[mrtg] US Robotics router

[David Aragão]

Hello,

I have been trying to use mrtg with a broadband router without success.
When I use the cfgmaker I get a mrtg.cfg with the following message 
about speed beeing 0...

### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# Target[192.168.0.10_1]: 1:public at 192.168.0.10:
# SetEnv[192.168.0.10_1]: MRTG_INT_IP="" MRTG_INT_DESCR="Ethernet-WAN"
# MaxBytes[192.168.0.10_1]: 0
# Title[192.168.0.10_1]: Traffic Analysis for 1 --
# PageTop[192.168.0.10_1]: <H1>Traffic Analysis for 1 -- </H1>

and everything is commented out ??

The strange thing is that if I use :

snmpwalk -v 2c -c public 192.168.0.10

I get the following....

SNMPv2-MIB::sysDescr.0 = STRING: USR Broadband Router
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9086
SNMPv2-MIB::sysUpTime.0 = Timeticks: (818800) 2:16:28.00
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysName.0 = STRING:
SNMPv2-MIB::sysLocation.0 = STRING:
SNMPv2-MIB::sysServices.0 = INTEGER: 2
IF-MIB::ifNumber.0 = INTEGER: 1
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifDescr.1 = STRING: Ethernet-WAN
IF-MIB::ifType.1 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifMtu.1 = INTEGER: 1500
IF-MIB::ifSpeed.1 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING: 0:c0:49:d6:63:96
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifLastChange.1 = Timeticks: (818850) 2:16:28.50
IF-MIB::ifInOctets.1 = Counter32: 101351561
IF-MIB::ifInUcastPkts.1 = Counter32: 176856
IF-MIB::ifInNUcastPkts.1 = Counter32: 64796
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 42182219
IF-MIB::ifOutUcastPkts.1 = Counter32: 169410
IF-MIB::ifOutNUcastPkts.1 = Counter32: 19
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 16
IF-MIB::ifSpecific.1 = OID: ccitt
End of MIB


I have trying to read documentation but could fix the settings and have 
mrtg following the proper variables.... (trafic in and trafic out)

Can anyone give me any tip ?

David

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi