[mrtg] Re: Packet Loss Graph Display Problem

[Adam Dale]

Im currently running the MRTG logs through the
rrdTool, and the last two csv output fields of the first
record are displayed as the following.

% Packet Loss <cr><lf> in <cr><lf> % | % Packet Loss <cr><lf> in<cr><lf> %
 100		                                 | 100

So the data is getting into the log files, but not graphing
on the second field. I'm thinking that the problem is
because both field names are identical and cannot be
used in 2.10.14. Where can I change these fields?

Oh, and the AbsMax line is set to 101.

P.S. I also upgraded to the mrtg from
2.9.29 to 2.10.14

Many Thanks

Cheers,



-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Eric Brander
Sent: Wednesday, 28 July 2004 10:48 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Packet Loss Graph Display Problem

Adam Dale wrote:

> Hello all,
> I recently loaded my existing cfg files
> from our windows server to our linux server.
>
> MRTG 2.10.14
> Linux Redhat 9
>
> All runs well except the packet loss graphs
> are only green lines, instead of a blue line
> and green area.
>
> I double checked the mrtg-ping-probe an it
> is producing two values as expected (in/out).
>
> However the graph is only displaying the first
> variable.
>
> Here is a sample of the config.

~snip~

Take a look at the .log file and see if both values are on the 1st line.
    May even want to post the top 5 lines of the log to the list. Also,
is the 2nd value less than AbsMax (101)?

Eric Brander

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi