[mrtg] How to graph errors

[Martin Rheumer]

Carlos,

This is the config we use for errors..

Target[192.168.0.1.4err]: ifInErrors.4&ifOutErrors.4:public at 192.168.0.1
Title[192.168.0.1.4err]: 7513: POS 8/0/0 to Freds
MaxBytes[192.168.0.1.4err]: 440000
Options[192.168.0.1.4err]: Growright, Perminute, Integer, NoPercent
YLegend[192.168.0.1.4err]: Errors/min
ShortLegend[192.168.0.1.4err]: Errors/min
PageTop[192.168.0.1.4err]: <H1>Error Analysis for 7513 S8/0/0 Freds</H1>
  <TABLE>
    <TR><TD>System : </TD><TD>7513</TD></TR>
  </TABLE>

These are of course Interface Errors and not PVC / ATM crc errors.

Depending on which Legend B/s your seing you might need to look at
LegendI, LegendO, Legend1 and Legend2

Martin






Hi,

Did somebody graph errors on Cisco equipment?

I tried to do it, but what the counters reflect on the snmp is not what I can 
read doing a Show Int Serial0 or Show Int Serial0:0, even I don't read CRC 
errors on the In or Out Errors.

On other hand, how can I change the Legend B/s on the errors. I already tried 
with Legend() but didn't worked.

Thanks,

Carlos Alperin
carlos at senecacom.net

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi