[mrtg] Re: Unable to poll POS interface input rate

[Koelstra, J. (Jan)]

Yusri,

First thing that comes in mind: The Maxbytes value in your MRTG config file is probably too low. Everything above the Maxbytes value is ignored in the graphs

If the maxbytes value is right I can't say what is wrong without seeing the relevant parts of your mrtg config file. The first lines of the .log file for this interface can be helpfull too.

Hth,

Jan.

-----Original Message-----
From: yusri [mailto:yusri at starhub.net.sg]
Sent: Saturday, November 06, 2004 7:10 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Unable to poll POS interface input rate


Hi aLL

Not sure if anyone has encounter this,

Recently the MRTG on my windows server 2003 was unable to poll the input rate of Cisco7500 router POS Interface. It was running fine for a week before it stopped polling. There was no problem though polling the output rate. Ran an snmpwalk and noticed the oID has not changed one bit. Input rate on the pos interface is incrementing, doubt there is any issue with the CISCO router. Cisco TAC does not identify any IOS bug related. Restarted polling and created a new cfg file, but symptoms still remains..

Anyone has similar experience to share with and a workaround for this?

regards
Yusri

Powered by Gee! - Wireless Access Anywhere

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail.
Aan dit bericht kunnen geen rechten worden ontleend.

Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van dit bericht te vernietigen.
_________________________________________________________

The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt.
This message shall not constitute any obligations.

This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and delete its content.
_________________________________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi