[mrtg] Re: US Robotics router

[Eric Brander]

Your router is reporting that it has a speed of 0.  No idea why of
course, but it shouldn't matter.  Uncomment the lines and make sure
the maxbytes is accurate to the speed of the port.

Eric Brander
Eric_Mailing_List at rednarb dot com

----- Original Message ----- 
From: "David Aragão" <david at aragao.name>
To: <mrtg at list.ee.ethz.ch>
Sent: Monday, January 05, 2004 4:05 PM
Subject: [mrtg] US Robotics router


Hello,

I have been trying to use mrtg with a broadband router without
success.
When I use the cfgmaker I get a mrtg.cfg with the following message
about speed beeing 0...

### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# Target[192.168.0.10_1]: 1:public at 192.168.0.10:
# SetEnv[192.168.0.10_1]: MRTG_INT_IP=""
MRTG_INT_DESCR="Ethernet-WAN"
# MaxBytes[192.168.0.10_1]: 0
# Title[192.168.0.10_1]: Traffic Analysis for 1 --
# PageTop[192.168.0.10_1]: <H1>Traffic Analysis for 1 -- </H1>

and everything is commented out ??

The strange thing is that if I use :

snmpwalk -v 2c -c public 192.168.0.10

I get the following....

SNMPv2-MIB::sysDescr.0 = STRING: USR Broadband Router
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9086
SNMPv2-MIB::sysUpTime.0 = Timeticks: (818800) 2:16:28.00
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysName.0 = STRING:
SNMPv2-MIB::sysLocation.0 = STRING:
SNMPv2-MIB::sysServices.0 = INTEGER: 2
IF-MIB::ifNumber.0 = INTEGER: 1
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifDescr.1 = STRING: Ethernet-WAN
IF-MIB::ifType.1 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifMtu.1 = INTEGER: 1500
IF-MIB::ifSpeed.1 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING: 0:c0:49:d6:63:96
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifLastChange.1 = Timeticks: (818850) 2:16:28.50
IF-MIB::ifInOctets.1 = Counter32: 101351561
IF-MIB::ifInUcastPkts.1 = Counter32: 176856
IF-MIB::ifInNUcastPkts.1 = Counter32: 64796
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 42182219
IF-MIB::ifOutUcastPkts.1 = Counter32: 169410
IF-MIB::ifOutNUcastPkts.1 = Counter32: 19
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 16
IF-MIB::ifSpecific.1 = OID: ccitt
End of MIB


I have trying to read documentation but could fix the settings and
have
mrtg following the proper variables.... (trafic in and trafic out)

Can anyone give me any tip ?

David

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi