[mrtg] Number of ports up.

[Jeff Cook]

I was wondering if anyone monitors how many ports on a switch are functioning?  If so, how do you do it?  I took at the MIBS and didn't find a OID for this.  Most of my switches are Cisco 3500 or 3500xl.
Thank You


   >
   >Here's the config I use to monitor our 5300's, it may be the same...
   >
   >Target[as5300-1]: 1.3.6.1.4.1.9.10.19.1.1.4.0&1.3.6.1.4.1.9.10.19.1.1.4.0:snmpstring at as5300 
   >YLegend[as5300-1]:Primary AS5300
   >ShortLegend[as5300-1]: users
   >MaxBytes[as5300-1]: 96
   >Unscaled[as5300-1]: dwmy
   >Options[as5300-1]: gauge, unknaszero, growright
   >Title[as5300-1]: Primary AS5300 Users
   >PageTop[as5300-1]: <H1><b>Primary AS5300 Active Users (888 Toll Free Lines)</H1>
   >Legend1[as5300-1]: Active User Connections
   >Legend2[as5300-1]:
   >Legend3[as5300-1]: Max value per interval on graph
   >Legend4[as5300-1]:
   >LegendI[as5300-1]: Users
   >LegendO[as5300-1]:
   > 
   >
   >-----Original Message-----
   >From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bou?nce at list.ee.ethz.ch] On Behalf Of Bryan Decker
   >Sent: Wednesday, May 05, 2004 11:42 AM
   >To: mrtg at list.ee.ethz.ch
   >Subject: [mrtg] MRTG to measure call volumes
   >
   >I am trying to use MRTG to graph out some information for our dial-up gear. I have the correct OIDs (finally), but I'm not getting any data in my graphs. We have a Cisco AS5800 running IOS 12.2-16(a). The OIDs I'm looking at are:
   >1.3.6.1.4.1.9.9.47.1.1.7.0
   >1.3.6.1.4.1.9.9.47.1.1.6.0
   >
   >The SNMP settings on the gear are correct, I believe. There are no errors on the cron-tab, and the graph page says it's updated. Any ideas on what I've done wrong?
   >
   >Thanks
   >Bryan
   >Bryan Decker
   >Network and IP Engineer
   >Smithville Telephone Company
   >
   >--
   >Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
   >Archive     http://www.ee.ethz.ch/~slist/mrtg
   >FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
   >WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.c??gi
   >
   >--
   >Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
   >Archive     http://www.ee.ethz.ch/~slist/mrtg
   >FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
   >WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
   >
   >


-- Attached file removed by Ecartis and put at URL below --
-- Type: application/ms-tnef
-- Size: 2k (2764 bytes)
-- URL : http://www.ee.ethz.ch/~slist/p/4099634B15848-winmail.dat


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi