[mrtg] FW: your mail

[Ana.Moreno at saws.org]

I hate to be a pest but I can't seem to get past this portion. After correcting the command line as was suggested I still end up with an SNMP error:
 
C:\mrtg-2.10.13\bin>perl cfgmaker --snmp-options=:::::2 public at 10.10.10.1 <mailto:nmsnmpv2rosaws at 10.254.1.1>  --global "workdir: c:\www\mrtg" --output mrtg.cfg
--base: Get Device Info on public at 10.10.10.1:::::2 <mailto:nmsnmpv2rosaws at 10.254.1.1:::::2> 
SNMP Error:
no response received
SNMPv2c_Session (remote host: "10.10.10.1" [10.10.10.1].161)
                   community: "public"
                  request ID: -669222043
                 PDU bufsize: 8000 bytes
                     timeout: 2s
                     retries: 5
                     backoff: 1)
SNMPWALK Problem for 1.3.6.1.2.1.1 on public at 10.10.10.1:::::2:v4only <mailto:nmsnmpv2rosaws at 10.254.1.1:::::2:v4only> 
WARNING: Skipping public at 10.10.10.1:::::2 <mailto:nmsnmpv2rosaws at 10.254.1.1:::::2>  as no info could be retrieved
--base: Writing mrtg.cfg

 

 Furthermore, the mrtg.cfg file created does not provide router interface numbers. Does anyone have any other suggestions?

 

 

Thank you,

AL Moreno
210.704.1563

________________________________

From: Tobias Oetiker [mailto:oetiker+r at ee.ethz.ch]
Sent: Tue 6/1/2004 3:36 PM
To: Ana Moreno
Subject: RE: your mail



Today Ana.Moreno at saws.org wrote:

> Tried it with the command as it should be ( C:\mrtg-2.10.13\bin>perl cfgmaker -v 2c public at 10.10.10.1 --global "workdir: c:\www\mrtg" --output mrtg.cfg ) but I still get the same response ( cfgmaker for mrtg-2.10.13 ) any other ideas?

this is the correct answert when you call it with option

-v (as in --version) ...

maybe you mean

--snmp-options=:::::2


cheers
tobi

> Thank you,
> AL Moreno
> 210.704.1563
>
> ________________________________
>
> From: Tobias Oetiker [mailto:oetiker+r at ee.ethz.ch]
> Sent: Tue 6/1/2004 2:56 PM
> To: Ana Moreno
> Subject: Re: your mail
>
>
>
> Today Ana.Moreno at saws.org wrote:
>
> > I am still stuck in the process of attempting to create the default mrtg.cfg file.  Know I get the following when the command is entered.  However, the mrtg.cfg file is not created.  Any suggestions?
> >
> > C:\mrtg-2.10.13\bin>perl cfgmaker -v 2c public at 10.10.10.1 --global "workdir: c:\www\mrtg" --output mrtg.cfg
> > cfgmaker for mrtg-2.10.13
> >
>
> Hi Al,
>
> it seems you are missing a " after c:\www\mrtg
>
> cheers
> tobi
> > Thank you,
> > AL Moreno
> > 210.704.1563
> >
>
> --
>  ______    __   _
> /_  __/_  / /  (_) Oetiker @ ISG.EE, ETZ J97, ETH, CH-8092 Zurich
>  / // _ \/ _ \/ /  System Manager, Time Lord, Coder, Designer, Coach
> /_/ \.__/_.__/_/   http://people.ee.ethz.ch/~oetiker   +41(0)44-632-5286
>
>
>
>

--
 ______    __   _
/_  __/_  / /  (_) Oetiker @ ISG.EE, ETZ J97, ETH, CH-8092 Zurich
 / // _ \/ _ \/ /  System Manager, Time Lord, Coder, Designer, Coach
/_/ \.__/_.__/_/   http://people.ee.ethz.ch/~oetiker   +41(0)44-632-5286




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi