[mrtg] Re: Hello

[John Tan]

Not sure why I received a bounceback, but I tried to restart the daemon
and any configuration changes I did still did not take into effect.
This is what I've done:

Installed Perl and MRTG, used the following command in c:\mrtg\bin:
Step 1:	perl cfgmaker community at x.x.x.x --global "WorkDir: c:\mrtghtml"
--output router.cfg
Step 2:	perl mrtg router.cfg
Step 3:	Added this to router.cfg (which I'm confused, because this
actually works):
		RunAsDaemon: yes
		Interval: 5
Step 4:	Used indexmaker:
		perl indexmaker --output router.htm router.cfg

What I want to do is to have the graph grow from left to right, change
the title of the page to "Traffic Analysis for Serial0" for example.
And change from bytes to bits.  I know it's a simple configuration, but
I can't seem to get it to update.

This is a snip of the router.cfg file:

# Created by 
# cfgmaker lockit4u at 192.168.1.8 --global 'WorkDir: c:\mrtghtml' --output
router.cfg

RunAsDaemon: yes
Interval: 5

### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[growright, bits]: growright, bits

EnableIPv6: no

######################################################################
# System: NyCity
# Description: Cisco Internetwork Operating System Software 
#          IOS (tm) C2600 Software (C2600-I-M), Version 12.2(5d),
RELEASE SOFTWARE (fc1)
#          Copyright (c) 1986-2002 by cisco Systems, Inc.
#          Compiled Sat 02-Feb-02 03:36 by kellythw
# Contact: 
# Location: 
######################################################################


### Interface 1 >> Descr: 'Serial0/0' | Name: 'Se0/0' | Ip: '' | Eth: ''
###

Target[x.x.x.x_1]: 1:community at x.x.x.x:
SetEnv[x.x.x.x _1]: MRTG_INT_IP="" MRTG_INT_DESCR="Serial0/0"
MaxBytes[x.x.x.x _1]: 193000
Title[x.x.x.x _1]: Traffic Analysis for Serial0/0 -- NyCity
PageTop[x.x.x.x _1]: <H1>Traffic Analysis for 1 -- NyCity</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>NyCity in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0/0 "T1 Link to Dover, Serial 0/0"
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>propPointToPointSerial (22)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0/0</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>193.0 kBytes/s</TD></TR>
 </TABLE>
 
WorkDir: c:\mrtghtml

Regards,
John

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Britt Tabor
Sent: Monday, July 12, 2004 1:48 PM
To: John Tan; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Hello

Any changes that you make to the .cfg file will not take affect until
you
restart the mrtg services/daemon



Britt Tabor
I.T. Infrastructure Engineer
Jabil Global Services
727.803.3475  Voice
727.803.5306  Fax



-----Original Message-----
From: John Tan [mailto:jtan at nationalcorp.com] 
Sent: Monday, July 12, 2004 11:39 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Hello

Hello Group,
 

I'm new to this group and new to MRTG.  I believe this is a great
product and look forward to implementing it on our network.  I have some
questions regarding configuration and I've searched thru the archives
but could not find what I needed.  If anyone has the time to email me, I
would appreciate it.  Thank you in advance.

 

So far I've installed MRTG and I am able to see the graphs in the html
folder I directed it to.  Instead of clicking on the html file each time
I want to see the graph, is there a way I can type in an url address in
my browser?  Also, I've tried to edit the cfg file and it doesn't seem
to take into effect the changes.

 

I apologize if this seems very simple, but I'm kinda stumped.

 

Regards,

John

 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi