[mrtg] Re: AS5300 Modem Usage

[Nejaa Halcyon]

Here's a sample of my config. Please note, lines ending with "///"
denote that the line should wrap with the one below it. The "///" is NOT
a part of the config file.

Also, Googling will return a wealth of information about OIDs spesfic to
the Cisco AS5300. Two great resources: Cisco.com and these archives.


################# SNIP ################################################

WorkDir: /usr/mrtg/as
Imagedir: /usr/mrtg/images
Options[_]: bits,growright
Unscaled[_]: dwmy
WithPeak[_]: wmy
 
 
######################################################################
# System: AS5300
# Description: 
# Contact:
# Location: 
######################################################################
  
  
### Interface 2 >> Descr: 'FastEthernet0' | Name: 'Fa0' ###
  
Target[as5300_fa0]: 2:community at xxx.xxx.xxx.xxx
SetEnv[as5300_fa0]: MRTG_INT_IP="xxx.xxx.xxx.xxx" ///
MRTG_INT_DESCR="FastEthernet0"
MaxBytes[as5300_fa0]: 257333
########## Available upstream, not throughput of interface
Title[as5300_fa0]: Traffic Analysis for FastEthernet0
PageTop[as5300_fa0]: <H1>Traffic Analysis for FastEthernet0</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>AS5300</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>Me</TD></TR>
   <TR><TD>Description:</TD><TD>Bandwidth</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>2.0 Mbits/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>XXX.XXX.XXX.XXX</TD></TR>
 </TABLE>
 
                                                   
### Call Stats ###
                                                                      
Target[as5300_calls]: ///
1.3.6.1.4.1.9.10.19.1.1.4.0&1.3.6.1.4.1.9.9.47.1.1.6.0: ///
community at xxx.xxx.xxx.xxx
SetEnv[as5300_calls]: MRTG_INT_IP="xxx.xxx.xxx.xxx" ///
MRTG_INT_DESCR="FastEthernet0"
MaxBytes[as5300_calls]: 184
####################### Number of PRIs / DS0s / modems 
Options[as5300_calls]: gauge,growright
Ylegend[as5300_calls]: # of calls
LegendI[as5300_calls]: T1 Channels
LegendO[as5300_calls]: PPP sessions
Title[as5300_calls]: Call Stats 
PageTop[as5300_calls]: <H1>Call Stats </H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>as5300</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>Me</TD></TR>
   <TR><TD>Description:</TD><TD>Modem Usage</TD></TR>
   <TR><TD>Max Users:</TD>  <TD>184</TD></TR>
 </TABLE>
 
                                                                                #################### !SNIP #########################################



- Nejaa



On Tue, 2004-06-01 at 07:48, Ahmer Zakir wrote:
> Hi, 
> I am pretty new to MRTG and I want to monitor the modem usage for AS5300. I
> will be grateful if somebody can help me in doing this task and provide me
> with the command to generate the .cfg file.
> 
> Thank you in advance.
> 
> 
> 
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi