[mrtg] MRTG losing Bytes in Octet string

[Rene Buechler]

Hi
I'm using MRTG 2.10.13 on a Windows NT workstation.
I'm scanning on our Ficon Directors FC/9000 (CNT) the Rx- and TxFrames to
check the utilisation of each FC-Port.
These Directors will give me back a 64-Bit counter value as an octet
string.
To convert this octet string I'm using the option ConversionCode and a
small perl script.
Now I have seen, that some values from the counters are wrong. I've found,
that when inside an octet string is a Hex Byte with 0x0a or 0x0d these
bytes gets lost. In this case, MRTG will handover to my subroutine only
seven Bytes instead of 8 Bytes. I made a lot of tests and testet each hex
code from 00 ... FF. Every hex code is ok except the two ones with Hex
codes 0x0a and 0x0d which gets lost.

Had someone allready this problem?

Regards Rene Buechler







******************* PLEASE NOTE *******************
This message, along with any attachments, may be confidential or legally
privileged.  It is intended only for the named person(s), who is/are the
only authorized recipients. If this message has reached you in error,
kindly destroy it without review and notify the sender immediately. Thank
you for your help.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi