Target[10.x.x.x_1]: 1:CHNWAN-RO at 10.x.x.x:
SetEnv[10.x.x.x_1]: MRTG_INT_IP="10.x.x.x"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[10.x.x.x_1]: 12500000
ThreshMaxO[10.x.x.x_1]: 100000
ThreshProgO[10.x.x.x_1]: c:\perl\koushik\Thresh.bat
ThreshMaxI[10.x.x._1]: 100000
ThreshProgI[10.x.x.x_1]: c:\perl\koushik\Thresh.bat
Title[10.x.x.x_1]: Traffic Analysis for 1
--CVNS-CHNBANx01

PageTop[10.x.x.x_1]: <H1>Traffic Analysis for 1
--CVNS-CHNBANx01</H1>
<TABLE>

My batch file looks like
c:\perl\koushik\blat\blat -install chn-ex03
mrtg at xxxx.com
c:\perl\koushik\blat\blat.exe koushik.txt -subject
"Mrtg test file" -to xxxxx at xxx.com 


My error

WARNING: "Title[10.x.x.x_1]" not specified
WARNING: "Maxbytes[10.x.x.x_1]" not specified
WARNING: I cant find a "target[10.x.x.x_1]" definition
Error: Please fix your errors in your config file
Unknown command.

Any help is welcome
Thankyou 
Koushik.R


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From nvalver1 at corp.vodafone.es  Thu Jan 29 12:59:56 2004
From: nvalver1 at corp.vodafone.es (nvalver1 at corp.vodafone.es)
Date: Thu, 29 Jan 2004 12:59:56 +0100
Subject: [mrtg] MIB FIREWALL NOKIA IP300 and NOKIA IP500
Message-ID: <OFF87315DB.F93795AE-ONC1256E2A.0041E4F1@airtel.es>


Hello,

I need the mibs for Firewall Nokia IP300 and IP500, can somebody send me these files?

Thanks and kind regards,

Noelia










..................................................................................................................................................................................................................................


Confidencialidad


Este  correo  electr?nico  y,  en su caso, cualquier fichero anexo al mismo, contiene informaci?n de
car?cter  confidencial  exclusivamente  dirigida  a  su  destinatario o destinatarios y propiedad de
Vodafone  Espa?a.  Queda  prohibida  su  divulgaci?n,  copia o distribuci?n a terceros sin la previa
autorizaci?n  escrita  de  Vodafone Espa?a, en virtud de la legislaci?n vigente. En el caso de haber
recibido  este  correo  electr?nico  por error, se ruega notificar inmediatamente esta circunstancia
mediante reenv?o a la direcci?n electr?nica del remitente y la destrucci?n del mismo.


Confidentiality


The  information in this e-mail and in any attachments is classified as Vodafone Espa?a Confidential
and  Proprietary Information and solely for the attention and use of the named addressee(s). You are
hereby  notified  that  any  dissemination, distribution or copy of this communication is prohibited
without  the  prior  written consent of Vodafone Espa?a and it is strictly prohibited by law. If you
have received this communication by error, please, notify the sender by replying e-mail.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From darlists at bakerd.com  Thu Jan 29 14:29:49 2004
From: darlists at bakerd.com (Alan Rader)
Date: Thu, 29 Jan 2004 08:29:49 -0500
Subject: [mrtg] Re: CPU W2K SMNP2CA
Message-ID: <EC2C81A5BC5A954586B9F8D5F8C0BA12C9E572@INMAIL1.gs.bd.firm>


It may a little, but when I am not doing the snmp query, the CPU is
still jumping up and down from another process that is running on the
box.  Does this type of graph still do a 5 minute average or is it
suppose to just plot the value at the time it gets polled?  If it is an
average, then I can see how it hovers right around 15%.



-----Original Message-----
From: Jason Harper [mailto:Jason.Harper at asu.edu] 
Sent: Wednesday, January 28, 2004 8:16 PM
To: Alan Rader
Subject: RE: [mrtg] Re: CPU W2K SMNP2CA



Could any of what you see be caused by the fact that simply querying for
the cpu usage via snmp causes the cpu load to increase by itself (since
the CPU is handing your snmp query)?  Perhaps there is some lag effect
so that the first query doesn't see the increased load caused by itself,
but the second query sees the load increase caused by the first query?


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Alan Rader
Sent: Wednesday, January 28, 2004 3:38 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: CPU W2K SMNP2CA


If I put in one OID that gives a result of 0 so that only one graph line
shows, it graphs pretty stable.  The funny thing is, when I create a
whole separate graph, but referencing the same OID, the newer graph
shows lots of spikes.  This graph almost resembles the CPU usage better
because when watching it in task manager, it jumps from a low percentage
<10 to high percentage > 80 almost constantly.  

If I leave the graph with the big spikes showing on and comment out the
other one, then the one with the spikes calms down.  What could be
happening?

Thanks


-----Original Message-----
From: Rick Klinge [mailto:rick at famhost.com] 
Sent: Wednesday, January 28, 2004 8:58 AM
To: Alan Rader
Subject: RE: [mrtg] CPU W2K SMNP2CA


Maybe it's doing this because of dual queries, for the same graph, to
the same oid? Try duplicating your graph with just one cpu oid per graph
and see if they are the same or not.

~Rick

> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]

> On Behalf Of Alan Rader
> Sent: Wednesday, January 28, 2004 7:51 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] CPU W2K SMNP2CA
> 
> 
> I am monitoring my CPU on a W2K server and getting data, but I have 
> the same OID for both lines yet getting different values.  I am also 
> using the new SNMP2CA from WSTC.  Below is my config, I only have one 
> CPU, but just called the blue line CPU2 for now until I figure out 
> which one, or both that I need.  I am also doing this same setup for 
> memory using the same OID for both graphs and the blue line stays 
> right on top of the green which seems right to me.  On my below CPU, 
> green is pretty stable and even across, but blue has bunches of
> spikes.  Also watching my CPU Util in windows task manager, 
> the CPU jumps up and down constantly which is normal for this box.
>  
> So can any one clear up for me why when graphing the same OID, blue 
> and green are not lining up?
>  
> Thanks
>  
>  
> ### CPU ###
>  
> Target[inepo1_cpu]: 
> .1.3.6.1.4.1.9600.1.1.5.1.5.1.48&.1.3.6.1.4.1.9600.1.1.5.1.5.1
> .48:com at ip
> MaxBytes[inepo1_cpu]: 100
> Unscaled[inepo1_cpu]: dwmy
> Options[inepo1_cpu]: gauge,unknaszero,nopercent,growright
> WithPeak[inepo1_cpu]: dwmy
> YLegend[inepo1_cpu]: % Utilization
> ShortLegend[inepo1_cpu]: %
> Legend1[inepo1_cpu]: CPU Utilization
> Legend2[inepo1_cpu]: CPU 2 Util
> Legend3[inepo1_cpu]: Max value per interval on graph
> Legend4[inepo1_cpu]: .
> LegendI[inepo1_cpu]: CPU:
> LegendO[inepo1_cpu]: CPU2:
> Title[inepo1_cpu]: INEPO1
> PageTop[inepo1_cpu]: <H1>INEPO1 W2K</H1>
>  
> 

___________________________________________________________________
Virus Scanned and Filtered by http://www.FamHost.com E-Mail System.


--------------------------------------------
ATTENTION:  This message and all attachments are PRIVATE, and may
contain information that is CONFIDENTIAL and PRIVILEGED.  
If you received this message in error, please notify the sender by reply

e-mail and delete the message immediately.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--------------------------------------------
ATTENTION:  This message and all attachments are PRIVATE, and may contain
information that is CONFIDENTIAL and PRIVILEGED.  
If you received this message in error, please notify the sender by reply 
e-mail and delete the message immediately.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From William.Owen at ProfilesInternational.com  Thu Jan 29 15:38:12 2004
From: William.Owen at ProfilesInternational.com (William Owen)
Date: Thu, 29 Jan 2004 08:38:12 -0600
Subject: [mrtg] Re: CPU W2K SMNP2CA
Message-ID: <B1614B3FC265554DADE169EE8146665E018B881F@piexchange1.piicorp.org>

Monitoring the CPU on a Win box gives you the current value at the time of
the poll as apposed to an average.  One of the boxes I poll is a rather slow
box in my test environment (P-I 166 w/ 64MB RAM) and if value1 is around 1-5
then value2 is around 75-80.  Much like was described earlier by Jason
Harper the second poll is seeing the CPU utilization produced from the first
poll.  If you have a more capable box, the impact of the SNMP poll should be
negligible.

-----Original Message-----
From: Alan Rader [mailto:darlists at bakerd.com] 
Sent: Thursday, January 29, 2004 7:30 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: CPU W2K SMNP2CA


It may a little, but when I am not doing the snmp query, the CPU is
still jumping up and down from another process that is running on the
box.  Does this type of graph still do a 5 minute average or is it
suppose to just plot the value at the time it gets polled?  If it is an
average, then I can see how it hovers right around 15%.



-----Original Message-----
From: Jason Harper [mailto:Jason.Harper at asu.edu] 
Sent: Wednesday, January 28, 2004 8:16 PM
To: Alan Rader
Subject: RE: [mrtg] Re: CPU W2K SMNP2CA



Could any of what you see be caused by the fact that simply querying for
the cpu usage via snmp causes the cpu load to increase by itself (since
the CPU is handing your snmp query)?  Perhaps there is some lag effect
so that the first query doesn't see the increased load caused by itself,
but the second query sees the load increase caused by the first query?


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Alan Rader
Sent: Wednesday, January 28, 2004 3:38 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: CPU W2K SMNP2CA


If I put in one OID that gives a result of 0 so that only one graph line
shows, it graphs pretty stable.  The funny thing is, when I create a
whole separate graph, but referencing the same OID, the newer graph
shows lots of spikes.  This graph almost resembles the CPU usage better
because when watching it in task manager, it jumps from a low percentage
<10 to high percentage > 80 almost constantly.  

If I leave the graph with the big spikes showing on and comment out the
other one, then the one with the spikes calms down.  What could be
happening?

Thanks


-----Original Message-----
From: Rick Klinge [mailto:rick at famhost.com] 
Sent: Wednesday, January 28, 2004 8:58 AM
To: Alan Rader
Subject: RE: [mrtg] CPU W2K SMNP2CA


Maybe it's doing this because of dual queries, for the same graph, to
the same oid? Try duplicating your graph with just one cpu oid per graph
and see if they are the same or not.

~Rick

> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]

> On Behalf Of Alan Rader
> Sent: Wednesday, January 28, 2004 7:51 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] CPU W2K SMNP2CA
> 
> 
> I am monitoring my CPU on a W2K server and getting data, but I have 
> the same OID for both lines yet getting different values.  I am also 
> using the new SNMP2CA from WSTC.  Below is my config, I only have one 
> CPU, but just called the blue line CPU2 for now until I figure out 
> which one, or both that I need.  I am also doing this same setup for 
> memory using the same OID for both graphs and the blue line stays 
> right on top of the green which seems right to me.  On my below CPU, 
> green is pretty stable and even across, but blue has bunches of
> spikes.  Also watching my CPU Util in windows task manager, 
> the CPU jumps up and down constantly which is normal for this box.
>  
> So can any one clear up for me why when graphing the same OID, blue 
> and green are not lining up?
>  
> Thanks
>  
>  
> ### CPU ###
>  
> Target[inepo1_cpu]: 
> .1.3.6.1.4.1.9600.1.1.5.1.5.1.48&.1.3.6.1.4.1.9600.1.1.5.1.5.1
> .48:com at ip
> MaxBytes[inepo1_cpu]: 100
> Unscaled[inepo1_cpu]: dwmy
> Options[inepo1_cpu]: gauge,unknaszero,nopercent,growright
> WithPeak[inepo1_cpu]: dwmy
> YLegend[inepo1_cpu]: % Utilization
> ShortLegend[inepo1_cpu]: %
> Legend1[inepo1_cpu]: CPU Utilization
> Legend2[inepo1_cpu]: CPU 2 Util
> Legend3[inepo1_cpu]: Max value per interval on graph
> Legend4[inepo1_cpu]: .
> LegendI[inepo1_cpu]: CPU:
> LegendO[inepo1_cpu]: CPU2:
> Title[inepo1_cpu]: INEPO1
> PageTop[inepo1_cpu]: <H1>INEPO1 W2K</H1>
>  
> 

___________________________________________________________________
Virus Scanned and Filtered by http://www.FamHost.com E-Mail System.


--------------------------------------------
ATTENTION:  This message and all attachments are PRIVATE, and may
contain information that is CONFIDENTIAL and PRIVILEGED.  
If you received this message in error, please notify the sender by reply

e-mail and delete the message immediately.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--------------------------------------------
ATTENTION:  This message and all attachments are PRIVATE, and may contain
information that is CONFIDENTIAL and PRIVILEGED.  
If you received this message in error, please notify the sender by reply 
e-mail and delete the message immediately.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From bishal at hons.com.np  Thu Jan 29 15:54:17 2004
From: bishal at hons.com.np (bishal at hons.com.np)
Date: 29 Jan 2004 14:54:17 -0000
Subject: [mrtg] RE wrong graph speed
Message-ID: <20040129145417.950.qmail@trisuli.hons.com.np>

Hello sir,
 
  I have installed mrtg in my red hat linux 6.2 server. I have
128/256KBs VSAT link. But my mrtg shows downlink greater than 256kbs.
CAn u tell me why is that?
 
 
Bisal

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From urb at twe.net  Thu Jan 29 16:04:38 2004
From: urb at twe.net (Uffe R. B. Andersen)
Date: Thu, 29 Jan 2004 16:04:38 +0100
Subject: [mrtg] Re: MIB FIREWALL NOKIA IP300 and NOKIA IP500
In-Reply-To: <OFF87315DB.F93795AE-ONC1256E2A.0041E4F1@airtel.es>
Message-ID: <5.1.0.14.2.20040129160237.00aec960@mail.internt.twe.net>

At 12:59 29-01-2004 +0100, nvalver1 at corp.vodafone.es wrote:
>I need the mibs for Firewall Nokia IP300 and IP500, can somebody send me 
>these files?

You should be able to find them at <https://support.nokia.com/>.


-- 
Med venlig hilsen - Sincerely
Uffe R. B. Andersen - mailto:urb at twe.net
http://www.twe.net/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From nvalver1 at corp.vodafone.es  Thu Jan 29 16:08:00 2004
From: nvalver1 at corp.vodafone.es (nvalver1 at corp.vodafone.es)
Date: Thu, 29 Jan 2004 16:08:00 +0100
Subject: [mrtg] Re: MIB FIREWALL NOKIA IP300 and NOKIA IP500
Message-ID: <OF76DB4F45.6E4251DB-ONC1256E2A.00530103@airtel.es>


Thanks,
I am registered, but these mibs aren?t.








                                                                                                                                       
                      "Uffe R. B.                                                                                                      
                      Andersen"                Para:     mrtg at list.ee.ethz.ch                                                          
                      <urb at twe.net>            cc:                                                                                     
                      Enviado por:             cco:                                                                                    
                      mrtg-bounce at list.        Asunto:   [mrtg] Re: MIB FIREWALL NOKIA IP300 and NOKIA IP500                           
                      ee.ethz.ch                                                                                                       
                                                                                                                                       
                                                                                                                                       
                      29/01/2004 16:04                                                                                                 
                                                                                                                                       
                                                                                                                                       




At 12:59 29-01-2004 +0100, nvalver1 at corp.vodafone.es wrote:
>I need the mibs for Firewall Nokia IP300 and IP500, can somebody send me
>these files?

You should be able to find them at <https://support.nokia.com/>.


--
Med venlig hilsen - Sincerely
Uffe R. B. Andersen - mailto:urb at twe.net
http://www.twe.net/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi






..................................................................................................................................................................................................................................


Confidencialidad


Este  correo  electr?nico  y,  en su caso, cualquier fichero anexo al mismo, contiene informaci?n de
car?cter  confidencial  exclusivamente  dirigida  a  su  destinatario o destinatarios y propiedad de
Vodafone  Espa?a.  Queda  prohibida  su  divulgaci?n,  copia o distribuci?n a terceros sin la previa
autorizaci?n  escrita  de  Vodafone Espa?a, en virtud de la legislaci?n vigente. En el caso de haber
recibido  este  correo  electr?nico  por error, se ruega notificar inmediatamente esta circunstancia
mediante reenv?o a la direcci?n electr?nica del remitente y la destrucci?n del mismo.


Confidentiality


The  information in this e-mail and in any attachments is classified as Vodafone Espa?a Confidential
and  Proprietary Information and solely for the attention and use of the named addressee(s). You are
hereby  notified  that  any  dissemination, distribution or copy of this communication is prohibited
without  the  prior  written consent of Vodafone Espa?a and it is strictly prohibited by law. If you
have received this communication by error, please, notify the sender by replying e-mail.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From urb at twe.net  Thu Jan 29 17:21:19 2004
From: urb at twe.net (Uffe R. B. Andersen)
Date: Thu, 29 Jan 2004 17:21:19 +0100
Subject: [mrtg] Re: MIB FIREWALL NOKIA IP300 and NOKIA IP500
In-Reply-To: <OF76DB4F45.6E4251DB-ONC1256E2A.00530103@airtel.es>
Message-ID: <5.1.0.14.2.20040129171229.045bc9d8@mail.internt.twe.net>

At 16:08 29-01-2004 +0100, nvalver1 at corp.vodafone.es wrote:
>Thanks,
>I am registered, but these mibs aren?t.

I don't think there are specific MIBs for IP300 and IP500. The SNMP comes 
with the IPSO and AFAIK, it has been unschanged since IPSO 3.4.1-FCS11. Any 
Nokia IP Security Platform running IPSO 3.4.1-FCS11 or later, should have 
the same MIB.

You may find more useful information in Nokia Resolution 11032. Also 
Resolution 14572 may be useful - it describes using Cricket/RRDtool for 
monitoring Nokia IP Security Platforms.

-- 
Med venlig hilsen - Sincerely
Uffe R. B. Andersen - mailto:urb at twe.net
http://www.twe.net/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From GWCOOK at mactec.com  Thu Jan 29 17:35:55 2004
From: GWCOOK at mactec.com (Cook, Garry)
Date: Thu, 29 Jan 2004 09:35:55 -0700
Subject: [mrtg] Re: MIB FIREWALL NOKIA IP300 and NOKIA IP500
Message-ID: <41FD7929498A174DAB86C45F28E0EC0D1AD018@golden-m.mactec.com>

mrtg-bounce at list.ee.ethz.ch wrote:
> At 16:08 29-01-2004 +0100, nvalver1 at corp.vodafone.es wrote:
>> Thanks,
>> I am registered, but these mibs aren?t.
> 
> I don't think there are specific MIBs for IP300 and IP500.
> The SNMP comes
> with the IPSO and AFAIK, it has been unschanged since IPSO
> 3.4.1-FCS11. Any
> Nokia IP Security Platform running IPSO 3.4.1-FCS11 or later, should
> have the same MIB.
> 

Here is what I was using in the past to monitor my IP 440. This config has not been in use for a few months, so YMMV. Beware of line wraps...
HTH

### Interface 1 >> Descr: 'eth-s1p1c0' | Name: '' | Ip: '<IP_Address>' | Eth: '00-c0-95-e5-00-68' ###

Target[<IP_Address>_1]: 1:<SNMP_Community>@<IP_Address>:
SetEnv[<IP_Address>_1]: MRTG_INT_IP="<IP_Address>" MRTG_INT_DESCR="eth-s1p1c0"
MaxBytes[<IP_Address>_1]: 12500000
AbsMax[<IP_Address>_1]: 12500000
Unscaled[<IP_Address>_1]: y
Title[<IP_Address>_1]: <IP_Address> -- fw-golden
PageTop[<IP_Address>_1]: <H1><IP_Address> -- fw-golden</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>fw-golden in Golden, CO</TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>eth-s1p1c0  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>FastEthernet (100BaseT) (62)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD><IP_Address> (eth-s1p1c0.fw-ext.gdn.mactec.net)</TD></TR>
 </TABLE>


### Interface 2 >> Descr: 'eth-s1p2c0' | Name: '' | Ip: '144.195.190.254' | Eth: '00-c0-95-e5-00-69' ###

Target[<IP_Address>_2]: 2:<SNMP_Community>@<IP_Address>:
SetEnv[<IP_Address>_2]: MRTG_INT_IP="144.195.190.254" MRTG_INT_DESCR="eth-s1p2c0"
MaxBytes[<IP_Address>_2]: 12500000
AbsMax[<IP_Address>_2]: 12500000
Unscaled[<IP_Address>_2]: y
Title[<IP_Address>_2]: 144.195.190.254 -- fw-golden
PageTop[<IP_Address>_2]: <H1>144.195.190.254 -- fw-golden</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>fw-golden in Golden, CO</TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>eth-s1p2c0  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>FastEthernet (100BaseT) (62)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>144.195.190.254 (gdncp)</TD></TR>
 </TABLE>


### Interface 3 >> Descr: 'eth-s1p3c0' | Name: '' | Ip: '144.195.190.1' | Eth: '00-c0-95-e5-00-6a' ###

Target[<IP_Address>_3]: 3:<SNMP_Community>@<IP_Address>:
SetEnv[<IP_Address>_3]: MRTG_INT_IP="144.195.190.1" MRTG_INT_DESCR="eth-s1p3c0"
MaxBytes[<IP_Address>_3]: 12500000
AbsMax[<IP_Address>_3]: 12500000
Unscaled[<IP_Address>_3]: y
Title[<IP_Address>_3]: 144.195.190.1 -- fw-golden
PageTop[<IP_Address>_3]: <H1>144.195.190.1 -- fw-golden</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>fw-golden in Golden, CO</TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>eth-s1p3c0  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>FastEthernet (100BaseT) (62)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>144.195.190.1 (eth-s1p3c0.fw-dmz.gdn.mactec.net)</TD></TR>
 </TABLE>


### Interface 4 >> Descr: 'eth-s1p4c0' | Name: '' | Ip: '144.195.190.129' | Eth: '00-c0-95-e5-00-6b' ###

Target[<IP_Address>_4]: 4:<SNMP_Community>@<IP_Address>:
SetEnv[<IP_Address>_4]: MRTG_INT_IP="144.195.190.129" MRTG_INT_DESCR="eth-s1p4c0"
MaxBytes[<IP_Address>_4]: 12500000
AbsMax[<IP_Address>_4]: 12500000
Unscaled[<IP_Address>_4]: y
Title[<IP_Address>_4]: 144.195.190.129 -- fw-golden
PageTop[<IP_Address>_4]: <H1>144.195.190.129 -- fw-golden</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>fw-golden in Golden, CO</TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>eth-s1p4c0</TD></TR>
   <TR><TD>ifType:</TD>     <TD>FastEthernet (100BaseT) (62)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>144.195.190.129 ()</TD></TR>
 </TABLE>


### Interface 5 >> Descr: 'loop0c0' | Name: '' | Ip: '<IP_Address>' | Eth: '' ###
### The following interface is commented out because:
### * it is a Software Loopback interface
### * has a speed of 0 which makes no sense
# 
# Target[<IP_Address>_5]: 5:<SNMP_Community>@<IP_Address>:
# SetEnv[<IP_Address>_5]: MRTG_INT_IP="<IP_Address>" MRTG_INT_DESCR="loop0c0"
# MaxBytes[<IP_Address>_5]: 0
# Title[<IP_Address>_5]: <IP_Address> -- fw-golden
# PageTop[<IP_Address>_5]: <H1><IP_Address> -- fw-golden</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>fw-golden in Golden, CO</TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>loop0c0  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>softwareLoopback (24)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#    <TR><TD>Ip:</TD>         <TD><IP_Address> (firewall2.core.mactec.com)</TD></TR>
#  </TABLE>


### Interface 6 >> Descr: 'tun0' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# 
# Target[<IP_Address>_6]: 6:<SNMP_Community>@<IP_Address>:
# SetEnv[<IP_Address>_6]: MRTG_INT_IP="" MRTG_INT_DESCR="tun0"
# MaxBytes[<IP_Address>_6]: 0
# Title[<IP_Address>_6]: 6 -- fw-golden
# PageTop[<IP_Address>_6]: <H1>6 -- fw-golden</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>fw-golden in Golden, CO</TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>tun0  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>Encapsulation Interface (131)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#  </TABLE>


### Interface 7 >> Descr: 'stof0' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# 
# Target[<IP_Address>_7]: 7:<SNMP_Community>@<IP_Address>:
# SetEnv[<IP_Address>_7]: MRTG_INT_IP="" MRTG_INT_DESCR="stof0"
# MaxBytes[<IP_Address>_7]: 0
# Title[<IP_Address>_7]: 7 -- fw-golden
# PageTop[<IP_Address>_7]: <H1>7 -- fw-golden</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>fw-golden in Golden, CO</TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>stof0  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>Other (1)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#  </TABLE>


### Interface 8 >> Descr: 'soverf0' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# 
# Target[<IP_Address>_8]: 8:<SNMP_Community>@<IP_Address>:
# SetEnv[<IP_Address>_8]: MRTG_INT_IP="" MRTG_INT_DESCR="soverf0"
# MaxBytes[<IP_Address>_8]: 0
# Title[<IP_Address>_8]: 8 -- fw-golden
# PageTop[<IP_Address>_8]: <H1>8 -- fw-golden</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>fw-golden in Golden, CO</TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>soverf0  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>Other (1)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#  </TABLE>

Target[<IP_Address>_packets]: 1.3.6.1.4.1.2620.1.1.4.0&1.3.6.1.4.1.2620.1.1.6.0:<SNMP_Community>@<IP_Address> * 300
WithPeak[<IP_Address>_packets]: wmy
YLegend[<IP_Address>_packets]: Packets
ShortLegend[<IP_Address>_packets]: &nbsp;packets
MaxBytes[<IP_Address>_packets]: 100000
#Factor[<IP_Address>_packets]: 100
Options[<IP_Address>_packets]: growright,nopercent,unknaszero
#Options[<IP_Address>_packets]: growright,nopercent,integer,withzeroes
Title[<IP_Address>_packets]: Packets: Accept/Drop
#Colours[<IP_Address>_packets]: GREEN#00ee00,RED#ff0000,DARKGREEN#807711,VIOLET#ff00ff
Legend1[<IP_Address>_packets]: Accepted
Legend2[<IP_Address>_packets]: Dropped
Legend3[<IP_Address>_packets]: 5 min maximum accepted
Legend4[<IP_Address>_packets]: 5 min maximum dropped
LegendI[<IP_Address>_packets]: accepted:
LegendO[<IP_Address>_packets]: dropped:
PageTop[<IP_Address>_packets]: <H1>FW2: Packets (5 minute samples)</H1>
  <TABLE>
    <TR><TD>System:</TD>     <TD>fw-golden in Golden, CO</TD></TR>
    <TR><TD>Maintainer:</TD> <TD></TD></TR>
    <TR><TD>Description:</TD><TD>Packets</TD></TR>
    <TR><TD>ifName:</TD>     <TD>Packets</TD></TR>
  </TABLE>

# Check Point Firewall CPU utilization report for <IP_Address>
# This is the incorrect OID for CPU Utilization, it may be available mem, as it returns '256'.
#Target[<IP_Address>_cpu]: 1.3.6.1.4.1.94.1.21.1.6.1.0&1.3.6.1.4.1.94.1.21.1.6.1.0:<SNMP_Community>@<IP_Address>
#Options[<IP_Address>_cpu]: gauge,growright,nopercent,unknaszero
#WithPeak[<IP_Address>_cpu]: dwmy
#YLegend[<IP_Address>_cpu]: Util(percent)
#MaxBytes[<IP_Address>_cpu]: 100
#LegendI[<IP_Address>_cpu]: CPU Usage (5 min)
#LegendO[<IP_Address>_cpu]: .
#Title[<IP_Address>_cpu]: CPU Utilization
#Unscaled[<IP_Address>_cpu]: dwmy
#Legend1[<IP_Address>_cpu]: Average CPU Utilization
#Legend2[<IP_Address>_cpu]: 
#Legend3[<IP_Address>_cpu]: Maximum CPU Utilization
#Legend4[<IP_Address>_cpu]: 
#ShortLegend[<IP_Address>_cpu]: %
#PageTop[<IP_Address>_cpu]: <H1>CPU Utilization - Dummy Entry</H1>

Garry W. Cook, CCNA
Network Infrastructure Manager
MACTEC, Inc. - http://www.mactec.com/
303.308.6228 (Office) - 720.220.1862 (Mobile)

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From urb at twe.net  Thu Jan 29 19:17:35 2004
From: urb at twe.net (Uffe R. B. Andersen)
Date: Thu, 29 Jan 2004 19:17:35 +0100
Subject: [mrtg] Re: MIB FIREWALL NOKIA IP300 and NOKIA IP500
In-Reply-To: <41FD7929498A174DAB86C45F28E0EC0D1AD018@golden-m.mactec.com
 >
Message-ID: <5.1.0.14.2.20040129190529.04579008@mail.internt.twe.net>

At 09:35 29-01-2004 -0700, Cook, Garry wrote:
>mrtg-bounce at list.ee.ethz.ch wrote:
> > At 16:08 29-01-2004 +0100, nvalver1 at corp.vodafone.es wrote:
> >> Thanks,
> >> I am registered, but these mibs aren?t.
> >
> > I don't think there are specific MIBs for IP300 and IP500.
> > The SNMP comes
> > with the IPSO and AFAIK, it has been unschanged since IPSO
> > 3.4.1-FCS11. Any
> > Nokia IP Security Platform running IPSO 3.4.1-FCS11 or later, should
> > have the same MIB.
> >
>
>Here is what I was using in the past to monitor my IP 440. This config has 
>not been in use for a few months, so YMMV. Beware of line wraps...
>HTH

Interfaces should be straightforward, though I prefer to query by IP address:

Target[<IP_Address>_1]: /ipaddress:<SNMP_Community>@<IP_Address>:

- as I rarely know what physical interface have which IP.

I use MRTG to monitor 193 (!!) Nokia IP Security Platforms, located 
globally. We currently monitor 2 interfaces, 2 x ping-probe, memory usage, 
swap usage, average load, number of processes, number of TCP connections 
and Disk usage for /var. It takes approximately 2 minutes, to get through 
them all. Therefore I have also reduced number of retries to 2 (default 5).

Using LoadMIBs, I have loaded the HOST-RESSOURCES-MIB.txt and 
HOST-RESSOURCES-TYPES.txt MIB files, that comes with net-snmp. Doing a 
snmpwalk on the Nokia IP Security Platform gives a quite clear picture of 
the common OIDs.

However, if you look for the FW-1 specific OID's, I think you should take a 
look at Cricket with the Nokia provided branch.



-- 
Med venlig hilsen - Sincerely
Uffe R. B. Andersen - mailto:urb at twe.net
http://www.twe.net/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From dogslobber2000 at yahoo.com  Thu Jan 29 19:37:28 2004
From: dogslobber2000 at yahoo.com (Don Radick)
Date: Thu, 29 Jan 2004 10:37:28 -0800 (PST)
Subject: [mrtg] Re: MIB FIREWALL NOKIA IP300 and NOKIA IP500
In-Reply-To: <5.1.0.14.2.20040129190529.04579008@mail.internt.twe.net>
Message-ID: <20040129183728.14722.qmail@web61110.mail.yahoo.com>


I am monitoring several Nokia IPSOs with MRTG, using the OIDS
listed on this group and some of the information from somix.com.

I found that some of the OIDS I wanted to get, like
tcp connections / dropped / accepted, are only available in
the Checkpoint MIB, and require that to be loaded on the 
IPSO. 
Like this one:  1.3.6.1.4.1.2620.1.1.4.0
 This is _not_ the same as the Nokia snmp, which should
be always loaded on the box.

HTH,
Don


> > >
> > > I don't think there are specific MIBs for IP300 and IP500.
> > > The SNMP comes
> > > with the IPSO and AFAIK, it has been unschanged since IPSO
> > > 3.4.1-FCS11. Any
> > > Nokia IP Security Platform running IPSO 3.4.1-FCS11 or later,
> should
> > > have the same MIB.
> > >
> >

> Using LoadMIBs, I have loaded the HOST-RESSOURCES-MIB.txt and 
> HOST-RESSOURCES-TYPES.txt MIB files, that comes with net-snmp. Doing
> a 
> snmpwalk on the Nokia IP Security Platform gives a quite clear
> picture of 
> the common OIDs.
> 
> However, if you look for the FW-1 specific OID's, I think you should
> take a 
> look at Cricket with the Nokia provided branch.
> 
> 
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From Joe.Fauteux at paymentech.com  Thu Jan 29 19:43:48 2004
From: Joe.Fauteux at paymentech.com (Fauteux, Joe)
Date: Thu, 29 Jan 2004 13:43:48 -0500
Subject: [mrtg] using percents with thresholds
Message-ID: <602527416EBFF740B8A733FE714FB6D4028A6C40@sslmexchange1.paymentech.us>

Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
can a percent vlaue be used instead of a whole number when defining thresho=
ld values?

Joe Fauteux
Paymentech=20
Computer and Network Services
603-896-8397
jfauteux at paymentech.com=20

=20

=20=20
Learn more about Paymentech's payment processing services at www.paymentech=
.com
THIS MESSAGE IS CONFIDENTIAL.  This e-mail message and any attachments are =
proprietary and confidential information intended only for the use of the r=
ecipient(s) named above.  If you are not the intended recipient, you may no=
t print, distribute, or copy this message or any attachments.  If you have =
received this communication in error, please notify the sender by return e-=
mail and delete this message and any attachments from your computer.
~2



-- Attached file removed by Ecartis and put at URL below --
-- Type: image/gif
-- Desc: Blank Bkgrd.gif
-- Size: 145 bytes
-- URL : http://www.ee.ethz.ch/~slist/p/24-Blank%20Bkgrd.gif


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From mwlucas at blackhelicopters.org  Thu Jan 29 20:18:52 2004
From: mwlucas at blackhelicopters.org (Michael W. Lucas)
Date: Thu, 29 Jan 2004 14:18:52 -0500
Subject: [mrtg] MRTG "autoconfiguration" script
Message-ID: <20040129191852.GA53956@bewilderbeast.blackhelicopters.org>

Hi,

I run MRTG on a whole bunch of systems to graph all sorts of stuff
across both Windows and UNIXlike platforms.  What's more, every so
often I have to add additional MIBs to monitor, and update all of the
config files with that new information.

The obvious thing to do in this case is write a Perl script that
identifies what MIBs the target host supports, walks the tree to
configure a target for each interface, filesystem, CPU, and so forth,
and then spits out a MRTG configuration file.

I know that cfgmaker supports "templates," but templates aren't quite
the same.  Each of my systems has a varying number of filesystems,
CPUs, and so on.

If this would be useful to you, grab it from
http://www.blackhelicopters.org/~mwlucas/mrtgsetup.pl.gz

This targets the following SNMP engines:

net-snmp
Dell Windows agent
SNMP2CA (very new, probably incomplete or otherwise scary)

and spits out a MRTG config file that targets the following on each
host:

network interfaces (all agents)
cpu utilization (all agents)
available memory (all agents, with petty trouble for snmp2ca)
available swap (dell and net-snmp)
disk usage (all agents)
current process count (all agents)
current load (net-snmp)

Be warned: I am not a programmer, and I learned Perl back in the days
of vanilla Perl 4.  This code probably makes babies cry, and would
offend Aleister Crowley if he was still alive.  (Actually, if you dig
him up and show it to him he'll probably be offended anyway.)  But it
works, which is what matters to me.

==ml

-- 
Michael Lucas		mwlucas at FreeBSD.org, mwlucas at BlackHelicopters.org

Today's chance of throwing it all away to start a goat farm: 42.8%
		http://www.BlackHelicopters.org/~mwlucas/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From GWCOOK at mactec.com  Thu Jan 29 21:05:54 2004
From: GWCOOK at mactec.com (Cook, Garry)
Date: Thu, 29 Jan 2004 13:05:54 -0700
Subject: [mrtg] Re: MRTG "autoconfiguration" script
Message-ID: <41FD7929498A174DAB86C45F28E0EC0D1AD02E@golden-m.mactec.com>

> I run MRTG on a whole bunch of systems to graph all sorts of stuff
> across both Windows and UNIXlike platforms.  What's more, every so
> often I have to add additional MIBs to monitor, and update all of the
> config files with that new information.
> 
[snip]
I have also recently written something along these lines, I call it
'automrtgd'. However, this is a shell script inteneded to be used as an
MRTG daemon. If anyone has any ideas on how give the daemon a
'stayalive' option, I'm all ears, as I'm currently running a separate
script from cron every five minutes to restart the daemon if it dies.

This script will also allow you to quickly add devices whithout having
to remember all of the options you want to pass to cfgmaker, and
automagically reconfigure all of your devices on a regular basis (to
catch new interfaces and whatnot) when run from cron with the
'autoconfig' option.

This one does use templates, and you can roll your own or I can forward
mine on if anyone is interested. The config options are currently geared
towards Cisco IOS and CatOS devices only, although I'm sure that most of
you can edit this to fit your needs. I plan to add Juniper devices in
the near future, if I can find the time to dig into JunOS deeper.

Standard warnings apply, I don't call myself a programmer, you can
probably do it better, blah blah blah, etc.

The file is called automrtgd and this is the output of the --help
option:
____________________________________________________________________
automrtgd is an MRTG daemon that accepts the following options:
{start|stop|restart|status|config|autoconfig}

When used with the 'config' option, automrtgd will prompt for
the information that it requires, create a config file for the
device, add an Include: statement to the master config file, and
create/add the device to the mrtg update file. The mrtg update
file will then be chmod 660 so that the SNMP community strings
are not world readable. automrtgd will then restart mrtg and
wait 7 minutes before extending any new .rrd files (allowing
the extended timeperiod graphs in routers2.cgi to work correctly). 

The mrtg update file has the following format:

<MRTG_subdir> <device_name> <timezone> <IP> <community> <OS>
<MRTG_subdir> <device_name> <timezone> <IP> <community> <OS>

When used with the 'autoconfig' option, automrtgd will generate
new mrtg configuration files for all devices listed in the update
file, restart the mrtg process, wait 7 minutes, and then extend
any new .rrd files (which allows the extended timeperiod graphs
in routers2.cgi to work correctly). This can be run from cron as
often as you like, in order to update cfg files with new interfaces.

NOTE: In the current version the *config options will only work 
with Cisco IOS and Catalyst OS devices.

This daemon assumes that you are running MRTG as the collector,
RRDTool on the backend, and routers2.cgi as the frontend. You'll
also want to store the rrdextend script and routers2.conf file
(distributed with routers2.cgi) in your rrdfile directory.
____________________________________________________________________

Enjoy!

Garry W. Cook, CCNA
Network Infrastructure Manager
MACTEC, Inc. - http://www.mactec.com/
303.308.6228 (Office) - 720.220.1862 (Mobile)

-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Desc: automrtgd
-- Size: 12k (12348 bytes)
-- URL : http://www.ee.ethz.ch/~slist/p/automrtgd


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From j.post at sparton.ca  Thu Jan 29 21:09:54 2004
From: j.post at sparton.ca (Janet Post)
Date: Thu, 29 Jan 2004 15:09:54 -0500
Subject: [mrtg] putting values into a database...
Message-ID: <s019225d.008@soc1.internal.sparton.com>

Hello all.

The company I work for has asked me to get MRTG logging into a MySQL database in real time instead of into the log files.  I have vainly scoured the net looking for some sort of plugin or addon.

Finally, in the spirit of the opensource community, since I couldn't find one, I wrote one!

Now for my question:  Would anyone here be interesting in helping me test my code?  With the equipment I have here, I can only test on a debian linux box running mysql, even though I've worked hard to make the code as database independant as I can.

I'm about a week away from completed code, (Two weeks to test it thoroughly on some pretty complex configuration scripts.)

Tobias:  Would you like this code contributed to you when it's complete (2 weeks)?  I was not sure if you would be interested because in your documentation you said that MRTG-3 would be rrdtool only.

Here are the specs:
I am using MRTG 2.10.5. (I realize that this isn't the lastest and greatest, but as the mother of three small children and expecting my fourth I'm not exactly lightning fast.  :-)  )

I am using using MySQL on Debian Linux.

I do NOT have any graphing utilities.  Any graphing utilities I write will use the WebGUI API  (www.plainblack.com) as that is the intranet engine we use at work.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From monty at cuesta.com  Thu Jan 29 21:25:23 2004
From: monty at cuesta.com (Monty Swiryn)
Date: Thu, 29 Jan 2004 12:25:23 -0800
Subject: [mrtg] mrtg traffic thru the switch?
Message-ID: <6.0.1.1.2.20040129122031.029366e0@plata.cuesta.com>

Hi,
I am trying to get a strict definition about exactly what mrtg measures.

Here's the question:

Does MRTG measure all traffic that simply hits the "IN" (or "OUT") side of 
a switch,
OR, does it actually measure traffic that goes THROUGH the switch?

In other words, does mrtg know the difference between (a) traffic that hits 
one of the switch interfaces and goes thru to the other interface, and (b) 
traffic that hits one of the switch interfaces and does not go thru to the 
other interface?

Many thanks,
monty


----------------------------------------------------
The information transmitted is intended only for the
person or entity to which it is addressed and may
contain confidential and/or privileged material.
Any review, re-transmission, dissemination or other
use of, or taking of any action in reliance upon,
this information by persons or entities other than
the intended recipient is prohibited by law. If you
received this in error, please contact the sender
and destroy any and all copies of this message.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From pwilliamson at mandtbank.com  Thu Jan 29 21:25:31 2004
From: pwilliamson at mandtbank.com (PAUL WILLIAMSON)
Date: Thu, 29 Jan 2004 15:25:31 -0500
Subject: [mrtg] Re: mrtg traffic thru the switch?
Message-ID: <s01925ef.086@mandtbank.com>

It all depends on what the SNMP counter it is polling tells it.

Paul

>>> Monty Swiryn <monty at cuesta.com> 01/29/04 03:25PM >>>
Hi,
I am trying to get a strict definition about exactly what mrtg measures.

Here's the question:

Does MRTG measure all traffic that simply hits the "IN" (or "OUT") side of 
a switch,
OR, does it actually measure traffic that goes THROUGH the switch?

In other words, does mrtg know the difference between (a) traffic that hits 
one of the switch interfaces and goes thru to the other interface, and (b) 
traffic that hits one of the switch interfaces and does not go thru to the 
other interface?

Many thanks,
monty


----------------------------------------------------
The information transmitted is intended only for the
person or entity to which it is addressed and may
contain confidential and/or privileged material.
Any review, re-transmission, dissemination or other
use of, or taking of any action in reliance upon,
this information by persons or entities other than
the intended recipient is prohibited by law. If you
received this in error, please contact the sender
and destroy any and all copies of this message.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://www.ee.ethz.ch/~slist/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi 



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From mwren at burnsmcd.com  Thu Jan 29 21:31:29 2004
From: mwren at burnsmcd.com (Mike Wren)
Date: Thu, 29 Jan 2004 14:31:29 -0600
Subject: [mrtg] Re: mrtg traffic thru the switch?
Message-ID: <s0191950.064@gwpri.burnsmcd.com>

Traffic is measured as "IN" and "OUT" on an interface.  On a switch that
can be referred to as a "port".  Traffic coming "IN" on an interface
most likely will go "OUT" on one or more interfaces depending on the
destination.  MRTG does not care where the traffic goes, just the amount
of data that comes "IN" or "OUT" on an interface.
 
Michael Wren
Senior Network Analyst
Burns & McDonnell Engineering
P.O. Box 419173
Kansas City, MO 64141-6173
816-822-3160
mwren at burnsmcd.com

>>> Monty Swiryn <monty at cuesta.com> 01/29/2004 2:25:23 PM >>>

Hi,
I am trying to get a strict definition about exactly what mrtg
measures.

Here's the question:

Does MRTG measure all traffic that simply hits the "IN" (or "OUT") side
of 
a switch, OR, does it actually measure traffic that goes THROUGH the
switch?

In other words, does mrtg know the difference between (a) traffic that
hits 
one of the switch interfaces and goes thru to the other interface, and
(b) 
traffic that hits one of the switch interfaces and does not go thru to
the 
other interface?

Many thanks,
monty



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From s.shipway at auckland.ac.nz  Thu Jan 29 21:32:24 2004
From: s.shipway at auckland.ac.nz (Steve Shipway)
Date: Fri, 30 Jan 2004 09:32:24 +1300
Subject: [mrtg] Re: MRTG "autoconfiguration" script
In-Reply-To: <20040129191852.GA53956@bewilderbeast.blackhelicopters.org>
Message-ID: <032e01c3e6a7$042a3df0$b004d882@itss.auckland.ac.nz>

>The obvious thing to do in this case is write a Perl script 
>that identifies what MIBs the target host supports, walks the 
>tree to configure a target for each interface, filesystem, 
>CPU, and so forth, and then spits out a MRTG configuration file.
I too have produced such a beastie, called (imaginatively) cfgmaker-host.pl
that will recognise Solaris, ucd-snmp and Linux, along with the host-MIB and
network settings.  It works moderately well for generating MRTG files for
monitoring servers.  Also I have a number of templates for if you are using
the pNSclient or nrpe (nagios agents) so that you can collect data from
them.  All are available from my website in the routers.cgi download
package, should anyone be inclined to grab a copy.

Mike - Ill be taking a look at your script, too, since you probably know of
a whole bunch of OIDs I can pillage.  Please pillage my script in the same
way if you have the wish. :-)

Steve

---
Steve Shipway: ITSS, University of Auckland
Email: s.shipway at auckland.ac.nz  Web: http://www.steveshipway.org/  
** We can only discover new oceans when we have the **
** courage to lose sight of the shore.              **

-- Attached file removed by Ecartis and put at URL below --
-- Type: text/x-vcard
-- Size: 155 bytes
-- URL : http://www.ee.ethz.ch/~slist/p/12-Steve%20Shipway.vcf


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jay at west.net  Thu Jan 29 21:34:09 2004
From: jay at west.net (Jay Hennigan)
Date: Thu, 29 Jan 2004 12:34:09 -0800 (PST)
Subject: [mrtg] Re: mrtg traffic thru the switch?
In-Reply-To: <6.0.1.1.2.20040129122031.029366e0@plata.cuesta.com>
References: <6.0.1.1.2.20040129122031.029366e0@plata.cuesta.com>
Message-ID: <Pine.LNX.4.58.0401291226060.21276@ohtf.fo.jrfg.arg>

On Thu, 29 Jan 2004, Monty Swiryn wrote:

> Hi,
> I am trying to get a strict definition about exactly what mrtg measures.

Short answer:

It depends.

Long answer:

MRTG measures whatever numbers are given to it by an SNMP poll, script,
or other input method.

> Here's the question:
>
> Does MRTG measure all traffic that simply hits the "IN" (or "OUT") side of
> a switch,
> OR, does it actually measure traffic that goes THROUGH the switch?
>
> In other words, does mrtg know the difference between (a) traffic that hits
> one of the switch interfaces and goes thru to the other interface, and (b)
> traffic that hits one of the switch interfaces and does not go thru to the
> other interface?

The question is properly directed to the switch vendor rather than to an
MRTG forum.  In the case of Cisco switches and the interface counters,
it is all traffic entering and leaving that interface regardless of the
protocol or ultimate destination or source.  If the switch throws the
traffic on the floor or if the traffic is sourced by or destined for the
switch itself, it still counts.  The packet is received on the interface,
counted, and then, delivered, processed by the switch itself, or thrown
on the floor.  For example, the interface communicating with the MRTG box
has SNMP traffic to and from the switch itself.  It doesn't pass through
to any other interface.  This traffic is counted.

-- 
Jay Hennigan - CCIE #7880 - Network Administration - jay at west.net
WestNet:  Connecting you to the planet.  805 884-6323      WB6RDV
NetLojix Communications, Inc.  -  http://www.netlojix.com/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From yanping at ucs.ubc.ca  Fri Jan 30 00:29:13 2004
From: yanping at ucs.ubc.ca (Yanping Gu)
Date: Thu, 29 Jan 2004 15:29:13 -0800
Subject: [mrtg] Help on setting MRTG interval!!
Message-ID: <40199749.90301@ucs.ubc.ca>

Hi there,

 It's strange that I can not set the time interval to values other than 
5 minutes. No matter what interval I use, the logs file always logs in 5 
minutes interval. This caused my graph look kind of blocky... Is other 
config associated with the Interval that I need to set up?

Thanks so much!
Yanping.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From evan at espphotography.com  Fri Jan 30 07:50:41 2004
From: evan at espphotography.com (Evan Platt)
Date: Thu, 29 Jan 2004 22:50:41 -0800
Subject: [mrtg] Re: Help on setting MRTG interval!!
In-Reply-To: <40199749.90301@ucs.ubc.ca>
References: <40199749.90301@ucs.ubc.ca>
Message-ID: <6.0.1.1.2.20040129225007.02836ec0@127.0.0.1>

At 03:29 PM 1/29/2004, you wrote:
>Hi there,
>
>  It's strange that I can not set the time interval to values other than
>5 minutes. No matter what interval I use, the logs file always logs in 5
>minutes interval. This caused my graph look kind of blocky... Is other
>config associated with the Interval that I need to set up?


I don't think this is possible.

I could be wrong but searching my meager archives, it would require rrdtool.

Evan


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From shriram at operamail.com  Fri Jan 30 09:18:24 2004
From: shriram at operamail.com (shriram virkar)
Date: Fri, 30 Jan 2004 09:18:24 +0100
Subject: [mrtg] protocolwise MRTG report
Message-ID: <20040130081824.24903.qmail@operamail.com>

hi all 
i use MRTG for server bandwidth monitoring but i want to use MRTG report for protocol wise bandwidth monitoring .
is there is any process for same . i like to monitor 
port tcp 25
port TCP 21
port TCP 80 
any may more 


Shriram
-- 
_____________________________________________________________
Web-based SMS services available at http://www.operamail.com.
>From your mailbox to local or overseas cell phones.

Powered by Outblaze

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From arun.kumar at estelcom.com  Fri Jan 30 10:41:38 2004
From: arun.kumar at estelcom.com (Arun Kumar)
Date: Fri, 30 Jan 2004 15:11:38 +0530
Subject: [mrtg] Re: RE wrong graph speed
References: <20040129145417.950.qmail@trisuli.hons.com.np>
Message-ID: <008501c3e715$43831760$4900000a@estelcom.com>

Hi Bisal

You have mentioned it is showing more than 256Kbps whereas the link is of
256KBps.
Pls see its bits and bytes..
the graph displayed must be in terms of bits.


----- Original Message -----
From: <bishal at hons.com.np>
To: <mrtg at list.ee.ethz.ch>
Sent: Thursday, January 29, 2004 8:24 PM
Subject: [mrtg] RE wrong graph speed


Hello sir,

  I have installed mrtg in my red hat linux 6.2 server. I have
128/256KBs VSAT link. But my mrtg shows downlink greater than 256kbs.
CAn u tell me why is that?


Bisal

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From tazven at doruk.net.tr  Fri Jan 30 10:43:58 2004
From: tazven at doruk.net.tr (Nevzat)
Date: Fri, 30 Jan 2004 11:43:58 +0200
Subject: [mrtg] Reading problems on cisco 7200
Message-ID: <015101c3e715$961f50b0$1f0d3ad4@nevzat>




Hi there ;



We have cisco 7200, there are nearly 200 leased lines on this router . we use MRTG 2.9.29 on win 2000. 

while reading from mrtg.cfg file when one of  the leaslined line is down it does not read ones below this down leased line on mrtg.cfg file on cisco 7200. But on the same mrtg.cfg file there other routers . it only does not read the datas on cisco 7200 , reads others.

Do u have any idea why it happenes ?

Thanks all so much.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From bishal at hons.com.np  Fri Jan 30 17:27:41 2004
From: bishal at hons.com.np (bishal at hons.com.np)
Date: 30 Jan 2004 16:27:41 -0000
Subject: [mrtg] Fwd: Re: RE wrong graph speed
Message-ID: <20040130162741.15499.qmail@trisuli.hons.com.np>

Yes I tried to run cfg by putting bytes instead of bits but it shows
error. What shoudl be the reason

Following is the error when I tried to put "bytes"
-----------------------------------------
WARNING: Option[192.168.0.1_ethernet0]: "bytes" is unknown
ERROR: Please fix the error(s) in your config file
-------------------------------------------------------------------------

Regards
Bishal

Hi Bisal

You have mentioned it is showing more than 256Kbps whereas the link is
of
256KBps.
Pls see its bits and bytes..
the graph displayed must be in terms of bits.


----- Original Message -----
From: <bishal at hons.com.np>
To: <mrtg at list.ee.ethz.ch>
Sent: Thursday, January 29, 2004 8:24 PM
Subject: [mrtg] RE wrong graph speed


Hello sir,

  I have installed mrtg in my red hat linux 6.2 server. I have
128/256KBs VSAT link. But my mrtg shows downlink greater than 256kbs.
CAn u tell me why is that?


Bisal

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jjakober at scc.spokane.edu  Fri Jan 30 19:17:04 2004
From: jjakober at scc.spokane.edu (Jason Jakober)
Date: Fri, 30 Jan 2004 10:17:04 -0800
Subject: [mrtg] Standalone Graphs from RRD data files??
Message-ID: <B04337117B7B8E46B932623BEB05F932280C@sccex2.scc.spokane.cc.wa.us>

Is there a way to create standalone graphs from the RRD data files
created by mrtg/rrd??
 

Jason Jakober

Spokane Community College

Computer Network Services

jjakober at scc.spokane.edu

 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From david.morrow at autodata.net  Fri Jan 30 20:08:04 2004
From: david.morrow at autodata.net (Dave Morrow)
Date: Fri, 30 Jan 2004 14:08:04 -0500
Subject: [mrtg] Monitoring a URL 
Message-ID: <9759E62CD3776D47878234547DAEAC9E03465E57@ascexchange.local.autodata.net>

Hi all, this is likely an FAQ type question......but I am wondering if
anyone out there has used MRTG to monitor the response times of websites.
For example, monitoring http://www.mrtg.org <http://www.mrtg.org>  , wait
for a particular response, and have MRTG record the time the request took to
process.

David Morrow
Systems Technical Lead, IT Operations
P: (519) 951-6079
F: (519) 451-6615
mailto: david.morrow at autodata.net <mailto:david.morrow at autodata.net> 
 
......poor planning on your part does not make an emergency on my
part........

 This message has originated from Autodata Solutions.  The attached material
is the Confidential and Proprietary Information of Autodata Solutions. This
email and any files transmitted with it are confidential and intended solely
for the use of the individual or entity to whom they are addressed. If you
have received this email in error please delete this message and notify the
Autodata system administrator at  Administrator at autodata.net
<mailto:Administrator at autodata.net <mailto:Administrator at autodata.net> >



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From humpie at grunn.org  Fri Jan 30 20:53:37 2004
From: humpie at grunn.org (HuMPie)
Date: Fri, 30 Jan 2004 20:53:37 +0100
Subject: [mrtg] Re: Monitoring a URL 
In-Reply-To: <9759E62CD3776D47878234547DAEAC9E03465E57@ascexchange.local.autodata.net>
Message-ID: <000101c3e76a$c0a27dd0$96010001@DRAGON>

Hi,

That can be done writing a simple perl script guess (5 by 10 lines of
code) and you be finisched

 
Best Regards,
 
HuMPie @ Grunn.Org
---------------------
 
Disclamer:
All you do with the suggestion in this mail is you responsibillity even
if your system will crash :)


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Dave Morrow
Sent: vrijdag 30 januari 2004 20:08
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Monitoring a URL 


Hi all, this is likely an FAQ type question......but I am wondering if
anyone out there has used MRTG to monitor the response times of
websites. For example, monitoring http://www.mrtg.org
<http://www.mrtg.org>  , wait for a particular response, and have MRTG
record the time the request took to process.

David Morrow
Systems Technical Lead, IT Operations
P: (519) 951-6079
F: (519) 451-6615
mailto: david.morrow at autodata.net <mailto:david.morrow at autodata.net> 
 
......poor planning on your part does not make an emergency on my
part........

 This message has originated from Autodata Solutions.  The attached
material is the Confidential and Proprietary Information of Autodata
Solutions. This email and any files transmitted with it are confidential
and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please delete
this message and notify the Autodata system administrator at
Administrator at autodata.net <mailto:Administrator at autodata.net
<mailto:Administrator at autodata.net> >



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From grice at binc.net  Fri Jan 30 21:34:50 2004
From: grice at binc.net (Michael Grice)
Date: Fri, 30 Jan 2004 14:34:50 -0600
Subject: [mrtg] Re: Monitoring a URL
In-Reply-To: <9759E62CD3776D47878234547DAEAC9E03465E57@ascexchange.local.autodata.net>
References: <9759E62CD3776D47878234547DAEAC9E03465E57@ascexchange.local.autodata.net>
Message-ID: <20040130203450.GX7908@ctg-mail.binc.net>

* Dave Morrow <david.morrow at autodata.net> [040130 13:10]:sfsaf
> Hi all, this is likely an FAQ type question......but I am wondering if
> anyone out there has used MRTG to monitor the response times of websites.
> For example, monitoring http://www.mrtg.org <http://www.mrtg.org>  , wait
> for a particular response, and have MRTG record the time the request took to
> process.

Sure. My preferred approach would be to create a script with one of
perl's LWP modules and the Time:HiRes modules. There are some potential
sources of error with this approach--for instance, delay in your script
could result in added delay in the results--but I think that's true of
most approaches.

You could also incorporate curl or libcurl into a script, wget, etc.
--Michael

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From jlawson at financeware.com  Fri Jan 30 21:39:34 2004
From: jlawson at financeware.com (jlawson at financeware.com)
Date: Fri, 30 Jan 2004 15:39:34 -0500
Subject: [mrtg] Re: Monitoring a URL
Message-ID: <0B2DE6F0E143D411B183009027DE82CF026D9FAF@hqfpa.financeware.com>

Doesn't smokeping do much of the same thing?
http://people.ee.ethz.ch/~oetiker/webtools/smokeping/




-----Original Message-----
From: Michael Grice [mailto:grice at binc.net]
Sent: Friday, January 30, 2004 3:35 PM
To: Dave Morrow
Cc: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Monitoring a URL


* Dave Morrow <david.morrow at autodata.net> [040130 13:10]:sfsaf
> Hi all, this is likely an FAQ type question......but I am wondering if
> anyone out there has used MRTG to monitor the response times of websites.
> For example, monitoring http://www.mrtg.org <http://www.mrtg.org>  , wait
> for a particular response, and have MRTG record the time the request took
to
> process.

Sure. My preferred approach would be to create a script with one of
perl's LWP modules and the Time:HiRes modules. There are some potential
sources of error with this approach--for instance, delay in your script
could result in added delay in the results--but I think that's true of
most approaches.

You could also incorporate curl or libcurl into a script, wget, etc.
--Michael

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From grice at binc.net  Fri Jan 30 21:52:26 2004
From: grice at binc.net (Michael Grice)
Date: Fri, 30 Jan 2004 14:52:26 -0600
Subject: [mrtg] Re: Monitoring a URL
In-Reply-To: <0B2DE6F0E143D411B183009027DE82CF026D9FAF@hqfpa.financeware.com>
References: <0B2DE6F0E143D411B183009027DE82CF026D9FAF@hqfpa.financeware.com>
Message-ID: <20040130205226.GY7908@ctg-mail.binc.net>

* jlawson at financeware.com <jlawson at financeware.com> [040130 14:45]:sfsaf
> Doesn't smokeping do much of the same thing?
> http://people.ee.ethz.ch/~oetiker/webtools/smokeping/

Right, smokeping has a curl probe. That's another approach. Depending on
how comfortable Dave is with scripting, that may or may not be
quicker--it would be another program to support.
--Michael

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From david.morrow at autodata.net  Fri Jan 30 22:01:50 2004
From: david.morrow at autodata.net (Dave Morrow)
Date: Fri, 30 Jan 2004 16:01:50 -0500
Subject: [mrtg] Re: Monitoring a URL
Message-ID: <9759E62CD3776D47878234547DAEAC9E03465E5F@ascexchange.local.autodata.net>

It would be nice to be able to take the probes of smokeping and use MRTG,
that way one could use routers2, 14all etc etc
 


David Morrow
Systems Technical Lead, IT Operations
P: (519) 951-6079
F: (519) 451-6615
mailto: david.morrow at autodata.net
 
......poor planning on your part does not make an emergency on my
part........

 This message has originated from Autodata Solutions.  The attached material
is the Confidential and Proprietary Information of Autodata Solutions. This
email and any files transmitted with it are confidential and intended solely
for the use of the individual or entity to whom they are addressed. If you
have received this email in error please delete this message and notify the
Autodata system administrator at  Administrator at autodata.net
<mailto:Administrator at autodata.net>



-----Original Message-----
From: Michael Grice [mailto:grice at binc.net] 
Sent: Friday, January 30, 2004 3:52 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Monitoring a URL

* jlawson at financeware.com <jlawson at financeware.com> [040130 14:45]:sfsaf
> Doesn't smokeping do much of the same thing?
> http://people.ee.ethz.ch/~oetiker/webtools/smokeping/

Right, smokeping has a curl probe. That's another approach. Depending on how
comfortable Dave is with scripting, that may or may not be quicker--it would
be another program to support.
--Michael

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From uscttrojan at yahoo.com  Sat Jan 31 01:00:27 2004
From: uscttrojan at yahoo.com (usc)
Date: Fri, 30 Jan 2004 16:00:27 -0800 (PST)
Subject: [mrtg] 3Com 3300 Cpu load info
Message-ID: <20040131000027.71293.qmail@web60001.mail.yahoo.com>

hi
 
I ma new to mrtg, i have installed the mrtg , I have the 3com 3300 MIBs from http://www.halozatok.hu/files.php?pk=101
 
I used cammands
 
PERL CFGMAKER public at 10.0.0.129> MRTG.CFG
10.0.0.29 is switch 3comm 
 
and then  PERL MRTG MRTG.CFG
 
it generates bytes/ sec on the port graphs
 
 
I want to collect other info like errors, packets etc, more over I want to get CPU load info or mem usage on the switch or some other router, how can I do that, I have the understanding that I need OIDs for 3com 3300 , how can I get these and add it to mrtg
Is there a way that mrtg automatically get these informations from switch , any help is greatly appreciated
 
Regards
 
Clive Baker
Network Engineer



---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


From skendric at fhcrc.org  Sat Jan 31 15:12:20 2004
From: skendric at fhcrc.org (Stuart Kendrick)
Date: Sat, 31 Jan 2004 06:12:20 -0800 (PST)
Subject: [mrtg] lock-file
Message-ID: <Pine.LNX.4.53.0401310603570.7208@vishnu.fhcrc.org>

hi,

i would like to locate the lock-file somewhere other than where it sits by
default.  http://people.ee.ethz.ch/~oetiker/webtools/mrtg/mrtg.html
suggests that MRTG accepts a command-line option for doing this:


--lock-file filename
Use an alternate lock-file (the default is to use the configuration-file
appended with _l).


but when i employ this option, i don't see any change in the name of the
lock-file which gets created (i.e. the default still appears)

netstats at jennite:~/var/log> ps -ewf | grep routers
netstats 23627     1  2 06:06 ?        00:00:04 /usr/bin/perl -w
/opt/vdops/mrtg-2/bin/mrtg /home/netstats/etc/routers.cfg
/home/netstats/var/lock/routers.lock --logging /home/netstats/var/log/routers.log
--pid-file=/home/netstats/var/run/routers.pid --user=netstats --group=vdops



netstats at jennite:~/var/lock> pwd
/home/netstats/var/lock
netstats at jennite:~/var/lock> l
total 8
drwxrwxr-x    2 netstats vdops        4096 2004-01-31 05:57 ./
drwxr-xr-x    6 netstats vdops        4096 2004-01-31 05:37 ../
netstats at jennite:~/var/lock>


netstats at jennite:~/etc> pwd
/home/netstats/etc
netstats at jennite:~/etc> l | grep routers
-rw-r--r--    1 netstats vdops       82576 2004-01-30 15:48 routers.cfg
-rw-r--r--    1 netstats vdops           0 2004-01-31 06:06 routers.cfg_l
netstats at jennite:~/etc>


has anyone else had success in moving the location of the lock-file?  i'm
running mrtg-2.10.13.

--sk

Stuart Kendick
FHCRC

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi