[mrtg] Re: CPU W2K SMNP2CA

[Alan Rader]

If I put in one OID that gives a result of 0 so that only one graph line
shows, it graphs pretty stable.  The funny thing is, when I create a
whole separate graph, but referencing the same OID, the newer graph
shows lots of spikes.  This graph almost resembles the CPU usage better
because when watching it in task manager, it jumps from a low percentage
<10 to high percentage > 80 almost constantly.  

If I leave the graph with the big spikes showing on and comment out the
other one, then the one with the spikes calms down.  What could be
happening?

Thanks


-----Original Message-----
From: Rick Klinge [mailto:rick at famhost.com] 
Sent: Wednesday, January 28, 2004 8:58 AM
To: Alan Rader
Subject: RE: [mrtg] CPU W2K SMNP2CA


Maybe it's doing this because of dual queries, for the same graph, to
the same oid? Try duplicating your graph with just one cpu oid per graph
and see if they are the same or not.

~Rick

> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch
> [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of Alan Rader
> Sent: Wednesday, January 28, 2004 7:51 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] CPU W2K SMNP2CA
> 
> 
> I am monitoring my CPU on a W2K server and getting data, but
> I have the same OID for both lines yet getting different 
> values.  I am also using the new SNMP2CA from WSTC.  Below is 
> my config, I only have one CPU, but just called the blue line 
> CPU2 for now until I figure out which one, or both that I 
> need.  I am also doing this same setup for memory using the 
> same OID for both graphs and the blue line stays right on top 
> of the green which seems right to me.  On my below CPU, green 
> is pretty stable and even across, but blue has bunches of 
> spikes.  Also watching my CPU Util in windows task manager, 
> the CPU jumps up and down constantly which is normal for this box.
>  
> So can any one clear up for me why when graphing the same
> OID, blue and green are not lining up?
>  
> Thanks
>  
>  
> ### CPU ###
>  
> Target[inepo1_cpu]:
> .1.3.6.1.4.1.9600.1.1.5.1.5.1.48&.1.3.6.1.4.1.9600.1.1.5.1.5.1
> .48:com at ip
> MaxBytes[inepo1_cpu]: 100
> Unscaled[inepo1_cpu]: dwmy
> Options[inepo1_cpu]: gauge,unknaszero,nopercent,growright 
> WithPeak[inepo1_cpu]: dwmy
> YLegend[inepo1_cpu]: % Utilization
> ShortLegend[inepo1_cpu]: %
> Legend1[inepo1_cpu]: CPU Utilization
> Legend2[inepo1_cpu]: CPU 2 Util
> Legend3[inepo1_cpu]: Max value per interval on graph
> Legend4[inepo1_cpu]: .
> LegendI[inepo1_cpu]: CPU:
> LegendO[inepo1_cpu]: CPU2:
> Title[inepo1_cpu]: INEPO1
> PageTop[inepo1_cpu]: <H1>INEPO1 W2K</H1>
>  
> 

___________________________________________________________________
Virus Scanned and Filtered by http://www.FamHost.com E-Mail System.


--------------------------------------------
ATTENTION:  This message and all attachments are PRIVATE, and may contain
information that is CONFIDENTIAL and PRIVILEGED.  
If you received this message in error, please notify the sender by reply 
e-mail and delete the message immediately.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi